summaryrefslogtreecommitdiffstats
path: root/src/vnet/dpo
AgeCommit message (Collapse)AuthorFilesLines
2021-10-21ip: Add ip46-local node for local swif[rx]Nathan Skrzypczak1-8/+6
Type: improvement This adds a new ip[46]-receive node, sibling of ip[46]-local. Its goal is to set vnet_buffer (b)->ip.rx_sw_if_index to the sw_if_index of the local interface. In dependant nodes further down the line (e.g. hoststack) we then set sw_if_idx[rx] to this value. So that we know which local interface did receive the packet. The TCP issue this fixes is that : On accepts, we were setting tc->sw_if_index to the source sw_if_index. We should use the dest sw_if_index, so that packets coming back on this connection have the right source sw_if_index. And also setting it in the tx-ed packet. Change-Id: I569ed673e15c21e71f365c3ad45439b05bd14a9f Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-10-03mpls: Save the L3 header offset in the meta-data before label impositionNeale Ranns1-1/+9
Type: improvement Subsequent features in the data-path can thus easily find the l3 header without parsing the label stack. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I26f7d4bbe9186aeb8654706579c72424e8ecca2c
2021-08-10ip: Use the IP4 lookup functionsNeale Ranns1-48/+3
Type: refactor as opposed to wrtiing out the mtrie steps one by one each time. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I1248861350f9189f9a67ac6e68940813af279e03
2021-07-15misc: replace CLIB_PREFETCH with clib_prefetch_{load,store}Damjan Marion1-4/+4
Type: refactor Change-Id: Id10cbf52e8f2dd809080a228d8fa282308be84ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-07-13misc: fix init order to avoid startup warningsBin Zhou (bzhou2)1-3/+0
Put plugin init order inside plugin instead of in vnet Type: improvement Signed-off-by: Bin Zhou (bzhou2) <bzhou2@cisco.com> Change-Id: Icbacdb3f1cb4ac9d74e3f78458e8bc333793b4d6
2021-05-01vlib: refactor trajectory trace debug featureBenoît Ganne1-2/+0
trajectory trace has been broken for a while because we used to save the buffer trajectory in a vector pointed to in opaque2. This does not work well when opaque2 is copied (eg. because of a clone) as 2 buffers end up sharing the same vector. This dedicates a full cacheline in the buffer metadata instead when trajectory is compiled in. No dynamic allocation, no sharing, no tears. Type: refactor Change-Id: I6a028ca1b48d38f393a36979e5e452c2dd48ad3f Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-02-15ip: Path MTUNeale Ranns4-0/+79
Type: feature Support setting the MTU for a peer on an interface. The minimum value of the path and interface MTU is used at forwarding time. the path MTU is specified for a given peer, by address and table-ID. In the forwarding plane the MTU is enfored either: 1 - if the peer is attached, then the MTU is set on the peer's adjacency 2 - if the peer is not attached, it is remote, then a DPO is added to the peer's FIB entry to perform the necessary fragmentation. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
2020-12-14misc: move to new pool_foreach macrosDamjan Marion4-12/+12
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-11-26fib: Expressive type for walk return code. Honour code.Neale Ranns1-2/+2
Type: improvement Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: I487e698555545fce85d02d55deaaf7bb0007e388
2020-11-26fib: DPO layout add u64 parameter.Neale Ranns2-19/+29
Type: improvement Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Iee04af801814b6360b045cf7dc8bcad6f517229e
2020-10-28misc: Break the big IP header files to improve compile timeNeale Ranns3-3/+3
Type: refactor Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
2020-10-08l2: input performanceNeale Ranns1-1/+2
Type: improvement - cache the values form the BD on the input config to avoid loading - avoid the short write long read on the sequence number - use vlib_buffer_enqueue_to_next Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I33442b9104b457e4c638d26e9ad3bc965687a0bc
2020-06-07fib: fix multiple dpo pool expand casesDave Barach6-7/+76
Add dpo_pool_barrier_sync/release, use them to clean up thread-unsafe pool expansion cases. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I09299124a25f8d541e3bb4b75375568990e9b911
2020-06-04fib: add barrier sync, pool/vector expand casesDave Barach1-1/+25
