aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/dhcp
AgeCommit message (Collapse)AuthorFilesLines
2019-08-20vppapigen: remove support for legacy typedefsPaul Vinciguerra1-6/+6
vppapigen has remapped legacy to typedefs behind the scenes for some time now. - update .api files to use new style typedefs. - issue error on 'typeonly define' in .api files - remove unneeded macros redefining vl_noop_handler Type: refactor Change-Id: I7a8c4a6dafacee6a131f95cd0e9b03a8c60dea8b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-08-15vlib: copy trace_handle in vlib_buffer_copy/clone() functionsJohn Lo2-2/+0
Since vlib_buffer_copy() and vlib_buffer_clone() both preserve VLIB_BUFFER_IS_TRACED bit in flags field, it should also copy trace_handle which would add minimal overhead. Thus, callers of these functions do not have to call vlib_buffer_copy_trace_flags() to copy trace_handle. Type: refactor Signed-off-by: John Lo <loj@cisco.com> Change-Id: Iff6a3f81660dd62b36a2966033eb380305340310
2019-07-26dhcp ip: DSCP settings for transmitted DHCP packetsNeale Ranns4-9/+37
Type: feature - Define the ip_dscp_t and use in the IP headers - Add DSCP setting to the DHCP client for use with packet TX Change-Id: If220dde0017ea78793747d65f53e11daf23a28fa Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-26dhcp: send unicast and broadcast packets via the IP adjacencyNeale Ranns3-39/+53
Type: feature this means DHCP packets are subject to the IP features configured on the interface - the unicast packets already were sent throught the adj - added UT for DHCP client sending a unicast renewal Change-Id: Id50db0b71822f44bf7cb639a524195cdc9873526 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns1-3/+3
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-13Fix VPP-1528 get the same IP address from DHCP server for two VPP DHCP clientsjackiechen19852-4/+2
Change-Id: I18dfe51000758f44b991d2dd065c9aa2bc5863d5 Signed-off-by: jackiechen1985 <xiaobo.chen@tieto.com>
2019-05-07Fix af_packet issues:jackiechen19851-2/+3
1. Fix af_packet memory leak; 2. Fix close socket twice; 3. Adjust debug log for syscall; 4. Adjust dhcp client output log; Change-Id: I96bfaef16c4fad80c5da0d9ac602f911fee1670d Signed-off-by: jackiechen1985 <xiaobo.chen@tieto.com>
2019-05-06Fix VPP-1487 DHCP client does not support option 6-domain serverjackiechen19854-7/+45
Change-Id: I36ad1ef2a53af3d3f3a6348bc189b17e9e4e21bd Signed-off-by: jackiechen1985 <xiaobo.chen@tieto.com>
2019-03-29dhcp: only register UDP ports that are neededMatthew Smith3-12/+21
When configuring a DHCP client, both the UDP ports for DHCP client and server are registered. Packets to the server port end up being dropped unless you have also configured a DHCP proxy. This breaks a common home/office gateway use case where the WAN interface gets configured using a DHCP client and devices attached to a LAN interface attempt to configure themselves using DHCP. If you try to punt to an external DHCP daemon to handle the LAN client requests, the packets never make it to the external daemon because of the server port being registered. Modify dhcp_maybe_register_udp_ports() to accept a parameter that controls which ports get registered. For a DHCP client, only the client port is registered. For a DHCP proxy, both client and server ports are registered. Change-Id: I2182d9827e4c7424b03ebb94952c3d2dc37abdb6 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra5-6/+6
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-13deprecate VLIB_NODE_FUNCTION_MULTIARCHFilip Tehlar1-7/+3
Change-Id: I403173846bc5b1bbbe2a2c41225b0f666f851cb9 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-07parse ethernet header in ct6_in2outDave Barach1-7/+14
fix a debug CLI scripting bug: cp_ip6_address_add_del_command_function ate any subsequent commands, yielding indigestion. Change-Id: Iaca7bed5687759da36ae91dc658e758549b71796 Signed-off-by: Dave Barach <dave@barachs.net>
2019-03-04Fix 2x overconsumption of debug cli input bugsDave Barach2-9/+20
Change-Id: I658489dc9cf437ff43d9c69a896c9fe4e01ec38e Signed-off-by: Dave Barach <dave@barachs.net>
2019-02-25buffer chain linearizationKlement Sekera1-3/+10
Rewrite vlib_buffer_chain_linearize function so that it works as intended. Linearize buffer chains coming out of reassembly to work around some dpdk-tx issues. Note that this is not a complete workaround as a sufficiently large packet will still cause the resulting chain to be too long. Drop features from reassembly code which relies on knowing which and how many buffers were freed during linearization, buffer counts and tracing capabilities for these cases. Change-Id: Ic65de53ecb5c78cd96b178033f6a576ab4060ed1 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-02-18DHCP: trace flags copied from old to new not vice-versaNeale Ranns2-2/+2
