summaryrefslogtreecommitdiffstats
path: root/src/vnet/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2021-07-15misc: replace CLIB_PREFETCH with clib_prefetch_{load,store}Damjan Marion1-1/+1
Type: refactor Change-Id: Id10cbf52e8f2dd809080a228d8fa282308be84ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-07-13misc: remove vnet_all_api_h and vnet_msg_enumFilip Tehlar1-14/+0
These file are no longer needed Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I34f8e0b7e17d9e8c06dcd6c5ffe51aa273cdec07
2021-06-22ethernet: api cleanupFilip Tehlar2-51/+8
Use autogenerated code. Does not change API definitions. Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: Iacaefbf04834f000a14f151c4b848f280ac46d63
2021-06-07pg: Reduce the inclusion of pg.hNeale Ranns2-11/+12
Type: style reduce the number of files recompiled after changing pg.h from 1110 to 102. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I50611eba818eeb3a2dffd437a3c72c77766bed80
2021-04-17classify: honor pcap interface filter also when classify filter is usedBenoît Ganne1-28/+3
Type: fix Change-Id: Ic32550ee9c5d76d232d8b67a7810611f6c8b9177 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-03-19interface: add capabilities flagsMohsin Kazmi1-1/+1
Type: improvement This patch adds flags to represent the modern NICs capabilities. Change-Id: I96d38d9ab7eac55974d72795cd100d8337168e1e Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-03-05interface: move vnet_pcap_t to vnetDamjan Marion1-3/+3
It naturally belogns there... Type: refactor Change-Id: I05f7ba01103a5e9b3756f1ea69c8cc5d8f26f0a0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-02-15misc: coverity fixesDave Barach1-2/+2
Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I6a3348c7edd1cce6b407d336443103f77392bc5d
2020-12-14api: add missing version infoPaul Vinciguerra1-0/+2
Type: fix Change-Id: I269214e3eae72e837f25ee61d714556d976d410f Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-11-13ethernet: mac must support 64-bits loadsBenoît Ganne3-40/+67
ethernet dataplane loads MAC addresses as 64-bits loads for efficiency. We must make sure it is valid, especially for the vector of secondary MACs. Type: fix Change-Id: I851e319b8a973c154e85ff9f05f3b8e385939788 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-11-09vlib: fix trace number accountingBenoît Ganne1-9/+13
When using classifier to filter traces, not all packets will be traced. In that case, we should only count traced packets. Type: fix Change-Id: I87d1e217b580ebff8c6ade7860eb43950420ae78 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-10-15ethernet: fix Ethernet DMAC checksIvan Shvedunov1-7/+12
Type: fix Due to confusion between ethernet flags and hw interface flags, DMAC filtering was not happening, most of the time. Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com> Change-Id: I95209e1ea0f95f9be0b1a82ec9fcbc80955428d2
2020-10-08l2: input performanceNeale Ranns1-24/+24
Type: improvement - cache the values form the BD on the input config to avoid loading - avoid the short write long read on the sequence number - use vlib_buffer_enqueue_to_next Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I33442b9104b457e4c638d26e9ad3bc965687a0bc
2020-10-08fib: Register multicast MAC with interface for accepting interfacesNeale Ranns1-5/+5
Type: fix Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ic6c76b65e2dcc08916373153944507a297c962c0
2020-08-06misc: harmonize namesDave Barach1-12/+12
Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ibad744788e200ce012ad88ff59c2c34920742454
2020-05-27ethernet: fix DMAC check and skip unnecessary ones (VPP-1868)John Lo3-29/+77
Fix and optimize DMAC check in ethernet-input node to utilize NIC or driver which support L3 DMAC-filtering mode so that DMAC check can be bypassed safely for interfaces/sub-interfaces in L3 mode. Checking of interface in L3-DMAC-filtering state to avoid DMAC check require the following: a) Fix interface driver init sequence for devices which supports L3 DMAC-filtering to indicate its capability and initialize interface to L3 DMAC-filtering state. b) Fix ethernet_set_flags() function and its associated callback flags_change() functions registered by various drivers in interface infra to provide proper L3 DMAC filtering status. Maintain interface/sub-interface L3 config count so DMAC checks can be bypassed if L3 forwarding is not setup on any main/sub-interfaces. Type: fix Ticket: VPP-1868 Signed-off-by: John Lo <loj@cisco.com> Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
2020-05-15misc: removed executable bits from source filesRay Kinsella1-0/+0
