summaryrefslogtreecommitdiffstats
path: root/src/vnet/ethernet/interface.c
AgeCommit message (Collapse)AuthorFilesLines
2018-06-11MTU: Software interface / Per-protocol MTU supportOle Troan1-3/+1
This patch separates setting of hardware interfaec and software interface MTU. Software MTU is L2 payload MTU (i.e. not including L2 header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set. Currently only IP4, IP6 are enabled in adjacency / rewrite code. Documentation in src/vnet/MTU.md Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690 Signed-off-by: Ole Troan <ot@cisco.com>
2018-04-27TAP memory leaks:Neale Ranns1-1/+0
1 - use bit-map to re-use ID values and thus VLIB nodes 2 - free vrings 3 - free hw_address on HW interface delete (a HW * struct is memset on pool_get) 4 - free temporary node names during TX node setup Change-Id: Id114c8bb9c844fd4ceb02fbbeb4b511ecfeb61ce Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-13Revert "MTU: Setting of MTU on software interface (instead of hardware ↵Damjan Marion1-1/+4
interface)" This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa. Reverting as this patch is causing following crash: 0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails Aborted Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13MTU: Setting of MTU on software interface (instead of hardware interface)Ole Troan1-4/+1
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901 Signed-off-by: Ole Troan <ot@cisco.com>
2018-04-09L2: no-flood interface type in the Bridge-DomainNeale Ranns1-0/+4
Change-Id: I50ff0cacf88182f8e0be19840c50f4954de586e2 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-07Fix Avoid crash in vnet_delete_sub_interface routineSteve Shin1-1/+2
vnet_get_sw_interface shoud be called after sw_if_index is validated. Change-Id: I36f1d90999c740803386404ba9b32703b659cd54 Signed-off-by: Steve Shin <jonshin@cisco.com>
2018-02-20Fix reset the vlan flags when main interface is deleted.Steve Shin1-0/+2
The dot1q_vlans & dot1ad_vlans should be reset to 0 when main interface is deleted. Otherwise, VPP will crash if the same interface index is reused without attaching the sub interface on it. Change-Id: I484d4a8892ff4241a3a32b22189746193d5f2594 Signed-off-by: Steve Shin <jonshin@cisco.com>
2018-01-19Sub-Interface deletion not cleanup hash's properly (VPP-1136)John Lo1-10/+7
On deleting sub-interfaces, functions vnet_delete_sub_interface() and vnet_delete_hw_interface() are not cleaning up sub-interface related hash tables and memory properly. Change-Id: I17c7c4b2078c062c77bfe48889beb677610035ca Signed-off-by: John Lo <loj@cisco.com> (cherry picked from commit 7f5bec647c9dc743c015d461d040e63a77fd0a08)
2017-08-01P2P EthernetPavel Kotucek1-13/+41
Change-Id: Idb97e573961b3bc2acdeef77582314590795f8c3 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-04-07MPLS McastNeale Ranns1-1/+1
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-06Use thread local storage for thread indexDamjan Marion1-3/+4
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-03Implement a loopback instance allocation scheme.Jon Loeliger1-11/+112
To support creating loopback interfaces with a specific instance number, a new CREATE_LOOPBACK_INSTANCE API call with flag is_specified and value user_instance is introduced. Presumably the existing CREATE_LOOPBACK API message will be obsoleted and revmoved. The VAT cli commands can now mention and format the new field as 'instance %d' data. If no instance number is named, the old call CREATE_LOOPBACK is used to maintain backward compatibility. However, if the instance is named, the new CREATE_LOOPBACK_INSTANCE message will be used. Both the dynamically allocated and user-requested instance number are tracked in a bitvector. If is_specified is 0, the next free instance will be used.. A request for a specific instance number will be granted if it is available. On error, the value ~0 is returned. Change-Id: I849815563a5da736dcd6bccd262ef49b963f6643 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns1-0/+20
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+730
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>