summaryrefslogtreecommitdiffstats
path: root/src/vnet/buffer.h
AgeCommit message (Collapse)AuthorFilesLines
2021-02-15vlib: refactor checksum offload supportMohsin Kazmi1-37/+71
Type: refactor This patch refactors the offload flags in vlib_buffer_t. There are two main reasons behind this refactoring. First, offload flags are insufficient to represent outer and inner headers offloads. Second, room for these flags in first cacheline of vlib_buffer_t is also limited. This patch introduces a generic offload flag in first cacheline. And detailed offload flags in 2nd cacheline of the structure for performance optimization. Change-Id: Icc363a142fb9208ec7113ab5bbfc8230181f6004 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-02-12ipsec: Store thread-index in buffer meta-data during SA handoffNeale Ranns1-0/+3
Type: improvement negates the need to load the SA in the handoff node. don't prefetch the packet data, it's not needed. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I340472dc437f050cc1c3c11dfeb47ab09c609624
2021-02-10nat: fix EI hairpinning thread safetyKlement Sekera1-0/+1
Avoid doing inter-thread reads without locks by doing a handoff before destination address rewrite. Destination address is read from a session which is possibly owned by a different thread. By splitting the work in two parts with a handoff in the middle, we can do both in a thread safe way. Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I1c50d188393a610f5564fa230c75771a8065f273
2021-01-18nat: deal with flows instead of sessionsKlement Sekera1-3/+5
This change introduces flow concept to endpoint-dependent NAT. Instead of having a session and a plethora of special cases in code for e.g. hairpinning, twice-nat and others, figure all this out and store it in flow logic. Every flow has a match and a rewrite part. This unifies all the NAT packet processing cases into one - match a flow and rewrite the packet based on that flow. It also provides a cure for hairpinning dilemma where one part of the flow is on one worker and another on a different one. These cases are also sped up by not requiring destination adress lookup every single time to be able to rewrite source nat as this is now part of flow rewrite logic. Type: improvement Change-Id: Ib60c992e16792ea4d4129bc10202ebb99a73b5be Signed-off-by: Klement Sekera <ksekera@cisco.com>
2020-12-03nat: fix forwarding handoff workaroundFilip Varga1-3/+2
A special case when out2in packet needs to be handoffed to other worker thread. We are not able to determine which thread they belong to in the first processing of nat handoff node. These packets needs to go through out2in slowpath before we are able to tell where to handoff them. Type: fix Ticket: VPP-1941 Change-Id: I7173bda970ce6a91d81f48fc72aa2457586a076f Signed-off-by: Filip Varga <fivarga@cisco.com>
2020-05-14nat: ED: store both thread&session idx in hashKlement Sekera1-1/+1
By storing thread and session index in hash table we are able to skip multiple hash lookups in multi-worker scenario, which were used for handoff before. Also, by storing sesion index in vnet_buffer2, we can avoid repeating the lookup after handoff. Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I406fb12f4e2dd8f4a5ca5d83d59dbc37e1af9abf
2020-04-24nat: make usage of vnet_buffer2 transparentKlement Sekera1-0/+6
Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I50df248afb3f6b46c49e6695b3f124cfd584f016
2020-01-15ip: align reass.save_rewrite_lengthv20.05-rc0Klement Sekera1-4/+13
By aligning vnet_buffer_opaque.ip.save_rewrite_length and vnet_buffer_opaque.ip.reass.save_rewrite_length we prevent shallow virtual reassembly code from overwrite save_rewrite_length, allowing other features down the pipe to rely on this value. A static assert is added to guard this alignment. Type: fix Fixes: f126e746fc01c75bc99329d10ce9127b26b23814 Change-Id: Ie7c7f3abc2a221bbcf2830c0f006a4368088b342 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2020-01-03nat: use SVRKlement Sekera1-19/+26
Remove NAT's implementation of shallow virtual reassembly with corresponding CLIs, APIs & tests. Replace with standalone shallow virtual reassembly provided by ipX-sv-reass* nodes. Type: refactor Change-Id: I7e6c7487a5a500d591f6871474a359e0993e59b6 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-11-26fib: reduce save_rewrite_length to u8Klement Sekera1-2/+12
