summaryrefslogtreecommitdiffstats
path: root/src/vnet/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2020-02-24ethernet: trivial additionsNeale Ranns2-0/+9
Type: improvement - macros to identify SENDER and TARGET in ARP header - count the number of bits set in a mac_address Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Id31e27a4f5f01a8cfb70d3798416bb2519981654
2019-12-17ip: Protocol Independent IP NeighborsNeale Ranns8-3208/+212
Type: feature - ip-neighbour: generic neighbour handling; APIs, DBs, event handling, aging - arp: ARP protocol implementation - ip6-nd; IPv6 neighbor discovery implementation; separate ND, MLD, RA - ip6-link; manage link-local addresses - l2-arp-term; events separated from IP neighbours, since they are not the same. vnet retains just enough education to perform ND/ARP packet construction. arp and ip6-nd to be moved to plugins soon. Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-10api: multiple connections per processDave Barach1-1/+1
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
2019-11-27misc: add address sanitizer heap instrumentationBenoît Ganne1-0/+1
Introduce AddressSanitizer support: https://github.com/google/sanitizers/ This starts with heap instrumentation. vlib_buffer, bihash and stack instrumentation should follow. Type: feature Change-Id: I7f20e235b2f79db72efd0e756f22c75f717a9884 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-11-26ethernet: all dmac checks include secondary addrsMatthew Smith1-19/+106
Type: feature In ethernet_input_inline(), when verifying that the destination mac address on a received packet matches the mac address of the interface where the packet was received, check the secondary addresses on the interface if the primary address does not match. This was done previously for eth_input_single_int(). Change-Id: I45716184dd789d83852271f9c79cedf5f6cbf75b Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-11-26fib: Table ReplaceNeale Ranns2-37/+0
Type: feature from the API doc, a table replace is: " The use-case is that, for some unspecified reason, the control plane has a very different set of entries it wants in the table than VPP currently has. The CP would thus like to 'replace' VPP's current table only by specifying what the new set of entries shall be, i.e. it is not going to delete anything that already eixts. the CP delcartes the start of this procedure with this begin_replace API Call, and when it has populated all the entries it wants, it calls the below end_replace API. From this point on it is of coursce free to add and delete entries as usual. The underlying mechanism by which VPP implements this replace is purposefully left unspecified. " In the FIB, the algorithm is implemented using mark and sweep. Algorithm goes: 1) replace_begin: this marks all the entries in that table as 'stale' 2) download all the entries that should be in this table - this clears the stale flag on those entries 3) signal the table converged: ip_table_replace_end - this removes all entries that are still stale this procedure can be used when an agent first connects to VPP, as an alternative to dump and diff state reconciliation. Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-25vlib: autogenerate <node> before <last-in-arc> constraintsDave Barach1-1/+1
If an arc declaration includes '.last_in_arc = "some-node"', assume that folks mean it and add explicit ordering constraints. Fix the "arp" arc declaration which claimed that the arc ends at arp-disabled, but the arc really ends at error-drop. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ie2de1fb30091671cbc7c62770903a2e05987f141
2019-11-20classify: per-interface rx/tx pcap capture filtersDave Barach1-2/+12
Finish the feature, and fix a couple of doc bugs Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I2c62745fda137776204c8fc4fca0e7e288051573
2019-10-29ethernet: VNET API to create sub-interfacesNeale Ranns2-0/+45
