summaryrefslogtreecommitdiffstats
path: root/src/vnet/bonding/node.c
AgeCommit message (Collapse)AuthorFilesLines
2019-10-16bonding: graph node running after bond-input in feature arc may crashSteven Luong1-3/+35
In bond RX quad loop, when all packets within the frame have the same incoming interface, we cannot skip calling bond_update_next because that function calls vnet_feature_next() to update the b->current_config_index. The next node needs the correct b->current_config_index to work with. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I3d8b3d4e0f95490f406fae7638f0c43c301ce664
2019-08-17bonding lacp: deleting virtual interface which was enslaved may cause crashSteven Luong1-20/+13
Virtual interfaces may be part of the bonding like physical interfaces. The difference is virtual interfaces may disappear dynamically. As an example, the following CLI sequence may crash the debug image create vhost-user socket /tmp/sock1 create bond mode lacp bond add BondEthernet0 VirtualEthernet0/0/0 delete vhost-user VirtualEhernet0/0/0 Notice the virtual interface is deleted without first doing bond delete. The proper order is to first remove the slave interface from the bond prior to deleting the virtual interface as shown below. But we should handle it anyway. create vhost-user socket /tmp/sock1 create bond mode lacp bond add BondEthernet0 VirtualEthernet0/0/0 bond del VirtualEthernet0/0/0 <----- delete vhost-user VirtualEhernet0/0/0 The fix is to register for VNET_SW_INTERFACE_ADD_DEL_FUNCTION and remove the slave interface from the bond if the to-be-deleted interface is part of the bond. We check the interface that it is actually up before we send the lacp pdu. Up means both hw and sw admin up. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: If4d2da074338b16aab0df54e00d719e55c45221a
2019-07-25bonding: incorrect RX counters for bond interfaceSteven Luong1-39/+36
show interface does not display the RX counters for the bond interfaces. It displays rx-no-buf instead. The problem is VNET_INTERFACE_COUNTER_RX is a combined counter, not a simple counter. Change the code to use vlib_increment_combined_counter passing it with n_rx_packets and n_rx_bytes. Type: fix Change-Id: I8121ad7e546447049fa13da62481b6c8f5575bec Signed-off-by: Steven Luong <sluong@cisco.com>
2019-02-14Add -fno-common compile optionBenoît Ganne1-0/+2
-fno-common makes sure we do not have multiple declarations of the same global symbol across compilation units. It helps debug nasty linkage bugs by guaranteeing that all reference to a global symbol use the same underlying object. It also helps avoiding benign mistakes such as declaring enum as global objects instead of types in headers (hence the minor fixes scattered across the source). Change-Id: I55c16406dc54ff8a6860238b90ca990fa6b179f1 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-01-23bond: packet drops on VPP bond interface [VPP-1544]Steven1-17/+16
We register callback for VNET_HW_INTERFACE_LINK_UP_DOWN_FUNCTION and VNET_SW_INTERFACE_ADMIN_UP_DOWN_FUNCTION to add and remove the slave interface from the bond interface accordingly. For static bonding without lacp, one would think that it is good enough to put the slave interface into the ective slave set as soon as it is configured. Wrong, sometimes the slave interface is configured to be part of the bonding without ever bringing up the hardware carrier or setting the admin state to up. In that case, we send traffic to the "dead" slave interface. The fix is to make sure both the carrier and admin state are up before we put the slave into the active set for forwarding traffic. Change-Id: I93b1c36d5481ca76cc8b87e8ca1b375ca3bd453b Signed-off-by: Steven <sluong@cisco.com>
2018-11-18add vlib_prefetch_buffer_data(...) macroDamjan Marion1-8/+4
Change-Id: Iba750a41262cc028ad0363fff78cc219e4a33538 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach1-2/+2
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-08-13Multiarch handling in different constructor macrosDamjan Marion1-5/+0
This significantly reduces need for ... in multiarch code. Simply constructor macros will jost create static unused entry if CLIB_MARCH_VARIANT is defined and that will be optimized out by compiler. Change-Id: I17d1c4ac0c903adcfadaa4a07de1b854c7ab14ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-19Remove unused argument to vlib_feature_nextDamjan Marion1-1/+1
Change-Id: Ieb8b53977fc8484c19780941e232ee072b667de3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-11avoid using thread local storage for thread indexDamjan Marion1-2/+2
It is cheaper to get thread index from vlib_main_t if available... Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-06-05bond: send gratuitous arp when the active slave went down in active-backup modeSteven1-3/+1
