aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/devices
AgeCommit message (Collapse)AuthorFilesLines
2017-04-11Devices: set interface placement does not remove the old interface placementSteven1-3/+0
The command set interface placement is supposed to remove the existing interface placement and add a new interface placement based on the given options. My quick test for the CLI shows that the old interface placement continues to exist. But the new interface placement is also added. The bug exists in vnet_device_input_unassign_thread which checks the old thread index is the same as the passed thread index and skips the deletion if they are the same. The fix is to remove the check which is not supposed to be there. Change-Id: Ib055721fad47513949a03b3cb6dc292bd19fd1e8 Signed-off-by: Steven <sluong@cisco.com>
2017-04-11vhost: interrupt mode enhancementsSteven2-34/+26
- Add cpu index to the vring structure for quick lookup - Reduce the code that needs to be protected by vlib_worker_thread_barrier_sync - Set minimum timer no less than 1 ms Change-Id: Iafef4bf6879a8efb350abf4e0f517e38f7ff7a8b Signed-off-by: Steven <sluong@cisco.com>
2017-04-10Common device-input interrupt infraDamjan Marion4-29/+175
Change-Id: I23b588eb56a3f5690158449a1f9bc8053cd3d251 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-07MPLS McastNeale Ranns1-1/+1
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-06Use thread local storage for thread indexDamjan Marion6-126/+130
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-30vppinfra: add spinlock inline functionsDamjan Marion6-26/+12
Change-Id: I86089e9bb604adfc260a111685001be1c897ce53 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-29vhost: vhost-user component may become unusable with too many open files ↵Steven1-9/+20
(VPP-668) When the number of open files is reached in the system, vhost may encounter a failure in socket call and return from vhost-user-process. The return terminates all attempts of incoming socket connections in the future, even if the condition is reconciled. The fix is to not return from vhost-user-process, record the error in the interface, spit out the error, and retry the connection every 3 seconds. Change-Id: I806baedf13e8c9b73e7c7820c094240f39949950 Signed-off-by: Steven <sluong@cisco.com>
2017-03-28af_packet driver needs to check VLIB_BUFFER_NEXT_PRESENT flag is setJim Gibson1-1/+2
when walking vlib_buffer_t next_buffer chain on transmit. On buffer allocation: - next_buffer is not and may contain a stale invalid value that should be ignored if not overwritten by a valid value. - VLIB_BUFFER_NEXT_PRESENT flag is cleared and only set if a valid value is written to next_buffer. Change-Id: I9b0ccdc54f4f7456f8328ce7c4a0d52d0fba8caa Signed-off-by: Jim Gibson <gibson+fdio@cisco.com>
2017-03-26Rename "show interfaces" -> "show interface"Dave Barach2-2/+2
To line up with "show interface placement," recently added. Otherwise, "show int" refers only to "show interface placement," which tends to annoy the cash customers... Change-Id: Iea9e3681aeb051e2b0e1ecbf06706d98af9a3abf Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-22vhost: support interrupt modeSteven2-22/+322
vhost currently supports only polling mode. This patch is to add interrupt mode. When the interface is configured for interrupt mode, our input node does not get called unless there is a packet in the vring. If a particular CPU has one interface configured for polling mode and another in interrupt, the input node is set to polling for that CPU. This diffs also includes two crashes in vlib's dispatch_node. One is included in https://gerrit.fd.io/r/#/c/5516. The other crash is in the ASSERT. The ASSERT can become true when the caller of dispatch_node is in a loop. The first call converted the node to polling. The second call thereafter will hit the ASSERT. Change-Id: If17b6d48b20d7d8605c6a161459828637173cd32 Signed-off-by: Steven <sluong@cisco.com>
2017-03-20vnet: add device-input threadplacement infraDamjan Marion5-68/+300
This change adds two new debug CLI command: - "show interface placmenet" to display which thread (main or worker) is responsible for processing interface rx queue vpp# show interface placement Thread 0 (vpp_main): node af-packet-input: host-vpp1 queue 0 Thread 1 (vpp_wk_0): node af-packet-input: host-virbr0 queue 0 Thread 2 (vpp_wk_1): node af-packet-input: host-vpp2 queue 0 host-lxcbr0 queue 0 - "set interface placmenet" to assign thread (main or worker) which process specific interface rx queue vpp# set interface placement host-vpp1 queue 0 main Change-Id: Id4dd00cf2b05e10fae2125ac7cb4411b446c5e9c Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-17Fix IP feature ordering.Neale Ranns1-1/+0
