aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/devices/tap
AgeCommit message (Collapse)AuthorFilesLines
2019-04-17tap: clean-up when linux will delete the tap interfaceMohsin Kazmi1-0/+42
When container is deleted which has tap interface attached, Linux also delete the tap interface leaving the VPP side of tap. This patch does a clean up job to remove that VPP side of tap interface. To produce the behavior: In VPP: create tap On linux: sudo ip netns add ns1 sudo ip link set dev tap0 netns ns1 sudo ip netns del ns1 Change-Id: Iaed1700073a9dc64e626c1d0c449f466c143f3ae Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-04-15tap: fix the crashMohsin Kazmi1-0/+3
Crash will happen when someone will try to setup a tap interface in host namespace without providing the host side of tap interface custom name. This patch fixes the problem by using the default name in this case. Change-Id: Ic1eaea5abd01bc6c766d0e0fcacae29ab7a7ec45 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-04-10API: Fix shared memory only action handlers.Ole Troan1-23/+1
Some API action handlers called vl_msg_ai_send_shmem() directly. That breaks Unix domain socket API transport. A couple (bond / vhost) also tried to send a sw_interface_event directly, but did not send the message to all that had registred interest. That scheme never worked correctly. Refactored and improved the interface event code. Change-Id: Idb90edfd8703c6ae593b36b4eeb4d3ed7da5c808 Signed-off-by: Ole Troan <ot@cisco.com>
2019-04-03virtio: Add support for multiqueueMohsin Kazmi1-12/+27
Change-Id: Id71ffa77e977651f219ac09d1feef334851209e1 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-03-28Add RDMA ibverb driver pluginBenoît Ganne1-10/+2
RDMA ibverb is a userspace API to efficiently rx/tx packets. This is an initial, unoptimized driver targeting Mellanox cards. Next steps should include batching, multiqueue and additional cards. Change-Id: I0309c7a543f75f2f9317eaf63ca502ac7a093ef9 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-03-15Revert "API: Cleanup APIs interface.api"Ole Trøan1-1/+2
This reverts commit e63325e3ca03c847963863446345e6c80a2c0cfd. Allow time for CSIT to accommodate. Change-Id: I59435e4ab5e05e36a2796c3bf44889b5d4823cc2 Signed-off-by: ot@cisco.com
2019-03-15API: Cleanup APIs interface.apiJakub Grajciar1-2/+1
Use of consistent API types for interface.api Change-Id: Ieb54cebb4ac96b432a3f0b41596718aa2f34885b Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-02-22tapv2: coverity strikes backSteven Luong1-5/+4
while https://gerrit.fd.io/r/#/c/16590/ fixed the leaked fd which coverity reported at that time, new coverity run reports simailar leaked fd in a different goto punt path. It would be nice if coverity reported both of them at the same time. Or perhaps it did and I just missed it. Anyway, the new fix is to put the close (fd) statement prior to the return of tap_create_if routine which should catch all goto's. Change-Id: I0a51ed3710e32d5d74c9cd9b5066a667153e2f9d Signed-off-by: Steven Luong <sluong@cisco.com>
2019-02-19tap gso: experimental supportAndrew Yourtchenko3-1/+127
This commit adds a "gso" parameter to existing "create tap..." CLI, and a "no-gso" parameter for the compatibility with the future, when/if defaults change. It makes use of the lowest bit of the "tap_flags" field in the API call in order to allow creation of GSO interfaces via API as well. It does the necessary syscalls to enable the GSO and checksum offload support on the kernel side and sets two flags on the interface: virtio-specific virtio_if_t.gso_enabled, and vnet_hw_interface_t.flags & VNET_HW_INTERFACE_FLAG_SUPPORTS_GSO. The first one, if enabled, triggers the marking of the GSO-encapsulated packets on ingress with VNET_BUFFER_F_GSO flag, and setting vnet_buffer2(b)->gso_size to the desired L4 payload size. VNET_HW_INTERFACE_FLAG_SUPPORTS_GSO determines the egress packet processing in interface-output for such packets: When the flag is set, they are sent out almost as usual (just taking care to set the vnet header for virtio). When the flag is not enabled (the case for most interfaces), the egress path performs the re-segmentation such that the L4 payload of the transmitted packets equals gso_size. The operations in the datapath are enabled only when there is at least one GSO-compatible interface in the system - this is done by tracking the count in interface_main.gso_interface_count. This way the impact of conditional checks for the setups that do not use GSO is minimized. "show tap" CLI shows the state of the GSO flag on the interface, and the total count of GSO-enabled interfaces (which is used to enable the GSO-related processing in the packet path). This commit lacks IPv6 extension header traversal support of any kind - the L4 payload is assumed to follow the IPv6 header. Also it performs the offloads only for TCP (TSO - TCP segmentation offload). The UDP fragmentation offload (UFO) is not part of it. For debug purposes it also adds the debug CLI: "set tap gso {<interface> | sw_if_index <sw_idx>} <enable|disable>" Change-Id: Ifd562db89adcc2208094b3d1032cee8c307aaef9 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-02-06virtio: Use new buffer optimizationMohsin Kazmi1-0/+1
