Age | Commit message (Collapse) | Author | Files | Lines |
|
The /sys filesystem is not always accurate when switching network
namespaces. Using netlink should work in more situations.
Type: improvement
Change-Id: I71611f14319820469ea7794eec5b7c6c70e2be6d
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Type: improvement
This patch adds flags to represent the modern NICs capabilities.
Change-Id: I96d38d9ab7eac55974d72795cd100d8337168e1e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
This patch refactors the offload flags in vlib_buffer_t.
There are two main reasons behind this refactoring.
First, offload flags are insufficient to represent outer
and inner headers offloads. Second, room for these flags
in first cacheline of vlib_buffer_t is also limited.
This patch introduces a generic offload flag in first
cacheline. And detailed offload flags in 2nd cacheline
of the structure for performance optimization.
Change-Id: Icc363a142fb9208ec7113ab5bbfc8230181f6004
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Set the GSO flag when buffer length exceeds the
linux mtu. Don't listen for mtu changes on linux
side for now.
This also fixes a TX issue, as we only search for
valid frames on tx to the extent of n_left, we might
stay stuck.
Change-Id: Idf0bdd88990254a614962c2f7bc3e0292ccfd61a
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Change-Id: If8077280cef501599f810ad9255efa2a5a451ced
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: improvement
|
|
Type: refactor
Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
When using classifier to filter traces, not all packets will be traced.
In that case, we should only count traced packets.
Type: fix
Change-Id: I87d1e217b580ebff8c6ade7860eb43950420ae78
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This is part of bigger refactor.
Type: refactor
Change-Id: I6fc2c0a1e2d217a70952901bcf775b8485bd3c20
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix and optimize DMAC check in ethernet-input node to utilize NIC or
driver which support L3 DMAC-filtering mode so that DMAC check can be
bypassed safely for interfaces/sub-interfaces in L3 mode.
Checking of interface in L3-DMAC-filtering state to avoid DMAC check
require the following:
a) Fix interface driver init sequence for devices which supports L3
DMAC-filtering to indicate its capability and initialize interface
to L3 DMAC-filtering state.
b) Fix ethernet_set_flags() function and its associated callback
flags_change() functions registered by various drivers in interface
infra to provide proper L3 DMAC filtering status.
Maintain interface/sub-interface L3 config count so DMAC checks can be
bypassed if L3 forwarding is not setup on any main/sub-interfaces.
Type: fix
Ticket: VPP-1868
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
|
|
Type: docs
Signed-off-by: John DeNisco <jdenisco@cisco.com>
Change-Id: I7280e5c5ad10a66c0787a5282291a2ef000bff5f
|
|
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
|
|
Type: feature
fts and trex rely on yaml config files. Verify
that they are valid, so comitters can catch
errors early.
Change-Id: Ide0bb276659119c59bdbbc8b8155e37562a648b8
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: docs
Change-Id: I039ba9ad5385452b202366fba0b367506a21ea4f
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Use consistent API types.
- fix af_packet_dump dumping deleted interface
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ie8d138e30c8c51a2306bb2ad9ac0b7a49d5412bf
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Per interface, next hop graph node can be customized
with vnet_hw_interface_rx_redirect_to_node function,
but it doesn't work well for af-packet type interface.
In current implementation, with function
af_packet_set_interface_next_node invoked next hop graph
node index can be set to apif->per_interface_next_index,
but it's not set to next0 properly for packet processing
in af_packet_device_input_fn.
Type: fix
Signed-off-by: Michael Yu <michael.a.yu@nokia-sbell.com>
Change-Id: I8e132ddd1c3c01b6f476de78546d4a9389b3ff87
Signed-off-by: Michael Yu <michael.a.yu@nokia-sbell.com>
|
|
1. Fix af_packet memory leak;
2. Fix close socket twice;
3. Adjust debug log for syscall;
4. Adjust dhcp client output log;
Change-Id: I96bfaef16c4fad80c5da0d9ac602f911fee1670d
Signed-off-by: jackiechen1985 <xiaobo.chen@tieto.com>
|
|
Change-Id: I215e1e0208a073db80ec6f87695d734cf40fabe3
Signed-off-by: Jim Thompson <jim@netgate.com>
|
|
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I8819bcb9e228e7a432f4a7b67b6107f984927cd4
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I911fb3f1c6351b37580c5dbde6939a549431a92d
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I4e836244409c98739a13092ee252542a2c5fe259
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Example:
buffers {
default data-size 1536
}
Change-Id: I5b4436850ca18025c9fdcfc7ed648c2c2732d660
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: If2bbfbc52994f5de0879763e0b7a7864498debb6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Typically we have scalar_size == 0, so it doesn't matter
but vlib_frame_args was providing pointer to scalar frame
data, not vector data. To avoid future confusion function
is renamed to vlib_frame_scalar_args(...)
Change-Id: I48b75523b46d487feea24f3f3cb10c528dde516f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
also some moving of l2 headers to reduce dependencies
Change-Id: I7a700a411a91451ef13fd65f9c90de2432b793bb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
It is cheaper to get thread index from vlib_main_t if available...
Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I8d8ecc80edb7665125ba625a3ce7b30d2dea88f0
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I4cc6a20b69cce2aa52768a27c5d455eb098224c8
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I84327197d59c72d0d046dd2cb4071bf74af6fc28
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I47768ea50140222fec54e97cbaff2049bd3cb599
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
receiving pkts from other interfaces
Change-Id: Ie40ee9129edaac717e716b469f4d10f3c29a4932
Signed-off-by: Chaoyu Jin <chjin@cisco.com>
|
|
ouptut
Change-Id: I6f75b7328fd0aa71d00a701e36c8b4ad06bff3c4
Signed-off-by: Chaoyu Jin <chjin@cisco.com>
|
|
In multi-worker cases, af-packet tx was subject to a pretty
serious race condition as the device lock was obtained
after some queue values were read from queue.
Result could go from packet loss to queue inconsistency, leading
to tx being stuck for 'some time'.
The fix is really simple. Finding the problem was not...
Change-Id: Ib18967b7459a8609428a56de934c577cea87b165
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
This patch teaches worer threads to sleep and to be waken up by
kernel if there is activity on file desctiptors assigned to that thread.
It also adds counters to epoll file descriptors and new
debug cli 'show unix file'.
Change-Id: Iaf67869f4aa88ff5b0a08982e1c08474013107c4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This is a version of the VPP API generator in Python PLY. It supports
the existing language, and has a plugin architecture for generators.
Currently C and JSON are supported.
Changes:
- vl_api_version to option version = "major.minor.patch"
- enum support
- Added error checking and reporting
- import support (removed the C pre-processor)
- services (tying request/reply together)
Version:
option version = "1.0.0";
Enum:
enum colours {
RED,
BLUE = 50,
};
define foo {
vl_api_colours_t colours;
};
Services:
service {
rpc foo returns foo_reply;
rpc foo_dump returns stream foo_details;
rpc want_stats returns want_stats_reply
events ip4_counters, ip6_counters;
};
Future planned features:
- unions
- bool, text
- array support (including length)
- proto3 output plugin
- Refactor C/C++ generator as a plugin
- Refactor Java generator as a plugin
Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Id6607adbe5da8ae8472dde8bb442ca5f68f6d84f
Signed-off-by: zhaoqingling <zhao.qingling@zte.com.cn>
|
|
Change-Id: I2fde74b53d6b4dc54d4af7020130f7b22463d70f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This reverts commit fa600c9169c0d7104af7a9be12a0471a8a8c8262.
Change-Id: I873b53b2c025d7aba2211cab9b3e2d780af33b32
Signed-off-by: Jakub Grajciar <Jakub.Grajciar@pantheon.tech>
|
|
Change-Id: Ie07b71977c46d2f1e030799a08cc5af0fdc397aa
Signed-off-by: Jakub Grajciar <Jakub.Grajciar@pantheon.tech>
|
|
Change-Id: I42ee5898e1f775692811eebab11bcfe458f1ec63
Signed-off-by: Jakub Grajciar <Jakub.Grajciar@pantheon.tech>
|
|
- Global variables declared in header files without
the use of the 'extern' keword will result in multiple
instances of the variable to be created by the compiler
-- one for each different source file in which the
the header file is included. This results in wasted
memory allocated in the BSS segments as well as
potentially introducing bugs in the application.
Change-Id: I6ef1790b60a0bd9dd3994f8510723decf258b0cc
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I1075e5d2a1b6dfe3a443b40b41b8458a30505680
Signed-off-by: Jakub Grajciar <Jakub.Grajciar@pantheon.tech>
Signed-off-by: Jakub.Grajciar@pantheon.tech <Jakub.Grajciar@pantheon.tech>
|
|
Issues observed with specific kernel versions, e.g. stock Ubuntu 16.04
kernel.
This reverts commit 3eab064e3fadaf2a6a128f167ad04ca0319b4e17.
Change-Id: I24241f3b580df749fc686af3a319011ca035fb5e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Add one of these statements to foo.api:
vl_api_version 1.2.3
to generate a version tuple stanza in foo.api.h:
/****** Version tuple *****/
vl_api_version_tuple(foo, 1, 2, 3)
Change-Id: Ic514439e4677999daa8463a94f948f76b132ff15
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
- always use 'va_args' as pointer in all format_* functions
- u32 for all 'indent' params as it's declaration was inconsistent
Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79
Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
|
|
1. Add VNET headers support for checksumming - required
to operate correctly on any recent Linux
2. Bypass QDISC on transmit - improves performance by ~ 5%.
Enabled only if the macro is detected - apparently not
present on archaic distributions.
This still does not solve all issues with TSO - it can be
fixed only by going to tpacket v3 and dynamic rx ring as
well as significant changes in the TX (sendmmsg?).
Change-Id: Iea14ade12586c0a8da49e6dd1012108a08bc85b3
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
|
|
On host interface if a VLAN tagged packet is received, linux kernel removes
the VLAN header from packet byte stream and adds metadata in tpacket2_hdr.
This patch explicitely checks for the presense of VLAN metadata and adds it
in VPP packet.
Change-Id: I0ba35c1e98dbc008ce18d032f22f2717d610c1aa
Signed-off-by: Akshaya N <akshaya@rtbrick.com>
|