- Modify the API send_ip6_na and send_ip4_garp to take sw_if_index instead of vnet_hw_interface_t and add call to build_ethernet_rewrite to support subinterface/vlan - Add code to bonding driver to send an event to bond_process when the first interface becomes active or when the active interface is down - Create a bond_process to walk the interface and the corresponding subinterfaces to send garp/ip6_na when an event is received. - Minor cleanup in bonding/node.c Note: dpdk bonding driver does not send garp/ip6_na for subinterfaces. There is no attempt to fix it here. But the infra is now done and should be easy to add the support. Change-Id: If3ecc4cd0fb3051330f7fa11ca0dab3e18557ce1 Signed-off-by: Steven <sluong@cisco.com>
2018-05-30bonding: fix packet trace in bond-inputDamjan Marion1-5/+1
Change-Id: I00fc4a4553dabed7ef099227b8253ed4916ea5e4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-29Add VLIB_NODE_FN() macro to simplify multiversioning of node functionsDamjan Marion1-21/+5
Change-Id: Ibab5e27277f618ceb2d543b9d6a1a5f191e7d1db Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-27bond-input performance optimizationDamjan Marion1-291/+261
Old code ~25 clocks/packet, new ~10. Change-Id: I202cd6cbafb1ab2296939634d674f7ffd28253fc Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-25bond: performance harvestingSteven1-13/+15
- hash is great. But it is a bit too slow for the DP. Use direct array indexing to quickly retrieve the slave interface. - the algorithm used by flow hash is great. But it is a bit too slow for the DP. Use l2_hash_hash() extracted from lb_hash.h which ECMP is using. It makes use of intrinsic crc32 instruction set. - shortcut modulo arithmetic when the operand is 2**x (where x up to 4) to avoid division instruction. - special case for link count == 1 in bond_tx_fn() - use clib_mem_unaligned to access data for the packet to avoid alignment error - Fix some typos for packet tracing. Change-Id: I8eae3ad497061c5473aa675ba894ee0211120d25 Signed-off-by: Steven <sluong@cisco.com>
2018-04-24lacp: deleting the bond subinterface may cause lacp to lose the partner ↵Steven1-2/+1
[VPP-1251] Problem: When the bond subinterface is removed, it was observed that we lost the lacp partner. Show hardware shows rx counter goes up, but show interface does not for the slave interfaces. Cause: We reset the interface promiscuous mode when the bond subinterface is deleted. This causes dpdk not to accept any packet. Leave the interface in promiscuous mode fixes the problem. Other fixes: There are few places we use hw_if_index as if they are sw_if_index. But they don't necessarily have the same value. As soon as a subinterface is created, they start to diverge. The fix is to use the correct API for the hw_if_index and sw_if_index. Change-Id: I1e6b8bca0a4aae396d217a141271cbf968500c91 Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit 42c6599bf3057a7e8f4f00f5b6a9dd72af48d283)
2018-03-30bond: show trace causes a crash if the interface is deletedSteven1-6/+16
For the debug image, if the interface is removed and the trace was collected prior to the interface delete, show trace may cause a crash. This is because vnet_get_sw_interface_name and vnet_get_sup_hw_interface are not safe if the interface is deleted. The fix is to use format_vnet_sw_if_index_name if all we need is to get the interface name in the trace to display. It would show "DELETED" which is better than a crash. Change-Id: I912402d3e71592ece9f49d36c8a6b7af97f3b69e Signed-off-by: Steven <sluong@cisco.com>
2018-03-21bond: Add bonding driver and LACP protocolSteven1-0/+509
Add bonding driver to support creation of bond interface which composes of multiple slave interfaces. The slave interfaces could be physical interfaces, or just any virtual interfaces. For example, memif interfaces. The syntax to create a bond interface is create bond mode <lacp | xor | acitve-backup | broadcast | round-robin> To enslave an interface to the bond interface, enslave interface TenGigabitEthernet6/0/0 to BondEthernet0 Please see src/plugins/lacp/lacp_doc.md for more examples and additional options. LACP is a control plane protocol which manages and monitors the status of the slave interfaces. The protocol is part of 802.3ad standard. This patch implements LACPv1. LACPv2 is not supported. To enable LACP on the bond interface, specify "mode lacp" when the bond interface is created. The syntax to enslave a slave interface is the same as other bonding modes. Change-Id: I06581d3b87635972f9f0e1ec50b67560fc13e26c Signed-off-by: Steven <sluong@cisco.com>