Type: refactor Change-Id: I37899a9c1c2b0790bee90b84aec6b51cdd5236b4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-03ethernet: fix dmac filter coverity warningMatthew Smith1-1/+1
Static analysis says that a possibly null pointer is dereferenced. Check it first. Type: fix Change-Id: I3d1a1548162d1dfc26f19fbcf159f0f1f91eb7c4 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-10-02ethernet: dmac filter checks secondary mac addrsMatthew G Smith3-34/+186
Maintain a list of secondary MAC addresses on ethernet_interface_t. In ethernet-input dmac filtering, If packets do not match the primary interface hardware address, check to see if they match the other addresses. Type: feature Change-Id: Ie0edf45cae0d85c038a61086c47b3ae82d7e162d Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-09-26misc: add vnet classify filter set supportDave Barach1-4/+2
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I79b216d2499df143f53977e5b70382f6f887e0bc
2019-09-24vlib: add flag to explicitelly mark nodes which can init per-node packet traceDamjan Marion1-0/+1
Type: feature Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-09-23misc: unify pcap rx / tx / drop traceDave Barach1-8/+8
Use a single vnet_pcap_t in vlib_global_main, specifically to support unified tracing Update sphinx docs, doxygen tags Type: refactor Ticket: VPP-1776 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Id15d41a596712968c0714cef1bd2cd5bc9cbdd55
2019-09-20misc: classifier-based packet trace filterDave Barach1-1/+15
See .../src/vnet/classify/trace_classify.h for the business end of the scheme. It would be best to hash pkts, prefetch buckets, and do the primary table lookups two at a time. The inline as given works, but perf tuning will be required. "At least it works..." Add "classify filter" debug cli, for example: classify filter mask l3 ip4 src dst \ match l3 ip4 dst 192.168.2.10 src 192.168.1.10 Add "pcap rx | tx trace ... filter" to use the current classify filter chain Patch includes sphinx documentation and doxygen tags. Next step: device-driver integration Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I05b1358a769f61e6d32470e0c87058f640486b26
2019-09-16api: autogenerate api trace print/endianOle Troan2-1/+28
In addition to the external vppapitrace tool, VPP itself supports dumping of API trace files. In two formats, "custom-dump" and "dump". "dump" gives a human friendly list, and "custom-dump" is meant to give a list of commands that can be fed to VAT. This patch only deals with "dump". Prior to this fix, auto-generation was only done for the basic types. This fix adds support for any type, including lists, and supports pretty-printing of enums, strings, IP addresses, MAC addresses and so on. Usage: api trace dump <api-trace-file> For example Change-Id: I4e485680e6dcfce7489299ae6cf31d835071ac40 ---------- trace 48 ----------- vl_api_sw_interface_set_flags_t: _vl_msg_id: 75 client_index: 0 context: 10 sw_if_index: 1 flags: IF_STATUS_API_FLAG_ADMIN_UP ---------- trace 49 ----------- vl_api_sw_interface_add_del_address_t: _vl_msg_id: 88 client_index: 0 context: 11 sw_if_index: 1 is_add: 1 del_all: 0 prefix: 172.16.1.1/24 ---------- trace 51 ----------- vl_api_cli_inband_t: _vl_msg_id: 819 client_index: 0 context: 13 cmd: packet-generator capture pg0 pcap /tmp/vpp-unittest-TestMAP-YhcmDX/pg0_out.pcap disable ---------- trace 58 ----------- vl_api_ip_neighbor_add_del_t: _vl_msg_id: 199 client_index: 0 context: 20 is_add: 1 neighbor: sw_if_index: 2 flags: IP_API_NEIGHBOR_FLAG_NONE mac_address: 0202.0000.ff02 ip_address: fd01:2::2 Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I5556d06008de2762e7c2d35a8b0963ae670b3db1 Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2019-09-04ethernet: move dmac filtering to inline functionMatthew Smith1-56/+63
In eth_input_process_frame(), destination MAC addresses are compared to the interface hardware address in a loop. Move this to a separate inline function to facilitate making changes to the filtering logic more cleanly. Type: refactor Change-Id: I0978f01667e78af5214dbbc9ba223f5b84ce6b7e Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-09-03ethernet: fix dmac check avx2 loop conditionMatthew Smith1-1/+1
