aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/bonding
AgeCommit message (Collapse)AuthorFilesLines
2019-10-16bonding: graph node running after bond-input in feature arc may crashSteven Luong1-3/+35
In bond RX quad loop, when all packets within the frame have the same incoming interface, we cannot skip calling bond_update_next because that function calls vnet_feature_next() to update the b->current_config_index. The next node needs the correct b->current_config_index to work with. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I3d8b3d4e0f95490f406fae7638f0c43c301ce664
2019-10-11bonding: feature arc may not be enabled for the slave interfaceSteven Luong1-2/+2
vnet_feature_enable_disable takes sw_if_index, not hw_if_index. If there is a subinterface created prior to the slave interface is created, sw_if_index and hw_if_index start to diverge and the problem will happen. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I11e1f099378832f83b748526c6cbeb56960fad3c
2019-10-06bonding: traffic traversing the wrong interfaceSteven Luong1-0/+1
Missing an increment in the while loop. Hashes not stored in the array. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I603027f5a7305478f48a102ac8035ffde9102c53 (cherry picked from commit 0471cdbd3fe04a88a8b70b5f0eff0c378e19abf7)
2019-09-30bonding: fix non-null-terminated C-stringBenoît Ganne1-2/+8
Type: fix Change-Id: Ibb7ba878b049b8b18e890c43fdd6324cb88d63b8 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-09-24vlib: add flag to explicitelly mark nodes which can init per-node packet traceDamjan Marion1-0/+1
Type: feature Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-09-11bonding: API cleanupJakub Grajciar2-31/+54
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Idbba4ab6a412b75338e3149e51476693f0862f16 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-09-06bonding: add weight support for active-backup modeSteven Luong4-82/+258
Not all interfaces have the same characteristics within the bonding group. For active-backup mode, we should do our best to select the slave that performs the best as the primary slave. We already did that by preferring the slave that is local numa. Sometimes, this is not enough. For example, when all are local numas, the selection is arbitrary. Some slave interfaces may have higher speed or better qos than the others. But this is hard to infer. One rule does not fit all. So we let the operator to optionally specify the weight for each slave interface. Our primary slave selection rule is now 1. biggest weight 2. is local numa 3. current primary slave (to avoid churn) 4. lowest sw_if_index (for deterministic behavior) This selection rule only applies to active-backup mode which only one slave is used for forwarding traffic until it becomes unreachable. At that time, the next "best" slave candidate is automatically promoted. The slaves are sorted according to the preference rule when they are up. So there is no need to find the next best candidate when the primary slave goes down. Another good thing about this rule is when the down slave comes back up, it is selected as the primary slave again unless there is indeed a "better" slave than this down slave that were added during that period. To set the weight for the slave interface, do this after the interface is enslaved set interface bond <interface-name> weight <value> Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I59ced6d20ce1dec532e667dbe1afd1b4243e04f9
2019-09-04stats: add /if/<n>/<n>/state for lacp interface stateSteven Luong2-2/+31
Add /if/lacp/<bond-sw_if_index>/<slave-sw_if_index>/state <bond-sw_if_index> is a vector of the bond sw_if_index <slave-sw_if_index> is a vector of the slave sw_if_index Content is the integer value of the lacp actor state. The state is actually a bitfield as described in the lacp protocol spec. Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ic6eca8ce2a1acd2d858e4e50b7eac1d000ea08e5 Signed-off-by: Ole Troan <ot@cisco.com>
2019-08-17bonding lacp: deleting virtual interface which was enslaved may cause crashSteven Luong3-26/+39
