Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Change-Id: Ie0cff37b474f8d85a3ae376e0f547a347fb1ad8a
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
From kernel 4.20, xdp support has been added in tun_sendmsg.
If sndbuf == INT_MAX, kernel executes xdp data path
for tun driver which assumes packets are ethernet frames.
This patch is avoiding the xdp data path in kernel by setting
the sendbuf value < INT_MAX.
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ia4aa54b177b96d56a2d513d18d26ca01d5b88929
|
|
Type: fix
Change-Id: I3bcc8ff1cf0a828ce3ba112694d38e3287d38d8d
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I0b1a1ce085ceb75fe139092e40878566682a7986
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ifeae641ec0aa7de74e33e582234505bf6e28ca87
|
|
Type: fix
Change-Id: I92e8e30e4175229e24dd92471016e9095b5cc83e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
The filter sw_if_index was in the API sw_interface_vhost_user_dump. But
it was never implemented in the backend. This patch is to add the backend,
vat, and custom dump support for the filter.
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Iaa41a7e11bfbcbb4c60092375e4b0dcf0950077b
|
|
Type: improvement
Change-Id: I220ea6ab609e3c1628f5210be441d0d5e825a32c
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Change-Id: I5b9d5ea192776f14a45bf909acc4bef7793521e8
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: docs
Signed-off-by: John DeNisco <jdenisco@cisco.com>
Change-Id: Iba106d33d34766b91e46980e7237fbdfc3710b8b
|
|
Type: fix
Change-Id: I5601bdeb47d08118476ff7bd29435d2c1dba34b9
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Fix and optimize DMAC check in ethernet-input node to utilize NIC or
driver which support L3 DMAC-filtering mode so that DMAC check can be
bypassed safely for interfaces/sub-interfaces in L3 mode.
Checking of interface in L3-DMAC-filtering state to avoid DMAC check
require the following:
a) Fix interface driver init sequence for devices which supports L3
DMAC-filtering to indicate its capability and initialize interface
to L3 DMAC-filtering state.
b) Fix ethernet_set_flags() function and its associated callback
flags_change() functions registered by various drivers in interface
infra to provide proper L3 DMAC filtering status.
Maintain interface/sub-interface L3 config count so DMAC checks can be
bypassed if L3 forwarding is not setup on any main/sub-interfaces.
Type: fix
Ticket: VPP-1868
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
|
|
Type: feature
Change-Id: I37752af8496e0042a1da91124f3d94216b39ff11
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Add a hook to src/vlibapi/api_shared.c to fuzz (screw up) binary API
messages, e.g. by xoring random data into them before processing. We
specifically exempt client connection messages, and inband debug CLI
messages. We step over msg_id, client index, client context, and
sw_if_index. Otherwise, "make test" vectors fail too rapidly to learn
anything.
The goal is to reduce the number of crashes caused to zero. We're
fairly close with this patch.
Add vl_msg_api_max_length(void *mp), which returns the maximum
plausible length for a binary API message.
Use it to hardern vl_api_from_api_to_new_vec(...) which takes an
additional argument - message pointer - so it can verify that
astr->length is sane. If it's not sane, return a u8 *vector of the
form "insane astr->length nnnn\0".
Verify array lengths in vl_api_dhcp6_send_client_message_t_handler(...)
and vl_api_dhcp6_pd_send_client_message_t_handler(...).
Add a fairly effective binary API fuzz hook to the unittest plugin,
and modify the "make test" framework.py to pass "api-fuzz { on|off }"
to enable API fuzzing: "make API_FUZZ=on TEST=xxx test-debug" or similar
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I0157267652a163c01553d5267620f719cc6c3bde
|
|
Type: refactor
This patch refactor the existing flags and also add a new
flag for packet coalescing.
Change-Id: Ic826e4c81313f26d87c475cdf666b06cbed60a3a
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Change-Id: I6f607f383dc77a71e8712124f7613b38b4ac065a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: improvement
tap_delete_if() returns early if the interface type is not
VIRTIO_IF_TYPE_TAP. Allow VIRTIO_IF_TYPE_TUN also and take
appropriate action for those interfaces.
