summaryrefslogtreecommitdiffstats
path: root/src/vnet/devices
AgeCommit message (Collapse)AuthorFilesLines
2020-08-20virtio: refactor pci device codeMohsin Kazmi6-350/+531
Type: refactor Change-Id: I7342178f9ab9adb99b91a4f984bc22bef2ce8021 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-08-17tap: add gro supportMohsin Kazmi8-14/+87
Type: feature Change-Id: I5868dd267aa26aa97aec5fd70e70c5956ac52277 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-07-22virtio: add the buffer allocation errorMohsin Kazmi1-7/+13
Type: improvement Change-Id: I991e32d531719693c387db4ef93d04d4b562789d Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-07-15virtio: fix the msix for multiqueueMohsin Kazmi2-15/+60
Type: fix Change-Id: Ie0cff37b474f8d85a3ae376e0f547a347fb1ad8a Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-07-07tap: fix the tun sndbuf value for kernel 4.20 and laterMohsin Kazmi1-4/+16
Type: fix From kernel 4.20, xdp support has been added in tun_sendmsg. If sndbuf == INT_MAX, kernel executes xdp data path for tun driver which assumes packets are ethernet frames. This patch is avoiding the xdp data path in kernel by setting the sendbuf value < INT_MAX. Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: Ia4aa54b177b96d56a2d513d18d26ca01d5b88929
2020-07-02tap: fix dump for TUN interfacesMohsin Kazmi2-1/+5
Type: fix Change-Id: I3bcc8ff1cf0a828ce3ba112694d38e3287d38d8d Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-27virtio: add tx traceMohsin Kazmi1-2/+60
Type: improvement Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: I0b1a1ce085ceb75fe139092e40878566682a7986
2020-06-27tap: remove the bridge configurations for TUN interfaceMohsin Kazmi1-9/+10
Type: fix Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: Ifeae641ec0aa7de74e33e582234505bf6e28ca87
2020-06-24virtio: fix the vlib buffer flagsMohsin Kazmi1-2/+1
Type: fix Change-Id: I92e8e30e4175229e24dd92471016e9095b5cc83e Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-16virtio: add vhost sw_if_index filter for sw_interface_vhost_user_dumpSteven Luong2-3/+6
The filter sw_if_index was in the API sw_interface_vhost_user_dump. But it was never implemented in the backend. This patch is to add the backend, vat, and custom dump support for the filter. Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Iaa41a7e11bfbcbb4c60092375e4b0dcf0950077b
2020-06-12virtio: interface type based improvementsMohsin Kazmi3-75/+142
Type: improvement Change-Id: I220ea6ab609e3c1628f5210be441d0d5e825a32c Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-09tap: enable gso/csum offload for tunMohsin Kazmi1-7/+0
Type: improvement Change-Id: I5b9d5ea192776f14a45bf909acc4bef7793521e8 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-05-29docs: Minor updates to feature.yaml filesJohn DeNisco2-6/+8
Type: docs Signed-off-by: John DeNisco <jdenisco@cisco.com> Change-Id: Iba106d33d34766b91e46980e7237fbdfc3710b8b
2020-05-28tap: fix rx queue indexMohsin Kazmi1-1/+2
Type: fix Change-Id: I5601bdeb47d08118476ff7bd29435d2c1dba34b9 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-05-27ethernet: fix DMAC check and skip unnecessary ones (VPP-1868)John Lo1-1/+1
Fix and optimize DMAC check in ethernet-input node to utilize NIC or driver which support L3 DMAC-filtering mode so that DMAC check can be bypassed safely for interfaces/sub-interfaces in L3 mode. Checking of interface in L3-DMAC-filtering state to avoid DMAC check require the following: a) Fix interface driver init sequence for devices which supports L3 DMAC-filtering to indicate its capability and initialize interface to L3 DMAC-filtering state. b) Fix ethernet_set_flags() function and its associated callback flags_change() functions registered by various drivers in interface infra to provide proper L3 DMAC filtering status. Maintain interface/sub-interface L3 config count so DMAC checks can be bypassed if L3 forwarding is not setup on any main/sub-interfaces. Type: fix Ticket: VPP-1868 Signed-off-by: John Lo <loj@cisco.com> Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
2020-05-05gso: add support for IP-IPMohsin Kazmi2-11/+21
