aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/devices/virtio
AgeCommit message (Collapse)AuthorFilesLines
2020-04-17virtio: fix to use chained descriptors when missing indirect descriptorMohsin Kazmi2-7/+79
Some vhost-backed missing the VIRTIO_RING_F_INDIRECT_DESC feature. Previously, vpp doesn't support jumbo frames using chained descriptors. This patch fixes this issue. Type: fix Change-Id: I20487e201e88ea136b556ac84dde058019ab3e78 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-04-17tap: add initial support for tunMohsin Kazmi5-25/+72
Type: feature Change-Id: I699a01ac925fe5c475a36032edb7018618bb4dd4 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-04-10virtio: fix gso and csum offload errors handlingMohsin Kazmi1-45/+82
GSO and CSUM offloaded packets are transmitted even itf doesn't support GSO/CSUM. This patch fixes it by logging the respective errors and dropping the packets. Type: fix Change-Id: I5ab19d15ce6aa9fda515313c313a5a56c0b96837 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-04-08virtio: fix the tcp/udp checksum offloadsMohsin Kazmi2-28/+0
Some vhost-backend calculates the wrong checksum in case of tcp/udp offload when driver resets tcp/udp checksum field to '0'. Type: fix Change-Id: I1d2a9b95b3d5cc1decac38027104a04df2af4680 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-03-31vlib: move pci api types from vnet/pci to vlib/pciJakub Grajciar2-2/+2
Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I1a60809a8bbbbb8ac8b65ab990d51aae1229647f Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-03-30gso: fix the header parser to read onlyMohsin Kazmi2-4/+44
Previously, header parser sets the tcp/udp checksum to 0. It should be read only function for vlib_buffer_t. Type: fix Change-Id: I9c3398372f22998da3df188f0b7db13748303068 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-03-23virtio: vhost gso checksum error when both indirect and mrg_rxbuf are offSteven Luong1-20/+19
Turn on gso, turn off both indirect and mrg_rxbuf caused traffic received and sent with checksum error. The problem is we are not mapping the hdr correctly in the shared memory address. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I7ef3bc2755544167b0e624365988111b17399e89
2020-03-23virtio: improve error handlingMohsin Kazmi1-9/+30
Type: improvement Change-Id: I134465760272ceb29f85486cba838d8687696bbf Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-03-21virtio: fix link up/down flagMohsin Kazmi1-3/+9
Type: fix "set int state <interface> down" puts the virtio device link down. It will not put the link in "UP" state, when "set int state <interface up>" will be used again to change the interface admin up. This patch fixes it. To test: create tap set int state tap0 up set int state tap0 down sh hardware sh int set int state tap0 up sh int sh hardware Change-Id: I3c0e31539f8a2a1e40220e7fb57eedecf408f067 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-03-21virtio: fix the out of order descriptors in txMohsin Kazmi4-8/+102
Type: fix Some vhost-backends give used descriptors back in out-of-order. This patch fixes the native virtio to handle out-of-order descriptors. Change-Id: I57323303349f6a385e412ee22772ab979ae8edbf Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-03-02virtio: fix the coverity warningMohsin Kazmi1-4/+1
Type: fix Change-Id: Ia75edb74eb7c746dd4c66bdbff75efb949575ce4 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-02-04virtio: update FEATURE.yaml to include description for vhost-userSteven Luong1-3/+7
Add features supported by vhost-user Type: docs Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Iba4c5244c40324b603e2803ade8ecc0816326de8
2020-02-03virtio: vhost gso is broken in some topologySteven Luong1-2/+8
