aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/fib/fib_path.c
AgeCommit message (Collapse)AuthorFilesLines
2021-06-09fib: make sure dpo is valid even when path pool expandsBenoît Ganne1-8/+22
The path pool can expand during in fib_path_attached_next_hop_get_adj() when calling adj_nbr_add_or_lock(). If dpo points to a path->fp_dpo, its reference becomes stale. Use a temporary copy instead. Type: fix Change-Id: Ie966cb5f3f7b416425964dca12f1f586bfc2010c Signed-off-by: Benoît Ganne <bganne@cisco.com> (cherry picked from commit e9d7b0982d7bd189097260b6581abff472da251a)
2021-02-15ip: Path MTUNeale Ranns1-0/+1
Type: feature Support setting the MTU for a peer on an interface. The minimum value of the path and interface MTU is used at forwarding time. the path MTU is specified for a given peer, by address and table-ID. In the forwarding plane the MTU is enfored either: 1 - if the peer is attached, then the MTU is set on the peer's adjacency 2 - if the peer is not attached, it is remote, then a DPO is added to the peer's FIB entry to perform the necessary fragmentation. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
2020-12-14misc: move to new pool_foreach macrosDamjan Marion1-3/+3
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-12-11fib: remove unsued path flagNeale Ranns1-5/+0
Type: refactor Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Ic4ef53f49102d7b5061f1b6d3a1d0c8427b9d1f7
2020-12-11fib: Remove unused BIER variablesNeale Ranns1-11/+5
Type: refactor Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Idf17c3c02fb77fcadf69a9164abd4da35289aaed
2020-12-08fib: Source Address SelectionNeale Ranns1-2/+14
Type: feature Use the FIB to provide SAS (in so far as it is today) - Use the glean adjacency as the record of the connected prefixes = there's a glean per-{interface, protocol, connected-prefix} - Keep the glean up to date with whatever the recieve host prefix is (since it can change) Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: I0f3dd1edb1f3fc965af1c7c586709028eb9cdeac
2020-11-16fib: remove misleading FIB_PATH_TYPE_LASTBenoît Ganne1-14/+0
FIB_PATH_TYPE_LAST seems to not have been updated accordingly. It is unused anyway, just remove it. Type: improvement Change-Id: I195e556a6695e3250cc03070ffd9262349f2c77b Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-02-20fib: fib path realloc during midchain stackNeale Ranns1-9/+13
Type: fix Change-Id: I0677f46dfa22c8abab7f311230a09ef1cd8ac335 Signed-off-by: Neale Ranns <nranns@cisco.com> (cherry picked from commit 02d5a67d39cbb8f1865227afdc79533578067b8d)
2020-02-07fib: fix non-NULL terminated vectors in cli outputBenoît Ganne1-1/+1
Type: fix Change-Id: Idbb3f29b13a5c84a8585c4299e51fdfc35f7e1ad Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-01-27ipip: Multi-point interfaceNeale Ranns1-1/+2
Type: feature plus fixes for gre Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I0eca5f94b8b8ea0fcfb058162cafea4491708db6
2020-01-09fib: leverage well-optimized clib_memcpyZhiyong Yang1-1/+1
Type: fix Change-Id: I684910837ca4d9c8a07262459158bbb0423a33af Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-12-17ip: Protocol Independent IP NeighborsNeale Ranns1-2/+2
Type: feature - ip-neighbour: generic neighbour handling; APIs, DBs, event handling, aging - arp: ARP protocol implementation - ip6-nd; IPv6 neighbor discovery implementation; separate ND, MLD, RA - ip6-link; manage link-local addresses - l2-arp-term; events separated from IP neighbours, since they are not the same. vnet retains just enough education to perform ND/ARP packet construction. arp and ip6-nd to be moved to plugins soon. Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-17fib: Glean on NBMA interface points to dropNeale Ranns1-77/+71
Type: fix Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Iaae7a9e120bbf8168c581b06d3ac0e124b32e0e7
2019-10-09fib: P2P interfaces do not need specific multicast adjacenciesNeale Ranns1-3/+18