Identified and removed executable bit from source files in the tree. find . -perm 755 -name *.[ch] -exec chmod a-x {} \; Type: improvement Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: I00710d59fcc46ce5be5233109af4c8077daff74b
2020-05-10ethernet: fix dmac stride errorZhiyong Yang1-1/+1
Type: fix Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com> Change-Id: I617fb365def22a28d48f75013dea38f8e1703a44
2020-05-08ethernet: fix coverity warningDave Barach1-1/+1
Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I20daa023eed50f8b42e8dc2d17e47a54aa16ae31
2020-05-04ethernet: add sanity checks to p2p_ethernet_add/delDave Barach2-0/+41
Binary API message handlers need to check sw_if_index values. Found in binary api fuzz testing. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I51e717e9260e58a4c36d4d95981fd001be594fed Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-04-22ethernet: leverage vlib_buffer_get_currentZhiyong Yang1-4/+4
Type: improvement Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com> Change-Id: I0eaedeee03dd3b4453edec7fca2a5c741a98de23
2020-04-22ethernet: put vlib_get_buffers togetherZhiyong Yang1-11/+6
The patch brings 0.8 clocks saved per pkt in IPv4 l3fwd case on Skylake. Type: improvement Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com> Change-Id: Ia8d3a27773bf959433380d7c219602b1e4a8e5bd
2020-03-27docs ethernet: add docs for ethernet SectionPaul Vinciguerra1-0/+7
Type: docs Change-Id: I6ad92b35df3e0fecb1334511625eacf3e3d8925f Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-03-18ethernet: Copy only 6 bytes of mac address into a u64Jon Loeliger1-3/+3
Rather than leaving 2 bytes of junk in the upper word of a mac address represented as a u64, zero them out. That way later compairsons stand a chance of matching when deleting a bridge's arp termination entries. The volatile qualifier shouldn't be needed here, but without it the compiler removes the clib_memcpy() at -O2. Bad compiler. No biscuit. Type: fix commit: faf22cb303b65e2a6bf8dad959d7f5ee6d031c4f Change-Id: Iebcf35fdd421293dccbcaefadef767f7e139438e Signed-off-by: Jon Loeliger <jdl@netgate.com>
2020-02-26ethernet: configure system default ethernet MTUDave Barach3-2/+33
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I9c2081c56cfbf61df7e5170002f5f65902f49942
2020-02-24ethernet: trivial additionsNeale Ranns2-0/+9
Type: improvement - macros to identify SENDER and TARGET in ARP header - count the number of bits set in a mac_address Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Id31e27a4f5f01a8cfb70d3798416bb2519981654
2019-12-17ip: Protocol Independent IP NeighborsNeale Ranns8-3208/+212
Type: feature - ip-neighbour: generic neighbour handling; APIs, DBs, event handling, aging - arp: ARP protocol implementation - ip6-nd; IPv6 neighbor discovery implementation; separate ND, MLD, RA - ip6-link; manage link-local addresses - l2-arp-term; events separated from IP neighbours, since they are not the same. vnet retains just enough education to perform ND/ARP packet construction. arp and ip6-nd to be moved to plugins soon. Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-10api: multiple connections per processDave Barach1-1/+1
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
2019-11-27misc: add address sanitizer heap instrumentationBenoît Ganne1-0/+1
Introduce AddressSanitizer support: https://github.com/google/sanitizers/ This starts with heap instrumentation. vlib_buffer, bihash and stack instrumentation should follow. Type: feature Change-Id: I7f20e235b2f79db72efd0e756f22c75f717a9884 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-11-26ethernet: all dmac checks include secondary addrsMatthew Smith1-19/+106
Type: feature In ethernet_input_inline(), when verifying that the destination mac address on a received packet matches the mac address of the interface where the packet was received, check the secondary addresses on the interface if the primary address does not match. This was done previously for eth_input_single_int(). Change-Id: I45716184dd789d83852271f9c79cedf5f6cbf75b Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-11-26fib: Table ReplaceNeale Ranns2-37/+0
