summaryrefslogtreecommitdiffstats
path: root/src/vnet/bonding/cli.c
AgeCommit message (Collapse)AuthorFilesLines
2020-12-14misc: move to new pool_foreach macrosDamjan Marion1-8/+8
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-11-13ethernet: mac must support 64-bits loadsBenoît Ganne1-2/+2
ethernet dataplane loads MAC addresses as 64-bits loads for efficiency. We must make sure it is valid, especially for the vector of secondary MACs. Type: fix Change-Id: I851e319b8a973c154e85ff9f05f3b8e385939788 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-07-28bonding lacp: replace slave string with memberSteven Luong1-221/+225
- Replace textual string slave with member except APIs. - For APIs, mark the existing APIs as deprecated and introduce new APIs - While introducing sw_bond_interface_dump, add the optional filter by sw_if_index and enhance the testcases to make use of it. Type: improvement Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ib6626c514e45350308aeeda0decb70f3aba2f63e
2020-05-29bonding: Revert adjust link stateMatthew Smith1-20/+3
This reverts commit 9121c415a91904be50071ec55143d9c89b2f1b91. Reason for revert: causes deadlock with multiple worker threads Type: fix Change-Id: Icf3d6d343d99d887abacbaa03acbf04d4628514e Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-05-27bonding: adjust link state based on active slavesMatthew Smith1-3/+20
Type: improvement Bond link state is being maintained inconsistently. It is initially set to up. If the bond interface admin state is set to down, the link state is set to down. If the bond interface admin state is set to up, the link state is only set to up if there are active slave interfaces at that point. If slaves become active at some later time, it does not get updated. Its next chance to be updated is the next time the bond interface is set to admin up. To address this, do not set the link state to up after creating a bond. Adjust the link state as slave interfaces are attached or detached based on whether the bond is getting its first active slave or losing its last one. Unit test added to verify correct maintenance of link state. Change-Id: I31f17321f7f0e727e1ab1e01713423af6566dad9 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-05-16l2: L2/L3 mode swicth cleanup and l2-patch fixJohn Lo1-6/+5
Cleanup L2/L3 mode switch to not redirect to/from ethernet-input node as it is no longer necessary. L2 patch should use sw_if_index for device feature enable/disable. Type: fix Signed-off-by: John Lo <loj@cisco.com> Change-Id: I0f24161d027b07c188fd1e05276146f94c075710
2020-05-13bonding: fix the GSO flagsMohsin Kazmi1-2/+8
Type: fix Only add GSO and Checksum offload flags when gso is enabled. Change-Id: I58945a4ffbb9a0e6a8640fc01424c63feef16306 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-04-06bonding: Add GSO supportSteven Luong1-2/+19
Add GSO support, configurable from the CLI. Type: feature Ticket: VPP-1820 Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I65885a071b24c74437e6cfe5eff237b01bc1744b (cherry picked from commit a06f68556e506a6ff7f31a617a036614c84f71c0)
2020-02-18misc: fix coverity warningsDave Barach1-2/+2
Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I402b1b06db736b2a7a242ce70ffd409c7c0a4fc2
2019-12-13bonding: Add /if/lacp/<bond-sw_if_index>/<slave-sw_if_index>/partner-stateSteven Luong1-11/+19
We already had /if/lacp/<bond-sw_if_index>/<slave-sw_if_index>/state in the stats segment. Add also the partner-state to be complete. Change to populate stats segment with the states at startup, after processing an lacp pdu, and after timer expiration. Unit test --------- sudo vpp_get_stats dump | grep /if/lacp 63.00 /if/lacp/3/1/state 61.00 /if/lacp/3/1/partner-state 63.00 /if/lacp/3/2/state 61.00 /if/lacp/3/2/partner-state Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ib7b8e1183d572bb6e422a846aaa2b7b3559a0dc7
2019-12-02bonding: add/del secondary mac address callbackMatthew Smith1-0/+32
