Age | Commit message (Collapse) | Author | Files | Lines |
|
operation using (a^a)^(b^b)
Type: fix
Signed-off-by: lijinhui <lijh_7@chinatelecom.cn>
Change-Id: I80783eed2b819a9e6fd4cee973821c9d97c285a6
|
|
Ensure that the ethernet_input_inline_dmac_check which directly derefererences ei,
is called only if ei is set.
Type: fix
Change-Id: I2d3bce63ee457825a5d375a6102225f3abf67703
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Following the discussion during the review
of b46a4e69e5db18ef792415439d04a0ab22c59386,
remove the redundant ei0. This resulted in realization
that in order for this code to do anything useful,
the ei must be always non-zero, so rewrite the logical
condition for it. Also, make it a conjunction which seems simpler
to understand.
Type: improvement
Change-Id: Ibd7b2a63e4aeaf97eb1a98af8e69aed2ff7dd577
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Using "ip neighbor <ip-addr> <mac-addr> static count <count>" to add
static ARP entries will output wrong mac addresses due to lack of
big/little endian conversion. Fix this error by converting mac address
from big endian to little endian before doing the self-increment.
Before patched:
vpp# ip neighbor rdma-0 198.18.1.1 01:aa:bb:cc:dd:e0 static count 5
vpp# show ip neighbor
Time IP Flags Ethernet Interface
4.4400 198.18.1.5 S 05:aa:bb:cc:dd:e0 rdma-0
4.4399 198.18.1.4 S 04:aa:bb:cc:dd:e0 rdma-0
4.4399 198.18.1.3 S 03:aa:bb:cc:dd:e0 rdma-0
4.4399 198.18.1.2 S 02:aa:bb:cc:dd:e0 rdma-0
4.4399 198.18.1.1 S 01:aa:bb:cc:dd:e0 rdma-0
After patched:
vpp# ip neighbor rdma-0 198.18.1.1 01:aa:bb:cc:dd:e0 static count 5
vpp# show ip neighbor
Time IP Flags Ethernet Interface
4.4528 198.18.1.5 S 01:aa:bb:cc:dd:e4 rdma-0
4.4528 198.18.1.4 S 01:aa:bb:cc:dd:e3 rdma-0
4.4528 198.18.1.3 S 01:aa:bb:cc:dd:e2 rdma-0
4.4527 198.18.1.2 S 01:aa:bb:cc:dd:e1 rdma-0
4.4527 198.18.1.1 S 01:aa:bb:cc:dd:e0 rdma-0
Type: fix
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
Change-Id: Iec1e00e381e4aba96639f831e7e42e070be3f278
|
|
Check that the pointer is non-null before dereferencing it.
Type: fix
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I611a1042d08bbe455dd09a4fa5711fe86c440240
|
|
Type: improvement
plus the addition of the 'thorttle' counter of IP6.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ic845247a9f3288caa755c33e79ae2eb6d2029d09
|
|
Type: fix
Fixes: 1cd0e5dd533f
In vnet_eth_register_interface(), max frame size was being used where
frame overhead was intended.
Change-Id: I6e6de25e2d616caaf35730ab3d15235ec679ebdd
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: improvement
Change-Id: I3659de6599f402c92e3855e3bf0e5e3388f2bea0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- per hw-interface-class handlers
- ethernet set_mtu callback
- driver can now refuse MTU change
Type: improvement
Change-Id: I3d37c9129930ebec7bb70caf4263025413873048
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Prep for supporting multiple callbacks, optional args, etc.
Type: improvement
Change-Id: I96244c098712e8213374678623f12527b0e7f387
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Make it shorter to type, easier to debug, make adding callbacks in
future simpler.
Type: improvement
Change-Id: I6cdd6375e36da23bd452a7c7273ff42789e94433
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Change-Id: I231f782b3c56dc2b10321e4569ac7acdad1c11da
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Change-Id: Iac01d7830b53819ace8f199554be10ab89ecdb97
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
When the local MAC address of an interface changes the rewrite strings
of all adjacency types need to be updated - this patch fixes the missing
case of incomplete adjacencies.
I moved the update of all adj types into the adj module, since if the
complete adjs were done by the ip-neighbour module and incomplete ones
by adj module, that would mean two walks of the adj DB, as it is not
possible to walk only a specific type.
UT is updated to include the missing case.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com>
Change-Id: I36af94976c645bdd0d4d3bc0093b24d7d077e9d7
|
|
Type: refactor
Change-Id: Id10cbf52e8f2dd809080a228d8fa282308be84ac
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
These file are no longer needed
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I34f8e0b7e17d9e8c06dcd6c5ffe51aa273cdec07
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Iacaefbf04834f000a14f151c4b848f280ac46d63
|
|
Type: style
reduce the number of files recompiled after changing pg.h from 1110 to
102.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I50611eba818eeb3a2dffd437a3c72c77766bed80
|
|
Type: fix
Change-Id: Ic32550ee9c5d76d232d8b67a7810611f6c8b9177
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
This patch adds flags to represent the modern NICs capabilities.
Change-Id: I96d38d9ab7eac55974d72795cd100d8337168e1e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
It naturally belogns there...
Type: refactor
Change-Id: I05f7ba01103a5e9b3756f1ea69c8cc5d8f26f0a0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I6a3348c7edd1cce6b407d336443103f77392bc5d
|
|
Type: fix
Change-Id: I269214e3eae72e837f25ee61d714556d976d410f
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
ethernet dataplane loads MAC addresses as 64-bits loads for efficiency.
We must make sure it is valid, especially for the vector of secondary
MACs.
Type: fix
Change-Id: I851e319b8a973c154e85ff9f05f3b8e385939788
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
When using classifier to filter traces, not all packets will be traced.