Drop comes before lookup when enabled. is_first_or_last is not required when setting a feature, the anchor is added in find_config_with_features(). Don't make the PG interfaces automatically L3 enabled, this way we can have tests that check the L3 protocol disbaled behaviour. Change-Id: Icef22a920b27ff9cec6ab2da6b05f05c532cb60f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-16vhost: wrong value return for VHOST_USER_VRING_GET_BASESteven1-4/+11
When the VM is migrated, the driver sends VHOST_USER_VRING_GET_BASE message to the device to get the vring offset. The device is supposed to shut down the vring, and return the current vring offset. What the code did was to shutdown the vring, initialize the vring, and return 0 to the driver. The fix is to first store last_avail_idx in the message and then close the vring. Change-Id: I432e9f50f36d89fe53a45e050edcf5e1218caf7a Signed-off-by: Steven <sluong@cisco.com>
2017-03-10Retire vpp_liteDamjan Marion4-4465/+0
vpp_lite platform is not needed anymore as same efect can be achieved with following startup.conf config: plugins { plugin dpdk_plugin.so { disable } } Change-Id: I690ea8ceb1c6e1fe32e01e7da54e9958019a93bf Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-09vlib_mains == 0 special cases be goneDave Barach1-5/+4
Clean up spurious binary API client link dependency on libvlib.so, which managed to hide behind vlib_mains == 0 checks reached by VLIB_xxx_FUNCTION macros. Change-Id: I5df1f8ab07dca1944250e643ccf06e60a8462325 Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-08vhost: binary API changes for interrupt modeSteven4-10/+41
Add operation_mode for create_vhost_user_if, modify_vhost_user_if, and sw_interface_vhost_user_details. Only polling mode is supported for these APIs. Other mode is rejected and gets VNET_API_ERROR_UNIMPLEMENTED error. Change-Id: I0596f4e2c087aa2b6f78eb3e0b63910b1859641e Signed-off-by: Steven <sluong@cisco.com>
2017-03-06features: take device-input buffer advance value directlyDamjan Marion3-4/+3
Change-Id: Ifac7d9134d03d79164ce6f06ae9413279bbaadb3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-02Clean up binary api message handler registration issuesDave Barach1-9/+1
Removed a fair number of "BUG" message handlers, due to conflicts with actual message handlers in api_format.c. Vpp itself had no business receiving certain messages, up to the point where we started building in relevant code from vpp_api_test. Eliminated all but one duplicate registration complaint. That one needs attention from the vxlan team since the duplicated handlers have diverged. Change-Id: Iafce5429d2f906270643b4ea5f0130e20beb4d1d Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-01dpdk: be a pluginDamjan Marion25-11695/+0
Change-Id: I238258cdeb77035adc5e88903d824593d0a1da90 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-01devices: vnet_get_aggregate_rx_packets should not be dpdk specificDamjan Marion9-44/+58
Change-Id: I1152db4b7d1602653d7d8b2c6cb28cf5c526c4ca Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-28dpdk: retire support for dpdk 16.07Damjan Marion5-58/+3
Change-Id: I8585552c026415340fe9fd0458cb8450da3c4ae2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-28vlib: add buffer cloning supportDamjan Marion2-13/+39
Change-Id: I50070611af15b2b4cc29664a8bee4f821ac3c835 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-27vlib: add VLIB_BUFFER_EXT_HDR_VALID flagDamjan Marion2-2/+2
Change-Id: If56c66dd12eded1cc997087de5fd1b975766c4e2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-24Fixed QAT device binding and device unbinding when vpp package is removedRadu Nicolau1-1/+1
Change-Id: I35ad6a42093cad0945df1df09a39c63c4560dce6 Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2017-02-24VPP-279: Document changes for vnet/vnet/devicesBilly McFall2-100/+617
