summaryrefslogtreecommitdiffstats
path: root/src/vnet/ethernet/interface.c
AgeCommit message (Collapse)AuthorFilesLines
2022-03-29vnet: set frame overhead at interface registrationMatthew Smith1-2/+2
Type: fix Fixes: 1cd0e5dd533f In vnet_eth_register_interface(), max frame size was being used where frame overhead was intended. Change-Id: I6e6de25e2d616caaf35730ab3d15235ec679ebdd Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2022-01-18vnet: distinguish between max_frame_size and MTUDamjan Marion1-9/+17
Type: improvement Change-Id: I3659de6599f402c92e3855e3bf0e5e3388f2bea0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-17interface: improve MTU handlingDamjan Marion1-4/+15
- per hw-interface-class handlers - ethernet set_mtu callback - driver can now refuse MTU change Type: improvement Change-Id: I3d37c9129930ebec7bb70caf4263025413873048 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-07ethernet: new interface registration functionDamjan Marion1-39/+17
Prep for supporting multiple callbacks, optional args, etc. Type: improvement Change-Id: I96244c098712e8213374678623f12527b0e7f387 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-05interface: refactor interface capabilities codeDamjan Marion1-1/+1
Make it shorter to type, easier to debug, make adding callbacks in future simpler. Type: improvement Change-Id: I6cdd6375e36da23bd452a7c7273ff42789e94433 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-12-03interface: add multi tx-queues support for new tx infraMohsin Kazmi1-0/+1
Type: feature Change-Id: I231f782b3c56dc2b10321e4569ac7acdad1c11da Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-09-13ip-neighbor: Handle local MAC address change for incomplete adjacenciesNeale Ranns1-1/+1
Type: fix When the local MAC address of an interface changes the rewrite strings of all adjacency types need to be updated - this patch fixes the missing case of incomplete adjacencies. I moved the update of all adj types into the adj module, since if the complete adjs were done by the ip-neighbour module and incomplete ones by adj module, that would mean two walks of the adj DB, as it is not possible to walk only a specific type. UT is updated to include the missing case. Signed-off-by: Neale Ranns <neale@graphiant.com> Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com> Change-Id: I36af94976c645bdd0d4d3bc0093b24d7d077e9d7
2021-03-19interface: add capabilities flagsMohsin Kazmi1-1/+1
Type: improvement This patch adds flags to represent the modern NICs capabilities. Change-Id: I96d38d9ab7eac55974d72795cd100d8337168e1e Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-11-13ethernet: mac must support 64-bits loadsBenoît Ganne1-32/+41
ethernet dataplane loads MAC addresses as 64-bits loads for efficiency. We must make sure it is valid, especially for the vector of secondary MACs. Type: fix Change-Id: I851e319b8a973c154e85ff9f05f3b8e385939788 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-10-08l2: input performanceNeale Ranns1-24/+24
Type: improvement - cache the values form the BD on the input config to avoid loading - avoid the short write long read on the sequence number - use vlib_buffer_enqueue_to_next Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I33442b9104b457e4c638d26e9ad3bc965687a0bc
2020-05-27ethernet: fix DMAC check and skip unnecessary ones (VPP-1868)John Lo1-3/+30
Fix and optimize DMAC check in ethernet-input node to utilize NIC or driver which support L3 DMAC-filtering mode so that DMAC check can be bypassed safely for interfaces/sub-interfaces in L3 mode. Checking of interface in L3-DMAC-filtering state to avoid DMAC check require the following: a) Fix interface driver init sequence for devices which supports L3 DMAC-filtering to indicate its capability and initialize interface to L3 DMAC-filtering state. b) Fix ethernet_set_flags() function and its associated callback flags_change() functions registered by various drivers in interface infra to provide proper L3 DMAC filtering status. Maintain interface/sub-interface L3 config count so DMAC checks can be bypassed if L3 forwarding is not setup on any main/sub-interfaces. Type: fix Ticket: VPP-1868 Signed-off-by: John Lo <loj@cisco.com> Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
2020-03-27docs ethernet: add docs for ethernet SectionPaul Vinciguerra1-0/+7
Type: docs Change-Id: I6ad92b35df3e0fecb1334511625eacf3e3d8925f Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-02-26ethernet: configure system default ethernet MTUDave Barach1-2/+25
