Age | Commit message (Collapse) | Author | Files | Lines |
|
Make it shorter to type, easier to debug, make adding callbacks in
future simpler.
Type: improvement
Change-Id: I6cdd6375e36da23bd452a7c7273ff42789e94433
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Change-Id: I231f782b3c56dc2b10321e4569ac7acdad1c11da
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Change-Id: Iac01d7830b53819ace8f199554be10ab89ecdb97
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
When the local MAC address of an interface changes the rewrite strings
of all adjacency types need to be updated - this patch fixes the missing
case of incomplete adjacencies.
I moved the update of all adj types into the adj module, since if the
complete adjs were done by the ip-neighbour module and incomplete ones
by adj module, that would mean two walks of the adj DB, as it is not
possible to walk only a specific type.
UT is updated to include the missing case.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com>
Change-Id: I36af94976c645bdd0d4d3bc0093b24d7d077e9d7
|
|
Type: refactor
Change-Id: Id10cbf52e8f2dd809080a228d8fa282308be84ac
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
These file are no longer needed
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I34f8e0b7e17d9e8c06dcd6c5ffe51aa273cdec07
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Iacaefbf04834f000a14f151c4b848f280ac46d63
|
|
Type: style
reduce the number of files recompiled after changing pg.h from 1110 to
102.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I50611eba818eeb3a2dffd437a3c72c77766bed80
|
|
Type: fix
Change-Id: Ic32550ee9c5d76d232d8b67a7810611f6c8b9177
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
This patch adds flags to represent the modern NICs capabilities.
Change-Id: I96d38d9ab7eac55974d72795cd100d8337168e1e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
It naturally belogns there...
Type: refactor
Change-Id: I05f7ba01103a5e9b3756f1ea69c8cc5d8f26f0a0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I6a3348c7edd1cce6b407d336443103f77392bc5d
|
|
Type: fix
Change-Id: I269214e3eae72e837f25ee61d714556d976d410f
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
ethernet dataplane loads MAC addresses as 64-bits loads for efficiency.
We must make sure it is valid, especially for the vector of secondary
MACs.
Type: fix
Change-Id: I851e319b8a973c154e85ff9f05f3b8e385939788
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
When using classifier to filter traces, not all packets will be traced.
In that case, we should only count traced packets.
Type: fix
Change-Id: I87d1e217b580ebff8c6ade7860eb43950420ae78
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Due to confusion between ethernet flags and hw interface flags, DMAC
filtering was not happening, most of the time.
Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com>
Change-Id: I95209e1ea0f95f9be0b1a82ec9fcbc80955428d2
|
|
Type: improvement
- cache the values form the BD on the input config to avoid loading
- avoid the short write long read on the sequence number
- use vlib_buffer_enqueue_to_next
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I33442b9104b457e4c638d26e9ad3bc965687a0bc
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ic6c76b65e2dcc08916373153944507a297c962c0
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ibad744788e200ce012ad88ff59c2c34920742454
|
|
Fix and optimize DMAC check in ethernet-input node to utilize NIC or
driver which support L3 DMAC-filtering mode so that DMAC check can be
bypassed safely for interfaces/sub-interfaces in L3 mode.
Checking of interface in L3-DMAC-filtering state to avoid DMAC check
require the following:
a) Fix interface driver init sequence for devices which supports L3
DMAC-filtering to indicate its capability and initialize interface
to L3 DMAC-filtering state.
b) Fix ethernet_set_flags() function and its associated callback
flags_change() functions registered by various drivers in interface
infra to provide proper L3 DMAC filtering status.
Maintain interface/sub-interface L3 config count so DMAC checks can be
bypassed if L3 forwarding is not setup on any main/sub-interfaces.
Type: fix
Ticket: VPP-1868
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
|
|
Identified and removed executable bit from source files in the tree.
find . -perm 755 -name *.[ch] -exec chmod a-x {} \;
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I00710d59fcc46ce5be5233109af4c8077daff74b
|
|
Type: fix
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: I617fb365def22a28d48f75013dea38f8e1703a44
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I20daa023eed50f8b42e8dc2d17e47a54aa16ae31
|
|
Binary API message handlers need to check sw_if_index
values.