In eth_input_process_frame(), a loop which checks the destination MAC address of received packets had a different condition for avx2 than it did for the non-avx2 version of the loop. It could result in one unnecessary execution of the loop body after all packets had been processed. Type: fix Fixes: 8d6f34e2b1cbfde5702e88686631527d5e1e10a0 Change-Id: Ib673f45917a0dea461987fdc8f0ca318b749fb1a Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-08-20api: Cleanup APIs interface.apiJakub Grajciar1-0/+1
Use of consistent API types for interface.api Type: fix Change-Id: I88206d7d0907cffd564031f73c9a996df2e5e21a Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-08-06ethernet: change to mark the CFI bit in the L2 header.Prashant Maheshwari1-3/+3
Type: fix Fixes: 039cbfe2 Signed-off-by: Prashant Maheshwari <pmahesh2@cisco.com> Change-Id: Idca91c73758824688dd6ce61df994be66753d838
2019-08-02ethernet: fix ARP feature arc definitionDave Barach1-2/+9
This patch gets rid of an ugly warning during vpp startup: "vnet_feature_init:143: WARNING: arp arc: last node is arp-disabled, but expected error-drop!" Type: fix Fixes: 1ff56f00ca015e82ef29955986e503913d1c3b86 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I80914a3c113c090a09bd5a5131e39f036871d92e
2019-08-01ethernet: Fix node ordering on ARP feautre ARCNeale Ranns1-2/+13
Type: fix Fixes: fe2fff37 this improves the tracing for dropped ARP packets Change-Id: Iefd0391e349fc54f1beebda403b2349534b20c48 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-15interface: fix issue that pcap rx/tx trace not available when there are ↵Wei CHEN1-4/+5
worker threads Type: fix Change-Id: Ie9a3a78b45b53344a0a5d7e2027c0e0354a49ebe Signed-off-by: Wei CHEN <weichen@astri.org>
2019-07-10ip: fix show ip neigh vector read overflowBenoît Ganne1-19/+6
Both format_ethernet_arp_ip4_entry() and format_ip6_neighbor_ip6_entry() used %s to format flags which is a vector and not a null-terminated C-string. Introduce format_ip_neighbor_flags() instead. Type: fix Fixes: 102ec52bc4 Change-Id: I0c9349fefbeb76471933de358acceb50512a21aa Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-07-05ethernet: ARP disabled nodeNeale Ranns1-15/+106
Type: feature improve the tracing from: 00:00:01:259665: pg-input stream pcap3, 42 bytes, 3 sw_if_index current data 0, length 42, buffer-pool 0, ref-count 1, trace handle 0x0 ARP: 02:03:00:00:ff:02 -> ff:ff:ff:ff:ff:ff request, type ethernet/IP4, address size 6/4 02:03:00:00:ff:02/172.16.3.5 -> 00:00:00:00:00:00/172.16.2.1 00:00:01:259690: ethernet-input frame: flags 0x1, hw-if-index 3, sw-if-index 3 ARP: 02:03:00:00:ff:02 -> ff:ff:ff:ff:ff:ff 00:00:01:259702: arp-input request, type ethernet/IP4, address size 6/4 02:03:00:00:ff:02/172.16.3.5 -> 00:00:00:00:00:00/172.16.2.1 00:00:01:259710: error-drop rx:pg2 00:00:01:259717: drop null-node: blackholed packets to 00:00:01:283323: pg-input stream pcap3, 42 bytes, 3 sw_if_index current data 0, length 42, buffer-pool 0, ref-count 1, trace handle 0x0 ARP: 02:03:00:00:ff:02 -> ff:ff:ff:ff:ff:ff request, type ethernet/IP4, address size 6/4 02:03:00:00:ff:02/172.16.3.5 -> 00:00:00:00:00:00/172.16.2.1 00:00:01:283348: ethernet-input frame: flags 0x1, hw-if-index 3, sw-if-index 3 ARP: 02:03:00:00:ff:02 -> ff:ff:ff:ff:ff:ff 00:00:01:283360: arp-input request, type ethernet/IP4, address size 6/4 02:03:00:00:ff:02/172.16.3.5 -> 00:00:00:00:00:00/172.16.2.1 00:00:01:283369: arp-disabled request, type ethernet/IP4, address size 6/4 02:03:00:00:ff:02/172.16.3.5 -> 00:00:00:00:00:00/172.16.2.1 00:00:01:283374: error-drop rx:pg2 00:00:01:283380: drop arp-disabled: ARP Disabled on this interface Change-Id: I49b915b84cf56d6c138dedd8a596c045c150c4fb Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-03misc: fix coverity warningsDave Barach1-0/+5
Type: fix Ticket: VPP-1649 Change-Id: I93a393eca80065c379035478500e75e855f39b12 Signed-off-by: Dave Barach <dave@barachs.net>
