aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/feature/feature.c
AgeCommit message (Collapse)AuthorFilesLines
2021-11-19fib: Don't use [midchain] adjacencies to change an interface's feature arcNeale Ranns1-1/+59
Type: fix Using the adjacency to modify the interface's feature arc doesn't work, since there are potentially more than one adj per-interface. Instead have the interface, when it is created, register what the end node of the feature arc is. This end node is then also used as the interface's tx node (i.e. it is used as the adjacency's next-node). rename adj-midhcain-tx as 'tunnel-output', that's a bit more intuitive. There's also a fix in config string handling to: 1- prevent false sharing of strings when the end node of the arc is different. 2- call registered listeners when the end node is changed For IPSec the consequences are that one cannot provide per-adjacency behaviour using different end-nodes - this was previously done for the no-SA and an SA with no protection. These cases are no handled in the esp-encrypt node. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: If3a83d03a3000f28820d9a9cb4101d244803d084
2020-11-05feature: reset interface feature arc on interface deletionBenoît Ganne1-16/+51
When removing an interface we must reset all per-interface per-feature arc data to ensure we do not get wrong feature arc config data when the sw_if_index is recycled. Type: fix Change-Id: I8c9d850d7c62b7b77193da4258ab5fb9bdda85a6 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-07-29feature: add vnet_feature_is_enabledDave Barach1-1/+56
A predicate function which says whether a given sw_if_index has a certain feature enabled. int vnet_feature_is_enabled (const char *arc_name, const char *feature_node_name, u32 sw_if_index) returns 1 if the feature is enabled returns 0 if the feature is not enabled returns VNET_API_ERROR_INVALID_VALUE if the arc name is not found returns VNET_API_ERROR_INVALID_VALUE_2 if the feature node name is not found returns VNET_API_ERROR_INVALID_SW_IF_INDEX if the sw_if_index is not found Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Id9ed53e2ae9252efc750ae80fd610456b95cefa4
2020-05-13feature: Config end nodes are user specificNeale Ranns1-6/+12
Type: fix it is possible for a user to change the end node of a feature arc, but this change should only apply to that 'instnace' of the arc, not all arcs. for example, if a tunnel has its ipx-output end node changed to adj-midchain-tx, this shouldn't affect all ipx-output arcs. obviously... Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I41daea7ba6907963e42140307d065c8bcfdcb585
2020-05-04fib: midchain adjacency optimisationsNeale Ranns1-0/+29
Type: improvement - inline some common encap fixup functions into the midchain rewrite node so we don't incur the cost of the virtual function call - change the copy 'guess' from ethernet_header (which will never happen) to an ip4 header - add adj-midchain-tx to multiarch sources - don't run adj-midchain-tx as a feature, instead put this node as the adj's next and at the end of the feature arc. - cache the feature arc config index (to save the cache miss going to fetch it) - don't check if features are enabled when taking the arc (since we know they are) the last two changes will also benefit normal adjacencies taking the arc (i.e. for NAT, ACLs, etc) for IPSec: - don't run esp_encrypt as a feature, instead when required insert this node into the adj's next and into the end of the feature arc. this implies that encrypt is always 'the last feature' run, which is symmetric with decrypt always being the first. - esp_encrpyt for tunnels has adj-midchain-tx as next node Change-Id: Ida0af56a704302cf2d7797ded5f118a781e8acb7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-17feature: add descriptive cli command output for 'set interface feature'Paul Vinciguerra1-7/+23
DBGvpp# set interface feature local0 arp-foo arc bad-arc set interface feature: Unknown arc name (bad-arc)... DBGvpp# set interface feature local0 arp-foo arc arp set interface feature: Feature (arp-foo) not registered to arc (arp)... See 'show features verbose' for valid feature/arc combinations. DBGvpp# set interface feature local0 arp-disabled arc arp Type: fix Change-Id: I036bb2a75dd2d40f6901e4fde3eb14925238e19b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-12-17feature: add [verbose] to show features helpPaul Vinciguerra1-1/+1
Type: fix Change-Id: Idf694477c18852e5541c28a493a56b302122e46c Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-12-03fib feature: Code mechanics to decouple dependency of feature on adjNeale Ranns1-2/+31
Type: refactor Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I1d8b88fe1eefc850865297b4f025b97e6373a6bd
2019-11-25vlib: autogenerate <node> before <last-in-arc> constraintsDave Barach1-0/+1
If an arc declaration includes '.last_in_arc = "some-node"', assume that folks mean it and add explicit ordering constraints. Fix the "arp" arc declaration which claimed that the arc ends at arp-disabled, but the arc really ends at error-drop. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ie2de1fb30091671cbc7c62770903a2e05987f141
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-1/+1
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-26Add a feature arc consistency checkDave Barach1-0/+14
Verify that last node in the computed feature order matches reality. This check doesn't make sense in all cases, so we skip it if the newly-added vnet_feature_arc_registration_t ".last_in_arc" datum is a NULL pointer. Change-Id: Ia99c3e2b2da2e4780a7d5bc71670c5742a66fef2 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-19Improve feature arc order constraint specificationDave Barach1-5/+32