Add doxygen documentation for dpdk CLI commands. Outside of adding documentation to the CLI Commands, modified the CLI code as follows: * The "set dpdk interface placement" command allows the user to move interface/queues to a different thread. But there is only a subset of threads that are valid. Updated the "show dpdk interface placement" command to display all valid threads, even if all interface/queues have been moved off. Updated the "show dpdk interface hqos placement" the same way. * There is a command to modify the Subport attributes, but no way to display the changes. Added a "Subport" section to the "show dpdk interface hqos" command. * Reworked the "set dpdk interface hqos subport" command. - The current implementation had a local rte_sched_subport_params structure and initialized it to default values, then overwrote with what was input. The side effect of this is that if all the current data is non-default, and a new command is entered with just one attribute, all the remaining attrbutes are getting set back to default under the cover. Very confusing for the user. Updated the code to read the current value and overwrite what has changed. - DPDK does not have a read subport data, so no way query the current applied values. The set command was not updating the local copy that is created at init. Modified the code to store the updated values if the DPDK apply function was successful. - Several functions repeated the same code to get a pointer to the local HQoS data. Added a utility function.get_hqos(..), to perform this action. Did not port other code to use new function. * The "set dpdk interface hqos pktfield" allows the user to set the packet fields required for classifiying the incoming packet. The classification is across three fields (subport, pipe, tc). The command was using 0,1,2 to represent these three fields, but had no explanation regarding these magic numbers. Updated the command to take the three tokens (subport, pipe, tc) for more clarity. For legacy sake, still allow 0,1,2 to be entered. Also updated the "show dpdk interface hqos" command to show these tokens. * The "set dpdk interface hqos tctbl" maps an interface and value 0-63 to a traffic class and queue. The "show dpdk interface hqos" command showed the internal DPDK magic number for traffic class and queue. Updated the show command to display what was input instead of the magic number. * The "show dpdk hqos queue" command always returns zeros by default because RTE_SCHED_COLLECT_STATS is not defined in DPDK. Took me a while to figure out why I wasn't getting values returned. So returned an error message if RTE_SCHED_COLLECT_STATS is not defined instead of zeros. Change-Id: I22b640d668245839ee977ef3602175c61d91d24c Signed-off-by: Billy McFall <bmcfall@redhat.com>
2017-02-22VPP-635: CLI Memory leak with invalid parameterBilly McFall5-134/+343
In the CLI parsing, below is a common pattern: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else return clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); } unformat_free (line_input); The 'else' returns if an unknown string is encountered. There a memory leak because the 'unformat_free(line_input)' is not called. There is a large number of instances of this pattern. Replaced the previous pattern with: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else { error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); goto done: } } /* ...Remaining code... */ done: unformat_free (line_input); return error; } In multiple files, 'unformat_free (line_input);' was never called, so there was a memory leak whether an invalid string was entered or not. Also, there were multiple instance where: error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); used 'input' as the last parameter instead of 'line_input'. The result is that output did not contain the substring in error, instead just an empty string. Fixed all of those as well. There are a lot of file, and very mind numbing work, so tried to keep it to a pattern to avoid mistakes. Change-Id: I8902f0c32a47dd7fb3bb3471a89818571702f1d2 Signed-off-by: Billy McFall <bmcfall@redhat.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-17Implemented IKEv2 initiator features:Radu Nicolau2-0/+4