they can use the 'auto' adj for all traffic Type: fix Change-Id: Id2b9557683252a94badc8f9dfab5f7b2ae26f1ee Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-09-25fib: fix some typos in fib/mtrieLijian.Zhang1-1/+1
Type: fix Change-Id: I1af0e4a9bc23a3b6b6d3a74df093801ab6cae1f8 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
2019-07-24fib: Support the POP of a Psuedo Wire Control WordNeale Ranns1-0/+13
Type: feature Change-Id: Ib24547a7c4c73ceb5383d1ca8f14ec40e6a90f01 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns1-38/+100
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-19FIB: recursion casues path reallocNeale Ranns1-1/+12
Change-Id: Ie9c2954eee90ca1a1fc1aa8280f93b2340b544c1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-22ADJ: more thorough link up checkNeale Ranns1-5/+5
Change-Id: I04dbfb914706b25fcc3bd6ee0d19cfdc810234ae Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-20FIB: encode the label stack in the FIB path during table dumpNeale Ranns1-4/+23
Change-Id: I28e8a99b980ad343a4209e673201791b91ceab4e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-07FIB recusrion loop checks traverse midchain adjacenciesNeale Ranns1-2/+14
if a tunnel's destination address is reachable through the tunnel (see example config belwo) then search for and detect a recursion loop and don't stack the adjacency. Otherwise this results in a nasty surprise. DBGvpp# loop cre DBGvpp# set int state loop0 up DBGvpp# set int ip addr loop0 10.0.0.1/24 DBGvpp# create gre tunnel src 10.0.0.1 dst 1.1.1.1 DBGvpp# set int state gre0 up DBGvpp# set int unnum gre0 use loop0 DBGvpp# ip route 1.1.1.1/32 via gre0 DBGvpp# sh ip fib 1.1.1.1 ipv4-VRF:0, fib_index:0, flow hash:[src dst sport dport proto ] locks:[src:plugin-hi:2, src:default-route:1, ] 1.1.1.1/32 fib:0 index:11 locks:4 <<< this is entry #11 src:CLI refs:1 entry-flags:attached, src-flags:added,contributing,active, path-list:[14] locks:2 flags:shared,looped, uPRF-list:12 len:1 itfs:[2, ] path:[14] pl-index:14 ip4 weight=1 pref=0 attached-nexthop: oper-flags:recursive-loop,resolved, cfg-flags:attached, 1.1.1.1 gre0 (p2p) [@0]: ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800 stacked-on entry:11: <<<< and the midchain forwards via entry #11 [@2]: dpo-drop ip4 src:recursive-resolution refs:1 src-flags:added, cover:-1 forwarding: unicast-ip4-chain [@0]: dpo-load-balance: [proto:ip4 index:13 buckets:1 uRPF:12 to:[0:0]] [0] [@6]: ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800 stacked-on entry:11: [@2]: dpo-drop ip4 DBGvpp# sh adj 1 [@1] ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800 stacked-on entry:11: [@2]: dpo-drop ip4 flags:midchain-ip-stack midchain-looped <<<<< this is a loop counts:[0:0] locks:4 delegates: children: {path:14} Change-Id: I39b82bd1ea439be4611c88b130d40289fa0c1b59 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-23c11 safe string handling supportDave Barach1-3/+3
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-16FIB: use vlib-log for debuggingNeale Ranns1-30/+35
Change-Id: I9052202b8cbcf656e61d635253d515f0f3a8d145 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-16Sticky Load-balanceNeale Ranns1-6/+11
keep the number of buckets in the load-balanced fixed. If a path goes dwon fill its buckets with those from the next available up path. Change-Id: I15603ccb899fa9b77556b898c99136379cf32eae Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-08Adding Multipath support for exclusive DPO based fib path entries via rpathVijayabhaskar Katamreddy1-2/+11
Change-Id: I3c84daf046dbad972b36e48fa2548bbe20c7b338 Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-09-25FIB: recusrive paths must lock the table to prevent its deletionNeale Ranns1-0/+6
Change-Id: I958bf057be751dc7b3a0d93080021b3addc405b7 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-09-20UDP-Encap: name counters for the stats segmentNeale Ranns1-1/+1