load_balance_alloc_i(...) is not thread safe when the load_balance_pool or combined counter vectors expand. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I7f295ed77350d1df0434d5ff461eedafe79131de
2020-05-06docs: clean up make docs jobPaul Vinciguerra1-2/+2
Type: docs Change-Id: I9b5e5137eb4c1e89f6e8d7a278cd11a0fd496471 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-04-11fib: fix accessing empty dpo pool elementsShivaShankarK2-2/+8
Type: fix Signed-off-by: ShivaShankarK <shivaashankar1204@gmail.com> Change-Id: Iee88a2101ce42d7f1cdb65df532c349d14829e4c
2020-02-17misc: fix coverity warningsDave Barach1-2/+2
Add an ALWAYS_ASSERT (...) macro, to (a) shut up coverity, and (b) check the indicated condition in production images. As in: p = hash_get(...); ALWAYS_ASSERT(p) /* was ASSERT(p) */ elt = pool_elt_at_index(pool, p[0]); This may not be the best way to handle a specific case, but failure to check return values at all followed by e.g. a pointer dereference isn't ok. Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ia97c641cefcfb7ea7d77ea5a55ed4afea0345acb
2020-01-10docs: Edit FEATURE.yaml files so they can be publishedJohn DeNisco1-1/+1
Type: docs Signed-off-by: John DeNisco <jdenisco@cisco.com> Change-Id: I7280e5c5ad10a66c0787a5282291a2ef000bff5f
2020-01-03fib: Add dpo FEATURE.yaml fileNeale Ranns1-0/+15
Type: docs Change-Id: I9c4727db8d498d0b513157b19ad306b7aaacc222 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-10-09mpls: support fragmentation of mpls output packetRajesh Goel1-0/+18
Type: fix Signed-off-by: Rajesh Goel <rajegoel@cisco.com> Change-Id: Ie4372c5cf58ab215cdec5ce56f8a994daaba2844
2019-09-25fib: fix some typos in fib/mtrieLijian.Zhang4-4/+4
Type: fix Change-Id: I1af0e4a9bc23a3b6b6d3a74df093801ab6cae1f8 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
2019-08-29ip: remove unused function parameterSimon Zhang1-3/+3
Type: refactor Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com> Change-Id: I8674ff5f6f6336b256b7df8187afbb36ddef71fb
2019-08-15vlib: copy trace_handle in vlib_buffer_copy/clone() functionsJohn Lo1-4/+1
Since vlib_buffer_copy() and vlib_buffer_clone() both preserve VLIB_BUFFER_IS_TRACED bit in flags field, it should also copy trace_handle which would add minimal overhead. Thus, callers of these functions do not have to call vlib_buffer_copy_trace_flags() to copy trace_handle. Type: refactor Signed-off-by: John Lo <loj@cisco.com> Change-Id: Iff6a3f81660dd62b36a2966033eb380305340310
2019-07-24fib: Support the POP of a Psuedo Wire Control WordNeale Ranns4-0/+399
Type: feature Change-Id: Ib24547a7c4c73ceb5383d1ca8f14ec40e6a90f01 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-26fib: default flow hash config for each DPO protocol typeNeale Ranns2-0/+23
Type: fix Fixes: 59fa121f Change-Id: I9eb4fe1612734e54932228527c37bf33b705dbdb Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns1-7/+23
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-06DVR: Control the reinject as L2 or L3 based on the output interface typeNeale Ranns2-10/+83
Change-Id: Ib4cdbe8a6a1d10a643941c13aa0acbed410f876c Type: Feature Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-16init / exit function orderingDave Barach1-4/+9
The vlib init function subsystem now supports a mix of procedural and formally-specified ordering constraints. We should eliminate procedural knowledge wherever possible. The following schemes are *roughly* equivalent: static clib_error_t *init_runs_first (vlib_main_t *vm) { clib_error_t *error; ... do some stuff... if ((error = vlib_call_init_function (init_runs_next))) return error; ... } VLIB_INIT_FUNCTION (init_runs_first); and static clib_error_t *init_runs_first (vlib_main_t *vm) { ... do some stuff... } VLIB_INIT_FUNCTION (init_runs_first) = { .runs_before = VLIB_INITS("init_runs_next"), }; The first form will [most likely] call "init_runs_next" on the spot. The second form means that "init_runs_first" runs before "init_runs_next," possibly much earlier in the sequence. Please DO NOT construct sets of init functions where A before B actually means A *right before* B. It's not necessary - simply combine A and B - and it leads to hugely annoying debugging exercises when trying to switch from ad-hoc procedural ordering constraints to formal ordering constraints. Change-Id: I5e4353503bf43b4acb11a45fb33c79a5ade8426c Signed-off-by: Dave Barach <dave@barachs.net>
