| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It is much cheaper to use ctzll than to do shift,subtract and mask
in likely case when we are looking for 1st set bit in the uword.
Change-Id: I31954081571978878c7098bafad0c85a91755fa2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
show vhost-user <interface> may cause a crash if interface is semi-bogus.
Semi-bogus means it is a known vpp interface which has a hw_if_index, but
it is bogus because it is not a vhost-user interface.
The fix is to add a check to reject non vhost-user interface for the
command.
Change-Id: I63f1e8bfbf46f5ec4c30f9fb3546982b63cd7cc5
Signed-off-by: Steven <sluong@cisco.com>
|
|
interface)"
This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa.
Reverting as this patch is causing following crash:
0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails
Aborted
Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
virtio_free_rx_buffers uses the wrong slot in the vring to get
the buffer index. It uses desc_next. It should be last_used_idx
which is the slot number for the first valid descriptor.
Change-Id: I6b62b794f06869fbffffce45430b8b2e37b1266c
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I373f429c53c6f66ad38322addcfaccddb7761392
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib04a8787038fb536470a04d99fdc165102edfb5a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
In the case that vhostuser server accepted more than one client connection,
'vui->clib_file_index' will be overwritten directly without release the possible
existed resource, so file descriptor leak occurs
Change-Id: I89d08133dae31a12a815df2631334dbf0aefeb1e
Signed-off-by: Haiyang Tan <haiyang.tan.dev@gmail.com>
|
|
(VPP-1085)
The NEON implementation searches particular address in
VHOST_MEMORY_MAX_NREGIONS regions. Searching two regions at a
time.
Change-Id: Icc3c6746bc98e3a1fa71424e51b64f62efbfdc74
Signed-off-by: Nitin Saxena <nitin.saxena@cavium.com>
|
|
This patch teaches worer threads to sleep and to be waken up by
kernel if there is activity on file desctiptors assigned to that thread.
It also adds counters to epoll file descriptors and new
debug cli 'show unix file'.
Change-Id: Iaf67869f4aa88ff5b0a08982e1c08474013107c4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
1. Replace the magic number '-1' with MAP_FAILED
2. On x86 platform, QEMU uses vhostuser required the memory back-end is file based,
the file could be tmpfs(4K page size) or hugetlbfs(2M or 1G page size)
Change-Id: If1818cb6833728d641f68e4d4a3bc645e70f2ee6
Signed-off-by: Haiyang Tan <haiyang.tan.dev@gmail.com>
|
|
Add an SELinux profile such that VPP can run under SELinux on RPM based
platforms. The SELinux Policy is currently only implemented for RPM
packages, specifically, Fedora, CentOS and RHEL. Doxygen User
Documentation has been included (selinux_doc.md). Once some discussion
on file locations has completed (see vpp-devlist), updates to the Debug
CLI documentation will also need to be updated.
Additional changes:
Patch Set 2:
- Rework selinux_doc.md such that each line is only 80 characters
instead of each sentence on a line. Made additonal minor chnages
to the text.
- Update vHost Debug CLI documentation to reflex new socket location.
Cleaned up some text from when I originally wrote it, to better
reflex proper use.
- Update exec Debug CLI documentation to be more inline with suggested
helptext, added text regarding recommended script file location.
- For Debian builds, create the /var/log/vpp/ directory. I don't use
Debian very much, so please pay extra attention to
build-data/platforms.mk and build-root/deb/debian/.gitignore.
- Per discussion on VPP call, changed the default log location to
/var/log/vpp/vpp.log.
- Changed the socket location for vHost in AutoConfig to
/var/run/vpp/.
Patch Set 3:
- Update selinux_doc.md based on comments.
Change-Id: I400520dc33f1ca51012d09ef8fe5a7b7b96c631e
Signed-off-by: Billy McFall <bmcfall@redhat.com>
|
|
This is a version of the VPP API generator in Python PLY. It supports
the existing language, and has a plugin architecture for generators.
Currently C and JSON are supported.
Changes:
- vl_api_version to option version = "major.minor.patch"
- enum support
- Added error checking and reporting
- import support (removed the C pre-processor)
- services (tying request/reply together)
Version:
option version = "1.0.0";
Enum:
enum colours {
RED,
BLUE = 50,
};
define foo {
vl_api_colours_t colours;
};
Services:
service {
rpc foo returns foo_reply;
rpc foo_dump returns stream foo_details;
rpc want_stats returns want_stats_reply
events ip4_counters, ip6_counters;
};
Future planned features:
- unions
- bool, text
- array support (including length)
- proto3 output plugin
- Refactor C/C++ generator as a plugin
- Refactor Java generator as a plugin
Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
address area
This patch fixed the VMA leak that if mapping one of guest physical address area get failed.