Type: feature Add a callback to the bond device class which allows a secondary mac address to be added/deleted. The desired operation is performed on all the hardware interfaces which belong to the bond interface. This allows virtual MAC addresses to be used on bond interfaces without requiring the hardware interfaces to have promiscuous mode enabled. When a hardware interface is added or removed from a bond, if there are any secondary MAC addresses configured on the bond, they are added or removed from the hardware interface. Change-Id: If9488078b4d7869ecc56ef6853f3cc9891211860 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-11-12bonding: fix non-null terminated vectorBenoît Ganne1-2/+2
Type: fix Change-Id: Iea7d73a304236b525b95bdad3bfdb41e711f8cdb Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-24lacp: add actor steady state check prior to skip processing lacp pduSteven Luong1-23/+26
In a rare event, we may be skipping processing lacp pdu's when the it is not in steady state. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I3595d22dbff8a97dce9fb4d4452d2051bcf6f523
2019-10-17bonding: fix interface deletionBenoît Ganne1-15/+7
Copy sw_if_index value instead of using pointers to original bif->slaves content which could be overriden by eg. vec_del1(). Type: feature Change-Id: I37e458effd6b2367479574f7bd3facd4e93bada4 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-11bonding: feature arc may not be enabled for the slave interfaceSteven Luong1-2/+2
vnet_feature_enable_disable takes sw_if_index, not hw_if_index. If there is a subinterface created prior to the slave interface is created, sw_if_index and hw_if_index start to diverge and the problem will happen. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I11e1f099378832f83b748526c6cbeb56960fad3c
2019-09-30bonding: fix non-null-terminated C-stringBenoît Ganne1-2/+8
Type: fix Change-Id: Ibb7ba878b049b8b18e890c43fdd6324cb88d63b8 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-09-06bonding: add weight support for active-backup modeSteven Luong1-76/+198
Not all interfaces have the same characteristics within the bonding group. For active-backup mode, we should do our best to select the slave that performs the best as the primary slave. We already did that by preferring the slave that is local numa. Sometimes, this is not enough. For example, when all are local numas, the selection is arbitrary. Some slave interfaces may have higher speed or better qos than the others. But this is hard to infer. One rule does not fit all. So we let the operator to optionally specify the weight for each slave interface. Our primary slave selection rule is now 1. biggest weight 2. is local numa 3. current primary slave (to avoid churn) 4. lowest sw_if_index (for deterministic behavior) This selection rule only applies to active-backup mode which only one slave is used for forwarding traffic until it becomes unreachable. At that time, the next "best" slave candidate is automatically promoted. The slaves are sorted according to the preference rule when they are up. So there is no need to find the next best candidate when the primary slave goes down. Another good thing about this rule is when the down slave comes back up, it is selected as the primary slave again unless there is indeed a "better" slave than this down slave that were added during that period. To set the weight for the slave interface, do this after the interface is enslaved set interface bond <interface-name> weight <value> Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I59ced6d20ce1dec532e667dbe1afd1b4243e04f9
2019-09-04stats: add /if/<n>/<n>/state for lacp interface stateSteven Luong1-2/+29
Add /if/lacp/<bond-sw_if_index>/<slave-sw_if_index>/state <bond-sw_if_index> is a vector of the bond sw_if_index <slave-sw_if_index> is a vector of the slave sw_if_index Content is the integer value of the lacp actor state. The state is actually a bitfield as described in the lacp protocol spec. Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ic6eca8ce2a1acd2d858e4e50b7eac1d000ea08e5 Signed-off-by: Ole Troan <ot@cisco.com>
2019-08-17bonding lacp: deleting virtual interface which was enslaved may cause crashSteven Luong1-3/+3