Change-Id: I6c13af7e97753da013cdd5b212302d008cbd616d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-09buffers: fix typoDamjan Marion1-1/+1
Change-Id: I4e836244409c98739a13092ee252542a2c5fe259 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-02-06buffers: make buffer data size configurable from startup configDamjan Marion1-1/+1
Example: buffers { default data-size 1536 } Change-Id: I5b4436850ca18025c9fdcfc7ed648c2c2732d660 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-20buffers: don't init metadata, as it is already initializedDamjan Marion1-4/+1
Change-Id: Ia083050389853c25b069f0f8286d50d3f4aef527 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-19buffers: remove free-list information from buffer metadataDamjan Marion1-3/+2
Change-Id: I6048c6a51efa826ac333f7d15919cb87dd766d74 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-29DHCP: Initialise trace for copied buffers.Ole Troan2-0/+4
DHCP tests failed intermittantly with a core dump. Let's see if this fixes it. Change-Id: I42829a2c7e7f5a9a6775330d37bf972ff0008210 Signed-off-by: Ole Troan <ot@cisco.com>
2018-11-20dhcp4:(VPP-1483) linearize chained packets before handlingEyal Bari2-53/+54
dhcp packets might (when flooded) arrive in chains of cloned buffers Change-Id: Ifddecd656b6a5d6ba8cd94184f5c021684e35548 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-10-23dns, dhcp: on-demand udp port registrationDave Barach3-5/+33
Change-Id: I8bf411adc6c5f4caa349d161174b544d2de3ad1d Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-23c11 safe string handling supportDave Barach9-17/+17
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-19Remove unused argument to vlib_feature_nextDamjan Marion1-10/+5
Change-Id: Ieb8b53977fc8484c19780941e232ee072b667de3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-10VPP-1337: Dangling reference be gone!Dave Barach3-0/+6
Freeing the prefix and address vectors after signalling them from dhcpv6_client_node_fn to either the pd or iana report processes is absolutely wrong. The code has appeared to work by luck. This took three full days' worth of expert effort to root cause - in the context of an unrelated patch - and about one minute to fix. Change-Id: Ie589ab1a70ae83441ab4e8b6618a6d405741f53f Signed-off-by: Dave Barach <dave@barachs.net>
2018-06-21Implement DHCPv6 IA NA client (VPP-1094)Juraj Sloboda12-537/+2502
Change-Id: I682a47d6cf9975aca6136188d28ee93eaadf4fe3 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-06-15Update DHCPv6 DUID code and fix coverity warningsJuraj Sloboda5-39/+85
- Generate client DUID only when DHCPv6 PD feature is enabled - Change client DUID type from DUID-LLT to DUID-LL - Fix coverity warnings Change-Id: I20e518fc9a1c5f3f7ea9add7e7e03a487c99e978 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-06-08Implement DHCPv6 PD client (VPP-718, VPP-1050)Juraj Sloboda9-42/+3033
Change-Id: I72a1ccdfdd5573335ef78fc01d5268934c73bd31 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-06-07DHCP Client DumpNeale Ranns4-60/+231
- use types on the DHCP API so that the same data is sent in comfing messages and in dumps - add the DHCP client dump API - update VOM to refelct API changes - rename VOM class dhcp_config* dhcp_client* - the VOM dhcp_client class maintains the lease data (which it reads on a dump) for clients to read Change-Id: I2a43463937cbd80c01d45798e74b21288d8b8ead Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-05-27VPP-1294: add missing feature arc constraintDave Barach2-5/+21
the ip4-dhcp-client-detect feature MUST run prior to nat44-out2in, or inbound dhcp broadcast packets will be dropped. Certain dhcp servers answer lease renewal dhcp-request packets with broadcast dhcp-acks, leading to unrecoverable lease loss. In detail, this constraint: VNET_FEATURE_INIT (ip4_snat_out2in, static) = { .arc_name = "ip4-unicast", .node_name = "nat44-out2in", .runs_after = VNET_FEATURES ("acl-plugin-in-ip4-fa"), }; doesn't get the job done: ip4-unicast: [17] nat44-out2in [23] ip4-dhcp-client-detect [26] ip4-not-enabled Add a proper constraint: VNET_FEATURE_INIT (ip4_snat_out2in, static) = { .arc_name = "ip4-unicast", .node_name = "nat44-out2in", .runs_after = VNET_FEATURES ("acl-plugin-in-ip4-fa", "ip4-dhcp-client-detect"), }; and the interface feature order is OK, at least in this regard: ip4-unicast: [17] ip4-dhcp-client-detect [18] nat44-out2in [26] ip4-not-enabled We need to carefully audit (especially) the ip4-unicast feature arc, which has [gasp] 37 features on it! Change-Id: I5e749ead7ab2a25d80839a331de6261e112977ad Signed-off-by: Dave Barach <dave@barachs.net>
2018-05-10DHCP4 client process replies when renewing leaseMatthew Smith1-16/+24