Change-Id: I07b0b9a932209561d6ff2b2dd08a111ea5db2209
Signed-off-by: Haiyang Tan <haiyang.tan.dev@gmail.com>
|
|
Change-Id: I4e2804754b443f5f41fb25eed8334908c4a70f84
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Buffers may be allocated for indirect descriptors by tx thread and
they are freed when tx thread is invoked in the next invocation.
This is to allow the recipient (kernel) to have a chance to process
them. But if the tap interface is deleted, the tx thread may not yet
be called to clean up the indirect descriptors' buffers. In that case,
we need to remove them without waiting for the tx thread to be called.
Failure to do so may cause buffers leak when the tap interface is deleted.
For the RX ring, leakage also exists for vring->buffers when the interface
is removed.
Change-Id: I3df313a0e60334776b19daf51a9f5bf20dfdc489
Signed-off-by: Steven <sluong@cisco.com>
(cherry picked from commit d8a998e74b815dd3725dfcd80080e4e540940236)
|
|
This does not update api client code. In other words, if the client
assumes the transport is shmem based, this patch does not change that.
Furthermore, code that checks queue size, for tail dropping, is not
updated.
Done for the following apis:
Plugins
- acl
- gtpu
- memif
- nat
- pppoe
VNET
- bfd
- bier
- tapv2
- vhost user
- dhcp
- flow
- geneve
- ip
- punt
- ipsec/ipsec-gre
- l2
- l2tp
- lisp-cp/one-cp
- lisp-gpe
- map
- mpls
- policer
- session
- span
- udp
- tap
- vxlan/vxlan-gpe
- interface
VPP
- api/api.c
OAM
- oam_api.c
Stats
- stats.c
Change-Id: I0e33ecefb2bdab0295698c0add948068a5a83345
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- separate client/server code for both memory and socket apis
- separate memory api code from generic vlib api code
- move unix_shared_memory_fifo to svm and rename to svm_fifo_t
- overall declutter
Change-Id: I90cdd98ff74d0787d58825b914b0f1eafcfa4dc2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I097a738b96a304621520f1842dcac7dbf61a8e3f
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
- change interface naming scheme
- rework netlink code
- add option to set link address, namespace
Change-Id: Icf667babb3077a07617b0b87c45c957e345cb4d1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
virtio backend stays in vnet/devices/virtio
Change-Id: Idbf04f1c645a809ed408670ba330662859fe9309
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
fd is not close when IOCTL encounters an error which causes resource
leak. The fix is to initialize fd to -1. At return, close fd if
it has a valid value.
Change-Id: I53c4f5c71ca0f556fb6586f5849e7cb622632d8f
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I877cf1abb062a90f428c3ec0cab5c6e9dad0ca82
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- add support for assigning tap interface to the bridge
- add support for assigning tap interface host side ip4 and ip6 address
- host namespace can be specified as PID (pid:12345) or full path to file
- automatically bring linux interface up
Change-Id: I1cf7c3cad9a740e430cc1b9c2bb0aad0ba4cc8d8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix 3 coverity warnings
1. api_format.c: init net_ns = 0 and remove its corresponding vec_add and
vec_free
2. netlink.c (reported in tap.c before the code was removed): resource leaked
due to fd is not close
3. tap.c: subtract 1 for size when calling strncpy to accommodate the
terminated NULL character
Change-Id: Iff4e66604862f0c06dac227b8cfd48d3979e41a5
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: Ib091875f77ea99421aec0947fd17833c4e6d2ec2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ided667356d5c6fb9648eb34685aabd6b16a598b7
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
With heavy traffic, tx code path may crash due to memory corruption
Thread 5 "vpp_wk_2" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fff3995c700 (LWP 2505)]
0x00007ffff73675e8 in vhost_user_if_input (vm=0x7fffb5f5bf9c,
vum=0x7ffff7882a40 <vhost_user_main>, vui=0x7fffb65570c4, qid=0,
node=0x7fffb6577dac, mode=VNET_HW_INTERFACE_RX_MODE_POLLING)
at /home/sluong/vpp-master/vpp/build-data/../src/vnet/devices/virtio/vhost-user.c:1610
1610 bi_current = (vum->cpus[thread_index].rx_buffers)
[vum->cpus[thread_index].rx_buffers_len];
(gdb) p vum->cpus[thread_index].rx_buffers_len
$2 = 793212607
(gdb)
Apparently, some code accidentally wrote the bad value in rx_buffers_len.
rx_buffers_len should never be greater than 1024 since that is how many buffers
we request each time.