Type: feature Change-Id: I37752af8496e0042a1da91124f3d94216b39ff11 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-05-04misc: binary api fuzz test fixesDave Barach1-1/+1
Add a hook to src/vlibapi/api_shared.c to fuzz (screw up) binary API messages, e.g. by xoring random data into them before processing. We specifically exempt client connection messages, and inband debug CLI messages. We step over msg_id, client index, client context, and sw_if_index. Otherwise, "make test" vectors fail too rapidly to learn anything. The goal is to reduce the number of crashes caused to zero. We're fairly close with this patch. Add vl_msg_api_max_length(void *mp), which returns the maximum plausible length for a binary API message. Use it to hardern vl_api_from_api_to_new_vec(...) which takes an additional argument - message pointer - so it can verify that astr->length is sane. If it's not sane, return a u8 *vector of the form "insane astr->length nnnn\0". Verify array lengths in vl_api_dhcp6_send_client_message_t_handler(...) and vl_api_dhcp6_pd_send_client_message_t_handler(...). Add a fairly effective binary API fuzz hook to the unittest plugin, and modify the "make test" framework.py to pass "api-fuzz { on|off }" to enable API fuzzing: "make API_FUZZ=on TEST=xxx test-debug" or similar Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I0157267652a163c01553d5267620f719cc6c3bde
2020-05-04tap: refactor existing flagsMohsin Kazmi4-17/+30
Type: refactor This patch refactor the existing flags and also add a new flag for packet coalescing. Change-Id: Ic826e4c81313f26d87c475cdf666b06cbed60a3a Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-05-01tap: implement sw_interface_tap_v2_dump filtering by sw_if_indexPaul Vinciguerra3-13/+12
Type: feature Change-Id: I6f607f383dc77a71e8712124f7613b38b4ac065a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-04-30tap: allow deletion of tun interfaceMatthew Smith1-2/+5
Type: improvement tap_delete_if() returns early if the interface type is not VIRTIO_IF_TYPE_TAP. Allow VIRTIO_IF_TYPE_TUN also and take appropriate action for those interfaces. Change-Id: I196b6d6f3f5e1543a14d6be76fd879d44c9794fd Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-04-29devices: vhost: simplify string copies for GCC-10Benoît Ganne1-10/+5
GCC-10 increases string truncations warnings. Refactor string copies confusing it. Type: refactor Change-Id: I9720a0539059de00ab212ff2fc73055f04f5af1d Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-04-29tap: fix missing "num-rx-queues" from cli helpMohsin Kazmi1-6/+6
Type: fix Change-Id: Ib09c7cebb6978b3adc09ac36cb32f7947b143e51 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-04-28tap: use one tap fd per rx queueAloys Augustin3-35/+64
This matches vhost queues to linux netdev queues and avoids random packet shuffling across vhost queues on rx. Change-Id: I9901689d361e440fb0b91c9fbaf8124ce525b316 Type: fix Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2020-04-27virtio: support virtio 1.1 packed ring in vhostSteven Luong8-156/+1604
virtio 1.1 defines a number of new features. Packed ring is among the most notable and important one. It combines used, available, and descripptor rings into one. This patch provides experimental support for packed ring. To avoid regression, when packed ring is configured for the interface, it is branched to a separate RX and TX driver. Non packed ring should continue to perform as it was before. Packed ring is tested using qemu4.2 and ubuntu focal fossa (kernel 5.4.0-12) on the guess VM which supports packed ring. To configure VPP with packed ring, just add the optional keyword "packed" when creating the vhost interface. To bring up the guest VM with packed ring, add "packed=on" in the qemu launch command. To facilitate troubleshooting, also added "verbose" option in show vhost desc CLI to include displaying the indirect descriptors. Known qemu reconnect issue - If VPP is restarted, guest VMs also need to be restarted. The problem is kernel virtio-net-pci keeps track of the previous available and used indices. For virtio 1.0, these indices are in shared memory and qemu can easily copy them to pass to the backend for reconnect. For virio 1.1, these indices are no longer in shared memory. Qemu needs a new mechanism to retrieve them and it is not currently implemented. So when the protocol reconnects, qemu does not have the correct available and used indices to pass to the backend. As a result, after the reconnect, virtio-net-pci is reading the TX ring from the wrong position in the ring, not the same position which the backend is writing. Similar problem exists also in the RX. Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I5afc50b0bafab5a1de7a6dd10f399db3fafd144c