This is a preparation step for migrating NAT to use SVR (shallow virtual reassembly) to conserve space in vnet_buffer. Since max rewrite length is currently pre-data size (128), u8 is sufficient to hold that value. Type: refactor Change-Id: I5374bb396e178245b870cb0bbf1370d2a54230bc Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-10-22ip: reassembly: avoid corruption in vnet bufferKlement Sekera1-17/+18
Avoid corrupt next_index in vnet_buffer by moving input and output variables into different memory places instead of sharing a common space. Type: fix Fixes: de34c35fc73226943538149fae9dbc5cfbdc6e75 Change-Id: I34471fc6d0c8487535fac21349e688f398934f6d Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-10-09mpls: support fragmentation of mpls output packetRajesh Goel1-0/+4
Type: fix Signed-off-by: Rajesh Goel <rajegoel@cisco.com> Change-Id: Ie4372c5cf58ab215cdec5ce56f8a994daaba2844
2019-09-26ip: add shallow virtual reassembly functionalityKlement Sekera1-7/+32
Type: feature Change-Id: Ibc8334e26c7e6f6120696c3e313b6e11d73dab99 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-07-22gso: Fix the l3 packet gso segment sizeMohsin Kazmi1-1/+4
Type: fix Ticket: VPP-1721 Change-Id: I7a5d4f1440048ddc9f599ac11d06e5a7df20440e Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-07-05sctp: move to plugins, disabled by defaultFlorin Coras1-14/+0
Removed sctp buffer metadata from vnet/buffer.h, added it to the plugin. Add registration APIs for plugin-based vlib_buffer_opaque / opaque2 decoders, used by "pcap dispatch trace ..." for display in the wireshark dissector. Type:refactor Not actively maintained. Change-Id: Ie4cb6ba66f68b3b3a7d7d2c63c917fdccf994371 Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2019-06-21tcp: add option to pass opaque to next nodeFlorin Coras1-1/+5
Type:feature Change-Id: I0b72954a6ae6a05abe0761cb4f227072863f127b Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-06-18ipsec: ipsec-tun protectNeale Ranns1-0/+1
please consult the new tunnel proposal at: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18ip: reassembly-separate feature and custom codeKlement Sekera1-2/+2
This change is made fix a crash, because is_feature flag semantics turn out to be different from "custom app code" semantics. Introduce a flag which custom plugins/apps can use to instead of tying that code to is_feature flag. Change-Id: Ief5898711e68529f9306cfac54c4dc9b3650f9e3 Ticket: N/A Type: fix Fixes: 21aa8f1022590b8b5caf819b4bbd485de0f1dfe5 Signed-off-by: Klement Sekera <ksekera@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2019-06-06DVR: Control the reinject as L2 or L3 based on the output interface typeNeale Ranns1-1/+1
Change-Id: Ib4cdbe8a6a1d10a643941c13aa0acbed410f876c Type: Feature Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-06reassembly: support more custom options for appsKlement Sekera1-0/+1
Change-Id: Ib9f98fba5a724480ca95f11a762002c53e08df70 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-03-29IPSEC-GRE: fixes and API update to common types.Neale Ranns1-1/+0
Change-Id: Icdcbac7453baa837a9c0c4a2401dff4a6aa6cba0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-06GBP: use sclass in the DP for policyNeale Ranns1-5/+1
Change-Id: I154e18f22ec7708127b8ade98e80546ab1dcd05b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-04Hash and handoff reassembly fragmentsVijayabhaskar Katamreddy1-0/+2
in the following two scenarios 1. When fragments arrive in multiple interfaces and endup in different threads 2. When fragments arrive in same interafce but in different queues due to interface RSS doesnt have the ability to place fragments in the right queues Change-Id: I9f9a8a4085692055ef6823d634c8e19ff3daea05 Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2019-02-19tap gso: experimental supportAndrew Yourtchenko1-9/+26
This commit adds a "gso" parameter to existing "create tap..." CLI, and a "no-gso" parameter for the compatibility with the future, when/if defaults change. It makes use of the lowest bit of the "tap_flags" field in the API call in order to allow creation of GSO interfaces via API as well. It does the necessary syscalls to enable the GSO and checksum offload support on the kernel side and sets two flags on the interface: virtio-specific virtio_if_t.gso_enabled, and vnet_hw_interface_t.flags & VNET_HW_INTERFACE_FLAG_SUPPORTS_GSO. The first one, if enabled, triggers the marking of the GSO-encapsulated packets on ingress with VNET_BUFFER_F_GSO flag, and setting vnet_buffer2(b)->gso_size to the desired L4 payload size. VNET_HW_INTERFACE_FLAG_SUPPORTS_GSO determines the egress packet processing in interface-output for such packets: When the flag is set, they are sent out almost as usual (just taking care to set the vnet