After debugging many hours, I discovered that the memory corruption happens
in the tx code path right here on line 2176.
{
vhost_copy_t *cpy = &vum->cpus[thread_index].copy[copy_len];
copy_len++;
cpy->len = bytes_left;
cpy->len = (cpy->len > buffer_len) ? buffer_len : cpy->len;
cpy->dst = buffer_map_addr;
cpy->src = (uword) vlib_buffer_get_current (current_b0) +
current_b0->current_length - bytes_left;
(gdb) p cpy
$3 = (vhost_copy_t *) 0x7fffb554077c
(gdb) p copy_len
$4 = 1025
(gdb) p &vum->cpus[3].rx_buffers_len
$8 = (u32 *) 0x7fffb5540784
copy_len is picking up the index entry 1024 before it was incremented. copy array has only
1024 members (0 - 1023 are valid).
The assignment here in cpy surely causes memory corruption. It is only discovered later
when the memory location that it corrupted is used.
The condition for the crash is to transmit jumbo frames under heavy volume. Since ring
size is 1024, with one packet taking up one index for frame size (less 2048), it does
not cause overflow. With jumbo frames, it requires multiple indices for one packet,
it can cause the overflow under heavy traffic.
The fix is to do copy out when we have 1000 entries in the array to avoid
overflow.
Change-Id: Iefbc739b8e80470f1cf13123113f8331ffcd0eb2
Signed-off-by: Steven <sluong@cisco.com>
|
|
Add one of these statements to foo.api:
vl_api_version 1.2.3
to generate a version tuple stanza in foo.api.h:
/****** Version tuple *****/
vl_api_version_tuple(foo, 1, 2, 3)
Change-Id: Ic514439e4677999daa8463a94f948f76b132ff15
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
A bug was reported where a jumbo packet would stay in vhost
queue forever or until a large enough number of other packets
arrived in the queue too.
This is due to a bug in vhost input node buffer allocation.
The fix is to make sure that vhost always allocates at least
enough buffers for one single big packet. '40' is used to
account for 65kB frames.
Change-Id: I1d293028854165083e30cd798fab9d4140230b78
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
(cherry picked from commit 67700d41169ac37d21c400949a316750eabad969)
|
|
- always use 'va_args' as pointer in all format_* functions
- u32 for all 'indent' params as it's declaration was inconsistent
Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79
Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
|
|
When changing the admin state of a vhost-user interface, do not put it
in link-up mode if the interface is not actually ready.
Change-Id: Idbc631a7126efa79d199909f9e7656d21bd412ca
Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
|
|
This will allow us to use this code in client libraries without vlib.
Change-Id: I8557b752496841ba588aa36b6082cbe2cd1867fe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
According to the spec, supporting interrupt mode from the driver is optional,
not a must. When interrupt mode is configured on the interface, we should
check to make sure that the driver didn't opt out for the kickfd support and
reject the configuration if it did.
Change-Id: I7d3dbaddde65458e1a6a802754a3768ae8685a0e
Signed-off-by: Steven <sluong@cisco.com>
|
|
In the data path, we grab qsz from vhost_user_vring_t to compute
qsz_mask and store it in a stack variable to use on many occasions.
We never use qsz for any meaningful purpose. It is more useful to
cache qsz_mask in vhost_user_vring_t to avoid the needless computation
in the data path.
Change-Id: Idf4d94a9754d5c75c899f1f4f59602275b9904a6
Signed-off-by: Steven <sluong@cisco.com>
|
|
create/delete/modify vhost_user APIs no longer support the operation mode
(polling/interrupt/adaptive). They are now done via the generic interface.
Change-Id: I9e9bd503f9b56c953ecd2b271b3e2007da20c72a
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I0124fa264f7f390fc7cd9722da59be03116831c5
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I06a10a4291e61aec3f1396d2514ed6fe3901897a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
(VPP-916)
The syntax for debug vhost-user is
debug vhost-user <on | off>
However, currently the code does not reject the invalid command such as below
debug vhost-user
debug vhost-user on blah
debug vhost-user off blah
The fix is to enforece the correct syntax and reject the command when invalid
option is entered.
Change-Id: I1a04ae8ddb6dd299aa6d15b043362964e685ddde
Signed-off-by: Steven <sluong@cisco.com>
(cherry picked from commit 6a4de2764d9e6cadf36af824dddb3f33c2d6dc7e)
|
|
Add runtime debug vhost-user on | off CLI to facilitate troubleshooting.