2020-04-27devices: allow link state down with netlinkMatthew Smith1-1/+1
Type: fix Use the up parameter in vnet_netlink_set_link_state(). It was ignoring the parameter and always setting IFF_UP on an interface. Change-Id: I0d44406d982afbdc43bc6b26d0f22c0bdd47abdc Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-04-24virtio: vhost checksum problem for ipv6Steven Luong1-3/+3
When checksum is enable for IPv6, it erroneously set the flag VNET_BUFFER_F_OFFLOAD_IP_CKSUM. That flag is meant for ip4 packets only. Type: fix Ticket: VPP-1857 Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Id03b2937bfa34e2a9b50a36aafe0700bad7fb95e (cherry picked from commit f78294d8468f156e066e7e69aab3a1b285810c3a)
2020-04-22gso: add vxlan tunnel supportMohsin Kazmi2-10/+14
Type: feature Change-Id: I85f6ec77187a4983c66c5e22fd39fbb2cef82902 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-04-17virtio: fix to use chained descriptors when missing indirect descriptorMohsin Kazmi2-7/+79
Some vhost-backed missing the VIRTIO_RING_F_INDIRECT_DESC feature. Previously, vpp doesn't support jumbo frames using chained descriptors. This patch fixes this issue. Type: fix Change-Id: I20487e201e88ea136b556ac84dde058019ab3e78 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-04-17tap: add initial support for tunMohsin Kazmi9-47/+190
Type: feature Change-Id: I699a01ac925fe5c475a36032edb7018618bb4dd4 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-04-10virtio: fix gso and csum offload errors handlingMohsin Kazmi1-45/+82
GSO and CSUM offloaded packets are transmitted even itf doesn't support GSO/CSUM. This patch fixes it by logging the respective errors and dropping the packets. Type: fix Change-Id: I5ab19d15ce6aa9fda515313c313a5a56c0b96837 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-04-08virtio: fix the tcp/udp checksum offloadsMohsin Kazmi2-28/+0
Some vhost-backend calculates the wrong checksum in case of tcp/udp offload when driver resets tcp/udp checksum field to '0'. Type: fix Change-Id: I1d2a9b95b3d5cc1decac38027104a04df2af4680 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-03-31vlib: move pci api types from vnet/pci to vlib/pciJakub Grajciar2-2/+2
Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I1a60809a8bbbbb8ac8b65ab990d51aae1229647f Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-03-30gso: fix the header parser to read onlyMohsin Kazmi2-4/+44
Previously, header parser sets the tcp/udp checksum to 0. It should be read only function for vlib_buffer_t. Type: fix Change-Id: I9c3398372f22998da3df188f0b7db13748303068 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-03-23virtio: vhost gso checksum error when both indirect and mrg_rxbuf are offSteven Luong1-20/+19
Turn on gso, turn off both indirect and mrg_rxbuf caused traffic received and sent with checksum error. The problem is we are not mapping the hdr correctly in the shared memory address. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I7ef3bc2755544167b0e624365988111b17399e89
2020-03-23tap: fix the numa/queue for buffersMohsin Kazmi1-1/+1
Type: fix Change-Id: Ib320171708bebde6d1dae0b2c665f9bcfc9102db Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-03-23virtio: improve error handlingMohsin Kazmi1-9/+30
Type: improvement Change-Id: I134465760272ceb29f85486cba838d8687696bbf Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-03-21virtio: fix link up/down flagMohsin Kazmi1-3/+9