Virtual interfaces may be part of the bonding like physical interfaces. The difference is virtual interfaces may disappear dynamically. As an example, the following CLI sequence may crash the debug image create vhost-user socket /tmp/sock1 create bond mode lacp bond add BondEthernet0 VirtualEthernet0/0/0 delete vhost-user VirtualEhernet0/0/0 Notice the virtual interface is deleted without first doing bond delete. The proper order is to first remove the slave interface from the bond prior to deleting the virtual interface as shown below. But we should handle it anyway. create vhost-user socket /tmp/sock1 create bond mode lacp bond add BondEthernet0 VirtualEthernet0/0/0 bond del VirtualEthernet0/0/0 <----- delete vhost-user VirtualEhernet0/0/0 The fix is to register for VNET_SW_INTERFACE_ADD_DEL_FUNCTION and remove the slave interface from the bond if the to-be-deleted interface is part of the bond. We check the interface that it is actually up before we send the lacp pdu. Up means both hw and sw admin up. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: If4d2da074338b16aab0df54e00d719e55c45221a
2019-07-24bonding: print the name on the cli when createdMohsin Kazmi1-0/+6
Type: feature Change-Id: Icd718c98ba2fa900cafaf1a59dfb100ee9914ec9 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-07-22bonding: fix create bond CLIZhiyong Yang1-1/+1
1. "numa-only" is optional and is disabled by default for lacp mode. 2. update lacp doc. Type: fix Change-Id: I6a3a8423ef31ad9980353a796957693cd6205d73 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-07-19bonding: add support for numa-only in lacp modeZhiyong Yang1-2/+34
If numa-only is set, Only slaves on local numa node transmit pkts if have at least one, otherwise the bond interface works as usual. CLI change: create bond mode lacp [load-balance { l2 | l23 | l34 } {numa-only}] [hw-addr <mac-address>] [id <if-id>] The new member "u8 numa_only;" is also added to bond_create_if_args_t. Type: feature Change-Id: Icdccedafb0738d8c9d4a5acce909ce562428c071 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-31bonding: add support for numa awarenessZhiyong Yang1-12/+80
This patch enables bonding numa awareness on multi-socket server working in active-backeup mode. The VPP adds capability for automatically preferring slave with local numa node in order to reduces the load on the QPI-bus and improve system overall performance in multi-socket use cases. Users doesn't need to add any extra operation as usual. Change-Id: Iec267375fc399a9a0c0a7dca649fadb994d36671 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-01-23bond: packet drops on VPP bond interface [VPP-1544]Steven1-3/+5
We register callback for VNET_HW_INTERFACE_LINK_UP_DOWN_FUNCTION and VNET_SW_INTERFACE_ADMIN_UP_DOWN_FUNCTION to add and remove the slave interface from the bond interface accordingly. For static bonding without lacp, one would think that it is good enough to put the slave interface into the ective slave set as soon as it is configured. Wrong, sometimes the slave interface is configured to be part of the bonding without ever bringing up the hardware carrier or setting the admin state to up. In that case, we send traffic to the "dead" slave interface. The fix is to make sure both the carrier and admin state are up before we put the slave into the active set for forwarding traffic. Change-Id: I93b1c36d5481ca76cc8b87e8ca1b375ca3bd453b Signed-off-by: Steven <sluong@cisco.com>
2019-01-13bonding: support custom interface IDsAlexander Chernavin1-2/+22
Change-Id: I78fe58144fa3ba2e1c7135897a13a2541f235c91 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2018-10-23c11 safe string handling supportDave Barach1-5/+5
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-17bond: tx optimizationsDamjan Marion1-1/+1
Break up bond tx function into multiple small workloads: 1. parse the packet header and hash it based on the configured algorithm 2. optionally, trace the packet 3. convert the hash value from (1) to the slave port 4. update the buffers with the slave sw_if_index 5. Add the buffers to the queues 6. Create and send the frames old numbers ----------- Time 5.3, average vectors/node 223.74, last 128 main loops 40.00 per node 222.61 vector rates in 3.3627e6, out 6.6574e6, drop 3.3964e4, punt 0.0000e0 Name State Calls Vectors Suspends Clocks Vectors/Call BondEthernet0-output active 68998 17662979 0 1.89e1 255.99 BondEthernet0-tx active 68998 17662979 0 2.60e1 255.99 TenGigabitEthernet3/0/1-output active 68998 8797416 0 1.03e1 127.50 TenGigabitEthernet3/0/1-tx active 68998 8797416 0 7.85e1 127.50 TenGigabitEthernet7/0/1-output active 68996 8865563 0 1.02e1 128.49 TenGigabitEthernet7/0/1-tx active 68996 8865563 0 7.65e1 128.49 new numbers ----------- BondEthernet0-output active 304064 77840384 0 2.29e1 256.00 BondEthernet0-tx active 304064 77840384 0 2.47e1 256.00 TenGigabitEthernet3/0/1-output active 304064 38765525 0 1.03e1 127.49 TenGigabitEthernet3/0/1-tx active 304064 38765525 0 7.66e1 127.49 TenGigabitEthernet7/0/1-output active 304064 39074859 0 1.01e1 128.51 Change-Id: I3ef9a52bfe235559dae09d055c03c5612c08a0f7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-06bond: active-backup mode is using the wrong load balance algoSteven1-2/+4
