aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2019-02-26Move pcap rx/tx trace code out of the dpdk pluginDave Barach1-17/+42
Moved code to the ethernet input node, and the interface output path(s). Since we no longer skip ethernet-input, there's no reason for device drivers to know anything about pcap rx tracing, etc. Change-Id: I08d32fb1b90cbee1bd4f609837d533e047b36fa4 Signed-off-by: Dave Barach <dave@barachs.net>
2019-02-22Callback functions must have the correct signatureNeale Ranns1-1/+3
Change-Id: I642823bdc3c7006a0b719ec1e3a9cd75b2b37253 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-07Fix parsing overflow in unformat_mac_address_t()Benoît Ganne1-3/+3
'%x' unformat specifier expects a pointer to a 4-byte object and will overflow when using a pointer to a 1-byte object. Use '%X' instead which allows to pass the size of the object alongside its pointer. The bug was exposed with the following commands: ~# make run DBGvpp# loop create loop0 DBGvpp# set ip6 neigh loop0 3001::2 a:a:a:a:a:a DBGvpp# show ip6 neigh Time Address Flags Link layer Interface 35.7743 ::2 D 0a:0a:0a:0a:0a:0a loop0 ^^^ wrong address: should be 3001::2 Note that the bug impact depends from the parsing order and memory layout. Change-Id: I29ba2eb53ba5a2daf4517215602d027508e2cb9f Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-02-02Deprecate old mutliarch code, phase 1Damjan Marion1-3/+0
It is causing compilation sloness with gcc-7 so removing it before it was originally planned. So far macros are left in the tree so we can know which nodes to convert to new multiarch code. Change-Id: Idb14622ca61fdce1eba59723b20d98715b7971e6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-30Use IP and MAC API types for neighborsNeale Ranns8-228/+265
use address_t and mac_address_t for IPv6 and ARP entries and all other API calls in ip.api aprat from the route ones, that will follow in a separate commit Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-23IP route local and connectedNeale Ranns1-1/+5
allow routes that are local and connected to be added via the API. this emulates the addition of a second address in the same subnet added to an interface. Change-Id: Ib18a08c26956be9a07b3360664210c8cf6734c84 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-22ethernet-input tagged packets optimizationsDamjan Marion1-269/+474
Change-Id: I21bdd8982d5f357590af8a2a0219bdebbaee4e74 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-12-18PAPI: Add MACAddress object wrapper for vl_api_mac_address_tOle Troan3-16/+7
Change the definition of vl_api_mac_address_t to an aliased type. Change-Id: I1434f316d0fad6a099592f39bceeb8faeaf1d134 Signed-off-by: Ole Troan <ot@cisco.com>
2018-11-26Add a feature arc consistency checkDave Barach1-0/+1
Verify that last node in the computed feature order matches reality. This check doesn't make sense in all cases, so we skip it if the newly-added vnet_feature_arc_registration_t ".last_in_arc" datum is a NULL pointer. Change-Id: Ia99c3e2b2da2e4780a7d5bc71670c5742a66fef2 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-26Remove unused argument from eth_identify_subint(...)Damjan Marion2-4/+2
Change-Id: I0e89fbc51f30325655c4e9d0104aceb3ead3b16f Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-21VPP-1309: fixed crash when listing ip arp after removing interfacePavel Kotucek1-0/+24
Change-Id: I8f88214eab0535573863f31d2c21e2239a811921 Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>
2018-11-21ethernet-input: fix assert in l2 modeDamjan Marion1-9/+24
Change-Id: I3befc762694e7c6d6847c361a144f72547038ba1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-20ethernet-input optimizationsDamjan Marion3-22/+533
Change-Id: I4ec7750ef58363bd8966a16a2baeec6db18b7e9e Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-18mac_address_t: size to 6 bytes so it represents wire formatNeale Ranns1-7/+15
Change-Id: I4d6b505a2b1e0cb960a4145796351ad1bc7e860d Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach2-23/+25
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-13vlib rename vlib_frame_args(...) to vlib_frame_scalar_args(..)Damjan Marion1-1/+1
Typically we have scalar_size == 0, so it doesn't matter but vlib_frame_args was providing pointer to scalar frame data, not vector data. To avoid future confusion function is renamed to vlib_frame_scalar_args(...) Change-Id: I48b75523b46d487feea24f3f3cb10c528dde516f Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-07GBP Endpoint LearningNeale Ranns1-0/+13
Learning GBP endpoints over vxlan-gbp tunnels Change-Id: I1db9fda5a16802d9ad8b4efd4e475614f3b21502 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-11-06BD ARP entry use common API typesNeale Ranns1-5/+13
