summaryrefslogtreecommitdiffstats
path: root/src/vnet/devices
AgeCommit message (Collapse)AuthorFilesLines
2019-02-19tap gso: experimental supportAndrew Yourtchenko7-8/+248
This commit adds a "gso" parameter to existing "create tap..." CLI, and a "no-gso" parameter for the compatibility with the future, when/if defaults change. It makes use of the lowest bit of the "tap_flags" field in the API call in order to allow creation of GSO interfaces via API as well. It does the necessary syscalls to enable the GSO and checksum offload support on the kernel side and sets two flags on the interface: virtio-specific virtio_if_t.gso_enabled, and vnet_hw_interface_t.flags & VNET_HW_INTERFACE_FLAG_SUPPORTS_GSO. The first one, if enabled, triggers the marking of the GSO-encapsulated packets on ingress with VNET_BUFFER_F_GSO flag, and setting vnet_buffer2(b)->gso_size to the desired L4 payload size. VNET_HW_INTERFACE_FLAG_SUPPORTS_GSO determines the egress packet processing in interface-output for such packets: When the flag is set, they are sent out almost as usual (just taking care to set the vnet header for virtio). When the flag is not enabled (the case for most interfaces), the egress path performs the re-segmentation such that the L4 payload of the transmitted packets equals gso_size. The operations in the datapath are enabled only when there is at least one GSO-compatible interface in the system - this is done by tracking the count in interface_main.gso_interface_count. This way the impact of conditional checks for the setups that do not use GSO is minimized. "show tap" CLI shows the state of the GSO flag on the interface, and the total count of GSO-enabled interfaces (which is used to enable the GSO-related processing in the packet path). This commit lacks IPv6 extension header traversal support of any kind - the L4 payload is assumed to follow the IPv6 header. Also it performs the offloads only for TCP (TSO - TCP segmentation offload). The UDP fragmentation offload (UFO) is not part of it. For debug purposes it also adds the debug CLI: "set tap gso {<interface> | sw_if_index <sw_idx>} <enable|disable>" Change-Id: Ifd562db89adcc2208094b3d1032cee8c307aaef9 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-02-14Add -fno-common compile optionBenoît Ganne3-3/+3
-fno-common makes sure we do not have multiple declarations of the same global symbol across compilation units. It helps debug nasty linkage bugs by guaranteeing that all reference to a global symbol use the same underlying object. It also helps avoiding benign mistakes such as declaring enum as global objects instead of types in headers (hence the minor fixes scattered across the source). Change-Id: I55c16406dc54ff8a6860238b90ca990fa6b179f1 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-02-09buffers: fix typoDamjan Marion4-7/+6
Change-Id: I4e836244409c98739a13092ee252542a2c5fe259 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-02-06buffers: make buffer data size configurable from startup configDamjan Marion4-5/+6
Example: buffers { default data-size 1536 } Change-Id: I5b4436850ca18025c9fdcfc7ed648c2c2732d660 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-02-06virtio: enable msix interrupt modeMohsin Kazmi4-44/+114
Change-Id: Idd560f3afde1dd03bc3d6fbb2070096146865f50 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-02-06virtio: Use new buffer optimizationMohsin Kazmi5-2/+24
Change-Id: Ifc98373371b967c49a75989eac415ddda1dcf15f Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-01-30virtio: fix the device order (legacy or modern)Mohsin Kazmi1-3/+3
Change-Id: I60f88d50f062b004e6dea487bd627d303d0a5e75 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-01-29virtio: Support legacy and transitional virtio devicesMohsin Kazmi1-3/+11
Change-Id: Ib1316482dd7b1ae3c27c7eeb55839ed8af9ca162 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-01-24virtio: Minor fixes and header cleanupMohsin Kazmi5-24/+7
Change-Id: I2e5fd45abcd07e9eda6184587889bdcd9613a159 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-01-23virtio: Add support for loggingMohsin Kazmi4-31/+97
