summaryrefslogtreecommitdiffstats
path: root/src/vnet/devices/virtio
AgeCommit message (Collapse)AuthorFilesLines
2020-01-02virtio: fix checksum offload supportBenoît Ganne1-10/+21
Checksum offload and GSO are independent. We must support checksum offload if it has been negotiated, independently of GSO. Ticket: VPPSUPP-47 Type: fix Change-Id: I8cb6dd58b61714ebb2726eb4aab0d74d49fdab99 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-12-17virtio: fix the tx queue thread bindingMohsin Kazmi1-3/+17
Type: fix Change-Id: Ibbe7e20aebc9153ceba07e048dc0eaa45193f4ea Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-12-11devices: vhost API cleanupJakub Grajciar5-26/+171
Use consistent API types. Type: fix Change-Id: I2dec594cb834a45004edc9ca58ad7c7b4bd7ff06 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-12-10api: multiple connections per processDave Barach2-2/+2
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
2019-12-06gso: fix the tap/virtio driver for header offsetMohsin Kazmi1-1/+25
Type: fix Change-Id: Ied34466907fa8ad44f997c600dbf481be4d22027 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-12-05gso: add protocol header parserMohsin Kazmi1-33/+10
Type: feature Change-Id: I7c6be2b96d19f82be237f6159944f3164ea512d0 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-12-04gso: remove the interface countMohsin Kazmi3-10/+1
Type: refactor Change-Id: I51405b9d09fb6fb03d08569369fdd4e11c647908 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-11-20tap: multiqueue supportDamjan Marion2-38/+15
Type: feature Change-Id: I7dcc8c6911d02729b3bda1b3a21a211c82c3b949 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-11-20virtio: fix use-after-freeBenoît Ganne1-1/+1
Type: fix Change-Id: Ic67d9da65d937f56ecf994a5504c6351624b32ff Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-11-14virtio: refactor virtio-pci loggingDamjan Marion7-96/+143
Type: refactor Change-Id: I34306c1206b2bf5f521be6c6b78074ccf9259a08 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-11-13virtio: feature arc have higher priority than redirectDamjan Marion1-3/+4
Type: fix Fixes: 8389fb9 Change-Id: Ie159eb444b28b36a7af86049b80fba4e49be93cb Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-11-12virtio: remove unused codeDamjan Marion1-4/+0
Type: refactor Change-Id: I25f1cc3969c6a6ec1384079dc437537acd2ec152 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-11-06build: add yaml file linting to make checkstylePaul Vinciguerra1-1/+3
Type: feature fts and trex rely on yaml config files. Verify that they are valid, so comitters can catch errors early. Change-Id: Ide0bb276659119c59bdbbc8b8155e37562a648b8 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-10-30docs: devices-- add FEATURES.yamlPaul Vinciguerra6-6/+15
Type: docs Change-Id: I039ba9ad5385452b202366fba0b367506a21ea4f Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-10-23devices: vhoost cpu->copy array overflow on tcp jumbo frame (65535 bytes)Steven Luong2-2/+8
We reserve 40 slots in cpu->copy array prior to copy out to avoid overflowing the array. However, 40 is not enough for the jumbo frame because desceiptor buffer len is likely at 1536. Change the reserve to 200 and add ASSERT to avoid encountering the same problem in the future. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ibf0c03c4b4f33e781d5be8679ccd6c3a4b4a646d
2019-10-07devices: vhost not reading packets from vringSteven Luong2-0/+25
In a rare event, after the vhost protocol message exchange has finished and the interface had been brought up successfully, the driver MAY still change its mind about the memory regions by sending new memory maps via SET_MEM_TABLE. Upon processing SET_MEM_TABLE, VPP invalidates the old memory regions and the descriptor tables. But it does not re-compute the new descriptor tables based on the new memory maps. Since VPP does not have the descriptor tables, it does not read the packets from the vring. In the normal working case, after SET_MEM_TABLE, the driver follows up with SET_VRING_ADDRESS which VPP computes the descriptor tables. The fix is to stash away the descriptor table addresses from SET_VRING_ADDRESS. Re-compute the new descriptor tables when processing SET_MEM_TABLE if descriptor table addresses are known. Type: fix Ticket: VPP-1784 Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I3361f14c3a0372b8d07943eb6aa4b3a3f10708f9 (cherry picked from commit 61b8ba69f7a9540ed00576504528ce439f0286f5)