active-backup mode is using l2 load balance algo. It should be using active-backup. Also notice that the output is missing a character. vpp# create bond mode active-backup create bond mode active-backup vpp# sh bond sh bond interface name sw_if_index mode load balance active slaves slaves BondEthernet0 6 xor l34 2 2 BondEthernet1 9 xor l34 1 1 BondEthernet2 10 active-backu l2 0 0 vpp# Change-Id: If5ed0cc6c25f6c2ddabec15ff6188b34923d38e3 Signed-off-by: Steven <sluong@cisco.com>
2018-09-28bond: tx performance enhancement part deuxSteven1-10/+19
- Reduce per packet cost by buffering the output packet buffer indexes in the queue and process the queue outside the packet processing loop. - Move unnecessary variable initialization outside of the while loop. - There is no need to save the old interface if tracing is not enabled. Test result for 256 bytes packet comparison. Other packet size shows similar improvement. With the patch -------------- BondEthernet0-output active 52836 13526016 0 1.71e1 256.00 BondEthernet0-tx active 52836 13526016 0 2.68e1 256.00 TenGigabitEthernet6/0/0-output active 52836 6762896 0 9.17e0 127.99 TenGigabitEthernet6/0/0-tx active 52836 6762896 0 6.97e1 127.99 TenGigabitEthernet6/0/1-output active 52836 6763120 0 9.40e0 128.00 TenGigabitEthernet6/0/1-tx active 52836 6763120 0 7.00e1 128.00 bond-input active 52836 13526016 0 1.76e1 256.00 Without the patch ----------------- BondEthernet0-output active 60858 15579648 0 1.73e1 256.00 BondEthernet0-tx active 60858 15579648 0 2.94e1 256.00 TenGigabitEthernet6/0/0-output active 60858 7789626 0 9.29e0 127.99 TenGigabitEthernet6/0/0-tx active 60858 7789626 0 7.01e1 127.99 TenGigabitEthernet6/0/1-output active 60858 7790022 0 9.31e0 128.00 TenGigabitEthernet6/0/1-tx active 60858 7790022 0 7.10e1 128.00 bond-input active 60858 15579648 0 1.77e1 256.00 Change-Id: Ib6d73a63ceeaa2f1397ceaf4c5391c57fd865b04 Signed-off-by: Steven <sluong@cisco.com>
2018-09-26bond: tx perf improvementsDamjan Marion1-1/+0
Change-Id: I0c3f2add35ad9fc11308b7a2a2c69ffd8472dd2e Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-25bond: crash when deleting bond interface [VPP-1427]Steven1-2/+5
After the slave interface is removed from bond, bond input node still receives traffic for the slave interface. We have to disable feature arc for the corresponding slave interface. Change-Id: I44e7001e6685e290b032c48147d02911a55d547b Signed-off-by: Steven <sluong@cisco.com>
2018-06-05bond: send gratuitous arp when the active slave went down in active-backup modeSteven1-0/+19
- Modify the API send_ip6_na and send_ip4_garp to take sw_if_index instead of vnet_hw_interface_t and add call to build_ethernet_rewrite to support subinterface/vlan - Add code to bonding driver to send an event to bond_process when the first interface becomes active or when the active interface is down - Create a bond_process to walk the interface and the corresponding subinterfaces to send garp/ip6_na when an event is received. - Minor cleanup in bonding/node.c Note: dpdk bonding driver does not send garp/ip6_na for subinterfaces. There is no attempt to fix it here. But the infra is now done and should be easy to add the support. Change-Id: If3ecc4cd0fb3051330f7fa11ca0dab3e18557ce1 Signed-off-by: Steven <sluong@cisco.com>
2018-05-25bond: performance harvestingSteven1-4/+11
- hash is great. But it is a bit too slow for the DP. Use direct array indexing to quickly retrieve the slave interface. - the algorithm used by flow hash is great. But it is a bit too slow for the DP. Use l2_hash_hash() extracted from lb_hash.h which ECMP is using. It makes use of intrinsic crc32 instruction set. - shortcut modulo arithmetic when the operand is 2**x (where x up to 4) to avoid division instruction. - special case for link count == 1 in bond_tx_fn() - use clib_mem_unaligned to access data for the packet to avoid alignment error - Fix some typos for packet tracing. Change-Id: I8eae3ad497061c5473aa675ba894ee0211120d25 Signed-off-by: Steven <sluong@cisco.com>