Found in binary api fuzz testing.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I51e717e9260e58a4c36d4d95981fd001be594fed
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: I0eaedeee03dd3b4453edec7fca2a5c741a98de23
|
|
The patch brings 0.8 clocks saved per pkt in IPv4 l3fwd case on Skylake.
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: Ia8d3a27773bf959433380d7c219602b1e4a8e5bd
|
|
Type: docs
Change-Id: I6ad92b35df3e0fecb1334511625eacf3e3d8925f
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Rather than leaving 2 bytes of junk in the upper word
of a mac address represented as a u64, zero them out.
That way later compairsons stand a chance of matching
when deleting a bridge's arp termination entries.
The volatile qualifier shouldn't be needed here, but
without it the compiler removes the clib_memcpy() at -O2.
Bad compiler. No biscuit.
Type: fix
commit: faf22cb303b65e2a6bf8dad959d7f5ee6d031c4f
Change-Id: Iebcf35fdd421293dccbcaefadef767f7e139438e
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I9c2081c56cfbf61df7e5170002f5f65902f49942
|
|
Type: improvement
- macros to identify SENDER and TARGET in ARP header
- count the number of bits set in a mac_address
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Id31e27a4f5f01a8cfb70d3798416bb2519981654
|
|
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
|
|
Introduce AddressSanitizer support: https://github.com/google/sanitizers/
This starts with heap instrumentation. vlib_buffer, bihash and stack
instrumentation should follow.
Type: feature
Change-Id: I7f20e235b2f79db72efd0e756f22c75f717a9884
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
In ethernet_input_inline(), when verifying that the destination
mac address on a received packet matches the mac address of the
interface where the packet was received, check the secondary
addresses on the interface if the primary address does not match.
This was done previously for eth_input_single_int().
Change-Id: I45716184dd789d83852271f9c79cedf5f6cbf75b
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
from the API doc, a table replace is:
"
The use-case is that, for some unspecified reason, the control plane
has a very different set of entries it wants in the table than VPP
currently has. The CP would thus like to 'replace' VPP's current table
only by specifying what the new set of entries shall be, i.e. it is not
going to delete anything that already eixts.
the CP delcartes the start of this procedure with this begin_replace
API Call, and when it has populated all the entries it wants, it calls
the below end_replace API. From this point on it is of coursce free
to add and delete entries as usual.
The underlying mechanism by which VPP implements this replace is
purposefully left unspecified.
"
In the FIB, the algorithm is implemented using mark and sweep.
Algorithm goes:
1) replace_begin: this marks all the entries in that table as 'stale'
2) download all the entries that should be in this table
- this clears the stale flag on those entries
3) signal the table converged: ip_table_replace_end
- this removes all entries that are still stale
this procedure can be used when an agent first connects to VPP,
as an alternative to dump and diff state reconciliation.
Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
If an arc declaration includes '.last_in_arc = "some-node"', assume
that folks mean it and add explicit ordering constraints.
Fix the "arp" arc declaration which claimed that the arc ends at
arp-disabled, but the arc really ends at error-drop.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ie2de1fb30091671cbc7c62770903a2e05987f141
|
|
Finish the feature, and fix a couple of doc bugs
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2c62745fda137776204c8fc4fca0e7e288051573
|
|
Type: refactor
Change-Id: I37899a9c1c2b0790bee90b84aec6b51cdd5236b4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Static analysis says that a possibly null pointer is dereferenced.
Check it first.
Type: fix
Change-Id: I3d1a1548162d1dfc26f19fbcf159f0f1f91eb7c4
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Maintain a list of secondary MAC addresses on ethernet_interface_t.
In ethernet-input dmac filtering, If packets do not match the
primary interface hardware address, check to see if they match the
other addresses.