2019-09-24vlib: add flag to explicitelly mark nodes which can init per-node packet traceDamjan Marion2-0/+2
Type: feature Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-09-06tap: revert clean-up when linux will delete the tap interfaceMohsin Kazmi1-1/+0
Type: fix Ticket: VPP-1766 revert e4ac48e792f4eebfce296cfde844ee73b1abd62f Change-Id: I03feea4008a47859d570ad8d1d08ff3f30d139ef Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> (cherry picked from commit 623a1b7053424b539a51faf866ab839d3da3f45b)
2019-09-02tap: interface rx counter not increment correctSteven Luong1-1/+1
vlib_increment_combined_counter takes sw_if_index, not hw_if_index. Using hw_if_index may work as long as there is no subinterface created to cause hw_if_index and sw_if_index to differ. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I6db042186eeeacf32250f7ef261af8cd6f5ce56e
2019-08-19devices: skip checksum calculation if guest supports checksum offloadSteven Luong1-3/+7
Set VNET_HW_INTERFACE_FLAG_SUPPORTS_TX_L4_CKSUM_OFFLOAD for the interface to skip checksum calculation if guest supports checksum offload. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ie933c3462394f07580ef7f2bec1d2eb3b075bd0c
2019-08-17gso: fix l3 and l4 header offset in case of tagged interfaceMohsin Kazmi1-0/+14
previously, PG and virtio interfaces calculate wrong l3 and l4 header offset. This patch fixes this issue. Type: fix Ticket: VPP-1739 Change-Id: I5ba978e464babeb65e0711e1027320d46b3b9932 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-08-16devices: vhost-user crashes displaying show trace for deleted interfaceSteven Luong1-6/+10
After the trace is collected and if the interface is then deleted, show trace may crash for the debug image. This is due to the additional check in pool_elt_at_index() to make sure that the block is not free. The fix is to do the check in vhost format trace and return "interface deleted" Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I0744f913ba6146609663443f408d784067880f93
2019-08-16gso: remove the ip checksum flag in case of ipv6Mohsin Kazmi1-1/+0
Type: fix Ticket: VPP-1727 Change-Id: Icfee35c5ab5e1c65079d1ca7bb514162319113e5 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-08-02devices: add null check after map_guest_mem callsSteven Luong1-2/+16
map_guest_mem may return null. Coverity complains about calls without checking its return. Simple stuff. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I0626115f4951a88f23d9792f0232fb57c132fbc2
2019-08-02virtio: add the display information in virtio cliChenmin Sun2-2/+2
Type: fix 1. Add option '[gso-enabled]' in cli 'create interface virtio' 2. Add gso information in virtio_show() Change-Id: I4eb58f4421325ef54a6a68c8341b3a6d3d68136a Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
2019-07-31devices interface tests: vhosst GSO supportSteven Luong7-19/+296
Add gso option in create vhost interface to support gso and checksum offload. Tested with the following startup options in qemu: csum=on,gso=on,guest_csum=on,guest_tso4=on,guest_tso6=on,guest_ufo=on, host_tso4=on,host_tso6=on,host_ufo=on Type: feature Change-Id: I9ba1ee33677a694c4a0dfe66e745b098995902b8 Signed-off-by: Steven Luong <sluong@cisco.com>
2019-07-23api: binary api cleanupDave Barach3-8/+14
Multiple API message handlers call vnet_get_sup_hw_interface(...) without checking the inbound sw_if_index. This can cause a pool_elt_at_index ASSERT in a debug image, and major disorder in a production image. Given that a number of places are coded as follows, add an "api_visible_or_null" variant of vnet_get_sup_hw_interface, which returns NULL given an invalid sw_if_index, or a hidden sw interface: - hw = vnet_get_sup_hw_interface (vnm, sw_if_index); + hw = vnet_get_sup_hw_interface_api_visible_or_null (vnm, sw_if_index); if (hw == NULL || memif_device_class.index != hw->dev_class_index) return clib_error_return (0, "not a memif interface"); Rename two existing xxx_safe functions -> xxx_or_null to make it obvious what they return. Type: fix Change-Id: I29996e8d0768fd9e0c5495bd91ff8bedcf2c5697 Signed-off-by: Dave Barach <dave@barachs.net>