Virtual interfaces may be part of the bonding like physical interfaces. The difference is virtual interfaces may disappear dynamically. As an example, the following CLI sequence may crash the debug image create vhost-user socket /tmp/sock1 create bond mode lacp bond add BondEthernet0 VirtualEthernet0/0/0 delete vhost-user VirtualEhernet0/0/0 Notice the virtual interface is deleted without first doing bond delete. The proper order is to first remove the slave interface from the bond prior to deleting the virtual interface as shown below. But we should handle it anyway. create vhost-user socket /tmp/sock1 create bond mode lacp bond add BondEthernet0 VirtualEthernet0/0/0 bond del VirtualEthernet0/0/0 <----- delete vhost-user VirtualEhernet0/0/0 The fix is to register for VNET_SW_INTERFACE_ADD_DEL_FUNCTION and remove the slave interface from the bond if the to-be-deleted interface is part of the bond. We check the interface that it is actually up before we send the lacp pdu. Up means both hw and sw admin up. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: If4d2da074338b16aab0df54e00d719e55c45221a
2019-07-25bonding: incorrect RX counters for bond interfaceSteven Luong2-44/+36
show interface does not display the RX counters for the bond interfaces. It displays rx-no-buf instead. The problem is VNET_INTERFACE_COUNTER_RX is a combined counter, not a simple counter. Change the code to use vlib_increment_combined_counter passing it with n_rx_packets and n_rx_bytes. Type: fix Change-Id: I8121ad7e546447049fa13da62481b6c8f5575bec Signed-off-by: Steven Luong <sluong@cisco.com>
2019-07-24bonding: print the name on the cli when createdMohsin Kazmi1-0/+6
Type: feature Change-Id: Icd718c98ba2fa900cafaf1a59dfb100ee9914ec9 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-07-22bonding: fix create bond CLIZhiyong Yang1-1/+1
1. "numa-only" is optional and is disabled by default for lacp mode. 2. update lacp doc. Type: fix Change-Id: I6a3a8423ef31ad9980353a796957693cd6205d73 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-07-19bonding: add support for numa-only in lacp modeZhiyong Yang5-3/+56
If numa-only is set, Only slaves on local numa node transmit pkts if have at least one, otherwise the bond interface works as usual. CLI change: create bond mode lacp [load-balance { l2 | l23 | l34 } {numa-only}] [hw-addr <mac-address>] [id <if-id>] The new member "u8 numa_only;" is also added to bond_create_if_args_t. Type: feature Change-Id: Icdccedafb0738d8c9d4a5acce909ce562428c071 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-06-26bonding: fix comment typoZhiyong Yang1-1/+1
Type: style Change-Id: I28908756019f8ca54c50334c470d8eded5621ade Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-31bonding: add support for numa awarenessZhiyong Yang2-12/+85
This patch enables bonding numa awareness on multi-socket server working in active-backeup mode. The VPP adds capability for automatically preferring slave with local numa node in order to reduces the load on the QPI-bus and improve system overall performance in multi-socket use cases. Users doesn't need to add any extra operation as usual. Change-Id: Iec267375fc399a9a0c0a7dca649fadb994d36671 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-20bonding: clean up redundant codeZhiyong Yang1-55/+44
1. remove unnecessary cast for void * pointer. 2. remove the unused input parameter. Change-Id: Ic0324364fc0c772200d30fb18a0ba959ed4f7ea4 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-04-17Revert "Revert "bond: problem switching from l2 to l3""Steven Luong1-0/+11
This reverts commit 5d0d5494db58422eb528c0f8b39a86ea966505e9. The csit crash was actually due to the test image missing the patch https://gerrit.fd.io/r/#/c/17731/ It was a mistake to revert the original patch https://gerrit.fd.io/r/#/c/15577/ Change-Id: I7fc563981aa13d308d55b25194fee21475ebc57d Signed-off-by: Steven Luong <sluong@cisco.com>
2019-04-10API: Fix shared memory only action handlers.Ole Troan1-68/+12
