aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/buffer.h
AgeCommit message (Collapse)AuthorFilesLines
2019-02-19tap gso: experimental supportAndrew Yourtchenko1-9/+26
This commit adds a "gso" parameter to existing "create tap..." CLI, and a "no-gso" parameter for the compatibility with the future, when/if defaults change. It makes use of the lowest bit of the "tap_flags" field in the API call in order to allow creation of GSO interfaces via API as well. It does the necessary syscalls to enable the GSO and checksum offload support on the kernel side and sets two flags on the interface: virtio-specific virtio_if_t.gso_enabled, and vnet_hw_interface_t.flags & VNET_HW_INTERFACE_FLAG_SUPPORTS_GSO. The first one, if enabled, triggers the marking of the GSO-encapsulated packets on ingress with VNET_BUFFER_F_GSO flag, and setting vnet_buffer2(b)->gso_size to the desired L4 payload size. VNET_HW_INTERFACE_FLAG_SUPPORTS_GSO determines the egress packet processing in interface-output for such packets: When the flag is set, they are sent out almost as usual (just taking care to set the vnet header for virtio). When the flag is not enabled (the case for most interfaces), the egress path performs the re-segmentation such that the L4 payload of the transmitted packets equals gso_size. The operations in the datapath are enabled only when there is at least one GSO-compatible interface in the system - this is done by tracking the count in interface_main.gso_interface_count. This way the impact of conditional checks for the setups that do not use GSO is minimized. "show tap" CLI shows the state of the GSO flag on the interface, and the total count of GSO-enabled interfaces (which is used to enable the GSO-related processing in the packet path). This commit lacks IPv6 extension header traversal support of any kind - the L4 payload is assumed to follow the IPv6 header. Also it performs the offloads only for TCP (TSO - TCP segmentation offload). The UDP fragmentation offload (UFO) is not part of it. For debug purposes it also adds the debug CLI: "set tap gso {<interface> | sw_if_index <sw_idx>} <enable|disable>" Change-Id: Ifd562db89adcc2208094b3d1032cee8c307aaef9 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-01-22GBP: Sclass to src-epg conversionsNeale Ranns1-1/+5
Change-Id: Ica88268fd6a6ee01da7e9219bb4e81f22ed2fd4b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-02Revert "add ipsecmb plugin"Florin Coras1-4/+0
This reverts commit be16020c5034bc69df25a8ecd7081aec9898d93c. The arm verify job actually failed but the result was overwritten by an x86 ubuntu retry. Change-Id: Idcae7691fc575053563b8ff8bcad661c15891668 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-01-02add ipsecmb pluginKlement Sekera1-0/+4
Change-Id: I99c0737dfeeec2db267773625ddc9b55324fd237 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-12-04Add VNET_BUFFER_F_AVAIL definitionsDave Barach1-1/+25
Add a check to make sure that the vlib and vnet buffer flag bit definitions do not overlap. The VNET_BUFFER_F_AVAIL1...8 definitions allow out-of-tree codes to: #define VNET_BUFFER_F_MY_USECASE VNET_BUFFER_F_AVAIL1 and so on. This avoids introducing irrelevant and/or proprietary bit definitions into vnet/buffer.h, and hopefully minimizes merge pain for everyone involved. Change-Id: I5be4f61dceb81b5bfca005f6d609ade074af205b Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-30Metadata / opaque formatting belongs in vppDave Barach1-22/+22
VPP graph dispatch trace record description: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Major Version | Minor Version | NStrings | ProtoHint | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Buffer index (big endian) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + VPP graph node name ... ... | NULL octet | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Buffer Metadata ... ... | NULL octet | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Buffer Opaque ... ... | NULL octet | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Buffer Opaque 2 ... ... | NULL octet | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | VPP ASCII packet trace (if NStrings > 4) | NULL octet | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Packet data (up to 16K) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Graph dispatch records comprise a version stamp, an indication of how many NULL-terminated strings will follow the record header, and a protocol hint. The buffer index allows downstream consumers of