- IKE_SA_INIT and IKE_AUTH initial exchanges - Delete IKA SA - Rekey and delete Child SA - Child SAs lifetime policy To set up one VPP instance as the initiator use the following CLI commands (or API equivalents): ikev2 profile set <id> responder <interface> <addr> ikev2 profile set <id> ike-crypto-alg <crypto alg> <key size> ike-integ-alg <integ alg> ike-dh <dh type> ikev2 profile set <id> esp-crypto-alg <crypto alg> <key size> esp-integ-alg <integ alg> esp-dh <dh type> ikev2 profile set <id> sa-lifetime <seconds> <jitter> <handover> <max bytes> and finally ikev2 initiate sa-init <profile id> to initiate the IKE_SA_INIT exchange Child SA re-keying process: 1. Child SA expires 2. A new Child SA is created using the Child SA rekey exchange 3. For a set time both SAs are alive 4. After the set time interval expires old SA is deleted Any additional settings will not be carried over (i.e. settings of the ipsec<x> interface associated with the Child SA) CLI API additions: ikev2 profile set <id> responder <interface> <addr> ikev2 profile set <id> ike-crypto-alg <crypto alg> <key size> ike-integ-alg <integ alg> ike-dh <dh type> ikev2 profile set <id> esp-crypto-alg <crypto alg> <key size> esp-integ-alg <integ alg> esp-dh <dh type> ikev2 profile set <id> sa-lifetime <seconds> <jitter> <handover> <max bytes> ikev2 initiate sa-init <profile id> ikev2 initiate del-child-sa <child sa ispi> ikev2 initiate del-sa <sa ispi> ikev2 initiate rekey-child-sa <profile id> <child sa ispi> Sample configurations: Responder: ikev2 profile add pr1 ikev2 profile set pr1 auth shared-key-mic string Vpp123 ikev2 profile set pr1 id local fqdn vpp.home.responder ikev2 profile set pr1 id remote fqdn vpp.home.initiator ikev2 profile set pr1 traffic-selector remote ip-range 192.168.125.0 - 192.168.125.255 port-range 0 - 65535 protocol 0 ikev2 profile set pr1 traffic-selector local ip-range 192.168.124.0 - 192.168.124.255 port-range 0 - 65535 protocol 0 Initiator: ikev2 profile add pr1 ikev2 profile set pr1 auth shared-key-mic string Vpp123 ikev2 profile set pr1 id local fqdn vpp.home.initiator ikev2 profile set pr1 id remote fqdn vpp.home.responder ikev2 profile set pr1 traffic-selector local ip-range 192.168.125.0 - 192.168.125.255 port-range 0 - 65535 protocol 0 ikev2 profile set pr1 traffic-selector remote ip-range 192.168.124.0 - 192.168.124.255 port-range 0 - 65535 protocol 0 ikev2 profile set pr1 responder TenGigabitEthernet3/0/1 192.168.40.20 ikev2 profile set pr1 ike-crypto-alg aes-cbc 192 ike-integ-alg sha1-96 ike-dh modp-2048 ikev2 profile set pr1 esp-crypto-alg aes-cbc 192 esp-integ-alg sha1-96 esp-dh ecp-256 ikev2 profile set pr1 sa-lifetime 3600 10 5 0 Change-Id: I1db9084dc787129ea61298223fb7585a6f7eaf9e Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2017-02-17dpdk: quad loop and prefetch in fill_free_listDamjan Marion1-15/+71
Change-Id: I19ec3b769b6512f7408044751393d9faf10d01d5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-14VPP-279: Document changes for vnet/vnet/devicesBilly McFall2-52/+210
Add doxygen documentation for pcap tx trace CLI command. In the process of adding the documentation, made the following changes to the way the command worked: * If there is an error with any of the attributes, the whole command fails. The existing behavior was to apply attribute by attribute, then bail if there was an issue, with partial apply. * Move the 'on' processing to the end. The existing behavior was to process the 'on' as it was encountered on the commandline. That meant that any attributes after the 'on' in the commandline were saved and displayed, but not really being used in the packet trace. * Enhanced the 'status' to show all the configured attributes. NOTE: The packet capture has some weird behavior with regards to how many packets are written to file and if the file is appended or overwritten. VPP-634 written to document the issue. Change-Id: Iab241228b125385052de242865afd9515fa2524f Signed-off-by: Billy McFall <bmcfall@redhat.com>
2017-02-14Fix is_server flag in vhost dump (VPP-562)Marek Gradzki1-0/+1
Change-Id: I5b308eb39ae770d58d1498d7fafa49b236b3f534 Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2017-02-14vhost-user: fix crash when descriptor points to unknown regionDamjan Marion1-1/+2
This happens only on when compiled for older microarchitectures, where BSF insutruction is used instead of TZCNT. BSF provides undefined result if operand is 0. Change-Id: I7a13350786a533428168595097ef01a560fde53b Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-06vlib: remove algned/unaligned buffers schemeDamjan Marion1-118/+13
Change-Id: I4433eaed3f4e201edc329c4842cbbf74beb19a9a Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-04dpdk: move to uio_pci_genericDamjan Marion1-1/+1
Change-Id: I3d8b7947ae6d721e9b514a59a7d2de49aed419b5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-03vhost-user: fix missing speculative enqueue unwindSteven1-0/+4