Recent modification added a call to vnet_gso_header_offset_parser in the beginning of vhost_user_handle_tx_offload. The former routine may set tcp or udp->checksum to 0. While it is appropriate to set it to 0 for the GSO packet, it is broken and causes checksum error if the aformentiooned routine is called by a non-GSO packet. The fix is to not call vhost_user_handle_tx_offload if the buffer does not indicate checksum offload is needed. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I6e699d7a40b7887ff149cd8f77e8f0fa9374ef19
2020-01-30tap: fix the host mac addressMohsin Kazmi1-0/+2
Tap configuration code sets the host mac address two time. This patch fixes it. Type: fix Change-Id: I7bebb9b7f25352a8a9a98bae6a0636757c0cea9c Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-01-27devices: vhost: fix data offset on inputBenoît Ganne1-11/+1
Regardless of whether the virtio_net_hdr is sent as a separate descriptors or in the same descriptor as the data, we always want to skip the header length - maybe moving to the next descriptor along the way. Type: fix Change-Id: Iaa70aeb310e589639b20f8c7029aaa8d3ce5d307 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-01-08virtio: fix ip4 checksum offloadMohsin Kazmi1-2/+14
Type: fix Change-Id: I08747ac308e5c1768a3a6aa5f83a016dc0274a1c Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-01-08tap: split gso and checksum offload functionalityMohsin Kazmi1-2/+1
Type: refactor Change-Id: I0d4b79ef384c11c841576d264bfd8ccb21783e10 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-01-08virtio: split gso and checksum offload functionalityMohsin Kazmi9-44/+312
Type: refactor Change-Id: I897e36bd5db593b417c2bac9f739bc51cf45bc08 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-01-03devices: virtio API cleanupJakub Grajciar2-16/+21
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I38a409af770c88c1eb2c68b24abef2a5a91e1b9a
2020-01-02virtio: fix checksum offload supportBenoît Ganne1-10/+21
Checksum offload and GSO are independent. We must support checksum offload if it has been negotiated, independently of GSO. Ticket: VPPSUPP-47 Type: fix Change-Id: I8cb6dd58b61714ebb2726eb4aab0d74d49fdab99 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-12-17virtio: fix the tx queue thread bindingMohsin Kazmi1-3/+17
Type: fix Change-Id: Ibbe7e20aebc9153ceba07e048dc0eaa45193f4ea Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-12-11devices: vhost API cleanupJakub Grajciar5-26/+171
Use consistent API types. Type: fix Change-Id: I2dec594cb834a45004edc9ca58ad7c7b4bd7ff06 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-12-10api: multiple connections per processDave Barach2-2/+2
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
2019-12-06gso: fix the tap/virtio driver for header offsetMohsin Kazmi1-1/+25
Type: fix Change-Id: Ied34466907fa8ad44f997c600dbf481be4d22027 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-12-05gso: add protocol header parserMohsin Kazmi1-33/+10
Type: feature Change-Id: I7c6be2b96d19f82be237f6159944f3164ea512d0 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-12-04gso: remove the interface countMohsin Kazmi3-10/+1
Type: refactor Change-Id: I51405b9d09fb6fb03d08569369fdd4e11c647908 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-11-20tap: multiqueue supportDamjan Marion2-38/+15
Type: feature Change-Id: I7dcc8c6911d02729b3bda1b3a21a211c82c3b949 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-11-20virtio: fix use-after-freeBenoît Ganne1-1/+1
Type: fix Change-Id: Ic67d9da65d937f56ecf994a5504c6351624b32ff Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-11-14virtio: refactor virtio-pci loggingDamjan Marion7-96/+143
Type: refactor Change-Id: I34306c1206b2bf5f521be6c6b78074ccf9259a08 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-11-13virtio: feature arc have higher priority than redirectDamjan Marion1-3/+4
Type: fix Fixes: 8389fb9 Change-Id: Ie159eb444b28b36a7af86049b80fba4e49be93cb Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-11-12virtio: remove unused codeDamjan Marion1-4/+0
Type: refactor Change-Id: I25f1cc3969c6a6ec1384079dc437537acd2ec152 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-11-06build: add yaml file linting to make checkstylePaul Vinciguerra1-1/+3