these data to easily filter/track single packets as they traverse the forwarding graph. FWIW, the 32-bit buffer index is stored in big endian format. As of this writing, major version = 1, minor version = 0. Nstrings will be either 4 or 5. Here is the current set of protocol hints: typedef enum { VLIB_NODE_PROTO_HINT_NONE = 0, VLIB_NODE_PROTO_HINT_ETHERNET, VLIB_NODE_PROTO_HINT_IP4, VLIB_NODE_PROTO_HINT_IP6, VLIB_NODE_PROTO_HINT_TCP, VLIB_NODE_PROTO_HINT_UDP, VLIB_NODE_N_PROTO_HINTS, } vlib_node_proto_hint_t; Example: VLIB_NODE_PROTO_HINT_IP6 means that the first octet of packet data SHOULD be 0x60, and should begin an ipv6 packet header. Change-Id: Idf310bad80cc0e4207394c80f18db5f77c378741 Signed-off-by: Dave Barach <dave@barachs.net>
2018-09-27IPIP and IPv6 fragmentationOle Troan1-1/+0
- Error where ICMPv6 error code doesn't reset VLIB_TX = -1 Leading to crash for ICMP generated on tunnelled packets - Missed setting VNET_BUFFER_F_LOCALLY_ORIGINATED, so IP in IPv6 packets never got fragmented. - Add support for fragmentation of buffer chains. - Remove support for inner fragmentation in frag code itself. Change-Id: If9a97301b7e35ca97ffa5c0fada2b9e7e7dbfb27 Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra1-4/+4
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-09-10vxlan-gbp: Add support for vxlan gbpMohsin Kazmi1-1/+3
This patch implements vxlan with extension of group based policy support. Change-Id: I70405bf7332c02867286da8958d9652837edd3c2 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-08-03loop counter to prevent infiinte number of look ups per-packetNeale Ranns1-1/+3
Change-Id: I59235d11baac18785a4c90cdaf14e8f3ddf06dab Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-19Cleanup of handoff codeDamjan Marion1-15/+0
- removed handoff-dispatch node - removed some unused buffer metadata fields - enqueue to thread logic moved to inline function Change-Id: I7361e1d88f8cce74cd4fcec90d172eade1855cbd Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-02Fixing ip4-reassembly ip6-reassembly non feature node, next_node_index settingVijayabhaskar Katamreddy1-1/+0
Change-Id: Ib988d87e6758ffa31862096391f9f286b0797f2b Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-06-25MAP: Move MAP-E/T to a plugin.Ole Troan1-8/+0
Only remaining traces of MAP in the src/vnet is now in buffer.h. Awaiting a new buffer opaque API (hint, hint). Change-Id: Ie165561484731f1d7ed6e0f604b43624e06db3f0 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-08Adding pad for reasm vnet_buffer reasm struct sothat adj_index is retainedVijayabhaskar Katamreddy1-0/+1
Change-Id: Ib756c4f3e8caba1f77ef48b62a2a5d7283fe5016 Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-06-04Remove unused GRE buffer meta-dataNeale Ranns1-6/+0
Change-Id: Ia8ef019742c13b1149916d51796cad6f50687162 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-17Packet generator: preserve pcap file timestampsDave Barach1-0/+5
Set vnet_buffer2(b0)->pg_replay_timestamp, for use when desired. Fix a memory leak in pg_stream_free(...), which wasn't freeing the replay packet templates. Change-Id: I01822a9e91a52de4774d2b95cf0c2ee254a915e9 Signed-off-by: Dave Barach <dave@barachs.net>
2018-04-27A bit of buffer metadata reshuffling to accommodate flow_idDamjan Marion1-1/+2
Change-Id: I2794384557c6272fe217269b14a9db09eda19220 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13GBP V2Neale Ranns1-1/+7
update the GBP plugin to implement the full NAT feature set of opflex agent Change-Id: Ic06a039c889445ed0b9087fa1f292634192b0f8d Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-21reassembly: feature/concurrencyKlement Sekera1-8/+17
This change makes ip reassembly an interface feature, while adding concurrency support. Due to this, punt is no longer needed to test reassembly. Change-Id: I467669514ec33283ce935be0f1dd08f07684f0c7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-16QoS recording and markingNeale Ranns1-5/+21
Change-Id: Ie5a50def4ec1e4a3b3404a8b6ab9ec248bc16744 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-09MPLS Unifom modeNeale Ranns1-0/+2
- support both pipe and uniform modes for all MPLS LSP - all API programming for output-labels requires that the mode (and associated data) is specificed - API changes in MPLS, BIER and IP are involved - new DPO [sub] types for MPLS labels to handle the two modes. Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-02-21SCTP: minor refactorMarco Varlese1-1/+1