Change-Id: I196b6d6f3f5e1543a14d6be76fd879d44c9794fd
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
GCC-10 increases string truncations warnings. Refactor string copies
confusing it.
Type: refactor
Change-Id: I9720a0539059de00ab212ff2fc73055f04f5af1d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: Ib09c7cebb6978b3adc09ac36cb32f7947b143e51
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
This matches vhost queues to linux netdev queues and avoids random
packet shuffling across vhost queues on rx.
Change-Id: I9901689d361e440fb0b91c9fbaf8124ce525b316
Type: fix
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
virtio 1.1 defines a number of new features. Packed ring is among the most
notable and important one. It combines used, available, and descripptor rings
into one.
This patch provides experimental support for packed ring. To avoid
regression, when packed ring is configured for the interface, it is branched
to a separate RX and TX driver. Non packed ring should continue to perform
as it was before.
Packed ring is tested using qemu4.2 and ubuntu focal fossa (kernel 5.4.0-12)
on the guess VM which supports packed ring.
To configure VPP with packed ring, just add the optional keyword "packed"
when creating the vhost interface. To bring up the guest VM with packed ring,
add "packed=on" in the qemu launch command.
To facilitate troubleshooting, also added "verbose" option in
show vhost desc CLI to include displaying the indirect descriptors.
Known qemu reconnect issue -
If VPP is restarted, guest VMs also need to be restarted. The problem
is kernel virtio-net-pci keeps track of the previous available and used
indices. For virtio 1.0, these indices are in shared memory and qemu can
easily copy them to pass to the backend for reconnect. For virio 1.1, these
indices are no longer in shared memory. Qemu needs a new mechanism to retrieve
them and it is not currently implemented. So when the protocol reconnects,
qemu does not have the correct available and used indices to pass to the
backend. As a result, after the reconnect, virtio-net-pci is reading the TX
ring from the wrong position in the ring, not the same position which the
backend is writing. Similar problem exists also in the RX.
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I5afc50b0bafab5a1de7a6dd10f399db3fafd144c
|
|
Type: fix
Use the up parameter in vnet_netlink_set_link_state(). It was
ignoring the parameter and always setting IFF_UP on an interface.
Change-Id: I0d44406d982afbdc43bc6b26d0f22c0bdd47abdc
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
When checksum is enable for IPv6, it erroneously set the flag
VNET_BUFFER_F_OFFLOAD_IP_CKSUM. That flag is meant for ip4 packets only.
Type: fix
Ticket: VPP-1857
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Id03b2937bfa34e2a9b50a36aafe0700bad7fb95e
(cherry picked from commit f78294d8468f156e066e7e69aab3a1b285810c3a)
|
|
Type: feature
Change-Id: I85f6ec77187a4983c66c5e22fd39fbb2cef82902
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Some vhost-backed missing the VIRTIO_RING_F_INDIRECT_DESC feature.
Previously, vpp doesn't support jumbo frames using chained descriptors.
This patch fixes this issue.
Type: fix
Change-Id: I20487e201e88ea136b556ac84dde058019ab3e78
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Change-Id: I699a01ac925fe5c475a36032edb7018618bb4dd4
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
GSO and CSUM offloaded packets are transmitted
even itf doesn't support GSO/CSUM. This patch
fixes it by logging the respective errors and
dropping the packets.
Type: fix
Change-Id: I5ab19d15ce6aa9fda515313c313a5a56c0b96837
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Some vhost-backend calculates the wrong checksum in
case of tcp/udp offload when driver resets tcp/udp
checksum field to '0'.
Type: fix
Change-Id: I1d2a9b95b3d5cc1decac38027104a04df2af4680
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I1a60809a8bbbbb8ac8b65ab990d51aae1229647f
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Previously, header parser sets the tcp/udp checksum to 0.
It should be read only function for vlib_buffer_t.