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I9c2081c56cfbf61df7e5170002f5f65902f49942
2019-12-17ip: Protocol Independent IP NeighborsNeale Ranns1-18/+71
Type: feature - ip-neighbour: generic neighbour handling; APIs, DBs, event handling, aging - arp: ARP protocol implementation - ip6-nd; IPv6 neighbor discovery implementation; separate ND, MLD, RA - ip6-link; manage link-local addresses - l2-arp-term; events separated from IP neighbours, since they are not the same. vnet retains just enough education to perform ND/ARP packet construction. arp and ip6-nd to be moved to plugins soon. Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-27misc: add address sanitizer heap instrumentationBenoît Ganne1-0/+1
Introduce AddressSanitizer support: https://github.com/google/sanitizers/ This starts with heap instrumentation. vlib_buffer, bihash and stack instrumentation should follow. Type: feature Change-Id: I7f20e235b2f79db72efd0e756f22c75f717a9884 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-29ethernet: VNET API to create sub-interfacesNeale Ranns1-0/+42
Type: refactor Change-Id: I37899a9c1c2b0790bee90b84aec6b51cdd5236b4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-02ethernet: dmac filter checks secondary mac addrsMatthew G Smith1-0/+47
Maintain a list of secondary MAC addresses on ethernet_interface_t. In ethernet-input dmac filtering, If packets do not match the primary interface hardware address, check to see if they match the other addresses. Type: feature Change-Id: Ie0edf45cae0d85c038a61086c47b3ae82d7e162d Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-03-21BVI InterfaceNeale Ranns1-1/+1
a new dedicated BVI interface as opposed to [re]using a loopback. benefits: - removes ambiguity over the purpose of a loopback interface - TX node dedicated to BVI only functions. Change-Id: I749d6b38440d450ac5b909a28053c75ec9df946a Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-02Deprecate old mutliarch code, phase 1Damjan Marion1-3/+0
It is causing compilation sloness with gcc-7 so removing it before it was originally planned. So far macros are left in the tree so we can know which nodes to convert to new multiarch code. Change-Id: Idb14622ca61fdce1eba59723b20d98715b7971e6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-30Use IP and MAC API types for neighborsNeale Ranns1-0/+1
use address_t and mac_address_t for IPv6 and ARP entries and all other API calls in ip.api aprat from the route ones, that will follow in a separate commit Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-20ethernet-input optimizationsDamjan Marion1-0/+1
Change-Id: I4ec7750ef58363bd8966a16a2baeec6db18b7e9e Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-13vlib rename vlib_frame_args(...) to vlib_frame_scalar_args(..)Damjan Marion1-1/+1
Typically we have scalar_size == 0, so it doesn't matter but vlib_frame_args was providing pointer to scalar frame data, not vector data. To avoid future confusion function is renamed to vlib_frame_scalar_args(...) Change-Id: I48b75523b46d487feea24f3f3cb10c528dde516f Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-23c11 safe string handling supportDave Barach1-3/+3
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-05On interface deletion - make sure any vlan qinq table is clearedJohn Lo1-0/+2
Change-Id: Ie9bb1cfce2369b448ca55a21b2f8b8bbbb81c59c Signed-off-by: John Lo <loj@cisco.com>
2018-09-08L2 BVI/FIB: Update L2 FIB table when BVI's MAC changesNeale Ranns1-1/+14
also some moving of l2 headers to reduce dependencies Change-Id: I7a700a411a91451ef13fd65f9c90de2432b793bb Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-21Loopback tx: support multiple tx intfcs per frameDave Barach1-153/+197
Can happen if code bypasses the per-interface output node, and dispatches packets directly to the tx node. Switch to vlib_get_buffers(...) ... vlib_buffer_enqueue_to_next (...), quad/single loop coding pattern. Change-Id: Ic0e5d3b9748230f4e545a54186e6e64e7a782bb1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-17loopback:fix delete to check interface classEyal Bari1-13/+6
Change-Id: Ia563b279e85b5da93f79db5a2a4d9b8c04f5be99 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-07-15VPP-1341: fix loopback interface graph arcsDave Barach1-50/+173
Remove broken special case from l2_input.c:set_int_l2_mode(), which turns out to confuse the graph dispatch engine. The loopback TX function needs to push packets to either ethernet-input or to l2-input, based on bridge / BVI configuration. Rather than overloading a single graph arc - and making vain attempts to reconfigure it - create both arcs and use the correct one. Rewrote the loopback tx function as an idosyncratic multi-arch quad/single loop fn. Change-Id: I15b56ce641d90a11e7b3c7d23859f40e168dd7b2 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-07PipesNeale Ranns1-2/+5