2019-07-02ip: check all fib src for a connected dst entryBenoît Ganne1-25/+53
When looking for a connected fib entry matching the ARP destination, there can be other DPO interposed prior to the connected one. Type: fix Change-Id: I9b4ab387fb08acf9879d5fda3791e6572a099492 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-06-07p2p ethernet: update p2p_ethernet.api with explicit types.Ole Troan1-5/+8
Change-Id: Id6b2c2321c5f1d56e7cfab24a7c1641b38e94e19 Type: refactor Signed-off-by: Ole Troan <ot@cisco.com>
2019-06-03ARP: add feature arcNeale Ranns2-142/+476
- arp-input, registered with the ethernet protocol dispatcher, performs basic checks and starts the arc - arp-reply; first feature on the arc replies to requests and learns from responses (no functional change) - arp-proxy; checks against the proxy DB arp-reply and arp-proxy are enabled when the interface is appropriately configured. Change-Id: I7d1bbabdb8c8b8187cac75e663daa4a5a7ce382a Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-28Punt: socket register for exception dispatched/punted packets based on reasonNeale Ranns1-0/+1
- add to the Punt API to allow different descriptions of the desired packets: UDP or exceptions - move the punt nodes into punt_node.c - improve tests (test that the correct packets are punted to the registered socket) Change-Id: I1a133dec88106874993cba1f5a439cd26b2fef72 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-16init / exit function orderingDave Barach4-30/+28
The vlib init function subsystem now supports a mix of procedural and formally-specified ordering constraints. We should eliminate procedural knowledge wherever possible. The following schemes are *roughly* equivalent: static clib_error_t *init_runs_first (vlib_main_t *vm) { clib_error_t *error; ... do some stuff... if ((error = vlib_call_init_function (init_runs_next))) return error; ... } VLIB_INIT_FUNCTION (init_runs_first); and static clib_error_t *init_runs_first (vlib_main_t *vm) { ... do some stuff... } VLIB_INIT_FUNCTION (init_runs_first) = { .runs_before = VLIB_INITS("init_runs_next"), }; The first form will [most likely] call "init_runs_next" on the spot. The second form means that "init_runs_first" runs before "init_runs_next," possibly much earlier in the sequence. Please DO NOT construct sets of init functions where A before B actually means A *right before* B. It's not necessary - simply combine A and B - and it leads to hugely annoying debugging exercises when trying to switch from ad-hoc procedural ordering constraints to formal ordering constraints. Change-Id: I5e4353503bf43b4acb11a45fb33c79a5ade8426c Signed-off-by: Dave Barach <dave@barachs.net>
2019-04-24ethernet_input_inline: leverage vlib_get_buffersZhiyong Yang1-17/+14
Make full use of well optimized function vlib_get_buffers for ethernet_input_inline. Change-Id: Iee7df570b87fa95c0902895686a62386d730f9a1 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-04-10ethernet: fix packet tracingBenoît Ganne1-1/+1
Node tracing condition was wrongly reversed by commit "5ecd5a5d15 Move pcap rx/tx trace code out of the dpdk plugin". This prevented packet tracing in ethernet-input node and also impacted performance in the no tracing case. Change-Id: I345a11191d027c6c4ec474a2901995338050680a Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-04-08fixing typosJim Thompson1-1/+1
Change-Id: I215e1e0208a073db80ec6f87695d734cf40fabe3 Signed-off-by: Jim Thompson <jim@netgate.com>
2019-03-28Add RDMA ibverb driver pluginBenoît Ganne1-0/+11
RDMA ibverb is a userspace API to efficiently rx/tx packets. This is an initial, unoptimized driver targeting Mellanox cards. Next steps should include batching, multiqueue and additional cards. Change-Id: I0309c7a543f75f2f9317eaf63ca502ac7a093ef9 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-5/+5
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-21BVI InterfaceNeale Ranns2-2/+2