header for virtio). When the flag is not enabled (the case for most interfaces), the egress path performs the re-segmentation such that the L4 payload of the transmitted packets equals gso_size. The operations in the datapath are enabled only when there is at least one GSO-compatible interface in the system - this is done by tracking the count in interface_main.gso_interface_count. This way the impact of conditional checks for the setups that do not use GSO is minimized. "show tap" CLI shows the state of the GSO flag on the interface, and the total count of GSO-enabled interfaces (which is used to enable the GSO-related processing in the packet path). This commit lacks IPv6 extension header traversal support of any kind - the L4 payload is assumed to follow the IPv6 header. Also it performs the offloads only for TCP (TSO - TCP segmentation offload). The UDP fragmentation offload (UFO) is not part of it. For debug purposes it also adds the debug CLI: "set tap gso {<interface> | sw_if_index <sw_idx>} <enable|disable>" Change-Id: Ifd562db89adcc2208094b3d1032cee8c307aaef9 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-01-22GBP: Sclass to src-epg conversionsNeale Ranns1-1/+5
Change-Id: Ica88268fd6a6ee01da7e9219bb4e81f22ed2fd4b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-02Revert "add ipsecmb plugin"Florin Coras1-4/+0
This reverts commit be16020c5034bc69df25a8ecd7081aec9898d93c. The arm verify job actually failed but the result was overwritten by an x86 ubuntu retry. Change-Id: Idcae7691fc575053563b8ff8bcad661c15891668 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-01-02add ipsecmb pluginKlement Sekera1-0/+4
Change-Id: I99c0737dfeeec2db267773625ddc9b55324fd237 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-12-04Add VNET_BUFFER_F_AVAIL definitionsDave Barach1-1/+25
Add a check to make sure that the vlib and vnet buffer flag bit definitions do not overlap. The VNET_BUFFER_F_AVAIL1...8 definitions allow out-of-tree codes to: #define VNET_BUFFER_F_MY_USECASE VNET_BUFFER_F_AVAIL1 and so on. This avoids introducing irrelevant and/or proprietary bit definitions into vnet/buffer.h, and hopefully minimizes merge pain for everyone involved. Change-Id: I5be4f61dceb81b5bfca005f6d609ade074af205b Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-30Metadata / opaque formatting belongs in vppDave Barach1-22/+22
VPP graph dispatch trace record description: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Major Version | Minor Version | NStrings | ProtoHint | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Buffer index (big endian) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + VPP graph node name ... ... | NULL octet | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Buffer Metadata ... ... | NULL octet | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Buffer Opaque ... ... | NULL octet | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Buffer Opaque 2 ... ... | NULL octet | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | VPP ASCII packet trace (if NStrings > 4) | NULL octet | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Packet data (up to 16K) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Graph dispatch records comprise a version stamp, an indication of how many NULL-terminated strings will follow the record header, and a protocol hint. The buffer index allows downstream consumers of these data to easily filter/track single packets as they traverse the forwarding graph. FWIW, the 32-bit buffer index is stored in big endian format. As of this writing, major version = 1, minor version = 0. Nstrings will be either 4 or 5. Here is the current set of protocol hints: typedef enum { VLIB_NODE_PROTO_HINT_NONE = 0, VLIB_NODE_PROTO_HINT_ETHERNET, VLIB_NODE_PROTO_HINT_IP4, VLIB_NODE_PROTO_HINT_IP6, VLIB_NODE_PROTO_HINT_TCP, VLIB_NODE_PROTO_HINT_UDP, VLIB_NODE_N_PROTO_HINTS, } vlib_node_proto_hint_t; Example: VLIB_NODE_PROTO_HINT_IP6 means that the first octet of packet data SHOULD be 0x60, and should begin an ipv6 packet header. Change-Id: Idf310bad80cc0e4207394c80f18db5f77c378741 Signed-off-by: Dave Barach <dave@barachs.net>
2018-09-27IPIP and IPv6 fragmentationOle Troan1-1/+0
- Error where ICMPv6 error code doesn't reset VLIB_TX = -1 Leading to crash for ICMP generated on tunnelled packets - Missed setting VNET_BUFFER_F_LOCALLY_ORIGINATED, so IP in IPv6 packets never got fragmented. - Add support for fragmentation of buffer chains. - Remove support for inner fragmentation in frag code itself. Change-Id: If9a97301b7e35ca97ffa5c0fada2b9e7e7dbfb27 Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra1-4/+4