A pipe resembles a unix pipe. Each end of the pipe is a full VPP interface. pipes can be used for e.g. packet recirculation, inter-BD, etc. Change-Id: I185bb9fb43dd233ff45da63ac1b85ae2e1ceca16 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-06-11MTU: Software interface / Per-protocol MTU supportOle Troan1-3/+1
This patch separates setting of hardware interfaec and software interface MTU. Software MTU is L2 payload MTU (i.e. not including L2 header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set. Currently only IP4, IP6 are enabled in adjacency / rewrite code. Documentation in src/vnet/MTU.md Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690 Signed-off-by: Ole Troan <ot@cisco.com>
2018-04-27TAP memory leaks:Neale Ranns1-1/+0
1 - use bit-map to re-use ID values and thus VLIB nodes 2 - free vrings 3 - free hw_address on HW interface delete (a HW * struct is memset on pool_get) 4 - free temporary node names during TX node setup Change-Id: Id114c8bb9c844fd4ceb02fbbeb4b511ecfeb61ce Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-13Revert "MTU: Setting of MTU on software interface (instead of hardware ↵Damjan Marion1-1/+4
interface)" This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa. Reverting as this patch is causing following crash: 0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails Aborted Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13MTU: Setting of MTU on software interface (instead of hardware interface)Ole Troan1-4/+1
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901 Signed-off-by: Ole Troan <ot@cisco.com>
2018-04-09L2: no-flood interface type in the Bridge-DomainNeale Ranns1-0/+4
Change-Id: I50ff0cacf88182f8e0be19840c50f4954de586e2 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-07Fix Avoid crash in vnet_delete_sub_interface routineSteve Shin1-1/+2
vnet_get_sw_interface shoud be called after sw_if_index is validated. Change-Id: I36f1d90999c740803386404ba9b32703b659cd54 Signed-off-by: Steve Shin <jonshin@cisco.com>
2018-02-20Fix reset the vlan flags when main interface is deleted.Steve Shin1-0/+2
The dot1q_vlans & dot1ad_vlans should be reset to 0 when main interface is deleted. Otherwise, VPP will crash if the same interface index is reused without attaching the sub interface on it. Change-Id: I484d4a8892ff4241a3a32b22189746193d5f2594 Signed-off-by: Steve Shin <jonshin@cisco.com>
2018-01-19Sub-Interface deletion not cleanup hash's properly (VPP-1136)John Lo1-10/+7
On deleting sub-interfaces, functions vnet_delete_sub_interface() and vnet_delete_hw_interface() are not cleaning up sub-interface related hash tables and memory properly. Change-Id: I17c7c4b2078c062c77bfe48889beb677610035ca Signed-off-by: John Lo <loj@cisco.com> (cherry picked from commit 7f5bec647c9dc743c015d461d040e63a77fd0a08)
2017-08-01P2P EthernetPavel Kotucek1-13/+41
Change-Id: Idb97e573961b3bc2acdeef77582314590795f8c3 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-04-07MPLS McastNeale Ranns1-1/+1
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-06Use thread local storage for thread indexDamjan Marion1-3/+4
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-03Implement a loopback instance allocation scheme.Jon Loeliger1-11/+112
To support creating loopback interfaces with a specific instance number, a new CREATE_LOOPBACK_INSTANCE API call with flag is_specified and value user_instance is introduced. Presumably the existing CREATE_LOOPBACK API message will be obsoleted and revmoved. The VAT cli commands can now mention and format the new field as 'instance %d' data. If no instance number is named, the old call CREATE_LOOPBACK is used to maintain backward compatibility. However, if the instance is named, the new CREATE_LOOPBACK_INSTANCE message will be used. Both the dynamically allocated and user-requested instance number are tracked in a bitvector. If is_specified is 0, the next free instance will be used.. A request for a specific instance number will be granted if it is available. On error, the value ~0 is returned. Change-Id: I849815563a5da736dcd6bccd262ef49b963f6643 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns1-0/+20
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+730
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>