Some API action handlers called vl_msg_ai_send_shmem() directly. That breaks Unix domain socket API transport. A couple (bond / vhost) also tried to send a sw_interface_event directly, but did not send the message to all that had registred interest. That scheme never worked correctly. Refactored and improved the interface event code. Change-Id: Idb90edfd8703c6ae593b36b4eeb4d3ed7da5c808 Signed-off-by: Ole Troan <ot@cisco.com>
2019-04-03lacp: passive mode support [VPP-1551]Steven Luong1-1/+28
By definition, passive mode means the node does not start sending lacp pdu until it first hears from the partner or remote. - Rename ptx machine's BEGIN state to NO_PERIODIC state. - Put periodic machine in NO_PERIDOIC state when the interface is enabled for lacp. ptx machine will transition out of NO_PERIODIC state when the local node hears from the remote or when the local node is configured for active mode. - Also add send and receive statistics for debugging. Change-Id: I747953b9595ed31328b2f4f3e7a8d15d01e04d7f Signed-off-by: Steven Luong <sluong@cisco.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-2/+2
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-15Revert "API: Cleanup APIs interface.api"Ole Trøan1-1/+2
This reverts commit e63325e3ca03c847963863446345e6c80a2c0cfd. Allow time for CSIT to accommodate. Change-Id: I59435e4ab5e05e36a2796c3bf44889b5d4823cc2 Signed-off-by: ot@cisco.com
2019-03-15API: Cleanup APIs interface.apiJakub Grajciar1-2/+1
Use of consistent API types for interface.api Change-Id: Ieb54cebb4ac96b432a3f0b41596718aa2f34885b Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-02-21Revert "bond: problem switching from l2 to l3"Peter Mikus1-11/+0
During CSIT testing we discovered that LACP tests were failing and producing coredumps. Reverting this patch fix the problem with VPP crashing. This reverts commit f23890138e02d4218c828c427f687f8ecdb0e165. Change-Id: Icf97053ce1473350add885cbebe591f7f3efcbea Signed-off-by: Peter Mikus <pmikus@cisco.com>
2019-02-14Add -fno-common compile optionBenoît Ganne2-1/+3
-fno-common makes sure we do not have multiple declarations of the same global symbol across compilation units. It helps debug nasty linkage bugs by guaranteeing that all reference to a global symbol use the same underlying object. It also helps avoiding benign mistakes such as declaring enum as global objects instead of types in headers (hence the minor fixes scattered across the source). Change-Id: I55c16406dc54ff8a6860238b90ca990fa6b179f1 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-01-23bond: packet drops on VPP bond interface [VPP-1544]Steven2-20/+21
We register callback for VNET_HW_INTERFACE_LINK_UP_DOWN_FUNCTION and VNET_SW_INTERFACE_ADMIN_UP_DOWN_FUNCTION to add and remove the slave interface from the bond interface accordingly. For static bonding without lacp, one would think that it is good enough to put the slave interface into the ective slave set as soon as it is configured. Wrong, sometimes the slave interface is configured to be part of the bonding without ever bringing up the hardware carrier or setting the admin state to up. In that case, we send traffic to the "dead" slave interface. The fix is to make sure both the carrier and admin state are up before we put the slave into the active set for forwarding traffic. Change-Id: I93b1c36d5481ca76cc8b87e8ca1b375ca3bd453b Signed-off-by: Steven <sluong@cisco.com>
2019-01-13bonding: support custom interface IDsAlexander Chernavin5-3/+40
Change-Id: I78fe58144fa3ba2e1c7135897a13a2541f235c91 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2018-11-18add vlib_prefetch_buffer_data(...) macroDamjan Marion1-8/+4
Change-Id: Iba750a41262cc028ad0363fff78cc219e4a33538 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach2-4/+4
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-13vlib rename vlib_frame_args(...) to vlib_frame_scalar_args(..)Damjan Marion1-2/+2
Typically we have scalar_size == 0, so it doesn't matter but vlib_frame_args was providing pointer to scalar frame data, not vector data. To avoid future confusion function is renamed to vlib_frame_scalar_args(...) Change-Id: I48b75523b46d487feea24f3f3cb10c528dde516f Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-29bond: problem switching from l2 to l3Steven1-0/+11
