Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Change-Id: I3659de6599f402c92e3855e3bf0e5e3388f2bea0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- per hw-interface-class handlers
- ethernet set_mtu callback
- driver can now refuse MTU change
Type: improvement
Change-Id: I3d37c9129930ebec7bb70caf4263025413873048
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Prep for supporting multiple callbacks, optional args, etc.
Type: improvement
Change-Id: I96244c098712e8213374678623f12527b0e7f387
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: style
reduce the number of files recompiled after changing pg.h from 1110 to
102.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I50611eba818eeb3a2dffd437a3c72c77766bed80
|
|
ethernet dataplane loads MAC addresses as 64-bits loads for efficiency.
We must make sure it is valid, especially for the vector of secondary
MACs.
Type: fix
Change-Id: I851e319b8a973c154e85ff9f05f3b8e385939788
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Fix and optimize DMAC check in ethernet-input node to utilize NIC or
driver which support L3 DMAC-filtering mode so that DMAC check can be
bypassed safely for interfaces/sub-interfaces in L3 mode.
Checking of interface in L3-DMAC-filtering state to avoid DMAC check
require the following:
a) Fix interface driver init sequence for devices which supports L3
DMAC-filtering to indicate its capability and initialize interface
to L3 DMAC-filtering state.
b) Fix ethernet_set_flags() function and its associated callback
flags_change() functions registered by various drivers in interface
infra to provide proper L3 DMAC filtering status.
Maintain interface/sub-interface L3 config count so DMAC checks can be
bypassed if L3 forwarding is not setup on any main/sub-interfaces.
Type: fix
Ticket: VPP-1868
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
|
|
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I9c2081c56cfbf61df7e5170002f5f65902f49942
|
|
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Change-Id: I37899a9c1c2b0790bee90b84aec6b51cdd5236b4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Maintain a list of secondary MAC addresses on ethernet_interface_t.
In ethernet-input dmac filtering, If packets do not match the
primary interface hardware address, check to see if they match the
other addresses.
Type: feature
Change-Id: Ie0edf45cae0d85c038a61086c47b3ae82d7e162d
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
The vlib init function subsystem now supports a mix of procedural and
formally-specified ordering constraints. We should eliminate procedural
knowledge wherever possible.
The following schemes are *roughly* equivalent:
static clib_error_t *init_runs_first (vlib_main_t *vm)
{
clib_error_t *error;
... do some stuff...
if ((error = vlib_call_init_function (init_runs_next)))
return error;
...
}
VLIB_INIT_FUNCTION (init_runs_first);
and
static clib_error_t *init_runs_first (vlib_main_t *vm)
{
... do some stuff...
}
VLIB_INIT_FUNCTION (init_runs_first) =
{
.runs_before = VLIB_INITS("init_runs_next"),
};
The first form will [most likely] call "init_runs_next" on the
spot. The second form means that "init_runs_first" runs before
"init_runs_next," possibly much earlier in the sequence.
Please DO NOT construct sets of init functions where A before B
actually means A *right before* B. It's not necessary - simply combine
A and B - and it leads to hugely annoying debugging exercises when
trying to switch from ad-hoc procedural ordering constraints to formal
ordering constraints.
Change-Id: I5e4353503bf43b4acb11a45fb33c79a5ade8426c
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
a new dedicated BVI interface as opposed to [re]using a loopback.
benefits:
- removes ambiguity over the purpose of a loopback interface
- TX node dedicated to BVI only functions.
Change-Id: I749d6b38440d450ac5b909a28053c75ec9df946a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
use address_t and mac_address_t for IPv6 and ARP entries
and all other API calls in ip.api aprat from the route ones,
that will follow in a separate commit
Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0e89fbc51f30325655c4e9d0104aceb3ead3b16f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I4ec7750ef58363bd8966a16a2baeec6db18b7e9e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Removed 0-tags attribute for default-sub-if config
Moved default-sub-if check before untagged
Change-Id: I68043445aa2f79846e0743567b9015257fd87f8d
Signed-off-by: Mike Bly <mbly@ciena.com>
|
|
Change-Id: I5a47d30d783dcf000e3ca2bcdc46e7d93654cc37
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I05d6c2cb5d34de469eb050e4ee10dc6b954c986d
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: Ic4c42c5610a827234e6582501f0ddcba47aa34ee
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I8335ebf266becf2f42bb3f28a17dfed8d9b08f97
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I6511110d0472203498a4f8741781eeeeb4f90844
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Also it removes ethernet_frame_is_any_taged implemebntation
which seems to be equally costly compared to two
invocations of ethernet_frame_is_tagged.
Change-Id: If1c95f8267cd34b807ec07e0d675cbd0db2fdf9f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I1771a1cca2a4bc394677b2a18f14c47f0633fa77
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- change interface naming scheme
- rework netlink code
- add option to set link address, namespace
Change-Id: Icf667babb3077a07617b0b87c45c957e345cb4d1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Global variables declared in header files without
the use of the 'extern' keword will result in multiple
instances of the variable to be created by the compiler
-- one for each different source file in which the
the header file is included. This results in wasted
memory allocated in the BSS segments as well as
potentially introducing bugs in the application.
Change-Id: I6ef1790b60a0bd9dd3994f8510723decf258b0cc
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
wildcard ND events publisher was sending the last event mutiple times
Change-Id: I6c30f2de03fa825e79df9005a3cfaaf68ff7ea2f
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
previous mechanism was emitting duplicates of last event, when handling multiple arp queries.
tests:
* arp events sent for graps
* duplicate suppression
* verify no events when disabled
Change-Id: I84adc23980d43b819261eccf02ec056b5cec61df
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Idb97e573961b3bc2acdeef77582314590795f8c3
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: I123eccea98abafeb31f25d2a162501e2eded60d4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
To save space in the first cacheline following is changed:
- total_length_not_including_first_buffer moved to the 2nd cacheline.
This field is used only when VLIB_BUFFER_TOTAL_LENGTH_VALID and
VLIB_BUFFER_NEXT_PRESENT are both set.
- free_list_index is now stored in 4bits inside flags, which
allows up to 16 free lists. In case we need more we can store index
in the 2nd cachelin
Change-Id: Ic8521350819391af470d31d3fa1013e67ecb7681
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
neighbor entry
Change-Id: I952039e101031ee6a06e63f4c73d8eb359423e1a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
To support creating loopback interfaces with a specific
instance number, a new CREATE_LOOPBACK_INSTANCE API call
with flag is_specified and value user_instance is introduced.
Presumably the existing CREATE_LOOPBACK API message will be
obsoleted and revmoved.
The VAT cli commands can now mention and format
the new field as 'instance %d' data. If no instance
number is named, the old call CREATE_LOOPBACK is used
to maintain backward compatibility. However, if the
instance is named, the new CREATE_LOOPBACK_INSTANCE
message will be used.
Both the dynamically allocated and user-requested instance
number are tracked in a bitvector. If is_specified is 0,
the next free instance will be used.. A request for a specific
instance number will be granted if it is available. On error,
the value ~0 is returned.
Change-Id: I849815563a5da736dcd6bccd262ef49b963f6643
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match
- Replication represented via a new replicate DPO.
- RPF configuration and data-plane checking
- data-plane signals sent to listening control planes.
The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast.
'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests.
Updated applications to use the new MIFB functions;
- IPv6 NS/RA.
- DHCPv6
unit tests for these are undated accordingly.
Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23
Signed-off-by: Damjan Marion <damarion@cisco.com>
|