Change-Id: Ieadf0a97379ed8b17241e454895c4e5e195dc52f Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-01-21virtio: Native virtio driverMohsin Kazmi11-173/+2069
Change-Id: Id7fccf2f805e578fb05032aeb2b649a74c3c0e56 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-01-08virtio: fix kick race issueDamjan Marion3-10/+29
Change-Id: I25b2a28513821bc5eab9ac6890a3964d412b0399 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-07tapv2: add "tap_flags" field to the TAPv2 interface APIAndrew Yourtchenko3-0/+8
Change-Id: I26f99d95f52c9fe107d17dcbbf5c6185523beade Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-01-02Fixes for buliding for 32bit targets:David Johnson1-0/+1
* u32/u64/uword mismatches * pointer-to-int fixes * printf formatting issues * issues with incorrect "ULL" and related suffixes * structure alignment and padding issues Change-Id: I70b989007758755fe8211c074f651150680f60b4 Signed-off-by: David Johnson <davijoh3@cisco.com>
2019-01-01buffers: remove unused codeDamjan Marion3-7/+4
Change-Id: If2bbfbc52994f5de0879763e0b7a7864498debb6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-12-22tapv2: coverity woeSteven1-2/+4
coverity complains about fd leaking inside the if statement because there is a goto which bypasses the statement close (fd). The fix is to close (fd) immediately after it is no longer used. Change-Id: Ic5035b07ec1f179ff3db77744843e47aa8067a3c Signed-off-by: Steven <sluong@cisco.com>
2018-11-26Add a feature arc consistency checkDave Barach1-0/+1
Verify that last node in the computed feature order matches reality. This check doesn't make sense in all cases, so we skip it if the newly-added vnet_feature_arc_registration_t ".last_in_arc" datum is a NULL pointer. Change-Id: Ia99c3e2b2da2e4780a7d5bc71670c5742a66fef2 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-23vhost-user: use memory store barrierDamjan Marion1-3/+3
Should be less expensive... Change-Id: I678a39e42a054bf5f6ef9c59d0fb93ff9719b964 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-23vhost-user: add missing inlinesDamjan Marion1-2/+2
Change-Id: I1ed39c4ee084b26faac8286d9729413311ba9508 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-23vhost-user: avoid global storage accessDamjan Marion1-26/+34
Change-Id: I9dbeff51d3ede6db3cd5a097623aa580e5e25042 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-23vhost-user: simplify input loopDamjan Marion1-181/+174
Change-Id: I6e6963882825e83d8da3a460be35c7349e107777 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-22vhost-user: hint ethernet-input about single sw_if_indexDamjan Marion1-1/+16
Change-Id: Ia495f8f50c43baf0d6eeb8e9ba04314ce277286f Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-22vhost-user: avoid per-packet feature arc lookupsDamjan Marion1-12/+18
Change-Id: If96f5a7c7e4b511cab3d57e5b57796aa516aff11 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-22vhost-user: fix input node runtime statsDamjan Marion1-2/+2
Change-Id: Idda43d1236889ef91d8c37faf98ae23a19de688c Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-20vhost-user: cleanupDamjan Marion2-65/+44
Change-Id: Ibf68423e9514b8e85cdf0a3e57ababd55dd4fcc4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-17pcap-based dispatch tracerDave Barach1-1/+1
To facilitate dispatch trajectory tracing, vlib_buffer_t decoding, etc. through Wireshark Change-Id: I31356b9fa1f40cba8830aaf10a86a9fbb7546438 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach9-28/+27
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-13vlib rename vlib_frame_args(...) to vlib_frame_scalar_args(..)Damjan Marion5-8/+8
Typically we have scalar_size == 0, so it doesn't matter but vlib_frame_args was providing pointer to scalar frame data, not vector data. To avoid future confusion function is renamed to vlib_frame_scalar_args(...) Change-Id: I48b75523b46d487feea24f3f3cb10c528dde516f Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-06vhost: crash in vhost_user_tx_avx2Steven1-0/+6