when the last interface is removed from l2 in the bonding group, we should invoke ethernet_set_rx_direct to allow ip packets to go directly to ip4-input. Change-Id: I43b3cd64e2c119762edd0c295bb9348732adab45 Signed-off-by: Steven <sluong@cisco.com>
2018-10-23c11 safe string handling supportDave Barach2-11/+11
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-17bond: tx optimizationsDamjan Marion3-307/+330
Break up bond tx function into multiple small workloads: 1. parse the packet header and hash it based on the configured algorithm 2. optionally, trace the packet 3. convert the hash value from (1) to the slave port 4. update the buffers with the slave sw_if_index 5. Add the buffers to the queues 6. Create and send the frames old numbers ----------- Time 5.3, average vectors/node 223.74, last 128 main loops 40.00 per node 222.61 vector rates in 3.3627e6, out 6.6574e6, drop 3.3964e4, punt 0.0000e0 Name State Calls Vectors Suspends Clocks Vectors/Call BondEthernet0-output active 68998 17662979 0 1.89e1 255.99 BondEthernet0-tx active 68998 17662979 0 2.60e1 255.99 TenGigabitEthernet3/0/1-output active 68998 8797416 0 1.03e1 127.50 TenGigabitEthernet3/0/1-tx active 68998 8797416 0 7.85e1 127.50 TenGigabitEthernet7/0/1-output active 68996 8865563 0 1.02e1 128.49 TenGigabitEthernet7/0/1-tx active 68996 8865563 0 7.65e1 128.49 new numbers ----------- BondEthernet0-output active 304064 77840384 0 2.29e1 256.00 BondEthernet0-tx active 304064 77840384 0 2.47e1 256.00 TenGigabitEthernet3/0/1-output active 304064 38765525 0 1.03e1 127.49 TenGigabitEthernet3/0/1-tx active 304064 38765525 0 7.66e1 127.49 TenGigabitEthernet7/0/1-output active 304064 39074859 0 1.01e1 128.51 Change-Id: I3ef9a52bfe235559dae09d055c03c5612c08a0f7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-06bond: active-backup mode is using the wrong load balance algoSteven1-2/+4
active-backup mode is using l2 load balance algo. It should be using active-backup. Also notice that the output is missing a character. vpp# create bond mode active-backup create bond mode active-backup vpp# sh bond sh bond interface name sw_if_index mode load balance active slaves slaves BondEthernet0 6 xor l34 2 2 BondEthernet1 9 xor l34 1 1 BondEthernet2 10 active-backu l2 0 0 vpp# Change-Id: If5ed0cc6c25f6c2ddabec15ff6188b34923d38e3 Signed-off-by: Steven <sluong@cisco.com>
2018-10-05bond: tx perf improvement, part troisDamjan Marion2-67/+166
Introduce bond_tx_inline which takes lb as a constant for gcc to do the optimization The number appears a tad better for 256 bytes frame. with the patch -------------- Thread 2 vpp_wk_1 (lcore 3) Time 4.3, average vectors/node 224.00, last 128 main loops 40.00 per node 222.61 vector rates in 8.4836e6, out 1.6967e7, drop 0.0000e0, punt 0.0000e0 Name State Calls Vectors Suspends Clocks Vectors/Call BondEthernet0-output active 141054 36109824 0 2.51e1 256.00 BondEthernet0-tx active 141054 36109824 0 2.55e1 256.00 TenGigabitEthernet6/0/0-output active 141054 18055469 0 9.43e0 128.00 TenGigabitEthernet6/0/0-tx active 141054 18055469 0 6.97e1 128.00 TenGigabitEthernet6/0/1-output active 141054 18054355 0 9.54e0 127.99 TenGigabitEthernet6/0/1-tx active 141054 18054355 0 7.05e1 127.99 bond-input active 141054 36109824 0 1.76e1 256.00 dpdk-input polling 70527 36109824 0 5.03e1 512.00 ethernet-input active 141054 36109824 0 6.12e1 256.00 ip4-input active 141054 36109824 0 3.26e1 256.00 ip4-lookup active 141054 36109824 0 2.94e1 256.00 ip4-rewrite active 141054 36109824 0 3.27e1 256.00 without the patch ----------------- Thread 2 vpp_wk_1 (lcore 3) Time 4.3, average vectors/node 224.00, last 128 main loops 40.00 per node 222.61 vector rates in 8.4443e6, out 1.6889e7, drop 0.0000e0, punt 0.0000e0 Name State Calls Vectors Suspends Clocks Vectors/Call BondEthernet0-output active 142744 36542464 0 2.51e1 256.00 BondEthernet0-tx active 142744 36542464 0 2.67e1 256.00 TenGigabitEthernet6/0/0-output active 142744 18270813 0 9.19e0 127.99 TenGigabitEthernet6/0/0-tx active 142744 18270813 0 6.98e1 127.99 TenGigabitEthernet6/0/1-output active 142744 18271651 0 9.43e0 128.00 TenGigabitEthernet6/0/1-tx active 142744 18271651 0 7.02e1 128.00 bond-input active 142744 36542464 0 1.76e1 256.00 dpdk-input polling 71372 36542464 0 5.08e1 512.00 ethernet-input active 142744 36542464 0 6.15e1 256.00 ip4-input active 142744 36542464 0 3.23e1 256.00 ip4-lookup active 142744 36542464 0 2.96e1 256.00 ip4-rewrite active 142744 36542464 0 3.28e1 256.00 Change-Id: I9fd43eda3c735cbff680ac6d2f01ecdae81f0eda Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-28bond: tx performance enhancement part deuxSteven3-124/+106