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-09-10vxlan-gbp: Add support for vxlan gbpMohsin Kazmi1-1/+3
This patch implements vxlan with extension of group based policy support. Change-Id: I70405bf7332c02867286da8958d9652837edd3c2 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-08-03loop counter to prevent infiinte number of look ups per-packetNeale Ranns1-1/+3
Change-Id: I59235d11baac18785a4c90cdaf14e8f3ddf06dab Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-19Cleanup of handoff codeDamjan Marion1-15/+0
- removed handoff-dispatch node - removed some unused buffer metadata fields - enqueue to thread logic moved to inline function Change-Id: I7361e1d88f8cce74cd4fcec90d172eade1855cbd Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-02Fixing ip4-reassembly ip6-reassembly non feature node, next_node_index settingVijayabhaskar Katamreddy1-1/+0
Change-Id: Ib988d87e6758ffa31862096391f9f286b0797f2b Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-06-25MAP: Move MAP-E/T to a plugin.Ole Troan1-8/+0
Only remaining traces of MAP in the src/vnet is now in buffer.h. Awaiting a new buffer opaque API (hint, hint). Change-Id: Ie165561484731f1d7ed6e0f604b43624e06db3f0 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-08Adding pad for reasm vnet_buffer reasm struct sothat adj_index is retainedVijayabhaskar Katamreddy1-0/+1
Change-Id: Ib756c4f3e8caba1f77ef48b62a2a5d7283fe5016 Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-06-04Remove unused GRE buffer meta-dataNeale Ranns1-6/+0
Change-Id: Ia8ef019742c13b1149916d51796cad6f50687162 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-17Packet generator: preserve pcap file timestampsDave Barach1-0/+5
Set vnet_buffer2(b0)->pg_replay_timestamp, for use when desired. Fix a memory leak in pg_stream_free(...), which wasn't freeing the replay packet templates. Change-Id: I01822a9e91a52de4774d2b95cf0c2ee254a915e9 Signed-off-by: Dave Barach <dave@barachs.net>
2018-04-27A bit of buffer metadata reshuffling to accommodate flow_idDamjan Marion1-1/+2
Change-Id: I2794384557c6272fe217269b14a9db09eda19220 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13GBP V2Neale Ranns1-1/+7
update the GBP plugin to implement the full NAT feature set of opflex agent Change-Id: Ic06a039c889445ed0b9087fa1f292634192b0f8d Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-21reassembly: feature/concurrencyKlement Sekera1-8/+17
This change makes ip reassembly an interface feature, while adding concurrency support. Due to this, punt is no longer needed to test reassembly. Change-Id: I467669514ec33283ce935be0f1dd08f07684f0c7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-16QoS recording and markingNeale Ranns1-5/+21
Change-Id: Ie5a50def4ec1e4a3b3404a8b6ab9ec248bc16744 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-09MPLS Unifom modeNeale Ranns1-0/+2
- support both pipe and uniform modes for all MPLS LSP - all API programming for output-labels requires that the mode (and associated data) is specificed - API changes in MPLS, BIER and IP are involved - new DPO [sub] types for MPLS labels to handle the two modes. Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-02-21SCTP: minor refactorMarco Varlese1-1/+1
This patch adds some missing information in various debugging messages which can help with debugging state-machine and connection-tracking. It also renames some internal variable names for better code readibility. Change-Id: I68503fc0214300032f7514426c8b5b2b12edf11a Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-02-17SCTP: 'multi-home' supportMarco Varlese1-0/+1
This patch addresses the SCTP requirement for multiple sub-connections to implement the so called 'multi-homed' scenario. Change-Id: Ibce18f216e9d2bebe318992c441bf278e16aad17 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-02-07Refactor vlib_buffer flagsDamjan Marion1-26/+7
Change-Id: I853386aebfe488ebb10328435b81b6e3403c5dd0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-01IPv4/6 reassemblyKlement Sekera1-0/+12
Change-Id: Ic5dcadd13c88b8a5e7896dab82404509c081614a Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-01-31Fix VNET_BUFFER_F_SPAN_CLONE flagDamjan Marion1-1/+1
Change-Id: I670e41bcfc61a45555431603c937f8dad4d165e9 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-01-29DRAFT ip4/6_frag to support DPO Style based Next NodeVijayabhaskar Katamreddy1-0/+1
Change-Id: I1df3d23c1c5668b83d52b41f51c0e3f24183af9e Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>