aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/dpo/dpo.c
AgeCommit message (Collapse)AuthorFilesLines
2017-11-09BIERNeale Ranns1-0/+1
- see draft-ietf-bier-mpls-encapsulation-10 - midpoint, head and tail functions - supported payload protocols; IPv4 and IPv6 only. Change-Id: I59d7363bb6fdfdce8e4016a68a9c8f5a5e5791cb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-25L3 proxy FIB source for container networkingAndrew Yourtchenko1-0/+13
Change-Id: I4164c4c19c8dbfd73e6ddf94a12056325cc093b9 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-10-05Distributed Virtual Router SupportNeale Ranns1-0/+2
A distributed virtual router works by attmpeting to switch a packet, but on failing to find a local consumer (i.e. the packet is destined to a locally attached host) then the packet is sent unmodified 'upstream' to where the rest of the 'distributed' router is present. When L3 switching a packet this means the L2 header must not be modifed. This patch adds a 'l2-bridge' object to the L3 FIB which re-injects packets from the L3 path back into the L2 path - use with extreme caution. Change-Id: I069724eb45956647d7980cbe40a80a788ee6ee82 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-21PPPoE usses a midchain adjacency stack on an interface-tx DPONeale Ranns1-42/+65
1) introduce an interface-tx DPO. This is a simple wrapper around a sw_if_index. enhance DPO stacking functions to allow per-instance next-nodes and hence allow children to stack onto the interface per-instance tx node and not on 'interface-output'. 2) update PPPoE code to use ta midchain stack on a interface-tx DPO of the encap-interface. This remove the need for pppoe_encap node (which is replaced by the adj-midchain-tx) and interface-output node is no longer used (see above). Since PPPoE encap node is no longer needed, the PPPoE seesion does not need to be retrieved in the data-path, hence the cahce misses are removed. Change-Id: Id8b40f53daa14889a9c51d802e14fed7fba4399a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-08L2 over MPLSNeale Ranns1-0/+19
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-30VPP debug image with worker threads hit assert on adding IP route with ↵Neale Ranns1-1/+16
traffic (VPP-892) When stacking DPOs the VLIB graph is also updated to add the edge between the nodes, if this edge does not yet exist. This addition should be done with the workers stopped. Change-Id: I327e4d7d26f0b23eb280f17e4619ff2093ff7940 Signed-off-by: Neale Ranns <nranns@cisco.com> (cherry picked from commit c02bd03ddf5eec9e9c79811360685f13e4ba8ee1)
2017-05-23Labelled attached paths via an MPLS tunnelNeale Ranns1-0/+3
Change-Id: Ic86617c9c3217122043656ce2ea70bb106df5b2d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-0/+10
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-13Basic support for LISP-GPE encapsulated NSH packetsFlorin Coras1-0/+2
Change-Id: I97fedb0f70dd18ed9bbe985407cc5fe714e8a2e2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns1-0/+2
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+500
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>