Type: feature
Change-Id: Ie0edf45cae0d85c038a61086c47b3ae82d7e162d
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I79b216d2499df143f53977e5b70382f6f887e0bc
|
|
Type: feature
Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Use a single vnet_pcap_t in vlib_global_main, specifically to support
unified tracing
Update sphinx docs, doxygen tags
Type: refactor
Ticket: VPP-1776
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Id15d41a596712968c0714cef1bd2cd5bc9cbdd55
|
|
See .../src/vnet/classify/trace_classify.h for the business end
of the scheme.
It would be best to hash pkts, prefetch buckets, and do the primary
table lookups two at a time. The inline as given works, but perf
tuning will be required. "At least it works..."
Add "classify filter" debug cli, for example:
classify filter mask l3 ip4 src dst \
match l3 ip4 dst 192.168.2.10 src 192.168.1.10
Add "pcap rx | tx trace ... filter" to use the current classify filter chain
Patch includes sphinx documentation and doxygen tags.
Next step: device-driver integration
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I05b1358a769f61e6d32470e0c87058f640486b26
|
|
In addition to the external vppapitrace tool, VPP itself supports dumping of API trace files.
In two formats, "custom-dump" and "dump". "dump" gives a human friendly list,
and "custom-dump" is meant to give a list of commands that can be fed to VAT.
This patch only deals with "dump".
Prior to this fix, auto-generation was only done for the basic types.
This fix adds support for any type, including lists, and supports pretty-printing
of enums, strings, IP addresses, MAC addresses and so on.
Usage: api trace dump <api-trace-file>
For example
Change-Id: I4e485680e6dcfce7489299ae6cf31d835071ac40
---------- trace 48 -----------
vl_api_sw_interface_set_flags_t:
_vl_msg_id: 75
client_index: 0
context: 10
sw_if_index: 1
flags: IF_STATUS_API_FLAG_ADMIN_UP
---------- trace 49 -----------
vl_api_sw_interface_add_del_address_t:
_vl_msg_id: 88
client_index: 0
context: 11
sw_if_index: 1
is_add: 1
del_all: 0
prefix: 172.16.1.1/24
---------- trace 51 -----------
vl_api_cli_inband_t:
_vl_msg_id: 819
client_index: 0
context: 13
cmd: packet-generator capture pg0 pcap /tmp/vpp-unittest-TestMAP-YhcmDX/pg0_out.pcap disable
---------- trace 58 -----------
vl_api_ip_neighbor_add_del_t:
_vl_msg_id: 199
client_index: 0
context: 20
is_add: 1
neighbor:
sw_if_index: 2
flags: IP_API_NEIGHBOR_FLAG_NONE
mac_address: 0202.0000.ff02
ip_address: fd01:2::2
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I5556d06008de2762e7c2d35a8b0963ae670b3db1
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
In eth_input_process_frame(), destination MAC addresses are
compared to the interface hardware address in a loop. Move
this to a separate inline function to facilitate making changes
to the filtering logic more cleanly.
Type: refactor
Change-Id: I0978f01667e78af5214dbbc9ba223f5b84ce6b7e
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
In eth_input_process_frame(), a loop which checks the destination
MAC address of received packets had a different condition for avx2
than it did for the non-avx2 version of the loop. It could result
in one unnecessary execution of the loop body after all packets
had been processed.
Type: fix
Fixes: 8d6f34e2b1cbfde5702e88686631527d5e1e10a0
Change-Id: Ib673f45917a0dea461987fdc8f0ca318b749fb1a
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Use of consistent API types for interface.api
Type: fix
Change-Id: I88206d7d0907cffd564031f73c9a996df2e5e21a
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: fix
Fixes: 039cbfe2
Signed-off-by: Prashant Maheshwari <pmahesh2@cisco.com>
Change-Id: Idca91c73758824688dd6ce61df994be66753d838
|
|
This patch gets rid of an ugly warning during vpp startup:
"vnet_feature_init:143: WARNING: arp arc: last node is arp-disabled,
but expected error-drop!"
Type: fix
Fixes: 1ff56f00ca015e82ef29955986e503913d1c3b86
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I80914a3c113c090a09bd5a5131e39f036871d92e
|