Type: feature from the API doc, a table replace is: " The use-case is that, for some unspecified reason, the control plane has a very different set of entries it wants in the table than VPP currently has. The CP would thus like to 'replace' VPP's current table only by specifying what the new set of entries shall be, i.e. it is not going to delete anything that already eixts. the CP delcartes the start of this procedure with this begin_replace API Call, and when it has populated all the entries it wants, it calls the below end_replace API. From this point on it is of coursce free to add and delete entries as usual. The underlying mechanism by which VPP implements this replace is purposefully left unspecified. " In the FIB, the algorithm is implemented using mark and sweep. Algorithm goes: 1) replace_begin: this marks all the entries in that table as 'stale' 2) download all the entries that should be in this table - this clears the stale flag on those entries 3) signal the table converged: ip_table_replace_end - this removes all entries that are still stale this procedure can be used when an agent first connects to VPP, as an alternative to dump and diff state reconciliation. Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-25vlib: autogenerate <node> before <last-in-arc> constraintsDave Barach1-1/+1
If an arc declaration includes '.last_in_arc = "some-node"', assume that folks mean it and add explicit ordering constraints. Fix the "arp" arc declaration which claimed that the arc ends at arp-disabled, but the arc really ends at error-drop. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ie2de1fb30091671cbc7c62770903a2e05987f141
2019-11-20classify: per-interface rx/tx pcap capture filtersDave Barach1-2/+12
Finish the feature, and fix a couple of doc bugs Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I2c62745fda137776204c8fc4fca0e7e288051573
2019-10-29ethernet: VNET API to create sub-interfacesNeale Ranns2-0/+45
Type: refactor Change-Id: I37899a9c1c2b0790bee90b84aec6b51cdd5236b4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-03ethernet: fix dmac filter coverity warningMatthew Smith1-1/+1
Static analysis says that a possibly null pointer is dereferenced. Check it first. Type: fix Change-Id: I3d1a1548162d1dfc26f19fbcf159f0f1f91eb7c4 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-10-02ethernet: dmac filter checks secondary mac addrsMatthew G Smith3-34/+186
Maintain a list of secondary MAC addresses on ethernet_interface_t. In ethernet-input dmac filtering, If packets do not match the primary interface hardware address, check to see if they match the other addresses. Type: feature Change-Id: Ie0edf45cae0d85c038a61086c47b3ae82d7e162d Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-09-26misc: add vnet classify filter set supportDave Barach1-4/+2
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I79b216d2499df143f53977e5b70382f6f887e0bc
2019-09-24vlib: add flag to explicitelly mark nodes which can init per-node packet traceDamjan Marion1-0/+1
Type: feature Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-09-23misc: unify pcap rx / tx / drop traceDave Barach1-8/+8
Use a single vnet_pcap_t in vlib_global_main, specifically to support unified tracing Update sphinx docs, doxygen tags Type: refactor Ticket: VPP-1776 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Id15d41a596712968c0714cef1bd2cd5bc9cbdd55
2019-09-20misc: classifier-based packet trace filterDave Barach1-1/+15
See .../src/vnet/classify/trace_classify.h for the business end of the scheme. It would be best to hash pkts, prefetch buckets, and do the primary table lookups two at a time. The inline as given works, but perf tuning will be required. "At least it works..." Add "classify filter" debug cli, for example: classify filter mask l3 ip4 src dst \ match l3 ip4 dst 192.168.2.10 src 192.168.1.10 Add "pcap rx | tx trace ... filter" to use the current classify filter chain Patch includes sphinx documentation and doxygen tags. Next step: device-driver integration Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I05b1358a769f61e6d32470e0c87058f640486b26
2019-09-16api: autogenerate api trace print/endianOle Troan2-1/+28
In addition to the external vppapitrace tool, VPP itself supports dumping of API trace files. In two formats, "custom-dump" and "dump". "dump" gives a human friendly list, and "custom-dump" is meant to give a list of commands that can be fed to VAT. This patch only deals with "dump". Prior to this fix, auto-generation was only done for the basic types. This fix adds support for any type, including lists, and supports pretty-printing of enums, strings, IP addresses, MAC addresses and so on. Usage: api trace dump <api-trace-file> For example Change-Id: I4e485680e6dcfce7489299ae6cf31d835071ac40 ---------- trace 48 ----------- vl_api_sw_interface_set_flags_t: _vl_msg_id: 75 client_index: 0 context: 10 sw_if_index: 1 flags: IF_STATUS_API_FLAG_ADMIN_UP ---------- trace 49 ----------- vl_api_sw_interface_add_del_address_t: _vl_msg_id: 88 client_index: 0 context: 11 sw_if_index: 1 is_add: 1 del_all: 0 prefix: 172.16.1.1/24 ---------- trace 51 ----------- vl_api_cli_inband_t: _vl_msg_id: 819 client_index: 0 context: 13 cmd: packet-generator capture pg0 pcap /tmp/vpp-unittest-TestMAP-YhcmDX/pg0_out.pcap disable ---------- trace 58 ----------- vl_api_ip_neighbor_add_del_t: _vl_msg_id: 199 client_index: 0 context: 20 is_add: 1 neighbor: sw_if_index: 2 flags: IP_API_NEIGHBOR_FLAG_NONE mac_address: 0202.0000.ff02 ip_address: fd01:2::2 Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I5556d06008de2762e7c2d35a8b0963ae670b3db1 Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2019-09-04ethernet: move dmac filtering to inline functionMatthew Smith1-56/+63
