aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/fib/fib_entry.h
AgeCommit message (Collapse)AuthorFilesLines
2017-11-26FIB: optimise for src memory allocationsNeale Ranns1-4/+40
Most FIB entries will only ever have one source providing forwarding information. Currently the source infom is stored in a vector of sources on the FIB entry. Change this to a union of one source inline and a vector. This saves the need to alloc a vector of sources for each FIB entry. before: vpp# ip route add count 1500000 1.0.0.1/32 via 10.10.10.2 loop0 4.392857e5 routes/sec vpp# ip route del count 1500000 1.0.0.1/32 via 10.10.10.2 loop0 9.175464e5 routes/sec vpp# ip route add count 1500000 1.0.0.1/32 via 10.10.10.2 loop0 5.193375e5 routes/sec vpp# sh fib mem FIB memory Name Size in-use /allocated totals Entry 72 1500011/ 1500011 108000792/108000792 Entry Source 32 1500011/ 1500011 48000352/48000352 after: vpp# ip route add count 1500000 1.0.0.1/32 via 10.10.10.2 loop0 4.726560e5 routes/sec vpp# ip route del count 1500000 1.0.0.1/32 via 10.10.10.2 loop0 1.041629e6 routes/sec vpp# ip route add count 1500000 1.0.0.1/32 via 10.10.10.2 loop0 5.702895e5 routes/sec vpp# sh fib mem FIB memory Name Size in-use /allocated totals Entry 96 1500011/ 1500011 144001056/144001056 Entry Source 32 0 / 0 0/0 Change-Id: Ic71e413eaff1ec152656beda3b94186f7894ea49 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-09BIERNeale Ranns1-0/+5
- see draft-ietf-bier-mpls-encapsulation-10 - midpoint, head and tail functions - supported payload protocols; IPv4 and IPv6 only. Change-Id: I59d7363bb6fdfdce8e4016a68a9c8f5a5e5791cb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-25L3 proxy FIB source for container networkingAndrew Yourtchenko1-0/+5
Change-Id: I4164c4c19c8dbfd73e6ddf94a12056325cc093b9 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-09-11FIB table add/delete APINeale Ranns1-0/+1
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-03DHCP Client: receive unicast ACKsNeale Ranns1-7/+2
despite VPP DHCP client setting neither ciaddr nor giaddr and setting the broadcast bit (see RFC 2131 section 4.1) some DHCP servers will still send a unicast DCHPACK. So as not to drop this VPP must have both 1) a receive FIB entry for the OFFERED IP adress and 2) a 'don't drop me because of uRPF' FIB entry for the DHCP server's address. Change-Id: I167d858deb45629318cbdccf5bf67d971730a42f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-23ARP/ND entries for the same address on different interfaces (VPP-848)Neale Ranns1-1/+1
there are, intentionally, no validation checks in the ARP/ND code to prevent an ARP/ND entry from being installed for an address that is not local to the interface's sub-net. This is ok, since the adjacency/FIB code is designed to handle this case using the 'refinement' criteria - i.e. only installing a FIB entry for the address if the address 'refines' (i.e. is more specific than) the interface's sub-net. However, the refinement criteria currently operates on the FIB entry's prefix (which is a /32, so on the address) and not on the next-hop in the path. So, enter multiple ARP entries for the same address on different links, and this refinement criteria uses only the last added path, and so will remove the FIB entry should the ARP entries be added in the 'wrong' order. This fix updates the refinement criteria to work on each path of the FIB entry. The entry is installed if one of the paths refines the covers and only paths refining the cover contribute forwarding. Per-path refinement checks are stored in path-extensions. The patch is rather large as path-extension, which were previously used only for out-going MPLS labels, have been generalized. Change-Id: I00be359148cb948c32c52109e832a70537a7920a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-05First commit SR MPLSPablo Camarillo1-4/+4
Change-Id: I961685a2a0e4c314049444c64eb6ccf877c278dd Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
2017-04-26IP Flow Hash Config fixesNeale Ranns1-0/+2
- the flow hash config is (and was) cached on the load-balance object so the fib_table_t struct is not used a switch time. Therefore changes to the table's flow hash config need to be propagated to all load-balances and hance all FIB entries in the table. - enable API for setting the IPv6 table flow hash config - use only the hash config in the fib_table_t object and not on the ipX_fib_t - add tests. Change-Id: Ib804c11162c6d4972c764957562c372f663e05d4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-3/+10
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-06BFD-FIB interactionsNeale Ranns1-0/+1
- single-hop BFD: attach a delegate to the appropriate adjacency - multi-hop BFD [not supported yet]: attach a delegate to the FIB entry. adjacency/fib_entry state tracks the BFD session state. when the state is down the object does not contribute forwarding hence and hence dependent objects will not use it. For example, if a route is ECMP via two adjacencies and one of them is BFD down, then only the other is used to forward (i.e. we don't drop half the traffic). Change-Id: I0ef53e20e73b067001a132cd0a3045408811a822 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-08Proxy ND (RFC4389 - or a sub-set thereof). This allows the 'emulation' of ↵Neale Ranns1-0/+5
bridging. That is hosts in one sub-net reachable via differenet interfaces. Introducate a new API command: ip6 nd proxy <host-address> <interface> this indicates 2 things; 1) that host <host-address> is reachable out of interface <interface>. VPP will thus install that route. 2) NS requests sent to <host-address> will be responeded to (i.e. proxied). Change-Id: I863f967fdb5097ab3b574769c70afdbfc8d5478a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-06ioam: manycast using iOAM and SR (VPP-628)Shwetha Bhandari1-1/+8
Change-Id: I6d2afda991d771fb4a89fc3f6544f8e940a9b9f0 Signed-off-by: Shwetha Bhandari <shwethab@cisco.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns1-1/+1
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+530
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>