Change-Id: I29f20dbaf2c2d735faff297cee552ed648f6f61b Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-05Genric API types format/unformat support for VAT and custom dumpNeale Ranns4-13/+21
Change-Id: I8bc3a991f0ede0605d78b51ba609fbe5889513f2 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-02arp:add error counters for all failure casesEyal Bari1-3/+3
Change-Id: Ided6c661edc9e2035fd7b472c312e2380d3f9c0b Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-10-23c11 safe string handling supportDave Barach1-3/+3
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-12vnet: complete the fix for l3_hdr_offset calculation for single loop ↵Andrew Yourtchenko1-1/+1
fastpass case (VPP-1444) 20e6d36b has moved the calculation of the l3_hdr_offset into the determine_next_node() function, with the assumption that the current_data in the buffer is at the L3 header. This is not the case for the single loop fastpath, where the vlib_buffer_advance() call is made after the call to determine_next_node(), as a day1 behavior. As a result - that path incorrectly sets the l3_hdr_offset. Solution: move the vlib_buffer_advance() call to before determine_next_node() Change-Id: Id5eaa084c43fb6564f8239df4a0b3dc0412b15de Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit 376414f4c3f53af44da4e82ee5d0b1843b291f8e)
2018-10-09vnet: ethernet-input incorrectly sets l3_hdr_offset in some casesAndrew Yourtchenko1-26/+26
The issue surfaced when developing the tap GSO code, with an iteration where output path is reliant on vnet_buffer (b0)->l3_hdr_offset being set correctly in the input path, during performance testing. Adding a workaround in the TX path shows that the issue surfaces only for relatively few packets during the test (about 100 out of 600000). Analysis shows the issue arises if the ethernet-input is handling two untagged packets with different sw_if_index values - then the accelerated path punts to slow path, before the setting of the l2.l2_len values is done, thus resulting in them being 0, and l3_hdr_offset being the same as l2_hdr_offset, wreaking havoc on TX path. The solution is to move the l2_hdr_offset calculation into a place where it is done for all the packets, and move the l3_hdr_offset calculation into the determine_next_node() function - as that function is also the one setting the special-case l2.l2_len value for tagged packets and moving the current_data for the L2 case. Change-Id: If728c7715e011930c1887691188c98055bddde67 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-05On interface deletion - make sure any vlan qinq table is clearedJohn Lo1-0/+2
Change-Id: Ie9bb1cfce2369b448ca55a21b2f8b8bbbb81c59c Signed-off-by: John Lo <loj@cisco.com>
2018-10-02Enabled untagged vs default functionalityMike Bly2-6/+5
Removed 0-tags attribute for default-sub-if config Moved default-sub-if check before untagged Change-Id: I68043445aa2f79846e0743567b9015257fd87f8d Signed-off-by: Mike Bly <mbly@ciena.com>
2018-09-25L2 BD: introduce a BD interface on which to send UU packetsNeale Ranns1-1/+2
Change-Id: I21ad6b04c19c8735d057174b1f260a59f2812241 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-25dpdk: show pluggable info in 'show hardware'Damjan Marion2-19/+48
module: id SFP/SFP+/SFP28, compatibility: 40g_active_cable vendor: Amphenol, part NDCCGF-I202 revision: C, serial: APF1711202351C, date code: 170318 cable length: 2m Change-Id: Ife35607b4f078f7b56737fe066ad4cbd247a7504 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-24ARP: don't use RPC for requests initiated from the main threadNeale Ranns2-114/+87
Change-Id: If833680149eb33db6adc836c5330f350042869f4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-14Revert "L2-input: use vlib_buffer_enqueue_to_next"John Lo1-3/+3
The patch did not improve single input link performance and degrade performance with multiple input links. This reverts commit b1232555e91b286feab5667b5a22f29aa8e96626. Change-Id: Ib9336a2e0610088b9145a43cacbdadb52dabd522 Signed-off-by: John Lo <loj@cisco.com>
2018-09-13L2-input: use vlib_buffer_enqueue_to_nextNeale Ranns1-3/+3
use the same trick as l2-ouput to group the processing of packets on the same interface. Change-Id: Ib2a6a1b5f362372936197f5bb2fdd0fe9439226b Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-12fix missing extern in vnet/ethernet/node.cDamjan Marion1-1/+1
Change-Id: Idabdd1112ba7e390a7b14a83cc7fbd198c8754df Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-10new multiversioning on ethernet input nodesDamjan Marion1-34/+16
Change-Id: I1aa196756b3ff4969b8ff2f117778d2cd87d6dd5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-08L2 BVI/FIB: Update L2 FIB table when BVI's MAC changesNeale Ranns2-1/+15