In eth_input_process_frame(), destination MAC addresses are compared to the interface hardware address in a loop. Move this to a separate inline function to facilitate making changes to the filtering logic more cleanly. Type: refactor Change-Id: I0978f01667e78af5214dbbc9ba223f5b84ce6b7e Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-09-03ethernet: fix dmac check avx2 loop conditionMatthew Smith1-1/+1
In eth_input_process_frame(), a loop which checks the destination MAC address of received packets had a different condition for avx2 than it did for the non-avx2 version of the loop. It could result in one unnecessary execution of the loop body after all packets had been processed. Type: fix Fixes: 8d6f34e2b1cbfde5702e88686631527d5e1e10a0 Change-Id: Ib673f45917a0dea461987fdc8f0ca318b749fb1a Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-08-20api: Cleanup APIs interface.apiJakub Grajciar1-0/+1
Use of consistent API types for interface.api Type: fix Change-Id: I88206d7d0907cffd564031f73c9a996df2e5e21a Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-08-06ethernet: change to mark the CFI bit in the L2 header.Prashant Maheshwari1-3/+3
Type: fix Fixes: 039cbfe2 Signed-off-by: Prashant Maheshwari <pmahesh2@cisco.com> Change-Id: Idca91c73758824688dd6ce61df994be66753d838
2019-08-02ethernet: fix ARP feature arc definitionDave Barach1-2/+9
This patch gets rid of an ugly warning during vpp startup: "vnet_feature_init:143: WARNING: arp arc: last node is arp-disabled, but expected error-drop!" Type: fix Fixes: 1ff56f00ca015e82ef29955986e503913d1c3b86 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I80914a3c113c090a09bd5a5131e39f036871d92e
2019-08-01ethernet: Fix node ordering on ARP feautre ARCNeale Ranns1-2/+13
Type: fix Fixes: fe2fff37 this improves the tracing for dropped ARP packets Change-Id: Iefd0391e349fc54f1beebda403b2349534b20c48 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-15interface: fix issue that pcap rx/tx trace not available when there are ↵Wei CHEN1-4/+5
worker threads Type: fix Change-Id: Ie9a3a78b45b53344a0a5d7e2027c0e0354a49ebe Signed-off-by: Wei CHEN <weichen@astri.org>
2019-07-10ip: fix show ip neigh vector read overflowBenoît Ganne1-19/+6
Both format_ethernet_arp_ip4_entry() and format_ip6_neighbor_ip6_entry() used %s to format flags which is a vector and not a null-terminated C-string. Introduce format_ip_neighbor_flags() instead. Type: fix Fixes: 102ec52bc4 Change-Id: I0c9349fefbeb76471933de358acceb50512a21aa Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-07-05ethernet: ARP disabled nodeNeale Ranns1-15/+106
Type: feature improve the tracing from: 00:00:01:259665: pg-input stream pcap3, 42 bytes, 3 sw_if_index current data 0, length 42, buffer-pool 0, ref-count 1, trace handle 0x0 ARP: 02:03:00:00:ff:02 -> ff:ff:ff:ff:ff:ff request, type ethernet/IP4, address size 6/4 02:03:00:00:ff:02/172.16.3.5 -> 00:00:00:00:00:00/172.16.2.1 00:00:01:259690: ethernet-input frame: flags 0x1, hw-if-index 3, sw-if-index 3 ARP: 02:03:00:00:ff:02 -> ff:ff:ff:ff:ff:ff 00:00:01:259702: arp-input request, type ethernet/IP4, address size 6/4 02:03:00:00:ff:02/172.16.3.5 -> 00:00:00:00:00:00/172.16.2.1 00:00:01:259710: error-drop rx:pg2 00:00:01:259717: drop null-node: blackholed packets to 00:00:01:283323: pg-input stream pcap3, 42 bytes, 3 sw_if_index current data 0, length 42, buffer-pool 0, ref-count 1, trace handle 0x0 ARP: 02:03:00:00:ff:02 -> ff:ff:ff:ff:ff:ff request, type ethernet/IP4, address size 6/4 02:03:00:00:ff:02/172.16.3.5 -> 00:00:00:00:00:00/172.16.2.1 00:00:01:283348: ethernet-input frame: flags 0x1, hw-if-index 3, sw-if-index 3 ARP: 02:03:00:00:ff:02 -> ff:ff:ff:ff:ff:ff 00:00:01:283360: arp-input request, type ethernet/IP4, address size 6/4 02:03:00:00:ff:02/172.16.3.5 -> 00:00:00:00:00:00/172.16.2.1 00:00:01:283369: arp-disabled request, type ethernet/IP4, address size 6/4 02:03:00:00:ff:02/172.16.3.5 -> 00:00:00:00:00:00/172.16.2.1 00:00:01:283374: error-drop rx:pg2 00:00:01:283380: drop arp-disabled: ARP Disabled on this interface Change-Id: I49b915b84cf56d6c138dedd8a596c045c150c4fb Signed-off-by: Neale Ranns <nranns@cisco.com>