a new dedicated BVI interface as opposed to [re]using a loopback. benefits: - removes ambiguity over the purpose of a loopback interface - TX node dedicated to BVI only functions. Change-Id: I749d6b38440d450ac5b909a28053c75ec9df946a Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-15Revert "API: Cleanup APIs interface.api"Ole Trøan1-1/+0
This reverts commit e63325e3ca03c847963863446345e6c80a2c0cfd. Allow time for CSIT to accommodate. Change-Id: I59435e4ab5e05e36a2796c3bf44889b5d4823cc2 Signed-off-by: ot@cisco.com
2019-03-15API: Cleanup APIs interface.apiJakub Grajciar1-0/+1
Use of consistent API types for interface.api Change-Id: Ieb54cebb4ac96b432a3f0b41596718aa2f34885b Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-03-13deprecate VLIB_NODE_FUNCTION_MULTIARCHFilip Tehlar1-8/+5
Change-Id: I403173846bc5b1bbbe2a2c41225b0f666f851cb9 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-05L2: ARP term - learn but don't send response to GARPsNeale Ranns1-0/+3
Change-Id: I766767d27f37493dc9f2bde1297c1b620cd1e321 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-26Move pcap rx/tx trace code out of the dpdk pluginDave Barach1-17/+42
Moved code to the ethernet input node, and the interface output path(s). Since we no longer skip ethernet-input, there's no reason for device drivers to know anything about pcap rx tracing, etc. Change-Id: I08d32fb1b90cbee1bd4f609837d533e047b36fa4 Signed-off-by: Dave Barach <dave@barachs.net>
2019-02-22Callback functions must have the correct signatureNeale Ranns1-1/+3
Change-Id: I642823bdc3c7006a0b719ec1e3a9cd75b2b37253 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-07Fix parsing overflow in unformat_mac_address_t()Benoît Ganne1-3/+3
'%x' unformat specifier expects a pointer to a 4-byte object and will overflow when using a pointer to a 1-byte object. Use '%X' instead which allows to pass the size of the object alongside its pointer. The bug was exposed with the following commands: ~# make run DBGvpp# loop create loop0 DBGvpp# set ip6 neigh loop0 3001::2 a:a:a:a:a:a DBGvpp# show ip6 neigh Time Address Flags Link layer Interface 35.7743 ::2 D 0a:0a:0a:0a:0a:0a loop0 ^^^ wrong address: should be 3001::2 Note that the bug impact depends from the parsing order and memory layout. Change-Id: I29ba2eb53ba5a2daf4517215602d027508e2cb9f Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-02-02Deprecate old mutliarch code, phase 1Damjan Marion1-3/+0
It is causing compilation sloness with gcc-7 so removing it before it was originally planned. So far macros are left in the tree so we can know which nodes to convert to new multiarch code. Change-Id: Idb14622ca61fdce1eba59723b20d98715b7971e6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-30Use IP and MAC API types for neighborsNeale Ranns8-228/+265
use address_t and mac_address_t for IPv6 and ARP entries and all other API calls in ip.api aprat from the route ones, that will follow in a separate commit Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-23IP route local and connectedNeale Ranns1-1/+5
allow routes that are local and connected to be added via the API. this emulates the addition of a second address in the same subnet added to an interface. Change-Id: Ib18a08c26956be9a07b3360664210c8cf6734c84 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-22ethernet-input tagged packets optimizationsDamjan Marion1-269/+474
Change-Id: I21bdd8982d5f357590af8a2a0219bdebbaee4e74 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-12-18PAPI: Add MACAddress object wrapper for vl_api_mac_address_tOle Troan3-16/+7
Change the definition of vl_api_mac_address_t to an aliased type. Change-Id: I1434f316d0fad6a099592f39bceeb8faeaf1d134 Signed-off-by: Ole Troan <ot@cisco.com>
2018-11-26Add a feature arc consistency checkDave Barach1-0/+1
Verify that last node in the computed feature order matches reality. This check doesn't make sense in all cases, so we skip it if the newly-added vnet_feature_arc_registration_t ".last_in_arc" datum is a NULL pointer. Change-Id: Ia99c3e2b2da2e4780a7d5bc71670c5742a66fef2 Signed-off-by: Dave Barach <dave@barachs.net>