When a DHCP client is in the bound state, it wakes up halfway through it's lease (by default) to try and renew the lease. The ip4-dhcp-client-detect is not enabled as a feature at this point, so replies sent from the DHCP server do not get applied to the lease. Eventually the lease expires, the address is removed from the interface, a new discovery is performed and the same address is added back to the interface. Before sending a request to renew in the bound state, enable the feature to process the reply. Change-Id: I95332ee0596f47df6f3c8bf8e3f0698dde9a1fc5 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-03-23Drop dhcp pkts w/ hardware address mismatchesDave Barach2-11/+40
Add a few dhcp client rx packet/state counters Temporarily disable the dhcp client unit test, since it trips over the newly-added hardware address check. Change-Id: I7f68607e6ed3d738cba357c3fe76664a99b71cd8 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-21VPP_1202: handle DHCP NAK packetsDave Barach2-1/+28
Change-Id: I469a734747099cef2d135d77e4db0244e24bf0bc Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-03-06API: Add service definitions for events and singleton messages (second attempt)Marek Gradzki1-0/+4
Based on https://gerrit.fd.io/r/#/c/10920/ Updates service definition in stats.api with correct reply message names. Change-Id: I3282bee5304e667e23bc1fab3f43d967a50d880d Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2018-03-05Revert "API: Add service definitions for events and singleton messages."Ole Trøan1-4/+0
This reverts commit f7b7fa53b7eaec81d8c00c1023fb7d01f1f9761f. Change-Id: I87496342943248e94f01ada31459f387c0a3a610 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-05API: Add service definitions for events and singleton messages.Ole Troan1-0/+4
Change-Id: I7de987c30b263d43521e6280c5273f30b5f6e11c Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-14Reenable dhcp client detect when lease expiresDave Barach1-1/+50
We disable the client detect feature when we bind a DHCP address. Turn it back on again when the lease expires. Otherwise, if the DHCP server replies after an outage, we'll never see the reply. Add dhcp packet tx counters, by packet type Change-Id: Id54b05647d5d7bd8d3ab99e6584ee86d9e4ff7f9 Signed-off-by: Dave Barach <dave@barachs.net>
2018-02-12Fix DHCP client crash with worker threadsMatthew Smith3-51/+56
Crash occurring With a worker thread configured and dhcp client active on an interface. When a DHCP reply packet is received, call to ethernet_get_main() from dhcp_proxy_to_client_input() was causing a crash. Replaced with a call to vnet_get_ethernet_main(). Once that was resolved, calling dhcp_client_acquire_address() from a worker thread also caused a crash. Changed so the main thread will do the address/route configuration. Change-Id: Ib23984787102dea8cf6cfcde86188a751f15c1e1 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-01-31Improved tracing for the IP[46] not-enabled case.Neale Ranns1-1/+1
now we get 00:00:03:665501: pg-input ... 00:00:03:665681: ethernet-input ... 00:00:03:665691: ip6-input UDP: 2001::1 -> ffef::1 tos 0x00, flow label 0x0, hop limit 64, payload length 108 UDP: 1234 -> 1234 length 108, checksum 0x7b25 00:00:03:665695: ip6-not-enabled UDP: 2001::1 -> ffef::1 tos 0x00, flow label 0x0, hop limit 64, payload length 108 UDP: 1234 -> 1234 length 108, checksum 0x7b25 00:00:03:665706: error-drop ethernet-input: no error Same goes for IPv4 Change-Id: Ia360df39b43281d3a0aa1b686f04b73cfa37c546 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-23For DHCP client configuration control the setting of the broadcast flag in theNeale Ranns5-100/+397
DISCOVER message sent. According to RFC2131: In the case of a client using DHCP for initial configuration (before the client's TCP/IP software has been completely configured), DHCP requires creative use of the client's TCP/IP software and liberal interpretation of RFC 1122. The TCP/IP software SHOULD accept and forward to the IP layer any IP packets delivered to the client's hardware address before the IP address is configured; DHCP servers and BOOTP relay agents may not be able to deliver DHCP messages to clients that cannot accept hardware unicast datagrams before the TCP/IP software is configured. To work around some clients that cannot accept IP unicast datagrams before the TCP/IP software is configured as discussed in the previous paragraph, DHCP uses the 'flags' field [21]. The leftmost bit is defined as the BROADCAST (B) flag. The semantics of this flag are discussed in section 4.1 of this document. The remaining bits of the flags field are reserved for future use. They MUST be set to zero by clients and ignored by servers and relay agents. Figure 2 gives the format of the 'flags' field. this changes means VPP conforms to the: "SHOULD accept and forward to the IP layer any IP packets delivered to the client's hardware address before the IP address is configured" with the caveat that VPP allows DHCP packets destined to the stanard client DHCP port to be delivered. With this enhancement the control-plane is now able to choose the setting of the broadcast flag. Change-Id: Ia4eb2c9bb1e30c29f9192facc645e9533641955a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-23VPPAPIGEN: vppapigen replacement in Python PLY.Ole Troan1-1/+1