- Reduce per packet cost by buffering the output packet buffer indexes in the queue and process the queue outside the packet processing loop. - Move unnecessary variable initialization outside of the while loop. - There is no need to save the old interface if tracing is not enabled. Test result for 256 bytes packet comparison. Other packet size shows similar improvement. With the patch -------------- BondEthernet0-output active 52836 13526016 0 1.71e1 256.00 BondEthernet0-tx active 52836 13526016 0 2.68e1 256.00 TenGigabitEthernet6/0/0-output active 52836 6762896 0 9.17e0 127.99 TenGigabitEthernet6/0/0-tx active 52836 6762896 0 6.97e1 127.99 TenGigabitEthernet6/0/1-output active 52836 6763120 0 9.40e0 128.00 TenGigabitEthernet6/0/1-tx active 52836 6763120 0 7.00e1 128.00 bond-input active 52836 13526016 0 1.76e1 256.00 Without the patch ----------------- BondEthernet0-output active 60858 15579648 0 1.73e1 256.00 BondEthernet0-tx active 60858 15579648 0 2.94e1 256.00 TenGigabitEthernet6/0/0-output active 60858 7789626 0 9.29e0 127.99 TenGigabitEthernet6/0/0-tx active 60858 7789626 0 7.01e1 127.99 TenGigabitEthernet6/0/1-output active 60858 7790022 0 9.31e0 128.00 TenGigabitEthernet6/0/1-tx active 60858 7790022 0 7.10e1 128.00 bond-input active 60858 15579648 0 1.77e1 256.00 Change-Id: Ib6d73a63ceeaa2f1397ceaf4c5391c57fd865b04 Signed-off-by: Steven <sluong@cisco.com>
2018-09-26bond: tx perf improvementsDamjan Marion3-219/+172
Change-Id: I0c3f2add35ad9fc11308b7a2a2c69ffd8472dd2e Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-25bond: crash when deleting bond interface [VPP-1427]Steven1-2/+5
After the slave interface is removed from bond, bond input node still receives traffic for the slave interface. We have to disable feature arc for the corresponding slave interface. Change-Id: I44e7001e6685e290b032c48147d02911a55d547b Signed-off-by: Steven <sluong@cisco.com>
2018-08-13Multiarch handling in different constructor macrosDamjan Marion1-5/+0
This significantly reduces need for ... in multiarch code. Simply constructor macros will jost create static unused entry if CLIB_MARCH_VARIANT is defined and that will be optimized out by compiler. Change-Id: I17d1c4ac0c903adcfadaa4a07de1b854c7ab14ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-19Remove unused argument to vlib_feature_nextDamjan Marion1-1/+1
Change-Id: Ieb8b53977fc8484c19780941e232ee072b667de3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-11avoid using thread local storage for thread indexDamjan Marion2-4/+4
It is cheaper to get thread index from vlib_main_t if available... Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-06-05bond: send gratuitous arp when the active slave went down in active-backup modeSteven4-3/+74
- Modify the API send_ip6_na and send_ip4_garp to take sw_if_index instead of vnet_hw_interface_t and add call to build_ethernet_rewrite to support subinterface/vlan - Add code to bonding driver to send an event to bond_process when the first interface becomes active or when the active interface is down - Create a bond_process to walk the interface and the corresponding subinterfaces to send garp/ip6_na when an event is received. - Minor cleanup in bonding/node.c Note: dpdk bonding driver does not send garp/ip6_na for subinterfaces. There is no attempt to fix it here. But the infra is now done and should be easy to add the support. Change-Id: If3ecc4cd0fb3051330f7fa11ca0dab3e18557ce1 Signed-off-by: Steven <sluong@cisco.com>
2018-05-30bonding: fix packet trace in bond-inputDamjan Marion1-5/+1