Type: feature fts and trex rely on yaml config files. Verify that they are valid, so comitters can catch errors early. Change-Id: Ide0bb276659119c59bdbbc8b8155e37562a648b8 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-10-30docs: devices-- add FEATURES.yamlPaul Vinciguerra6-6/+15
Type: docs Change-Id: I039ba9ad5385452b202366fba0b367506a21ea4f Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-10-23devices: vhoost cpu->copy array overflow on tcp jumbo frame (65535 bytes)Steven Luong2-2/+8
We reserve 40 slots in cpu->copy array prior to copy out to avoid overflowing the array. However, 40 is not enough for the jumbo frame because desceiptor buffer len is likely at 1536. Change the reserve to 200 and add ASSERT to avoid encountering the same problem in the future. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ibf0c03c4b4f33e781d5be8679ccd6c3a4b4a646d
2019-10-07devices: vhost not reading packets from vringSteven Luong2-0/+25
In a rare event, after the vhost protocol message exchange has finished and the interface had been brought up successfully, the driver MAY still change its mind about the memory regions by sending new memory maps via SET_MEM_TABLE. Upon processing SET_MEM_TABLE, VPP invalidates the old memory regions and the descriptor tables. But it does not re-compute the new descriptor tables based on the new memory maps. Since VPP does not have the descriptor tables, it does not read the packets from the vring. In the normal working case, after SET_MEM_TABLE, the driver follows up with SET_VRING_ADDRESS which VPP computes the descriptor tables. The fix is to stash away the descriptor table addresses from SET_VRING_ADDRESS. Re-compute the new descriptor tables when processing SET_MEM_TABLE if descriptor table addresses are known. Type: fix Ticket: VPP-1784 Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I3361f14c3a0372b8d07943eb6aa4b3a3f10708f9 (cherry picked from commit 61b8ba69f7a9540ed00576504528ce439f0286f5)
2019-09-24vlib: add flag to explicitelly mark nodes which can init per-node packet traceDamjan Marion2-0/+2
Type: feature Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-09-06tap: revert clean-up when linux will delete the tap interfaceMohsin Kazmi1-1/+0
Type: fix Ticket: VPP-1766 revert e4ac48e792f4eebfce296cfde844ee73b1abd62f Change-Id: I03feea4008a47859d570ad8d1d08ff3f30d139ef Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> (cherry picked from commit 623a1b7053424b539a51faf866ab839d3da3f45b)
2019-09-02tap: interface rx counter not increment correctSteven Luong1-1/+1
vlib_increment_combined_counter takes sw_if_index, not hw_if_index. Using hw_if_index may work as long as there is no subinterface created to cause hw_if_index and sw_if_index to differ. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I6db042186eeeacf32250f7ef261af8cd6f5ce56e
2019-08-19devices: skip checksum calculation if guest supports checksum offloadSteven Luong1-3/+7
Set VNET_HW_INTERFACE_FLAG_SUPPORTS_TX_L4_CKSUM_OFFLOAD for the interface to skip checksum calculation if guest supports checksum offload. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ie933c3462394f07580ef7f2bec1d2eb3b075bd0c
2019-08-17gso: fix l3 and l4 header offset in case of tagged interfaceMohsin Kazmi1-0/+14
previously, PG and virtio interfaces calculate wrong l3 and l4 header offset. This patch fixes this issue. Type: fix Ticket: VPP-1739 Change-Id: I5ba978e464babeb65e0711e1027320d46b3b9932 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-08-16devices: vhost-user crashes displaying show trace for deleted interfaceSteven Luong1-6/+10
After the trace is collected and if the interface is then deleted, show trace may crash for the debug image. This is due to the additional check in pool_elt_at_index() to make sure that the block is not free. The fix is to do the check in vhost format trace and return "interface deleted" Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I0744f913ba6146609663443f408d784067880f93