Change-Id: Ifc98373371b967c49a75989eac415ddda1dcf15f Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-01-21virtio: Native virtio driverMohsin Kazmi2-106/+20
Change-Id: Id7fccf2f805e578fb05032aeb2b649a74c3c0e56 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-01-07tapv2: add "tap_flags" field to the TAPv2 interface APIAndrew Yourtchenko3-0/+8
Change-Id: I26f99d95f52c9fe107d17dcbbf5c6185523beade Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-12-22tapv2: coverity woeSteven1-2/+4
coverity complains about fd leaking inside the if statement because there is a goto which bypasses the statement close (fd). The fix is to close (fd) immediately after it is no longer used. Change-Id: Ic5035b07ec1f179ff3db77744843e47aa8067a3c Signed-off-by: Steven <sluong@cisco.com>
2018-10-23c11 safe string handling supportDave Barach2-8/+8
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-06-22Update tapv2 documentationIan Wells1-1/+1
The documentation in the API file says that 0xffff == 'no interface ID specified' but the code tests against ~(u32)0. Change-Id: I5cd83d876c3ad4f53a5b01463299d4fcb806ea98 Signed-off-by: Ian Wells <iawells@cisco.com>
2018-06-05VPP-1305: Add support for tagsJerome Tollet2-2/+18
Change-Id: I9e759037295fe675abe426e565a562b1ec1e7d33 Signed-off-by: Jerome Tollet <jtollet@cisco.com>
2018-05-18tap: remove the local vlib_log_info definitionMohsin Kazmi1-9/+3
Change-Id: Idff55a19d27fed0d57e222f38d2e16c5367911cb Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-04-27TAP memory leaks:Neale Ranns2-26/+18
1 - use bit-map to re-use ID values and thus VLIB nodes 2 - free vrings 3 - free hw_address on HW interface delete (a HW * struct is memset on pool_get) 4 - free temporary node names during TX node setup Change-Id: Id114c8bb9c844fd4ceb02fbbeb4b511ecfeb61ce Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-17Add logging supportDamjan Marion2-0/+12
Change-Id: Ieac9cf50156dbbb4962411e900d59256441915ef Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-30tapv2: Sporadic SIGABRT in ethernet_input [VPP-1183]Steven1-2/+3
virtio_free_rx_buffers uses the wrong slot in the vring to get the buffer index. It uses desc_next. It should be last_used_idx which is the slot number for the first valid descriptor. Change-Id: I6b62b794f06869fbffffce45430b8b2e37b1266c Signed-off-by: Steven <sluong@cisco.com>
2018-03-02tapv2: CLI and binary API fixesSteven2-3/+3
1. When interface create encouners an error (see test below), the same id cannot be used again. This is due to hash_set is called too early in the function. After the hash entry is set, there are different errors may cause the interface create to be aborted. But we didn't remove the hash entry when error is encountered. The fix is to move the hash_set call near the end which has no more "goto error" DBGvpp# create tap id 1 rx-ring-size 1021 tx-ring-size 1021 create tap id 1 rx-ring-size 1021 tx-ring-size 1021 create tap: ring size must be power of 2 DBGvpp# create tap id 1 rx-ring-size 1024 tx-ring-size 1024 create tap id 1 rx-ring-size 1024 tx-ring-size 1024 create tap: interface already exists DBGvpp# 2. multiple issues exist with api_format.c with the below command binary-api tap_create_v2 id 4 hw-addr 90:e2:ba:76:cf:2f rx-ring-size 1024 tx-ring-size 1024 - hw_addr is not taken due to the test for random mac is inverted - id is an integer, not a string - integer values were not converted to network format Change-Id: I5a669d702a80ad158517df46f0ab089e4d0d692e Signed-off-by: Steven <sluong@cisco.com>
2018-02-28tapv2: abort in tap_create_if (VPP-1179)Steven1-0/+1
The following command sequences cause the crash: create tap id 0 rx-ring-size 1024 tx-ring-size 1024 create tap id 1 rx-ring-size 1024 tx-ring-size 1024 set interface state tap0 up set interface state tap1 up delete tap tap0 delete tap tap1 create tap id 0 rx-ring-size 1024 tx-ring-size 1024 0: /home/sluong/vpp2/vpp/build-data/../src/vnet/interface_funcs.h:46 (vnet_get_hw_interface) assertion `! pool_is_free (vnm->interface_main.hw_interfaces, _e)' fails The reason for the crash is because when the tap interface is deleted, the code does not remove the entry from the device queue. But the interface is deleted anyway from vnet_main.interface_main.hw_interfaces. When an interface is created again, it may encounter the deleted entry in the device queue and crash. Notice create and delete a single entry does not cause a crash. Need to create and delete 2 interfaces to create a "hole" in the device queue. Change-Id: I42ce0b7943d73b3eab32a16751a0a3183de62d9f Signed-off-by: Steven <sluong@cisco.com>
