summaryrefslogtreecommitdiffstats
path: root/src/vnet/dhcp/dhcp6_proxy_node.c
AgeCommit message (Collapse)AuthorFilesLines
2019-08-15vlib: copy trace_handle in vlib_buffer_copy/clone() functionsJohn Lo1-1/+0
Since vlib_buffer_copy() and vlib_buffer_clone() both preserve VLIB_BUFFER_IS_TRACED bit in flags field, it should also copy trace_handle which would add minimal overhead. Thus, callers of these functions do not have to call vlib_buffer_copy_trace_flags() to copy trace_handle. Type: refactor Signed-off-by: John Lo <loj@cisco.com> Change-Id: Iff6a3f81660dd62b36a2966033eb380305340310
2019-06-18fib: fib api updatesNeale Ranns1-3/+3
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-02-18DHCP: trace flags copied from old to new not vice-versaNeale Ranns1-1/+1
Change-Id: I6c13af7e97753da013cdd5b212302d008cbd616d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-09buffers: fix typoDamjan Marion1-1/+1
Change-Id: I4e836244409c98739a13092ee252542a2c5fe259 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-02-06buffers: make buffer data size configurable from startup configDamjan Marion1-1/+1
Example: buffers { default data-size 1536 } Change-Id: I5b4436850ca18025c9fdcfc7ed648c2c2732d660 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-20buffers: don't init metadata, as it is already initializedDamjan Marion1-4/+1
Change-Id: Ia083050389853c25b069f0f8286d50d3f4aef527 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-19buffers: remove free-list information from buffer metadataDamjan Marion1-3/+2
Change-Id: I6048c6a51efa826ac333f7d15919cb87dd766d74 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-29DHCP: Initialise trace for copied buffers.Ole Troan1-0/+2
DHCP tests failed intermittantly with a core dump. Let's see if this fixes it. Change-Id: I42829a2c7e7f5a9a6775330d37bf972ff0008210 Signed-off-by: Ole Troan <ot@cisco.com>
2018-10-23c11 safe string handling supportDave Barach1-3/+3
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-06-08Implement DHCPv6 PD client (VPP-718, VPP-1050)Juraj Sloboda1-11/+18
Change-Id: I72a1ccdfdd5573335ef78fc01d5268934c73bd31 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-02-12Fix DHCP client crash with worker threadsMatthew Smith1-1/+1
Crash occurring With a worker thread configured and dhcp client active on an interface. When a DHCP reply packet is received, call to ethernet_get_main() from dhcp_proxy_to_client_input() was causing a crash. Replaced with a call to vnet_get_ethernet_main(). Once that was resolved, calling dhcp_client_acquire_address() from a worker thread also caused a crash. Changed so the main thread will do the address/route configuration. Change-Id: Ib23984787102dea8cf6cfcde86188a751f15c1e1 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-12-09VPP-249 Coding standards cleanup - vnet/vnet/dhcpkhemendra kumar1-622/+660
Change-Id: I45a166b5780675d2bc6fe90595f413725704eaa8 Signed-off-by: khemendra kumar <khemendra.kumar13@gmail.com>
2017-11-16Add Support of DHCP VSS Type 0 where VPN-ID is ASCIIJohn Lo1-50/+47
Enhence support of DHCP VSS (Virtual Subnet Selection) to include VSS type 0 where VSS info is a NVT (Network Virtual Terminal) ASCII VPN ID where the ASCII string MUST NOT be terminated with a zero byte. Existing code already support VSS type 1, where VSS information is a RFC 2685 VPN-ID of 7 bytes with 3 bytes OUI and 4 bytes VPN index, and VSS type 255 indicating global VPN. Change-Id: I54edbc447c89a2aacd1cc9fc72bd5ba386037608 Signed-off-by: John Lo <loj@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-4/+5
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-08L2 over MPLSNeale Ranns1-1/+1
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-14Introduce l{2,3,4}_hdr_offset fields in the buffer metadataDamjan Marion1-1/+1
To save space in the first cacheline following is changed: - total_length_not_including_first_buffer moved to the 2nd cacheline. This field is used only when VLIB_BUFFER_TOTAL_LENGTH_VALID and VLIB_BUFFER_NEXT_PRESENT are both set. - free_list_index is now stored in 4bits inside flags, which allows up to 16 free lists. In case we need more we can store index in the 2nd cachelin Change-Id: Ic8521350819391af470d31d3fa1013e67ecb7681 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-24IPv6 Performance bugsNeale Ranns1-4/+5
- inline the FIB lookup function; this requires access to the bihash, so for files that use more than one type this casues problems. those files that include ip6_fib.h unnecessarily have been updated - better use of the feature arcs. ip6-lookup and interface-output are now sentinels (end-node-index in the cm speak) rather than enabled features. Change-Id: I9d1375fee63f7dbb2d327da6124d8e60b63367ec Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-0/+1
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-07DHCP Multiple Servers (VPP-602, VPP-605)Neale Ranns1-40/+118
Multiple DHCP (4 and/or 6) servers can be added and removed through multiple calls to the 'set dhcp server' API. All 4/6/ discover/solicit messages will then be replicated to all servers in the list. The expectation is that the servers/system is configured in such a way that this is viable. If VSS information is providied for the clinet VRF which also has multiple servers configured, then the same VSS information is sent to each server. Likewise the source address of packets sent to from VPP to each server is the same. Change-Id: I3287cb084c84b3f612b78bc69cfcb5b9c1f8934d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-04DHCPv6 - Be consistent with the use of MFIB index as the RX FIB index for ↵Neale Ranns1-4/+5
DHCPv6. For the same table ID, the unicast-FIB index is not necessarily the same value as the multicast-FIB index, since features (like LISP, SR) can create unicast-tables, and thus affect only the index of the unicast FIBs Change-Id: Ibfa334d7eda822f742c241b7ce69a6271b4753a9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-16Consolidate DHCP v4 and V6 implementation. No functional change intendedNeale Ranns1-0/+1065
The DHCP proxy and VSS information maintained by VPP is the same for v4 and v6, so we can manage this state using the same code. Packet handling is cleary different, so this is kept separate. Change-Id: I10f10cc1f7f19debcd4c4b099c6de64e56bb0c69 Signed-off-by: Neale Ranns <nranns@cisco.com>