(gdb) bt bt Backtrace stopped: previous frame inner to this frame (corrupt stack?) (gdb) frame 5 frame 5 293 if (PREDICT_FALSE (rxvq->last_avail_idx == rxvq->avail->idx)) (gdb) p *rxvq p *rxvq $3 = {cacheline0 = 0x7f290bcadd80 "\377\003", qsz_mask = 1023, last_avail_idx = 0, last_used_idx = 0, n_since_last_int = 0, desc = 0x0, avail = 0x0, used = 0x0, int_deadline = 0, started = 1 '\001', enabled = 1 '\001', log_used = 0 '\000', cacheline1 = 0x7f290bcaddc0 "\377\377\377\377\016", errfd = -1, callfd_idx = 14, kickfd_idx = 19, log_guest_addr = 5151049792, mode = 0} The crash is because we access the null pointer rxvq->avail, which is supposed to be derived from the mmap informed by the driver. We fixed a similar issue before in https://gerrit.fd.io/r/#/c/14545/ The reason was the driver ummaps the memory without doing the disconnect in SR-IOV environment. The fixed was applied to the RX path. Now it happens in the TX path. We just need to apply the same check in the TX path. Change-Id: I7b1dfc96797cb5b52845bc6cec09a8c5d4325280 Signed-off-by: Steven <sluong@cisco.com>
2018-11-05Enable atomic swap and store macro with acquire and release orderingSirshak Das2-5/+9
Add atomic swap and store macro with acquire and release ordering respectively. Variable in question is interupt_pending variable which is used as guard variable by input nodes to process the device queue. Atomic Swap is used with Acquire ordering as writes or reads following this in program order should not be reordered before the swap. Atomic Store is used with Release ordering, as post store the node is added to pending list. Change-Id: I1be49e91a15c58d0bf21ff5ba1bd37d5d7d12f7a Original-patch-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Sirshak Das <sirshak.das@arm.com> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com> Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
2018-10-27virtio: remove the extra return callMohsin Kazmi1-2/+0
Change-Id: I6e43953a6ad1bd672e69d8377d18bd9614b469d8 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-10-23c11 safe string handling supportDave Barach13-29/+29
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-20pipes: fix the l2.l2_len and the l[23]_hdr_offset setting behavior of ↵Andrew Yourtchenko1-29/+30
pipe-rx node to match that of ethernet-input node Since pipe-rx is a sibling node of ethernet-input, it ought to perform similarly: set l2/l3 header offsets, and l2.l2_len value if the interface is in the l2 mode. The use cases of pipes do not assume the tagged traffic, so assume the simple ethernet header. Change-Id: I7c9b5f4f2b1402cfbd10513f76cdd59b2db7a7a6 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-19vppinfra: add atomic macros for __sync builtinsSirshak Das1-2/+2
This is first part of addition of atomic macros with only macros for __sync builtins. - Based on earlier patch by Damjan (https://gerrit.fd.io/r/#/c/10729/) Additionally - clib_atomic_release macro added and used in the absence of any memory barrier. - clib_atomic_bool_cmp_and_swap added Change-Id: Ie4e48c1e184a652018d1d0d87c4be80ddd180a3b Original-patch-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Sirshak Das <sirshak.das@arm.com> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com> Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com> Reviewed-by: Steve Capper <steve.capper@arm.com>
2018-10-02vhost-user: add support for vlib_log APIJerome Tollet4-177/+129
Change-Id: I0af68f6b41d0024aa64b93a8b18e2d179bf939b0 Signed-off-by: Jerome Tollet <jtollet@cisco.com> Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-02vhost-user: Interface state updatesJuraj Sloboda4-16/+29
Fix inconsistencies between admin and link interface states Admin down should imply link down: link_up = admin_up && link_ready Change-Id: I4d668d82d035b5d2ae508727f34f1722a0c3e677 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-10-02vhost_user: Fix setting MTU using uninitialized variableJuraj Sloboda1-2/+1
Change-Id: I0caa5fd584e3785f237d08f3d3be23e9bfee7605 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-09-20vhost: show vhost may display garbage after the interface nameSteven1-2/+3