2018-02-19virtio: add missing tx lock when running multithreadedDamjan Marion1-0/+4
Change-Id: I373f429c53c6f66ad38322addcfaccddb7761392 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-01-23VPPAPIGEN: vppapigen replacement in Python PLY.Ole Troan1-1/+1
This is a version of the VPP API generator in Python PLY. It supports the existing language, and has a plugin architecture for generators. Currently C and JSON are supported. Changes: - vl_api_version to option version = "major.minor.patch" - enum support - Added error checking and reporting - import support (removed the C pre-processor) - services (tying request/reply together) Version: option version = "1.0.0"; Enum: enum colours { RED, BLUE = 50, }; define foo { vl_api_colours_t colours; }; Services: service { rpc foo returns foo_reply; rpc foo_dump returns stream foo_details; rpc want_stats returns want_stats_reply events ip4_counters, ip6_counters; }; Future planned features: - unions - bool, text - array support (including length) - proto3 output plugin - Refactor C/C++ generator as a plugin - Refactor Java generator as a plugin Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf Signed-off-by: Ole Troan <ot@cisco.com>
2018-01-18tapv2: add option to set host-side default gwDamjan Marion5-2/+53
Change-Id: I76fd655ecd9445299b94b3b5af10e7b1588584e4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-01-16tapv2: deleting tap interface may leak buffers (VPP-1124)Steven1-2/+2
Buffers may be allocated for indirect descriptors by tx thread and they are freed when tx thread is invoked in the next invocation. This is to allow the recipient (kernel) to have a chance to process them. But if the tap interface is deleted, the tx thread may not yet be called to clean up the indirect descriptors' buffers. In that case, we need to remove them without waiting for the tx thread to be called. Failure to do so may cause buffers leak when the tap interface is deleted. For the RX ring, leakage also exists for vring->buffers when the interface is removed. Change-Id: I3df313a0e60334776b19daf51a9f5bf20dfdc489 Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit d8a998e74b815dd3725dfcd80080e4e540940236)
2018-01-11api: remove transport specific code from handlersFlorin Coras1-18/+19
This does not update api client code. In other words, if the client assumes the transport is shmem based, this patch does not change that. Furthermore, code that checks queue size, for tail dropping, is not updated. Done for the following apis: Plugins - acl - gtpu - memif - nat - pppoe VNET - bfd - bier - tapv2 - vhost user - dhcp - flow - geneve - ip - punt - ipsec/ipsec-gre - l2 - l2tp - lisp-cp/one-cp - lisp-gpe - map - mpls - policer - session - span - udp - tap - vxlan/vxlan-gpe - interface VPP - api/api.c OAM - oam_api.c Stats - stats.c Change-Id: I0e33ecefb2bdab0295698c0add948068a5a83345 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-09api: refactor vlibmemoryFlorin Coras1-6/+5
- separate client/server code for both memory and socket apis - separate memory api code from generic vlib api code - move unix_shared_memory_fifo to svm and rename to svm_fifo_t - overall declutter Change-Id: I90cdd98ff74d0787d58825b914b0f1eafcfa4dc2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-12-14tap_v2: include host-side parameters in the dump binary APIMilan Lenco4-7/+99
Change-Id: I097a738b96a304621520f1842dcac7dbf61a8e3f Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
2017-12-11call unformat_free in some flow, remove unnecessary callsSwarup Nayak1-3/+5
Change-Id: I565277eafbce3d4f59a7f0d497fca1c4fed3cfc8 Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
2017-12-10tap_v2: fix issues reported by coverityDamjan Marion1-3/+3
Change-Id: I1bbd3f6ece255edfd4ebf268ac60f79dce1d10e7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-12-08tapv2: multiple improvementsDamjan Marion5-70/+225
- change interface naming scheme - rework netlink code - add option to set link address, namespace Change-Id: Icf667babb3077a07617b0b87c45c957e345cb4d1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-12-05tap_v2: convert ring size from network to host orderMilan Lenco1-2/+2
Change-Id: Ica1be5c75c83ac64c7063bfeff1f4d00702a00e1 Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
2017-12-04tap_v2: move code to vnet/devices/tapDamjan Marion5-0/+1068
virtio backend stays in vnet/devices/virtio Change-Id: Idbf04f1c645a809ed408670ba330662859fe9309 Signed-off-by: Damjan Marion <damarion@cisco.com>