2019-08-16gso: remove the ip checksum flag in case of ipv6Mohsin Kazmi1-1/+0
Type: fix Ticket: VPP-1727 Change-Id: Icfee35c5ab5e1c65079d1ca7bb514162319113e5 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-08-02devices: add null check after map_guest_mem callsSteven Luong1-2/+16
map_guest_mem may return null. Coverity complains about calls without checking its return. Simple stuff. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I0626115f4951a88f23d9792f0232fb57c132fbc2
2019-08-02virtio: add the display information in virtio cliChenmin Sun2-2/+2
Type: fix 1. Add option '[gso-enabled]' in cli 'create interface virtio' 2. Add gso information in virtio_show() Change-Id: I4eb58f4421325ef54a6a68c8341b3a6d3d68136a Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
2019-07-31devices interface tests: vhosst GSO supportSteven Luong7-19/+296
Add gso option in create vhost interface to support gso and checksum offload. Tested with the following startup options in qemu: csum=on,gso=on,guest_csum=on,guest_tso4=on,guest_tso6=on,guest_ufo=on, host_tso4=on,host_tso6=on,host_ufo=on Type: feature Change-Id: I9ba1ee33677a694c4a0dfe66e745b098995902b8 Signed-off-by: Steven Luong <sluong@cisco.com>
2019-07-23api: binary api cleanupDave Barach3-8/+14
Multiple API message handlers call vnet_get_sup_hw_interface(...) without checking the inbound sw_if_index. This can cause a pool_elt_at_index ASSERT in a debug image, and major disorder in a production image. Given that a number of places are coded as follows, add an "api_visible_or_null" variant of vnet_get_sup_hw_interface, which returns NULL given an invalid sw_if_index, or a hidden sw interface: - hw = vnet_get_sup_hw_interface (vnm, sw_if_index); + hw = vnet_get_sup_hw_interface_api_visible_or_null (vnm, sw_if_index); if (hw == NULL || memif_device_class.index != hw->dev_class_index) return clib_error_return (0, "not a memif interface"); Rename two existing xxx_safe functions -> xxx_or_null to make it obvious what they return. Type: fix Change-Id: I29996e8d0768fd9e0c5495bd91ff8bedcf2c5697 Signed-off-by: Dave Barach <dave@barachs.net>
2019-07-23devices: vhost handling VHOST_USER_SET_FEATURESSteven Luong1-0/+1
Some combinations of new qemu (2.11) and old dpdk (16.10) may send VHOST_USER_SET_FEATURES at the end of the protocol exchange which the vhost interface is already declared up and ready. Unfortunately, the process of VHOST_USER_SET_FEATURES will cause the interface to go down. Not sure if it is correct or needed. Because there is no additional messages thereafter, the hardware interface stays down. The fix is to check the interface again at the end of processing VHOST_USER_SET_FEATURES. If it is up and ready, we bring back the hardware interface. Type: fix Change-Id: I490cd03820deacbd8b44d8f2cb38c26349dbe3b2 Signed-off-by: Steven Luong <sluong@cisco.com>
2019-07-18vlib: convert frame_index into real pointersAndreas Schultz1-1/+1
The fast path almost always has to deal with the real pointers. Deriving the frame pointer from a frame_index requires a load of the 32bit frame_index from memory, another 64bit load of the heap base pointer and some calculations. Lets store the full pointer instead and do a single 64bit load only. This helps avoiding problems when the heap is grown and frames are allocated below vm->heap_aligned_base. Type: refactor Change-Id: Ifa6e6e984aafe1e2755bff80f0a4dfcddee3623c Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com> Signed-off-by: Dave Barach <dave@barachs.net>
2019-06-29devices: virtio pci leaking spinlockSteven Luong1-0/+1
Memory is dirt cheap. But there is no need to throw it away. Type: fix Change-Id: I155130ab3c435b1c04d7c0e9f54795b8de9383d9 Signed-off-by: Steven Luong <sluong@cisco.com>
2019-06-20tap: fix the total length of packet for stats byteMohsin Kazmi1-3/+3
Type: fix Fixes: 8389fb9 Change-Id: I31076db78507736631609146d4cca28597aca704 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>