also some moving of l2 headers to reduce dependencies Change-Id: I7a700a411a91451ef13fd65f9c90de2432b793bb Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-06eth_mac_equal takes const pointersNeale Ranns1-1/+1
Change-Id: I5a47d30d783dcf000e3ca2bcdc46e7d93654cc37 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-05Add missing API MAC address encode implementationNeale Ranns1-0/+1
Change-Id: I4cb073f23a7f24f0fc16f2eda8b869dbe657f71b Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-31Fix typoDave Barach1-1/+1
Change-Id: Iadf4ce27f56400b669b80f2e718b6d4330c949a5 Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-08-31Introduce a mac_address_t on the API and in VPPNeale Ranns6-2/+236
Change-Id: I05d6c2cb5d34de469eb050e4ee10dc6b954c986d Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-08-22Consolidate the [un]format_mac_address implementationsNeale Ranns2-0/+15
Change-Id: Ic4c42c5610a827234e6582501f0ddcba47aa34ee Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-30FIB: return entry prefix by const reference to avoid the copyNeale Ranns1-7/+8
Change-Id: I09b8406168df4b6b28df3ede24ee839681be0195 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-21Loopback tx: support multiple tx intfcs per frameDave Barach1-153/+197
Can happen if code bypasses the per-interface output node, and dispatches packets directly to the tx node. Switch to vlib_get_buffers(...) ... vlib_buffer_enqueue_to_next (...), quad/single loop coding pattern. Change-Id: Ic0e5d3b9748230f4e545a54186e6e64e7a782bb1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-20IP directed broadcastNeale Ranns1-0/+9
with ip direct broadcast enable a packet to the interface's subnet broadcast address with be sent L2 broadcast on the interface. dissabled, it will be dropped. it is disabled by default, which preserves current behaviour Change-Id: If154cb92e64834e97a541b32624354348a0eafb3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-20QoS: marking and recording for MPLS and VLANNeale Ranns1-0/+8
Change-Id: Icec79aa9039d5d7835d311fde0b7c1a0c76c9eb1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-19Remove unused argument to vlib_feature_nextDamjan Marion1-3/+3
Change-Id: Ieb8b53977fc8484c19780941e232ee072b667de3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-17loopback:fix delete to check interface classEyal Bari1-13/+6
Change-Id: Ia563b279e85b5da93f79db5a2a4d9b8c04f5be99 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-07-15VPP-1341: fix loopback interface graph arcsDave Barach1-50/+173
Remove broken special case from l2_input.c:set_int_l2_mode(), which turns out to confuse the graph dispatch engine. The loopback TX function needs to push packets to either ethernet-input or to l2-input, based on bridge / BVI configuration. Rather than overloading a single graph arc - and making vain attempts to reconfigure it - create both arcs and use the correct one. Rewrote the loopback tx function as an idosyncratic multi-arch quad/single loop fn. Change-Id: I15b56ce641d90a11e7b3c7d23859f40e168dd7b2 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-14Improve IP4 ARP and IP6 ND Events Notificationv18.10-rc0John Lo1-10/+25
For L2 ARP termination, use both brodcast ARP request and reply packets to provide MAC/IP binding events. For IP4/IP6 neighbor adress resolution, send resolution events if there is an address resolution attemp with a static neighbor entry where both IP and MAC matches. This allow probe of an IP neighbor with a static entry to confirm it is responding with a reply matching that of the static entry. Change-Id: Iffb923bb5aea3f9021436735d5ca06e7b24f966f Signed-off-by: John Lo <loj@cisco.com>
2018-07-11avoid using thread local storage for thread indexDamjan Marion2-2/+2
It is cheaper to get thread index from vlib_main_t if available... Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-07PipesNeale Ranns2-3/+15
A pipe resembles a unix pipe. Each end of the pipe is a full VPP interface. pipes can be used for e.g. packet recirculation, inter-BD, etc. Change-Id: I185bb9fb43dd233ff45da63ac1b85ae2e1ceca16 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-06-25Add checks for bad ARP request packets in arp-termination nodeJohn Lo1-12/+9
Check ARP request packet with bad requester MAC/IP address and drop these packets. Also removed useless VRRP check in the node. Change-Id: I2c8a774d291928eb623b3a515f1edf7e338fa760 Signed-off-by: John Lo <loj@cisco.com>
2018-06-19Check get packet template allocation failure (VPP-1321)John Lo1-0/+6
After calling vlib_packet_template_get_packet(), make sure packet buffer is allocated before using it. Change-Id: Idb5199f4e2c9596137b2101e502d611f474a6ffe Signed-off-by: John Lo <loj@cisco.com>