In that case, we should only count traced packets.
Type: fix
Change-Id: I87d1e217b580ebff8c6ade7860eb43950420ae78
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Due to confusion between ethernet flags and hw interface flags, DMAC
filtering was not happening, most of the time.
Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com>
Change-Id: I95209e1ea0f95f9be0b1a82ec9fcbc80955428d2
|
|
Type: improvement
- cache the values form the BD on the input config to avoid loading
- avoid the short write long read on the sequence number
- use vlib_buffer_enqueue_to_next
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I33442b9104b457e4c638d26e9ad3bc965687a0bc
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ic6c76b65e2dcc08916373153944507a297c962c0
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ibad744788e200ce012ad88ff59c2c34920742454
|
|
Fix and optimize DMAC check in ethernet-input node to utilize NIC or
driver which support L3 DMAC-filtering mode so that DMAC check can be
bypassed safely for interfaces/sub-interfaces in L3 mode.
Checking of interface in L3-DMAC-filtering state to avoid DMAC check
require the following:
a) Fix interface driver init sequence for devices which supports L3
DMAC-filtering to indicate its capability and initialize interface
to L3 DMAC-filtering state.
b) Fix ethernet_set_flags() function and its associated callback
flags_change() functions registered by various drivers in interface
infra to provide proper L3 DMAC filtering status.
Maintain interface/sub-interface L3 config count so DMAC checks can be
bypassed if L3 forwarding is not setup on any main/sub-interfaces.
Type: fix
Ticket: VPP-1868
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
|
|
Identified and removed executable bit from source files in the tree.
find . -perm 755 -name *.[ch] -exec chmod a-x {} \;
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I00710d59fcc46ce5be5233109af4c8077daff74b
|
|
Type: fix
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: I617fb365def22a28d48f75013dea38f8e1703a44
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I20daa023eed50f8b42e8dc2d17e47a54aa16ae31
|
|
Binary API message handlers need to check sw_if_index
values.
Found in binary api fuzz testing.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I51e717e9260e58a4c36d4d95981fd001be594fed
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: I0eaedeee03dd3b4453edec7fca2a5c741a98de23
|
|
The patch brings 0.8 clocks saved per pkt in IPv4 l3fwd case on Skylake.
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: Ia8d3a27773bf959433380d7c219602b1e4a8e5bd
|
|
Type: docs
Change-Id: I6ad92b35df3e0fecb1334511625eacf3e3d8925f
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Rather than leaving 2 bytes of junk in the upper word
of a mac address represented as a u64, zero them out.
That way later compairsons stand a chance of matching
when deleting a bridge's arp termination entries.
The volatile qualifier shouldn't be needed here, but
without it the compiler removes the clib_memcpy() at -O2.
Bad compiler. No biscuit.
Type: fix
commit: faf22cb303b65e2a6bf8dad959d7f5ee6d031c4f
Change-Id: Iebcf35fdd421293dccbcaefadef767f7e139438e
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I9c2081c56cfbf61df7e5170002f5f65902f49942
|
|
Type: improvement
- macros to identify SENDER and TARGET in ARP header
- count the number of bits set in a mac_address
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Id31e27a4f5f01a8cfb70d3798416bb2519981654
|
|
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
|
|
Introduce AddressSanitizer support: https://github.com/google/sanitizers/
This starts with heap instrumentation. vlib_buffer, bihash and stack
instrumentation should follow.
Type: feature
Change-Id: I7f20e235b2f79db72efd0e756f22c75f717a9884
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
In ethernet_input_inline(), when verifying that the destination
mac address on a received packet matches the mac address of the
interface where the packet was received, check the secondary
addresses on the interface if the primary address does not match.
This was done previously for eth_input_single_int().
Change-Id: I45716184dd789d83852271f9c79cedf5f6cbf75b
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
from the API doc, a table replace is:
"
The use-case is that, for some unspecified reason, the control plane
has a very different set of entries it wants in the table than VPP
currently has. The CP would thus like to 'replace' VPP's current table
only by specifying what the new set of entries shall be, i.e. it is not
going to delete anything that already eixts.
the CP delcartes the start of this procedure with this begin_replace
API Call, and when it has populated all the entries it wants, it calls
the below end_replace API. From this point on it is of coursce free
to add and delete entries as usual.
The underlying mechanism by which VPP implements this replace is
purposefully left unspecified.
"
In the FIB, the algorithm is implemented using mark and sweep.
Algorithm goes:
1) replace_begin: this marks all the entries in that table as 'stale'
2) download all the entries that should be in this table
- this clears the stale flag on those entries
3) signal the table converged: ip_table_replace_end
- this removes all entries that are still stale
this procedure can be used when an agent first connects to VPP,
as an alternative to dump and diff state reconciliation.
Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
If an arc declaration includes '.last_in_arc = "some-node"', assume
that folks mean it and add explicit ordering constraints.
Fix the "arp" arc declaration which claimed that the arc ends at
arp-disabled, but the arc really ends at error-drop.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ie2de1fb30091671cbc7c62770903a2e05987f141
|
|
Finish the feature, and fix a couple of doc bugs
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2c62745fda137776204c8fc4fca0e7e288051573
|
|
Type: refactor
Change-Id: I37899a9c1c2b0790bee90b84aec6b51cdd5236b4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Static analysis says that a possibly null pointer is dereferenced.
Check it first.
Type: fix
Change-Id: I3d1a1548162d1dfc26f19fbcf159f0f1f91eb7c4
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Maintain a list of secondary MAC addresses on ethernet_interface_t.
In ethernet-input dmac filtering, If packets do not match the
primary interface hardware address, check to see if they match the
other addresses.
Type: feature
Change-Id: Ie0edf45cae0d85c038a61086c47b3ae82d7e162d
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|