aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/dpo
AgeCommit message (Collapse)AuthorFilesLines
2019-08-29ip: remove unused function parameterSimon Zhang1-3/+3
Type: refactor Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com> Change-Id: I8674ff5f6f6336b256b7df8187afbb36ddef71fb
2019-08-15vlib: copy trace_handle in vlib_buffer_copy/clone() functionsJohn Lo1-4/+1
Since vlib_buffer_copy() and vlib_buffer_clone() both preserve VLIB_BUFFER_IS_TRACED bit in flags field, it should also copy trace_handle which would add minimal overhead. Thus, callers of these functions do not have to call vlib_buffer_copy_trace_flags() to copy trace_handle. Type: refactor Signed-off-by: John Lo <loj@cisco.com> Change-Id: Iff6a3f81660dd62b36a2966033eb380305340310
2019-07-24fib: Support the POP of a Psuedo Wire Control WordNeale Ranns4-0/+399
Type: feature Change-Id: Ib24547a7c4c73ceb5383d1ca8f14ec40e6a90f01 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-26fib: default flow hash config for each DPO protocol typeNeale Ranns2-0/+23
Type: fix Fixes: 59fa121f Change-Id: I9eb4fe1612734e54932228527c37bf33b705dbdb Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns1-7/+23
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-06DVR: Control the reinject as L2 or L3 based on the output interface typeNeale Ranns2-10/+83
Change-Id: Ib4cdbe8a6a1d10a643941c13aa0acbed410f876c Type: Feature Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-16init / exit function orderingDave Barach1-4/+9
The vlib init function subsystem now supports a mix of procedural and formally-specified ordering constraints. We should eliminate procedural knowledge wherever possible. The following schemes are *roughly* equivalent: static clib_error_t *init_runs_first (vlib_main_t *vm) { clib_error_t *error; ... do some stuff... if ((error = vlib_call_init_function (init_runs_next))) return error; ... } VLIB_INIT_FUNCTION (init_runs_first); and static clib_error_t *init_runs_first (vlib_main_t *vm) { ... do some stuff... } VLIB_INIT_FUNCTION (init_runs_first) = { .runs_before = VLIB_INITS("init_runs_next"), }; The first form will [most likely] call "init_runs_next" on the spot. The second form means that "init_runs_first" runs before "init_runs_next," possibly much earlier in the sequence. Please DO NOT construct sets of init functions where A before B actually means A *right before* B. It's not necessary - simply combine A and B - and it leads to hugely annoying debugging exercises when trying to switch from ad-hoc procedural ordering constraints to formal ordering constraints. Change-Id: I5e4353503bf43b4acb11a45fb33c79a5ade8426c Signed-off-by: Dave Barach <dave@barachs.net>
2019-04-08fixing typosJim Thompson1-1/+1
Change-Id: I215e1e0208a073db80ec6f87695d734cf40fabe3 Signed-off-by: Jim Thompson <jim@netgate.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra2-6/+6
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-11dpo: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar5-157/+51
Change-Id: I3043112c3e7584f61e64dc6d20d57604ebceb76a Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-02-14Add -fno-common compile optionBenoît Ganne6-4/+8
-fno-common makes sure we do not have multiple declarations of the same global symbol across compilation units. It helps debug nasty linkage bugs by guaranteeing that all reference to a global symbol use the same underlying object. It also helps avoiding benign mistakes such as declaring enum as global objects instead of types in headers (hence the minor fixes scattered across the source). Change-Id: I55c16406dc54ff8a6860238b90ca990fa6b179f1 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2018-12-18MFIB: recurse resolution through an MFIB entryNeale Ranns4-0/+113
Change-Id: I8dc261e40b8398c5c8ab6bb69ecebbd0176055d9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-16IP6-MFIB: replace the radix tree with bihash (VPP-1526)Neale Ranns1-3/+3
Change-Id: I7a48890c075826fbd8c75436dfdc5ffff230a693 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach2-3/+3
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-02vlib: define minimum chained buffer segment sizeDamjan Marion1-1/+2
Change-Id: I9b5f7b264f9978e3dd97b2d1eb103b7d10ac3170 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-23c11 safe string handling supportDave Barach8-8/+8
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-16FIB: use vlib-log for debuggingNeale Ranns3-33/+39
