summaryrefslogtreecommitdiffstats
path: root/src/vnet/dhcp
AgeCommit message (Collapse)AuthorFilesLines
2017-09-11FIB table add/delete APINeale Ranns3-16/+21
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-08L2 over MPLSNeale Ranns2-4/+4
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-03DHCP Client: receive unicast ACKsNeale Ranns1-1/+78
despite VPP DHCP client setting neither ciaddr nor giaddr and setting the broadcast bit (see RFC 2131 section 4.1) some DHCP servers will still send a unicast DCHPACK. So as not to drop this VPP must have both 1) a receive FIB entry for the OFFERED IP adress and 2) a 'don't drop me because of uRPF' FIB entry for the DHCP server's address. Change-Id: I167d858deb45629318cbdccf5bf67d971730a42f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-18DHCP client option 61 "client_id"Neale Ranns4-2/+19
the existing seeting of client_id to a VPP version number was unused and so overridden Change-Id: If9ebea936336f1fcca8d07e67186c95f8f8f0ccd Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-18DHCP client - remove interface address when DHCP de-configuredNeale Ranns1-0/+1
Change-Id: I63c59e3c13859b51999d283774f7783ef0a6a5ed Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-14Introduce l{2,3,4}_hdr_offset fields in the buffer metadataDamjan Marion2-2/+2
To save space in the first cacheline following is changed: - total_length_not_including_first_buffer moved to the 2nd cacheline. This field is used only when VLIB_BUFFER_TOTAL_LENGTH_VALID and VLIB_BUFFER_NEXT_PRESENT are both set. - free_list_index is now stored in 4bits inside flags, which allows up to 16 free lists. In case we need more we can store index in the 2nd cachelin Change-Id: Ic8521350819391af470d31d3fa1013e67ecb7681 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-06DHCP complete event sends mask lengthNeale Ranns3-3/+7
Change-Id: I4a529dfab5d0ce6b0bbc0ccbbd89c6b109dbf917 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-24IPv6 Performance bugsNeale Ranns1-4/+5
- inline the FIB lookup function; this requires access to the bihash, so for files that use more than one type this casues problems. those files that include ip6_fib.h unnecessarily have been updated - better use of the feature arcs. ip6-lookup and interface-output are now sentinels (end-node-index in the cm speak) rather than enabled features. Change-Id: I9d1375fee63f7dbb2d327da6124d8e60b63367ec Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-28Fix hostname fencepost error in dhcp_compl_event_callback.Jon Loeliger1-2/+4
Hostnames are limited to 63 characters and a NUL terminator. Change-Id: Ie1724d83675cca5e8cdfcd99d8e56e530a044d5d Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-04-25"autoreply" flag: autogenerate standard xxx_reply_t messagesDave Barach1-34/+4
Change-Id: I72298aaae7d172082ece3a8edea4217c11b28d79 Signed-off-by: Dave Barach <dave@barachs.net>
2017-04-13Remove unsed parameter from fib_table_entry_special_add() (only used in FIB ↵Neale Ranns2-4/+2
tests). The DPO was incorrectly initialised with FIB_PROTO_MAX Change-Id: I962df9e162e4dfb6837a5ce79ea795d5ff2d7315 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-0/+1
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-07DHCP Multiple Servers (VPP-602, VPP-605)Neale Ranns8-176/+432
Multiple DHCP (4 and/or 6) servers can be added and removed through multiple calls to the 'set dhcp server' API. All 4/6/ discover/solicit messages will then be replicated to all servers in the list. The expectation is that the servers/system is configured in such a way that this is viable. If VSS information is providied for the clinet VRF which also has multiple servers configured, then the same VSS information is sent to each server. Likewise the source address of packets sent to from VPP to each server is the same. Change-Id: I3287cb084c84b3f612b78bc69cfcb5b9c1f8934d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-04DHCPv6 - Be consistent with the use of MFIB index as the RX FIB index for ↵Neale Ranns3-18/+76
DHCPv6. For the same table ID, the unicast-FIB index is not necessarily the same value as the multicast-FIB index, since features (like LISP, SR) can create unicast-tables, and thus affect only the index of the unicast FIBs Change-Id: Ibfa334d7eda822f742c241b7ce69a6271b4753a9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-02Clean up binary api message handler registration issuesDave Barach1-8/+0
Removed a fair number of "BUG" message handlers, due to conflicts with actual message handlers in api_format.c. Vpp itself had no business receiving certain messages, up to the point where we started building in relevant code from vpp_api_test. Eliminated all but one duplicate registration complaint. That one needs attention from the vxlan team since the duplicated handlers have diverged. Change-Id: Iafce5429d2f906270643b4ea5f0130e20beb4d1d Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-01VPP-598: tcp stack initial commitDave Barach1-1/+1
Change-Id: I49e5ce0aae6e4ff634024387ceaf7dbc432a0351 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-16Consolidate DHCP v4 and V6 implementation. No functional change intendedNeale Ranns12-471/+1957
The DHCP proxy and VSS information maintained by VPP is the same for v4 and v6, so we can manage this state using the same code. Packet handling is cleary different, so this is kept separate. Change-Id: I10f10cc1f7f19debcd4c4b099c6de64e56bb0c69 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-21dhcp: multiple additionsNeale Ranns7-410/+485
DHCP additions: 1) DHCPv4 will only relay a message back to the client, if the Option82 information is present. So make this the default. 2) It is no longer possible to select via the API to "insert circuit ID" - since this is now default 3) Remove the version 2 API since it's now the same as version 1. 4) Adding the VSS option is now conditional only on the presence of VSS config (not the 'insert' option in the set API) 5) DHCP proxy dump via API Change-Id: Ia7271ba8c1d4dbf34a02c401d268ccfbb1b74f17 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-26DHCPv[46] proxy testsNeale Ranns1-1/+29
Change-Id: I6aaf9c602cd515ed9d4416d286f9191d048c1a87 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-26API refactoring : dhcpPavel Kotucek2-0/+419
Change-Id: I3829835ed2126e51e96690c907deac623dc77151 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion6-0/+2446
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>