2019-04-08fixing typosJim Thompson1-1/+1
Change-Id: I215e1e0208a073db80ec6f87695d734cf40fabe3 Signed-off-by: Jim Thompson <jim@netgate.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra2-6/+6
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-11dpo: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar5-157/+51
Change-Id: I3043112c3e7584f61e64dc6d20d57604ebceb76a Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-02-14Add -fno-common compile optionBenoît Ganne6-4/+8
-fno-common makes sure we do not have multiple declarations of the same global symbol across compilation units. It helps debug nasty linkage bugs by guaranteeing that all reference to a global symbol use the same underlying object. It also helps avoiding benign mistakes such as declaring enum as global objects instead of types in headers (hence the minor fixes scattered across the source). Change-Id: I55c16406dc54ff8a6860238b90ca990fa6b179f1 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2018-12-18MFIB: recurse resolution through an MFIB entryNeale Ranns4-0/+113
Change-Id: I8dc261e40b8398c5c8ab6bb69ecebbd0176055d9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-16IP6-MFIB: replace the radix tree with bihash (VPP-1526)Neale Ranns1-3/+3
Change-Id: I7a48890c075826fbd8c75436dfdc5ffff230a693 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach2-3/+3
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-02vlib: define minimum chained buffer segment sizeDamjan Marion1-1/+2
Change-Id: I9b5f7b264f9978e3dd97b2d1eb103b7d10ac3170 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-23c11 safe string handling supportDave Barach8-8/+8
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-16FIB: use vlib-log for debuggingNeale Ranns3-33/+39
Change-Id: I9052202b8cbcf656e61d635253d515f0f3a8d145 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-16Sticky Load-balanceNeale Ranns2-24/+130
keep the number of buckets in the load-balanced fixed. If a path goes dwon fill its buckets with those from the next available up path. Change-Id: I15603ccb899fa9b77556b898c99136379cf32eae Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-08replicate trace fixNeale Ranns1-2/+6
Change-Id: I785ecadbf30812a500629870aa717e64f4cf0cdd Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-01mroute routers in the stats segmentNeale Ranns1-1/+6
Change-Id: I798e4fb6470ae9e763f8de1c290ff0fc3c0b7f9e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-20Route counters in the stats segmentNeale Ranns1-1/+10
route ADD API changed to return the stats segment index to use to read the counters Change-Id: I2ef41e01eaa2f9cfaa49d9c88968897793825925 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-14BIER API and load-balancing fixesNeale Ranns1-2/+2
Change-Id: Ibda19d786070c942c75016ab568c8361de2f24af Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-30SR-MPLS: fixes and testsNeale Ranns1-1/+1
- the FIB path takes a vector of type fib_mpls_label_t not u32 so the untype safe vec_add did not work - write som eSR-MPLS tests - allow an MPLS tunnel to resolve through a SR BSID Change-Id: I2a18b9a9bf43584100ac269c4ebc286c9e3b3ea5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-22show command for lookup DPOsNeale Ranns1-0/+40
Change-Id: I4907f48e6c4a4e91343fd0d4fface00f09e5fa2b Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-08-03loop counter to prevent infiinte number of look ups per-packetNeale Ranns1-1/+84
Change-Id: I59235d11baac18785a4c90cdaf14e8f3ddf06dab Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-19Remove unused argument to vlib_feature_nextDamjan Marion1-6/+3
Change-Id: Ieb8b53977fc8484c19780941e232ee072b667de3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-11avoid using thread local storage for thread indexDamjan Marion1-1/+1
It is cheaper to get thread index from vlib_main_t if available... Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-06-26node functions cannot be always_inlineDamjan Marion1-10/+10
Thanks to gcc-8 for highlighting this... Change-Id: I53bfab631a40fd1b680c76a48b0307a33fa2b154 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-26Fix interface-rx-dpo-l2 node to setup l2_len in vnet bufferJohn Lo1-4/+16
Change-Id: Ic1fab1f3aba92bbdbfd281459562d1f9697ab465 Signed-off-by: John Lo <loj@cisco.com>