This patch adds some missing information in various debugging messages which can help with debugging state-machine and connection-tracking. It also renames some internal variable names for better code readibility. Change-Id: I68503fc0214300032f7514426c8b5b2b12edf11a Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-02-17SCTP: 'multi-home' supportMarco Varlese1-0/+1
This patch addresses the SCTP requirement for multiple sub-connections to implement the so called 'multi-homed' scenario. Change-Id: Ibce18f216e9d2bebe318992c441bf278e16aad17 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-02-07Refactor vlib_buffer flagsDamjan Marion1-26/+7
Change-Id: I853386aebfe488ebb10328435b81b6e3403c5dd0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-01IPv4/6 reassemblyKlement Sekera1-0/+12
Change-Id: Ic5dcadd13c88b8a5e7896dab82404509c081614a Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-01-31Fix VNET_BUFFER_F_SPAN_CLONE flagDamjan Marion1-1/+1
Change-Id: I670e41bcfc61a45555431603c937f8dad4d165e9 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-01-29DRAFT ip4/6_frag to support DPO Style based Next NodeVijayabhaskar Katamreddy1-0/+1
Change-Id: I1df3d23c1c5668b83d52b41f51c0e3f24183af9e Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-01-24SCTP stack (RFC4960)Marco Varlese1-0/+13
== CONTENT == * SCTP chunks definition as per RFC4960; * Helper functions to set/get values to/from the corresponding chunks; * Hooks to the session/application layers; * Complete state-machine handling; * Implementation for unexpected chunk received in a certain state (state-machine error handling) * Support for 1-single connection; * Sample application to test receive/transmit data-path; * Test to validate SCTP stack; Change-Id: I1b55c455ab400be9513f4e094dadfc3181d2ebc9 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-01-09DVR: run L3 output featuresNeale Ranns1-0/+24
- rename l2_bridged to is_dvr. Including on the ip.api this was new in the 18.01 release so no compatability issues. - steal the free space in vnet_buffer_opaque_t for use with flags. - run the ipX-output feature arc from the DVR DPO Change-Id: I040e5976d1dbe076fcdda3a40a7804f56337ce3f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-09BIER in non-MPLS netowrksNeale Ranns1-11/+9
as decsribed in section 2.2 ihttps://tools.ietf.org/html/draft-ietf-bier-mpls-encapsulation-10 with BIFT encoding from: https://tools.ietf.org/html/draft-wijnandsxu-bier-non-mpls-bift-encoding-00 changes: 1 - introduce the new BIFT lookup table. BIER tables that have an associated MPLS label are added to the MPLS-FIB. Those that don't are added to the BIER table 2 - BIER routes that have no associated output MPLS label will add a BIFT label. 3 - The BIER FMask has a path-list as a member to resolve via any possible path. Change-Id: I1fd4d9dbd074f0e855c16e9329b81460ebe1efce Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-21dpdk: add l2_hdr_offset and l3_hdr_offset in vlib_buffer_tDamjan Marion1-15/+19
Change-Id: I0a6d1257e391c3b6f7da6498bd5f7d4c545d17e9 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-09BIERNeale Ranns1-0/+12
- see draft-ietf-bier-mpls-encapsulation-10 - midpoint, head and tail functions - supported payload protocols; IPv4 and IPv6 only. Change-Id: I59d7363bb6fdfdce8e4016a68a9c8f5a5e5791cb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-19VPP-1024: rewrite buffer trajectory tracerDave Barach1-0/+17
Use a proper u16 * vector to capture node indices, since vpp w/ plugins now exceeds 255 graph nodes Change-Id: Ic48cad676fa3a6116413ddf08c083dd9660783f1 Signed-off-by: Dave Barach <dave@barachs.net>
2017-10-10session: add support for application namespacingFlorin Coras1-2/+8
Applications are now provided the option to select the namespace they are to be attached to and the scope of their attachement. Application namespaces are meant to: 1) constrain the scope of communication through the network by association with source interfaces and/or fib tables that provide the source ips to be used and limit the scope of routing 2) provide a namespace local scope to session layer communication, as opposed to the global scope provided by 1). That is, sessions can be established without assistance from transport and network layers. Albeit, zero/local-host ip addresses must still be provided in session establishment messages due to existing application idiosyncrasies. This mode of communication uses shared-memory fifos (cut-through sessions) exclusively. If applications request no namespace, they are assigned to the default one, which at its turn uses the default fib. Applications can request access to both local and global scopes for a namespace. If no scope is specified, session layer defaults to the global one. When a sw_if_index is provided for a namespace, zero-ip (INADDR_ANY) binds are converted to binds to the requested interface. Change-Id: Ia0f660bbf7eec7f89673f75b4821fc7c3d58e3d1 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-09NAT: hairpinning rework (VPP-1003)Matus Fabian1-1/+2