Change-Id: I00fc4a4553dabed7ef099227b8253ed4916ea5e4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-29Add VLIB_NODE_FN() macro to simplify multiversioning of node functionsDamjan Marion1-21/+5
Change-Id: Ibab5e27277f618ceb2d543b9d6a1a5f191e7d1db Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-27bond-input performance optimizationDamjan Marion1-291/+261
Old code ~25 clocks/packet, new ~10. Change-Id: I202cd6cbafb1ab2296939634d674f7ffd28253fc Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-25bond: performance harvestingSteven4-133/+183
- hash is great. But it is a bit too slow for the DP. Use direct array indexing to quickly retrieve the slave interface. - the algorithm used by flow hash is great. But it is a bit too slow for the DP. Use l2_hash_hash() extracted from lb_hash.h which ECMP is using. It makes use of intrinsic crc32 instruction set. - shortcut modulo arithmetic when the operand is 2**x (where x up to 4) to avoid division instruction. - special case for link count == 1 in bond_tx_fn() - use clib_mem_unaligned to access data for the packet to avoid alignment error - Fix some typos for packet tracing. Change-Id: I8eae3ad497061c5473aa675ba894ee0211120d25 Signed-off-by: Steven <sluong@cisco.com>
2018-04-24lacp: deleting the bond subinterface may cause lacp to lose the partner ↵Steven3-23/+2
[VPP-1251] Problem: When the bond subinterface is removed, it was observed that we lost the lacp partner. Show hardware shows rx counter goes up, but show interface does not for the slave interfaces. Cause: We reset the interface promiscuous mode when the bond subinterface is deleted. This causes dpdk not to accept any packet. Leave the interface in promiscuous mode fixes the problem. Other fixes: There are few places we use hw_if_index as if they are sw_if_index. But they don't necessarily have the same value. As soon as a subinterface is created, they start to diverge. The fix is to use the correct API for the hw_if_index and sw_if_index. Change-Id: I1e6b8bca0a4aae396d217a141271cbf968500c91 Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit 42c6599bf3057a7e8f4f00f5b6a9dd72af48d283)
2018-04-13bond: ping fails between l2 BD [VPP-1238]Steven2-15/+76
In dpdk based bonding, when the bond interface is configured for l2, it automatically sets the bond interface to promiscuous mode and sets rx redirect to ethernet-input. This allows traffic to be bridged to non compute node facing interface when it is received from the compute node interface. For native vpp bonding, we need to do similar things. When the bond interface is configured for l2, we set the slave interfaces to promiscuous mode and set rx redirect to ethernet-input because dpdk does not know anything about the bond interface. Likewise, when a new interface is enslaved, we also need to do the same thing if the bond interface has already been configured for l2. Change-Id: I7e168008e8a4221be74929b2a20e6db0ce8f3110 Signed-off-by: Steven <sluong@cisco.com>
2018-04-12bond: 1 packet/frame == bad performance [VPP-1236]Steven1-6/+8
While https://gerrit.fd.io/r/#/c/11316/ took care of 1 packet/frame for most of the bonding modes, it missed the broadcast mode. This patch is to fix the 1 packet/frame for the broadcast mode. Change-Id: Iac48a2977c7f702f341479cc712a6448090dbc60 Signed-off-by: Steven <sluong@cisco.com>
2018-03-30bond: show trace causes a crash if the interface is deletedSteven2-9/+30
For the debug image, if the interface is removed and the trace was collected prior to the interface delete, show trace may cause a crash. This is because vnet_get_sw_interface_name and vnet_get_sup_hw_interface are not safe if the interface is deleted. The fix is to use format_vnet_sw_if_index_name if all we need is to get the interface name in the trace to display. It would show "DELETED" which is better than a crash. Change-Id: I912402d3e71592ece9f49d36c8a6b7af97f3b69e Signed-off-by: Steven <sluong@cisco.com>
2018-03-28bond: cli renameSteven1-11/+10
rename "enslave interface <slave> to <BondEthernetx>" to "bond add <BondEthernetx> <slave> "detach interface <slave>" to "bond del <slave>" Change-Id: I1bf8f017517b1f8a823127c7efedd3766e45cd5b Signed-off-by: Steven <sluong@cisco.com>