Type: fix
Change-Id: I9c3398372f22998da3df188f0b7db13748303068
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Turn on gso, turn off both indirect and mrg_rxbuf caused traffic received
and sent with checksum error. The problem is we are not mapping the hdr
correctly in the shared memory address.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I7ef3bc2755544167b0e624365988111b17399e89
|
|
Type: fix
Change-Id: Ib320171708bebde6d1dae0b2c665f9bcfc9102db
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Change-Id: I134465760272ceb29f85486cba838d8687696bbf
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
"set int state <interface> down" puts the virtio device link
down. It will not put the link in "UP" state, when
"set int state <interface up>" will be used again to change
the interface admin up. This patch fixes it.
To test:
create tap
set int state tap0 up
set int state tap0 down
sh hardware
sh int
set int state tap0 up
sh int
sh hardware
Change-Id: I3c0e31539f8a2a1e40220e7fb57eedecf408f067
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Some vhost-backends give used descriptors back in
out-of-order. This patch fixes the native virtio to
handle out-of-order descriptors.
Change-Id: I57323303349f6a385e412ee22772ab979ae8edbf
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Fixes: b49bc1a
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I3dd81a2484c8b4925fd07556576c29d1cde337e1
|
|
Type: feature
Change-Id: I775f53531972447ebae0d69b9e2dfeee84d115e5
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: Ia75edb74eb7c746dd4c66bdbff75efb949575ce4
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
- Remove vl_api_from_api_string
to prevent use of not nul-terminated strings.
- Rename vl_api_from_api_to_vec -> vl_api_from_api_to_new_vec
to imply a new vector is created. NOT nul terminated.
- Add vl_api_from_api_to_new_c_string. Returns
nul terminated string in a new vector.
- Add vl_api_c_string_to_api_string. Convert nul terminated
string to vl_api_string_t
- Add vl_api_vec_to_api_string. Convert NON nul terminated
vector to vl_api_string_t
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Iadd59b612c0d960a34ad0dd07a9d17f56435c6ea
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: improvement
Change-Id: I4d8ca04840845e1ba631e4260e155df2486155e6
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I1a20fea56f1ba1fada7c7ce96ea333bf097b1273
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Add features supported by vhost-user
Type: docs
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Iba4c5244c40324b603e2803ade8ecc0816326de8
|
|
Recent modification added a call to vnet_gso_header_offset_parser in the
beginning of vhost_user_handle_tx_offload. The former routine may set tcp or
udp->checksum to 0. While it is appropriate to set it to 0 for the GSO packet,
it is broken and causes checksum error if the aformentiooned routine is called
by a non-GSO packet. The fix is to not call vhost_user_handle_tx_offload
if the buffer does not indicate checksum offload is needed.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I6e699d7a40b7887ff149cd8f77e8f0fa9374ef19
|
|
Both are out of sync for long time...
Type: refactor
Change-Id: I7de3170d35330fc172501d87655dfef91998b8fe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
host mtu can't be set if tap interface is in namespace.
This patch fixes this issue.
Type: fix
Change-Id: I63811c4b56c708fe708061a8afbaec41994f08ca
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Tap configuration code sets the host mac address
two time. This patch fixes it.
Type: fix
Change-Id: I7bebb9b7f25352a8a9a98bae6a0636757c0cea9c
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Regardless of whether the virtio_net_hdr is sent as a separate
descriptors or in the same descriptor as the data, we always want to
skip the header length - maybe moving to the next descriptor along the
way.
Type: fix
Change-Id: Iaa70aeb310e589639b20f8c7029aaa8d3ce5d307
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: docs
Signed-off-by: John DeNisco <jdenisco@cisco.com>
Change-Id: I7280e5c5ad10a66c0787a5282291a2ef000bff5f
|
|
Type: fix
Change-Id: I08747ac308e5c1768a3a6aa5f83a016dc0274a1c
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Change-Id: I0d4b79ef384c11c841576d264bfd8ccb21783e10
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|