Add the VNET_FEATURE_ARC_ORDER macro, which allows specification of bulk order constraints. Here's an example: VNET_FEATURE_ARC_ORDER(ip4_unicast_arc_order, static) = { .arc_name = "ip4-unicast", .node_names = VNET_FEATURES ("ip4-flow-classify", "ip4-inacl", "ip4-source-check-via-rx", "ip4-source-check-via-any", "ip4-source-and-port-range-check-rx", "ip4-policer-classify", "ipsec4-input", "vpath-input-ip4", "ip4-vxlan-bypass", "ip4-not-enabled", "ip4-lookup"), }; Simply list feature nodes in the desired order, and you're done. Multiple macro instances per are are fine / expected / tested. Under the covers: generate "a before b" tuples by chain-dragging across the ordered list. No need to touch existing per-feature constraints. Fixed a long-broken "you lose!" error message. Change-Id: I259282e426fd305e22c8d65886787c41a1d348d3 Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-03VPP-1426: CLI crash on 'set int feature'Paul Vinciguerra1-1/+1
Change-Id: Ib2221a43347c66940b6b5f71914a451ca4627d2f Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-05-27VPP-1294: add missing feature arc constraintDave Barach1-6/+40
the ip4-dhcp-client-detect feature MUST run prior to nat44-out2in, or inbound dhcp broadcast packets will be dropped. Certain dhcp servers answer lease renewal dhcp-request packets with broadcast dhcp-acks, leading to unrecoverable lease loss. In detail, this constraint: VNET_FEATURE_INIT (ip4_snat_out2in, static) = { .arc_name = "ip4-unicast", .node_name = "nat44-out2in", .runs_after = VNET_FEATURES ("acl-plugin-in-ip4-fa"), }; doesn't get the job done: ip4-unicast: [17] nat44-out2in [23] ip4-dhcp-client-detect [26] ip4-not-enabled Add a proper constraint: VNET_FEATURE_INIT (ip4_snat_out2in, static) = { .arc_name = "ip4-unicast", .node_name = "nat44-out2in", .runs_after = VNET_FEATURES ("acl-plugin-in-ip4-fa", "ip4-dhcp-client-detect"), }; and the interface feature order is OK, at least in this regard: ip4-unicast: [17] ip4-dhcp-client-detect [18] nat44-out2in [26] ip4-not-enabled We need to carefully audit (especially) the ip4-unicast feature arc, which has [gasp] 37 features on it! Change-Id: I5e749ead7ab2a25d80839a331de6261e112977ad Signed-off-by: Dave Barach <dave@barachs.net>
2018-05-17Fix failure during enable/disable of featuresMatthew Smith1-3/+3
vnet_feature_enable_disable_with_index() checks the return status of vnet_config_{add,del}_feature(). If the config string heap index returned is the same index that was in use prior to the add/delete, it is concluded that a failure occurred and processing of the feature stops. Sometimes the config index that is returned can legitimately be the same index that was in used before the add/delete. The old list of features can have its heap entry deallocated before a new entry for the new list is allocated. The heap entry for the new list can be the entry that was deallocated while deleting the old one. Make vnet_config_{add,del}_feature() return ~0 on failure. Look for that return value as an indication that an error occurred in vnet_enable_disable_feature_by_index(). Change-Id: I88bb3ff88a76971c1b5e5ece74784ce8ba78373c Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-04-09features: don't break linked list, create separate one for arcDamjan Marion1-3/+3
We need to keep original linked list so destructire can remove entries. Change-Id: I5ff5ca0e1a417d88707255207725bba46433c943 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-03reassembly: bug fixesKlement Sekera1-2/+6
This change fixes a bug which would corrupt features infra by making feature infra resistant to double-removal. It also fixes 'out of memory' issue by properly initializing the bihash tables. Change-Id: I78ac03139234a9a0e0b48e7bdfac1c38a0069e82 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-09-20Add ip6-local feature arcPierre Pfister1-1/+2
ip4-local feature arc existed but not ip6-local one. This patch also adds node name to the 'show ip local' command and fixes a minor include issue in vnet/ip/ip4.h file. Change-Id: I9bb8a7159917d58f89afcce974680de20d946a70 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2017-08-18feature: exit on misconfigured features (VPP-915)Florin Coras1-3/+7
Change-Id: Ifa11f356d727b69cb121a2bf4cfb9d87883f545d Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-03-17Fix IP feature ordering.Neale Ranns1-15/+0
Drop comes before lookup when enabled. is_first_or_last is not required when setting a feature, the anchor is added in find_config_with_features(). Don't make the PG interfaces automatically L3 enabled, this way we can have tests that check the L3 protocol disbaled behaviour. Change-Id: Icef22a920b27ff9cec6ab2da6b05f05c532cb60f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17Cache a 'has-features' flag on the adjacency for faster access. Reclaim the ↵Neale Ranns1-0/+2
node_index memeber from the rewrite for space - this is only used for formtting before: ip4-rewrite * * * * 2.66e1 256.00 after: ip4-rewrite * * * * 2.40e1 256.00 Change-Id: Ic397150727cad38811564777419ad6bd26b8a3a6 Signed-off-by: Neale Ranns <nranns@wasa-ucs-11.cisco.com>
2017-03-02VPP-648: CLI Memory leak with invalid parameterBilly McFall1-0/+1
After VPP-635 was merged, did one more pass. While the code was waiting to be merged, a few changes were merged to master with the same issue. This is a few additional changes addressing the same issue. See VPP-635. Change-Id: I7abeac5c260c1e2e9d9d318fd1aae24cd6932efc Signed-off-by: Billy McFall <bmcfall@redhat.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+463
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>