This is a version of the VPP API generator in Python PLY. It supports the existing language, and has a plugin architecture for generators. Currently C and JSON are supported. Changes: - vl_api_version to option version = "major.minor.patch" - enum support - Added error checking and reporting - import support (removed the C pre-processor) - services (tying request/reply together) Version: option version = "1.0.0"; Enum: enum colours { RED, BLUE = 50, }; define foo { vl_api_colours_t colours; }; Services: service { rpc foo returns foo_reply; rpc foo_dump returns stream foo_details; rpc want_stats returns want_stats_reply events ip4_counters, ip6_counters; }; Future planned features: - unions - bool, text - array support (including length) - proto3 output plugin - Refactor C/C++ generator as a plugin - Refactor Java generator as a plugin Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf Signed-off-by: Ole Troan <ot@cisco.com>
2018-01-11api: remove transport specific code from handlersFlorin Coras1-11/+11
This does not update api client code. In other words, if the client assumes the transport is shmem based, this patch does not change that. Furthermore, code that checks queue size, for tail dropping, is not updated. Done for the following apis: Plugins - acl - gtpu - memif - nat - pppoe VNET - bfd - bier - tapv2 - vhost user - dhcp - flow - geneve - ip - punt - ipsec/ipsec-gre - l2 - l2tp - lisp-cp/one-cp - lisp-gpe - map - mpls - policer - session - span - udp - tap - vxlan/vxlan-gpe - interface VPP - api/api.c OAM - oam_api.c Stats - stats.c Change-Id: I0e33ecefb2bdab0295698c0add948068a5a83345 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-09api: refactor vlibmemoryFlorin Coras1-3/+3
- separate client/server code for both memory and socket apis - separate memory api code from generic vlib api code - move unix_shared_memory_fifo to svm and rename to svm_fifo_t - overall declutter Change-Id: I90cdd98ff74d0787d58825b914b0f1eafcfa4dc2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-12-09VPP-249 Coding standards cleanup - vnet/vnet/dhcpkhemendra kumar8-2035/+2085
Change-Id: I45a166b5780675d2bc6fe90595f413725704eaa8 Signed-off-by: khemendra kumar <khemendra.kumar13@gmail.com>
2017-11-16Add Support of DHCP VSS Type 0 where VPN-ID is ASCIIJohn Lo7-185/+241
Enhence support of DHCP VSS (Virtual Subnet Selection) to include VSS type 0 where VSS info is a NVT (Network Virtual Terminal) ASCII VPN ID where the ASCII string MUST NOT be terminated with a zero byte. Existing code already support VSS type 1, where VSS information is a RFC 2685 VPN-ID of 7 bytes with 3 bytes OUI and 4 bytes VPN index, and VSS type 255 indicating global VPN. Change-Id: I54edbc447c89a2aacd1cc9fc72bd5ba386037608 Signed-off-by: John Lo <loj@cisco.com>
2017-10-24Add extern to *_main global variable declarations in header files.Dave Wallace1-1/+1
- Global variables declared in header files without the use of the 'extern' keword will result in multiple instances of the variable to be created by the compiler -- one for each different source file in which the the header file is included. This results in wasted memory allocated in the BSS segments as well as potentially introducing bugs in the application. Change-Id: I6ef1790b60a0bd9dd3994f8510723decf258b0cc Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-10-09vppapigen: support per-file (major,minor,patch) version stampsDave Barach1-0/+2
Add one of these statements to foo.api: vl_api_version 1.2.3 to generate a version tuple stanza in foo.api.h: /****** Version tuple *****/ vl_api_version_tuple(foo, 1, 2, 3) Change-Id: Ic514439e4677999daa8463a94f948f76b132ff15 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Ole Troan <ot@cisco.com>
2017-09-20Fix DHCP client so it works for worker threadsJohn Lo1-2/+14
Fix dhcp_client_for_us() function to utilize rpc_call_main_thread to call vlib_process_signal_event() to ensure proper handling irrespective of it being called in main thread or worker thread. Added ASSERT to vlib_process_sinal.. path to make sure it is called in main thread. Change-Id: I4109cc049d8e4225d896ce492ce201011dc9c911 Signed-off-by: John Lo <loj@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns3-16/+21
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-08L2 over MPLSNeale Ranns2-4/+4
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>