2019-07-23devices: vhost handling VHOST_USER_SET_FEATURESSteven Luong1-0/+1
Some combinations of new qemu (2.11) and old dpdk (16.10) may send VHOST_USER_SET_FEATURES at the end of the protocol exchange which the vhost interface is already declared up and ready. Unfortunately, the process of VHOST_USER_SET_FEATURES will cause the interface to go down. Not sure if it is correct or needed. Because there is no additional messages thereafter, the hardware interface stays down. The fix is to check the interface again at the end of processing VHOST_USER_SET_FEATURES. If it is up and ready, we bring back the hardware interface. Type: fix Change-Id: I490cd03820deacbd8b44d8f2cb38c26349dbe3b2 Signed-off-by: Steven Luong <sluong@cisco.com>
2019-07-18vlib: convert frame_index into real pointersAndreas Schultz1-1/+1
The fast path almost always has to deal with the real pointers. Deriving the frame pointer from a frame_index requires a load of the 32bit frame_index from memory, another 64bit load of the heap base pointer and some calculations. Lets store the full pointer instead and do a single 64bit load only. This helps avoiding problems when the heap is grown and frames are allocated below vm->heap_aligned_base. Type: refactor Change-Id: Ifa6e6e984aafe1e2755bff80f0a4dfcddee3623c Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com> Signed-off-by: Dave Barach <dave@barachs.net>
2019-06-29devices: virtio pci leaking spinlockSteven Luong1-0/+1
Memory is dirt cheap. But there is no need to throw it away. Type: fix Change-Id: I155130ab3c435b1c04d7c0e9f54795b8de9383d9 Signed-off-by: Steven Luong <sluong@cisco.com>
2019-06-20tap: fix the total length of packet for stats byteMohsin Kazmi1-3/+3
Type: fix Fixes: 8389fb9 Change-Id: I31076db78507736631609146d4cca28597aca704 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-06-20tap: add support to configure tap interface host MTU sizeMohsin Kazmi2-0/+4
This patch adds support to configure host mtu size using api, cli or startup.conf. Type: feature Change-Id: I8ab087d82dbe7dedc498825c1a3ea3fcb2cce030 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-05-28tap: crash in multi-thread environmentMohsin Kazmi2-1/+4
In tap tx routine, virtio_interface_tx_inline, there used to be an interface spinlock to ensure packets are processed in an orderly fashion clib_spinlock_lock_if_init (&vif->lockp); When virtio code was introduced in 19.04, that line is changed to clib_spinlock_lock_if_init (&vring->lockp); to accommodate multi-queues. Unfortunately, althrough the spinlock exists in the vring, it was never initialized for tap, only for virtio. As a result, many nasty things can happen when running tap interface in multi-thread environment. Crash is inevitable. The fix is to initialize vring->lockp for tap and remove vif->lockp as it is not used anymore. Change-Id: I82b15d3e9b0fb6add9b9ac49bf602a538946634a Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> (cherry picked from commit c2c89782d34df0dc7197b18b042b4c2464a101ef)
2019-05-27virtio: Add gso support for native virtio driverMohsin Kazmi5-7/+77
Change-Id: I7b735f5a540e8c278bac88245acb3f8c041c49c0 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-05-24Tap: Fix the indirect buffers allocation VPP-1660Mohsin Kazmi4-48/+61
Indirect buffers are used to store indirect descriptors to xmit big packets. This patch moves the indirect buffer allocation from interface creation to device node. Now it allocates or deallocates buffers during tx for chained buffers. Change-Id: I55cec208a2a7432e12fe9254a7f8ef84a9302bd5 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> (cherry picked from commit 55203e745f5e3f1f6c4dbe99d6eab8dee4d13ea6)
2019-05-16init / exit function orderingDave Barach1-6/+6
