Age | Commit message (Collapse) | Author | Files | Lines |
|
New BFD UDP errors were no longer compatible with BFD errors. This was causing
out-of-bound reads and ASAN test crashes.
Fix this issue by statically checking if these enums are compatible.
Type: fix
Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru>
Change-Id: I92fddd26270f946bc16ade840c94e5496e2cb88a
|
|
Outgoing packets can be now traced via:
trace add bfd-process <count>
Type: improvement
Change-Id: Ia19af6054289b18f55e518dbea251a2bee9b9457
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
|
|
Type: improvement
This method allows the assignment of a severity to the error.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Id1a414a88018390d03bd6b16bd048a98903bab5a
|
|
Type: improvement
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8907fecde6d48f5362f0f91372d5a9a1bba6f931
|
|
When incrementing node counters with vlib_node_increment_counter
the local error index should be passed in. vlib_node_increment_counter
adds the local index to the nodes base index to get the counter to
write to. If we pass in the global counter index, the offset gets
added again in the fn, and we then potentially write into memory that
is not part of the counter vector.
Type: fix
Signed-off-by: Paul Atkins <patkins@graphiant.com>
Change-Id: I43be33a51bcb52d520495d326b971c1d848d96b5
|
|
Checking for existence of source address on interface prevents creating
session before assigning address to said interface. Removing this check
allows more flexibility when configuring BFD feature.
Type: improvement
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: Ia57960e29b5dbdb758a7a64193c28f21482f229e
|
|
Type: refactor
Change-Id: Ifd533a095d979dc55bfbe5fac7e0b7510a4d900c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
When the adj subsystem is notified of a BFD session, it attempts to find the appropriate adjacency from the session's key.
This could lead to a mismatch between the adj used by BFD and that of FIB. The BFD session stores the adj it is using, so FIB uses that instead.
Since adj is now using the same adj as BFD, it does not need to maintain its own locks.
In BFD it is necessary to initialise the adj index used in INVALID and ensure it is not unlock before listeners are notified of the session delete.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I9630867b10bb18969475299a0c754942a8df0f44
|
|
Type: fix
The adjacency used is then the same one as that used by routes in the FIB and so the BFD protection/fast-failover works for thise route, since they are children of the BFD protected adjacency.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I72e10b3074697cba8a002a4c1acf690983985157
|
|
Add udp total session counts - as stat segment entries:
/bfd/udp4/sessions
/bfd/udp6/sessions
and per session packet/byte counters:
/bfd/rx-session-counters
/bfd/rx-session-echo-counters
/bfd/tx-session-counters
/bfd/tx-session-echo-counters
These counters are per-thread and per-session id.
Adjust tests to verify proper function.
Type: refactor
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: Ie597928022b6ac74c2220019b9e8e1714295f170
|
|
This change fixes multiple unused parameter warnings, narrowing
conversion warnings and identical switch statement warnings.
Type: refactor
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: I4140e939c409ce06cc5aaaf5e1b042681f7ca448
|
|
Type: improvement
helps keep the agents stateless
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I3588f13c081e24f5a8083b490eb02856361e4ccb
|
|
ip6_get_link_local_address() may return NULL if the local interface
is not (or not yet) configured
Type: fix
Signed-off-by: Frédéric Perrin <fred@fperrin.net>
Change-Id: I42bf2081582c4a36fa4e32145ca2f0ff73488110
|
|
Type: improvement
Change-Id: I873a99c1258a97ed5ed195b9756e8302f865e7f0
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: refactor
Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id13f33843b230a1d169560742c4f7b2dc17d8718
|
|
Type: refactor
Change-Id: I04e71a64e676910dc4c6cbc1ab54ffb0c29aa5b9
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: Ia3dacd2628591f7ba9710e8e4d68df97ae21935c
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Multiple API message handlers call vnet_get_sup_hw_interface(...)
without checking the inbound sw_if_index. This can cause a
pool_elt_at_index ASSERT in a debug image, and major disorder in a
production image.
Given that a number of places are coded as follows, add an
"api_visible_or_null" variant of vnet_get_sup_hw_interface, which
returns NULL given an invalid sw_if_index, or a hidden sw interface:
- hw = vnet_get_sup_hw_interface (vnm, sw_if_index);
+ hw = vnet_get_sup_hw_interface_api_visible_or_null (vnm, sw_if_index);
if (hw == NULL || memif_device_class.index != hw->dev_class_index)
return clib_error_return (0, "not a memif interface");
Rename two existing xxx_safe functions -> xxx_or_null to make it
obvious what they return.