Change-Id: I7c6911cd6ac366fe62675fd0ff8b0246a25ea1db Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-10-03Update L2FIB entry timestamp only if BD aging enabled (VPP-1002)John Lo1-0/+1
Change L2 learning path so it update stale timestamp in MAC entry only if aging is enabled on the BD for the MAC entry. Change-Id: I7babe986ceef3c030d8ef9185076c42b405f7b0f Signed-off-by: John Lo <loj@cisco.com>
2017-07-21SNAT: in2out translation as an output feature hairpinning (VPP-913)Matus Fabian1-0/+6
Change-Id: I3790739683c6090ffb2aefb4758bd4275856c09a Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-07-18TCP/UDP checksum offload APIDave Barach1-1/+6
Change-Id: I2cb6ce4e29813f6602b14e6e61713fb381fbcef8 Signed-off-by: Dave Barach <dave@barachs.net>
2017-07-14vnet_buffer_t flags cleanupDamjan Marion1-25/+24
Change-Id: I123eccea98abafeb31f25d2a162501e2eded60d4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-14Introduce l{2,3,4}_hdr_offset fields in the buffer metadataDamjan Marion1-11/+3
To save space in the first cacheline following is changed: - total_length_not_including_first_buffer moved to the 2nd cacheline. This field is used only when VLIB_BUFFER_TOTAL_LENGTH_VALID and VLIB_BUFFER_NEXT_PRESENT are both set. - free_list_index is now stored in 4bits inside flags, which allows up to 16 free lists. In case we need more we can store index in the 2nd cachelin Change-Id: Ic8521350819391af470d31d3fa1013e67ecb7681 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-22VNET:explicitly pad l2_classifyEyal Bari1-10/+4
Change-Id: I77412aa8c17b45b1533604e7bfe8fe052ed0f80a Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-19L2FWD:fix seq_num overwritten + validate l2fib entries when forwardingEyal Bari1-3/+12
l2_classify memeber table_index was overlaid over l2.l2fib_seq_num which over written when table_index gets initialized in l2_input_classify solved by overlaying both table_index and opaque_index as only one is used seperated l2fib seq num from l2_input configs for better handling of theoretical ABA issue where an entry for a deleted interface is considered valid by the ager because a different interface with same sw_if_index and seq_num was created before the ager got a chance to delete Change-Id: I7b0eeded971627406f1c80834d7e02c0ebe62136 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-05-08L2FIB:CLI/API to flush all non-static entriesEyal Bari1-2/+1
added CLI l2fib flush-mac all added API l2fib_flush_all flushes all non static l2fib entries on all valid BDs Change-Id: Ic963c88f4bed56308c03ab43106033132a0e87be Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-04-25Session/tcp coverity fixesFlorin Coras1-1/+5
Change-Id: Ic5467df16e870b49c49678b1dbb40f4a2390b3c9 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-04-07MPLS McastNeale Ranns1-0/+3
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-28Implement MAC Flush for BD or Interface from the L2FIBJohn Lo1-3/+5
Allow non-static MACs in the L2FIB which is associated with an interface or a bridge domain (BD) be flushed. MAC flush are initiated automatically when an interface is removed from a BD or when a BD is deleted. MAC flush can also be invoked manually via the following CLI: l2fib mac-flush interface <if-name> l2fib mac-flush bridge-domain <bd-id> Change-Id: Ie33243622834810a765f48ebcd22bdb8e8fc87a4 Signed-off-by: John Lo <loj@cisco.com>
2017-03-06Remove unused multicast fields from vnet_buffer_tNeale Ranns1-10/+0
Change-Id: I8db55443c0beb33a89520ab3167f703f8646ec9e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-01VPP-598: tcp stack initial commitDave Barach1-0/+10
Change-Id: I49e5ce0aae6e4ff634024387ceaf7dbc432a0351 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-27vlib: add VLIB_BUFFER_EXT_HDR_VALID flagDamjan Marion1-3/+0
Change-Id: If56c66dd12eded1cc997087de5fd1b975766c4e2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-11Remove vcgn pluginDamjan Marion1-66/+0
Change-Id: I79f18ec386dedd91a8dcea2ca5726208b7b3c67c Signed-off-by: Damjan Marion <damarion@cisco.com>