Running trex in a VM with a bad config, trex sent a bogus pack from the VM to the Virtual interface. It caused a crash. Change-Id: I64d0197b444265553ab4c24f21e6a962e89cb587 Signed-off-by: Steven <sluong@cisco.com>
2017-02-02dpdk: fix crypto coverity warningSergio Gonzalez Monroy1-1/+2
Change-Id: I165b64fdc12dd2936df1958348e93b709ce0e784 Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-01-27dpdk: rework cryptodev ipsec build and setupSergio Gonzalez Monroy11-166/+287
Build Cryptodev IPsec support by default when DPDK is enabled but only build hardware Cryptodev PMDs. To enable Cryptodev support, a new startup.conf option for dpdk has been introduced 'enable-cryptodev'. During VPP init, if Cryptodev support is not enabled or not enough cryptodev resources are available then default to OpenSSL ipsec implementation. Change-Id: I5aa7e0d5c2676bdb41d775ef40364536a081956d Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-01-27dpdk : incorrect rx filter being installedPavel Kotucek3-1/+20
When mac address is set prior bringing interface up incorrect rx filter being installed into the e1000 mac. Change-Id: If59a2bf16f732e45221b3787d271307d369e54d3 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-01-19af_packet: multithreading supportMohsin KAZMI4-11/+86
This patch adds multithreading support for af_packet interfaces. Change-Id: Ief5d1117e7ffeaa59dbc2831e583d5d8e8d4fa7a Signed-off-by: Mohsin KAZMI <sykazmi@cisco.com>
2017-01-18Fix coverity warnings, VPP-608Dave Barach1-2/+6
Change-Id: Ib0144ba3a9a09971d3946c932e8fed6d5c1ad278 Signed-off-by: Dave Barach <dave@barachs.net>
2017-01-17Fix crash on deleting activated vhost-user - VPP-603Wojciech Dec1-3/+4
Vhost-user pool getting freed prematurely Change-Id: I952821ec85efa68923d09a643c70b6b309ea2574 Signed-off-by: Wojciech Dec <wdec@cisco.com>
2017-01-17dpdk: remove duplicate code in buffers.cDamjan Marion1-122/+9
Change-Id: Idc17b4a32d40012556d5d8550942db0372ebf23d Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-16dpdk: add 'show dpdk version' cliDamjan Marion1-0/+20
Change-Id: Iaecebae25ee4b8df8ca919992a0433e92e82e90c Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-16dpdk: register rte_delay_us callback from vnetDamjan Marion1-0/+90
Change-Id: Ibf7fc9a54d3fbee431b4814fa8abc5ba29ed9eef Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-14vlib: add buffer and thread callbacksDamjan Marion7-10/+827
Change-Id: I8e2e8f94a884ab2f9909d0c83ba00edd38cdab77 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-14VPP-279: Document changes for vnet/vnet/devicesBilly McFall3-3/+97
Add doxygen documentation for netmap CLI commands. Change-Id: I8d3ce12b1cfa5af30ddcd31cb476ca4652cfc2f3 Signed-off-by: Billy McFall <bmcfall@redhat.com>
2017-01-13VPP-580: Host Interface created via Command Line Arg is misnamedBilly McFall1-1/+1
Host interfaces created via the command-line arguments are missed named (i.e. - UnknownEthernet0 instead of af_packet0). In DPDK 16.11, they changed the driver names from eth_xxx to net_xxx. However, looks like the AF_PACKET driver still returns "AF_PACKET PMD" as the driver name in the rte_eth_dev_info_get(..) call. I modified the driver name look table in vnet/devices/dpdk/dpdk.h to revert the name back. Change-Id: I2b0a9f6b4d5245b76548027891d40f81a56b230d Signed-off-by: Billy McFall <bmcfall@redhat.com>
2017-01-10VPP-585: vhost-user interface deletion leaks memory.Ole Troan1-0/+7
Change-Id: I69bbc447e1989adea40f052eac4550036b6e2e1e Signed-off-by: Ole Troan <ot@cisco.com>
2017-01-10API refactoring : dpdkPavel Kotucek2-0/+349
Change-Id: If2541be803a0303401b013390e117c26fd1d9739 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-01-09VPP-279: af_packet via Command-line Arg should no longer be supportedBilly McFall1-0/+3
With the CLI command 'create host-interface', no longer need to support af_packet interface creation via Command-line Arg. However, this is mostly implemented by passing arguments to DPDK. Instead of blocking functionality, put a warning in the log directing the user to the CLI. Change-Id: I6c6fba6096f32ef232f1da0c5d39396c6d13f54f Signed-off-by: Billy McFall <bmcfall@redhat.com>
2017-01-06VPP-279: doxygen documentation for host interface CLI commandsBilly McFall2-2/+65
Change-Id: I2c6c16688be35e2e122c2377ded467c68a4c5a97 Signed-off-by: Billy McFall <bmcfall@redhat.com>