The vlib init function subsystem now supports a mix of procedural and formally-specified ordering constraints. We should eliminate procedural knowledge wherever possible. The following schemes are *roughly* equivalent: static clib_error_t *init_runs_first (vlib_main_t *vm) { clib_error_t *error; ... do some stuff... if ((error = vlib_call_init_function (init_runs_next))) return error; ... } VLIB_INIT_FUNCTION (init_runs_first); and static clib_error_t *init_runs_first (vlib_main_t *vm) { ... do some stuff... } VLIB_INIT_FUNCTION (init_runs_first) = { .runs_before = VLIB_INITS("init_runs_next"), }; The first form will [most likely] call "init_runs_next" on the spot. The second form means that "init_runs_first" runs before "init_runs_next," possibly much earlier in the sequence. Please DO NOT construct sets of init functions where A before B actually means A *right before* B. It's not necessary - simply combine A and B - and it leads to hugely annoying debugging exercises when trying to switch from ad-hoc procedural ordering constraints to formal ordering constraints. Change-Id: I5e4353503bf43b4acb11a45fb33c79a5ade8426c Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-06virtio: refactor ctrl queue supportMohsin Kazmi1-22/+32
Change-Id: Ifb16351f39e5eb2cd154e70a1c96243e4842e80d Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-05-01virtio: Fix virtio buffer allocationMohsin Kazmi1-1/+1
Change-Id: I0ffb468aef56f5fd223218a83425771595863666 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-05-01virtio: remove configurable queue size supportMohsin Kazmi5-41/+27
Native virtio device through legacy driver can't support configurable queue size. Change-Id: I76c446a071bef8a469873010325d830586aa84bd Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-04-25tap: Fix the indirect buffer allocationMohsin Kazmi1-1/+1
Change-Id: I73f76c25754f6fb14a49ae47b6404f3cbabbeeb5 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-04-17tap: clean-up when linux will delete the tap interfaceMohsin Kazmi1-0/+1
When container is deleted which has tap interface attached, Linux also delete the tap interface leaving the VPP side of tap. This patch does a clean up job to remove that VPP side of tap interface. To produce the behavior: In VPP: create tap On linux: sudo ip netns add ns1 sudo ip link set dev tap0 netns ns1 sudo ip netns del ns1 Change-Id: Iaed1700073a9dc64e626c1d0c449f466c143f3ae Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-04-10API: Fix shared memory only action handlers.Ole Troan2-47/+0
Some API action handlers called vl_msg_ai_send_shmem() directly. That breaks Unix domain socket API transport. A couple (bond / vhost) also tried to send a sw_interface_event directly, but did not send the message to all that had registred interest. That scheme never worked correctly. Refactored and improved the interface event code. Change-Id: Idb90edfd8703c6ae593b36b4eeb4d3ed7da5c808 Signed-off-by: Ole Troan <ot@cisco.com>
2019-04-08fixing typosJim Thompson1-1/+1
Change-Id: I215e1e0208a073db80ec6f87695d734cf40fabe3 Signed-off-by: Jim Thompson <jim@netgate.com>
2019-04-08virtio: Fix the coverity warningsMohsin Kazmi1-6/+11
Change-Id: I7c6e4bf2abf08193e54a736510c07eeacd6aebe7 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-04-03virtio: Add support for multiqueueMohsin Kazmi6-76/+466
Change-Id: Id71ffa77e977651f219ac09d1feef334851209e1 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-03-15Revert "API: Cleanup APIs interface.api"Ole Trøan2-2/+4
This reverts commit e63325e3ca03c847963863446345e6c80a2c0cfd. Allow time for CSIT to accommodate. Change-Id: I59435e4ab5e05e36a2796c3bf44889b5d4823cc2 Signed-off-by: ot@cisco.com
2019-03-15API: Cleanup APIs interface.apiJakub Grajciar2-4/+2
Use of consistent API types for interface.api Change-Id: Ieb54cebb4ac96b432a3f0b41596718aa2f34885b Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-03-13vhost-user: restart vpp may cause vhost to crashSteven Luong1-1/+1
Fix a typo in vhost_user_rx_discard_packet which may cause txvq->last_avail_idx to go wild. Change-Id: Ifaeb58835dff9b7ea82c061442722f1dcaa5d9a4 Signed-off-by: Steven Luong <sluong@cisco.com> (cherry picked from commit 39382976701926c1f34191c1311829c15a53cb01)
2019-03-13deprecate VLIB_DEVICE_TX_FUNCTION_MULTIARCHFilip Tehlar1-7/+7
Change-Id: I8819bcb9e228e7a432f4a7b67b6107f984927cd4 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-04devices: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar1-6/+3
Change-Id: I911fb3f1c6351b37580c5dbde6939a549431a92d Signed-off-by: Filip Tehlar <ftehlar@cisco.com>