2018-04-24lacp: deleting the bond subinterface may cause lacp to lose the partner ↵Steven1-9/+1
[VPP-1251] Problem: When the bond subinterface is removed, it was observed that we lost the lacp partner. Show hardware shows rx counter goes up, but show interface does not for the slave interfaces. Cause: We reset the interface promiscuous mode when the bond subinterface is deleted. This causes dpdk not to accept any packet. Leave the interface in promiscuous mode fixes the problem. Other fixes: There are few places we use hw_if_index as if they are sw_if_index. But they don't necessarily have the same value. As soon as a subinterface is created, they start to diverge. The fix is to use the correct API for the hw_if_index and sw_if_index. Change-Id: I1e6b8bca0a4aae396d217a141271cbf968500c91 Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit 42c6599bf3057a7e8f4f00f5b6a9dd72af48d283)
2018-04-13bond: ping fails between l2 BD [VPP-1238]Steven1-15/+33
In dpdk based bonding, when the bond interface is configured for l2, it automatically sets the bond interface to promiscuous mode and sets rx redirect to ethernet-input. This allows traffic to be bridged to non compute node facing interface when it is received from the compute node interface. For native vpp bonding, we need to do similar things. When the bond interface is configured for l2, we set the slave interfaces to promiscuous mode and set rx redirect to ethernet-input because dpdk does not know anything about the bond interface. Likewise, when a new interface is enslaved, we also need to do the same thing if the bond interface has already been configured for l2. Change-Id: I7e168008e8a4221be74929b2a20e6db0ce8f3110 Signed-off-by: Steven <sluong@cisco.com>
2018-03-30bond: show trace causes a crash if the interface is deletedSteven1-3/+14
For the debug image, if the interface is removed and the trace was collected prior to the interface delete, show trace may cause a crash. This is because vnet_get_sw_interface_name and vnet_get_sup_hw_interface are not safe if the interface is deleted. The fix is to use format_vnet_sw_if_index_name if all we need is to get the interface name in the trace to display. It would show "DELETED" which is better than a crash. Change-Id: I912402d3e71592ece9f49d36c8a6b7af97f3b69e Signed-off-by: Steven <sluong@cisco.com>
2018-03-28bond: cli renameSteven1-11/+10
rename "enslave interface <slave> to <BondEthernetx>" to "bond add <BondEthernetx> <slave> "detach interface <slave>" to "bond del <slave>" Change-Id: I1bf8f017517b1f8a823127c7efedd3766e45cd5b Signed-off-by: Steven <sluong@cisco.com>
2018-03-22bond: performance enhancementSteven1-0/+16
We were only puting one packet per frame to the output node. Change to buffer multiple packets per frame. Performance is now on top of dpdk-based bonding. Put a spinlock in the tx thread in case the rug is pulled under us. Change-Id: Ifda5af086a984a7301972cd6c8e428217f676a95 Signed-off-by: Steven <sluong@cisco.com>
2018-03-21bond: Add bonding driver and LACP protocolSteven1-0/+706
Add bonding driver to support creation of bond interface which composes of multiple slave interfaces. The slave interfaces could be physical interfaces, or just any virtual interfaces. For example, memif interfaces. The syntax to create a bond interface is create bond mode <lacp | xor | acitve-backup | broadcast | round-robin> To enslave an interface to the bond interface, enslave interface TenGigabitEthernet6/0/0 to BondEthernet0 Please see src/plugins/lacp/lacp_doc.md for more examples and additional options. LACP is a control plane protocol which manages and monitors the status of the slave interfaces. The protocol is part of 802.3ad standard. This patch implements LACPv1. LACPv2 is not supported. To enable LACP on the bond interface, specify "mode lacp" when the bond interface is created. The syntax to enslave a slave interface is the same as other bonding modes. Change-Id: I06581d3b87635972f9f0e1ec50b67560fc13e26c Signed-off-by: Steven <sluong@cisco.com>