Change-Id: I9052202b8cbcf656e61d635253d515f0f3a8d145 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-16Sticky Load-balanceNeale Ranns2-24/+130
keep the number of buckets in the load-balanced fixed. If a path goes dwon fill its buckets with those from the next available up path. Change-Id: I15603ccb899fa9b77556b898c99136379cf32eae Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-08replicate trace fixNeale Ranns1-2/+6
Change-Id: I785ecadbf30812a500629870aa717e64f4cf0cdd Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-01mroute routers in the stats segmentNeale Ranns1-1/+6
Change-Id: I798e4fb6470ae9e763f8de1c290ff0fc3c0b7f9e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-20Route counters in the stats segmentNeale Ranns1-1/+10
route ADD API changed to return the stats segment index to use to read the counters Change-Id: I2ef41e01eaa2f9cfaa49d9c88968897793825925 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-14BIER API and load-balancing fixesNeale Ranns1-2/+2
Change-Id: Ibda19d786070c942c75016ab568c8361de2f24af Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-30SR-MPLS: fixes and testsNeale Ranns1-1/+1
- the FIB path takes a vector of type fib_mpls_label_t not u32 so the untype safe vec_add did not work - write som eSR-MPLS tests - allow an MPLS tunnel to resolve through a SR BSID Change-Id: I2a18b9a9bf43584100ac269c4ebc286c9e3b3ea5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-22show command for lookup DPOsNeale Ranns1-0/+40
Change-Id: I4907f48e6c4a4e91343fd0d4fface00f09e5fa2b Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-08-03loop counter to prevent infiinte number of look ups per-packetNeale Ranns1-1/+84
Change-Id: I59235d11baac18785a4c90cdaf14e8f3ddf06dab Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-19Remove unused argument to vlib_feature_nextDamjan Marion1-6/+3
Change-Id: Ieb8b53977fc8484c19780941e232ee072b667de3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-11avoid using thread local storage for thread indexDamjan Marion1-1/+1
It is cheaper to get thread index from vlib_main_t if available... Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-06-26node functions cannot be always_inlineDamjan Marion1-10/+10
Thanks to gcc-8 for highlighting this... Change-Id: I53bfab631a40fd1b680c76a48b0307a33fa2b154 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-26Fix interface-rx-dpo-l2 node to setup l2_len in vnet bufferJohn Lo1-4/+16
Change-Id: Ic1fab1f3aba92bbdbfd281459562d1f9697ab465 Signed-off-by: John Lo <loj@cisco.com>
2018-05-04Harmonize vec/pool_get_aligned object sizes and alignment requestsDave Barach9-0/+53
Object sizes must evenly divide alignment requests, or vice versa. Otherwise, only the first object will be aligned as requested. Three choices: add CLIB_CACHE_LINE_ALIGN_MARK(align_me) at the end of structures, manually pad to an even divisor or multiple of the alignment request, or use plain vectors/pools. static assert for enforcement. Change-Id: I41aa6ff1a58267301d32aaf4b9cd24678ac1c147 Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-04-24memory leakKingwel Xie1-0/+3
obvious leak of parent_indices Change-Id: I572b33de1756c8062a87c754117d990622fe12fe Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
2018-04-12Fixes for 'make UNATTENDED=yes CC=clang CXX=clang verify'Neale Ranns1-10/+1
Change-Id: I994649761fe2e66e12ae0e49a84fb1d0a966ddfb Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-09DVR: save the rewrite length in packet meta-data for featuresNeale Ranns1-3/+9
Change-Id: I0efd03bdb84bc9ff2334d398bfdb82486228114a Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-20FIB Interpose SourceNeale Ranns5-26/+114
The interpose source allows the source/provider to insert/interpose a DPO in the forwarding chain of the FIB entry ahead of the forwarding provided by the next best source. For example if the API source (i.e the 'control plane') has provided an adjacency for forwarding, then an interpose source (e.g. a monitoring service) couold interpose a replicatte DPO to copy the traffic to another location AND forward using the API's adjacency. To use the interose feature an existing source (i.e FIB_SOURCE_PLUGIN_HI) cn specifiy as a flag FIB_ENTRY_FLAG_INTERPOSE and provide a DPO to interpose. One might also consider using interpose in conjunction with FIB_ENTRY_FLAG_COVER_INHERIT to ensure the interpose object affects all prefixes in the sub-tree. Change-Id: I8b2737b985f8f7c08123406d0491881def347b52 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-19Coverity found bugs in recent MPLS changesNeale Ranns2-2/+2