Type: fix "set int state <interface> down" puts the virtio device link down. It will not put the link in "UP" state, when "set int state <interface up>" will be used again to change the interface admin up. This patch fixes it. To test: create tap set int state tap0 up set int state tap0 down sh hardware sh int set int state tap0 up sh int sh hardware Change-Id: I3c0e31539f8a2a1e40220e7fb57eedecf408f067 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-03-21virtio: fix the out of order descriptors in txMohsin Kazmi4-8/+102
Type: fix Some vhost-backends give used descriptors back in out-of-order. This patch fixes the native virtio to handle out-of-order descriptors. Change-Id: I57323303349f6a385e412ee22772ab979ae8edbf Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-03-13devices: netlink create the object if missingDave Barach1-4/+4
Type: fix Fixes: b49bc1a Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I3dd81a2484c8b4925fd07556576c29d1cde337e1
2020-03-05tap: add support for persistanceMohsin Kazmi7-43/+117
Type: feature Change-Id: I775f53531972447ebae0d69b9e2dfeee84d115e5 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-03-02virtio: fix the coverity warningMohsin Kazmi1-4/+1
Type: fix Change-Id: Ia75edb74eb7c746dd4c66bdbff75efb949575ce4 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-02-26api: improve api string safetyJakub Grajciar1-1/+1
- Remove vl_api_from_api_string to prevent use of not nul-terminated strings. - Rename vl_api_from_api_to_vec -> vl_api_from_api_to_new_vec to imply a new vector is created. NOT nul terminated. - Add vl_api_from_api_to_new_c_string. Returns nul terminated string in a new vector. - Add vl_api_c_string_to_api_string. Convert nul terminated string to vl_api_string_t - Add vl_api_vec_to_api_string. Convert NON nul terminated vector to vl_api_string_t Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Iadd59b612c0d960a34ad0dd07a9d17f56435c6ea Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-02-18devices: netlink: add more error loggingMohsin Kazmi1-10/+50
Type: improvement Change-Id: I4d8ca04840845e1ba631e4260e155df2486155e6 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-02-15tap: fix the default parameter for num_rx_queuesMohsin Kazmi1-9/+3
Type: fix Change-Id: I1a20fea56f1ba1fada7c7ce96ea333bf097b1273 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-02-04virtio: update FEATURE.yaml to include description for vhost-userSteven Luong1-3/+7
Add features supported by vhost-user Type: docs Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Iba4c5244c40324b603e2803ade8ecc0816326de8
2020-02-03virtio: vhost gso is broken in some topologySteven Luong1-2/+8
Recent modification added a call to vnet_gso_header_offset_parser in the beginning of vhost_user_handle_tx_offload. The former routine may set tcp or udp->checksum to 0. While it is appropriate to set it to 0 for the GSO packet, it is broken and causes checksum error if the aformentiooned routine is called by a non-GSO packet. The fix is to not call vhost_user_handle_tx_offload if the buffer does not indicate checksum offload is needed. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I6e699d7a40b7887ff149cd8f77e8f0fa9374ef19
2020-01-30misc: deprecate netmap and ixge driversDamjan Marion10-2148/+0
Both are out of sync for long time... Type: refactor Change-Id: I7de3170d35330fc172501d87655dfef91998b8fe Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-01-30tap: fix host mtu configuration settingMohsin Kazmi1-12/+13
host mtu can't be set if tap interface is in namespace. This patch fixes this issue. Type: fix Change-Id: I63811c4b56c708fe708061a8afbaec41994f08ca Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-01-30tap: fix the host mac addressMohsin Kazmi3-20/+11
Tap configuration code sets the host mac address two time. This patch fixes it. Type: fix Change-Id: I7bebb9b7f25352a8a9a98bae6a0636757c0cea9c Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-01-27devices: vhost: fix data offset on inputBenoît Ganne1-11/+1
Regardless of whether the virtio_net_hdr is sent as a separate descriptors or in the same descriptor as the data, we always want to skip the header length - maybe moving to the next descriptor along the way. Type: fix Change-Id: Iaa70aeb310e589639b20f8c7029aaa8d3ce5d307 Signed-off-by: Benoît Ganne <bganne@cisco.com>