DBGvpp# show vhost-user Virtio vhost-user interfaces Global: coalesce frames 32 time 1e-3 number of rx virtqueues in interrupt mode: 0 Interface: VirtualEthernet0/0/0�?x�D (ifindex 3) The fix is to use format_vnet_hw_if_index_name rather than hi->name. The former format the name with %v rather than %s Change-Id: If4d275e1eb249cf87b2d6b796b42f24769f9e3e3 Signed-off-by: Steven <sluong@cisco.com>
2018-09-20vhost-user: Add disable feature support in apiMohsin Kazmi2-2/+16
Two flags to disable mergable rx buffers and indirect descriptors are added to api. Change-Id: Iba0ee9c48d19dfc3d3420a3fdaf44a1a1d325e99 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-09-12vhost: Fix VPP crash when reloading VM with mixed-type ports [VPP-1406]Yichen Wang2-1/+15
When VM is having mixed type of vhost-user and SRIOV ports, QEMU (RedHat v2.10) will not send disconnect signal to VPP, and just gives the new memory region directly. VPP is not able to handle new memory region mapping without disconnect signal first, which will result in a SEGV. The fix will handle the VM reboot scenario without explict disconnect signal from QEMU. The fix is to invalidate the avail, desc, and used pointers in the txvq when the new memory regions are received. This is because these pointers are not valid anymore with the new memory regions. In the input node, check to make sure the avail pointer is valid and punt if not. Change-Id: Ieb8b427b202f4442a58907dab1661d63a03650de Signed-off-by: Yichen Wang <yicwang@cisco.com>
2018-09-08L2 BVI/FIB: Update L2 FIB table when BVI's MAC changesNeale Ranns1-1/+1
also some moving of l2 headers to reduce dependencies Change-Id: I7a700a411a91451ef13fd65f9c90de2432b793bb Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-17Fix a bug in function pipe_rxLijian Zhang1-1/+1
GCC 7 found this issue with a compiling warning, and this bug has been confirmed by module owner. Change-Id: If29e857b3a87f91f08674aee6993b075fcff87e7 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
2018-08-13Multiarch handling in different constructor macrosDamjan Marion2-5/+0
This significantly reduces need for ... in multiarch code. Simply constructor macros will jost create static unused entry if CLIB_MARCH_VARIANT is defined and that will be optimized out by compiler. Change-Id: I17d1c4ac0c903adcfadaa4a07de1b854c7ab14ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-11Multiversioning: Device (tx) function constructorMohsin Kazmi1-18/+3
Change-Id: I39f87ca161c891fb22462a23188982fef7c3243f Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-07-17VOM: support for pipesNeale Ranns2-10/+10
Change-Id: I5c381dfe2f926f94a34ee8ed8f1b9ec6038d5fe2 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-11avoid using thread local storage for thread indexDamjan Marion5-6/+6
It is cheaper to get thread index from vlib_main_t if available... Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-09new pipe code does not use stdintsNeale Ranns1-2/+2
Change-Id: Idee565af852c7bb434b886fbf31c6e76315686c4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-08vhost: Add multi-versioning supportMohsin Kazmi6-1534/+1667
It also refactors the vhost code which was in one big file vhost-user.c. Receive side code is in vhost_user_input.c and Transmit side code is in vhost_user_output.c Change-Id: I1b539b5008685889723e228265786a2a3e9f3a78 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-07-07PipesNeale Ranns4-0/+1141
A pipe resembles a unix pipe. Each end of the pipe is a full VPP interface. pipes can be used for e.g. packet recirculation, inter-BD, etc. Change-Id: I185bb9fb43dd233ff45da63ac1b85ae2e1ceca16 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-06-27gcc8 and Wstringop-truncationMarco Varlese1-2/+2
gcc8 introduced a new warning (Wstringop-truncation) which in our case is being treated as error. Disabling the warning globally might introduce bugs related to string truncation which are not desired by the developer (e.g. bug). Instead, this patch disables the warning only for those occurences which have been verified to be non-bugs but the desired behaviour as per developer will. Change-Id: I0f04ff6b4fad44061e80a65af633fd7e0148a0c5 Signed-off-by: Marco Varlese <marco.varlese@suse.com>