Type: fix
Change-Id: I29996e8d0768fd9e0c5495bd91ff8bedcf2c5697
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Support an adjacency with lookup_next_index of IP_LOOKUP_NEXT_MIDCHAIN
so tunnel interfaces can have BFD configured on them.
Also, check if the interface a session is configured on is up
and skip assembling the packet and calculating the checksum if
the interface is down.
Change-Id: I44f76478d0fc1592e3491dd9368819a5c957e74a
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: Iffb4b314be3ded0d9c6acb77ec1c6f22778f301d
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Ia083050389853c25b069f0f8286d50d3f4aef527
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Remove the expensive RPC call for every received packet and replace it with
lock-protected direct calls. Reinstate RPC for the less frequent
notification traffic.
Adjust the wakeup event sending logic to minimize the number of events
sent, by measuring the time it takes from sending the event to processing
it, and subsequently not sending the event if the pending wake-up time
is within 2x or the event propagation delay.
Eventually: remove oingo / oingoes.
Change-Id: I0b3d33c5d029527b54867a97ab07f35f346aaa3d
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Signed-off-by: Steve Shin <jonshin@cisco.com>
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: If9f1f8c16c098c453bb53591e50a4cbd7cb192e4
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I2b50e3fc06b4e905395d4706083f12ebc76826ce
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: Ieac9cf50156dbbb4962411e900d59256441915ef
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I123eccea98abafeb31f25d2a162501e2eded60d4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
To save space in the first cacheline following is changed:
- total_length_not_including_first_buffer moved to the 2nd cacheline.
This field is used only when VLIB_BUFFER_TOTAL_LENGTH_VALID and
VLIB_BUFFER_NEXT_PRESENT are both set.
- free_list_index is now stored in 4bits inside flags, which
allows up to 16 free lists. In case we need more we can store index
in the 2nd cachelin
Change-Id: Ic8521350819391af470d31d3fa1013e67ecb7681
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Instead, drop the BFD session associated with it..
Change-Id: Ie09877d5c94844be2e833900d9dde7f23edaf8cd
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Make BFD ARP-aware when sending out packets.
Fix a few one-liner bugs discovered while integrating with cisco
nexus. Enhance CLI view to better observe session state.
Change-Id: I266c29492f351207b84328ab665d9d697969da9c
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I06a23d24340c5527f3848177d2178bf3e55f7614
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I0371e8e3c94bb793e3c64d5f51aaebf19dddc4b4
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Implement command line interface to the BFD binary APIs. Add
corresponding unit tests.
Change-Id: Ia0542d0bc4c8d78e6f7b777a08fd94ebfe4d524f
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I49e5ce0aae6e4ff634024387ceaf7dbc432a0351
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ib1e301d62b687d4e42434239e7cd412065c28da0
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I772b63ac25ebfccaff9ab9d8d0b1445e85f21df7
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Id294dbbd6499ae8221cc8143e1027adc08866ae6
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I1c93f96a752eb2ffd1117a656552131cde1fa489
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I666e5c0cc71a3693640960c93cdd1907f84fbe23
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Add authentication support to BFD feature. Out of three existing
authentication types, implement SHA1 (sole RFC requirement). Simple
password is insecure and MD5 is discouraged by the RFC, so ignore
those.
Add/change APIs to allow configuring BFD authentication keys
and their usage with BFD sessions.
Change-Id: Ifb0fb5b19c2e72196d84c1cde919bd4c074ea415
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Avoid coverity warning and improve safety by declaring a helper
structure and working with it when searching for ip headers.
Make sure the content following IPv6 header is actually UDP before
parsing it. Bail out if unexpcted IPv6 header found ...
Change-Id: I1c6b9fd42d6fdae226f12c91c53c07a932b29522
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I40deb8b40f5d3a96d2c0dcb400f489cd05a64348
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Iaa9538c7cca500c04cf2704e5bf87480543cfcdf
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Fix reporting of bs_index in the return message. Enhance test suite
to cover this case.
Change-Id: I37d35b850818bc1a05abe67ca919c22aeac978b6
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I7f09b45c926557d2ad0e2706b38fa56ff8194a3d
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23
Signed-off-by: Damjan Marion <damarion@cisco.com>
|