Change-Id: I590945fdc1af53208c990a52bbecdc992fd27532 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-19FIX: Fixed ip6_fib_dump api function response.Dmitry Vakhrushev2-0/+8
Change-Id: I26c5d61bc2f6188bcd4ecac4b5e9385821b0398b Signed-off-by: Dmitry Vakhrushev <dmitry@netgate.com>
2018-03-15Add a helper function to fetch vlib node index for already stacked dposVijayabhaskar Katamreddy2-0/+40
Change-Id: Ie07c6f3723312ce88046570dcbe591b72724657b Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-03-09MPLS Unifom modeNeale Ranns5-329/+1150
- support both pipe and uniform modes for all MPLS LSP - all API programming for output-labels requires that the mode (and associated data) is specificed - API changes in MPLS, BIER and IP are involved - new DPO [sub] types for MPLS labels to handle the two modes. Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-05IP6 link-local tableNeale Ranns4-0/+245
- IPv6 link local table is a per-SW interface array of IPv6 unicast FIBs - the per-interface ocst is sizeof(fib_table_t) which is small, w.r.t. the cost of an interface - FE80::/10 in the 'global' table points to a DPO that performs a lookup in the input interface's LL fib. Change-Id: Ice834b25ebeeacb2e929d7c864d7ec8c09918cbe Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-07Refactor vlib_buffer flagsDamjan Marion1-6/+6
Change-Id: I853386aebfe488ebb10328435b81b6e3403c5dd0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-06BIER: fix support for longer bit-string lengthsNeale Ranns1-1/+2
Change-Id: I2421197b76be58099e5f8ed5554410adff202109 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-01-09DVR: run L3 output featuresNeale Ranns6-436/+661
- rename l2_bridged to is_dvr. Including on the ip.api this was new in the 18.01 release so no compatability issues. - steal the free space in vnet_buffer_opaque_t for use with flags. - run the ipX-output feature arc from the DVR DPO Change-Id: I040e5976d1dbe076fcdda3a40a7804f56337ce3f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-20L2 EmulationNeale Ranns1-1/+1
L2 Emulation is a feautre that is applied to L2 ports to 'extract' IP packets from the L2 path and inject them into the L3 path (i.e. into the appropriate ip[4|6]_input node). L3 routes in the table_id for that interface should then be configured as DVR routes, therefore the forwarded packet has the L2 header preserved and togehter the L3 routed system behaves like an L2 bridge. Change-Id: I8effd7e2f4c67ee277b73c7bc79aa3e5a3e34d03 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-09BIER in non-MPLS netowrksNeale Ranns2-0/+11
as decsribed in section 2.2 ihttps://tools.ietf.org/html/draft-ietf-bier-mpls-encapsulation-10 with BIFT encoding from: https://tools.ietf.org/html/draft-wijnandsxu-bier-non-mpls-bift-encoding-00 changes: 1 - introduce the new BIFT lookup table. BIER tables that have an associated MPLS label are added to the MPLS-FIB. Those that don't are added to the BIER table 2 - BIER routes that have no associated output MPLS label will add a BIFT label. 3 - The BIER FMask has a path-list as a member to resolve via any possible path. Change-Id: I1fd4d9dbd074f0e855c16e9329b81460ebe1efce Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-06Label stack size exceeded fixNeale Ranns2-1/+19
Change-Id: Ibe2041d83e9b5be16801dc316bd472ae4f6e8c31 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-14NULL-terminate load_balance_nsh_nodes[]Gabriel Ganne1-0/+1
Change-Id: Ibc5528bea564f6c2b0ff34220405395bc78274fc Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-11-09BIERNeale Ranns5-12/+86
- see draft-ietf-bier-mpls-encapsulation-10 - midpoint, head and tail functions - supported payload protocols; IPv4 and IPv6 only. Change-Id: I59d7363bb6fdfdce8e4016a68a9c8f5a5e5791cb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-03NAT64: Input feature arc on virtual interface via interface RX DPO.Ole Troan2-2/+2
Change-Id: If2048c7d72048679bc5d0412f3fae109926f759e Signed-off-by: Ole Troan <ot@cisco.com>
2017-10-31Refactor IP input checks for re-use at MPLS dispositionNeale Ranns1-20/+54
Change-Id: I7aafdecd6f370411138e6ab67b2ff72cda6e0666 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-25L3 proxy FIB source for container networkingAndrew Yourtchenko4-3/+270
Change-Id: I4164c4c19c8dbfd73e6ddf94a12056325cc093b9 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>