This feature is needed to avoid recompiling the code to debug vhost issues.
The debugging messages should not be on the data path to avoid performance
hit.
Change-Id: I4c40f65dbb222557cba3fb8706fa3b7b62eec95f
Signed-off-by: Steven <sluong@cisco.com>
|
|
and add adaptive mode support to receive queue
- Migrate vhost to use device infra which does the interface/queue to worker
thread assignment.
- Retire vhost thread CLI and corresponding code which assigns interface/queue
to worker thread. set interface placement should be used instead to customize
the interface/queue to worker thread assignment.
- Retire vhost interrupt/polling option when creating vhost-user interface.
Instead, set interface rx-mode should be used.
- Add code in vnet_device_input_unassign_thread to change the node state
to interrupt if the last polling interface has left the worker thread for the
device of the corresponding interface/queue.
- Add adaptive mode support. The node state is set to interrupt initially.
When the scheduler detects a burst of traffic, it switches the input node to
polling. Then we inform the device that we don't need interrupt notification.
When the traffic subsides, the scheduler switches the input node back to
interrupt. Then we immediately tell the driver that we want interrupt
notification again.
- Remove some duplicate code in vlib/main.c
Change-Id: Id19bb1b9e50e6521c6464f470f5825c26924d3a8
Signed-off-by: Steven <sluong@cisco.com>
|
|
When processing a vring descriptor which is outside of mmap, we disable
the interface and spit a message to shut/no shut the interface. This is
not practical as application using vhost cannot constantly checking the
logs and do the recovery. The proposed fix is to log an error, like
other errors that we encounter.
The other bug is buffer leak in the function rewind. At the end of the
while loop when b_current != b_head, we still have to give back 1 more
buffer or add 1 to rx_buffers_len.
Change-Id: I68c0b24f070e644cd8878f42272a7b518f14393f
Signed-off-by: Steven <sluong@cisco.com>
|
|
When the descriptor is chained via multiple parts, vhost is supposed
to reassemble the different parts to form a packet prior to passing
the packet to the next input node. However, bad packet was seen, having
bad ethertype, source, and destination mac addresses.
The problem was due to the destination pointer not being incremented as
each chain is processed. THe result was the first chain is copied to the
beginning of the buffer, the next chain is copied, then the last chain
is also copied to the beginning of the buffer. As a result, the ethertype,
source and destination mac, etc, are being overwritten by the very last
chain of the descriptor.
Change-Id: I78f9a91de68c85574047912576dcc311d7597e21
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I9664214652229b663c3e3ba7406b4ede96bfb123
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
When creating or modifying a vhost interface, verify if the path name
already existed and reject the command.
Change-Id: I8b2d33b77c847f774492874f7d194fa72c488479
Signed-off-by: Steven <sluong@cisco.com>
|
|
I had a bug where a requested size of 1G was resulting in
an aligned size of '1G + 2M', resulting in an OOM error.
Previous code was adding one huge page size
when memory is already aligned.
Change-Id: Idd3aa0e9b893fb3efccba6ae1c7161e26d3f9456
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
Patch 6347 removed the socket file when the interface is deleted and
when VPP process is exitting. The CLI for deleting the interface has
builtin vlib_worker_thread_barrier_sync to prevent the worker
threads from running. Unfortunately, the CLI quit does not have the
builtin vlib_worker_thread_barrier_sync. As a result, it may cause the
worker thread to crash.
The fix is to add the vlib_worker_thread_barrier_sync in vhost_user_exit.
Change-Id: I1eff81170e131098f1799662f0ab48d6fca3def7
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I72298aaae7d172082ece3a8edea4217c11b28d79
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- Unlink the file created for the socket when deleting vhost interface
if we are the server mode.
- Remove all vhost interfaces when VPP process is exitting.
Change-Id: Id9b676cd027bbd67b473bbd01901d1ecc4d8e6cb
Signed-off-by: Steven <sluong@cisco.com>
|
|
- Add cpu index to the vring structure for quick lookup
- Reduce the code that needs to be protected by
vlib_worker_thread_barrier_sync
- Set minimum timer no less than 1 ms
Change-Id: Iafef4bf6879a8efb350abf4e0f517e38f7ff7a8b
Signed-off-by: Steven <sluong@cisco.com>
|
Damjan Marion
Steven
Ole Troan
Haiyang Tan
Nitin Saxena
Billy McFall
Florin Coras
Milan Lenco
Dave Barach
Pierre Pfister
Christophe Fontaine
Yoann Desmouceaux
Neale Ranns
Neale Ranns