change the ADD api so that is returns the 'ID' that can be used by the client to read the stats from the stats segment and to delete the object. Previously a similar value used required to be chosen by the client, now VPP allocates one (like it does e.g. for interfaces) Change-Id: I563cf6092276eb990c52d5457c86e72546bcf69e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-30FIB: return entry prefix by const reference to avoid the copyNeale Ranns1-4/+1
Change-Id: I09b8406168df4b6b28df3ede24ee839681be0195 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-10FIB path dump: fix next-hop-table ID for recursive routesNeale Ranns1-0/+2
Change-Id: I57b4ebca29c0b185770373e8878f89a9bd13b742 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-25GBPv6: NAT66 actions for GBPNeale Ranns1-1/+1
Change-Id: I379150a88f2d53d6281be41e8bad6fc4f4e88a71 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-17IP mcast: allow unicast address as a next-hopNeale Ranns1-2/+2
Change-Id: I5e679f2601e37688f2768620479dc2efb7d19ca3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-13Common form of fib-path reproting in dumpsNeale Ranns1-1/+9
Change-Id: I8f6fdbbeef2ac7e9fe5d87490ae5cba6e9a0b294 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-09MPLS Unifom modeNeale Ranns1-11/+9
- support both pipe and uniform modes for all MPLS LSP - all API programming for output-labels requires that the mode (and associated data) is specificed - API changes in MPLS, BIER and IP are involved - new DPO [sub] types for MPLS labels to handle the two modes. Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-016RD: Rewritten 6RD RFC5969 support.Ole Troan1-0/+1
Change-Id: Ic30fbcb2630f39e45345d7215babf5d7ed4b33a0 Signed-off-by: Ole Troan <ot@cisco.com>
2018-01-09DVR: run L3 output featuresNeale Ranns1-38/+68
- rename l2_bridged to is_dvr. Including on the ip.api this was new in the 18.01 release so no compatability issues. - steal the free space in vnet_buffer_opaque_t for use with flags. - run the ipX-output feature arc from the DVR DPO Change-Id: I040e5976d1dbe076fcdda3a40a7804f56337ce3f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-21fib: make deag entries urpf extemptFlorin Coras1-0/+5
Change-Id: Ie8f6bb4fcd3e4fa269e86a77d2f21c87f372b783 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-12-15fib: fix show fib path-list and pathFlorin Coras1-2/+2
Change-Id: I465282e513b6a0482e96dd02fc7e0e4ed3e3731a Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-12-09BIER in non-MPLS netowrksNeale Ranns1-115/+66
as decsribed in section 2.2 ihttps://tools.ietf.org/html/draft-ietf-bier-mpls-encapsulation-10 with BIFT encoding from: https://tools.ietf.org/html/draft-wijnandsxu-bier-non-mpls-bift-encoding-00 changes: 1 - introduce the new BIFT lookup table. BIER tables that have an associated MPLS label are added to the MPLS-FIB. Those that don't are added to the BIER table 2 - BIER routes that have no associated output MPLS label will add a BIFT label. 3 - The BIER FMask has a path-list as a member to resolve via any possible path. Change-Id: I1fd4d9dbd074f0e855c16e9329b81460ebe1efce Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-26FIB: store the node type not the function pointer.Neale Ranns1-2/+0
Saves memory at no appreciable performance cost. before: DBGvpp# sh fib mem FIB memory Name Size in-use /allocated totals Entry 80 7 / 150 560/12000 after: DBGvpp# sh fib mem FIB memory Name Size in-use /allocated totals Entry 72 7 / 7 504/504 Change-Id: Ic5d3920ceb57b54260dc9af2078c26484335fef1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-14Ip6 dump not showing fib table names (VPP-1063)Neale Ranns1-4/+3
Change-Id: Idc7e7c35f17d514589d1264f1d1be664192ee586 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-11-11MPLS disposition actions at the tail of unicast LSPsNeale Ranns1-1/+12
Change-Id: I8c42e26152f2ed1246f91b789887bfc923418bdf Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-09BIERNeale Ranns1-15/+370
- see draft-ietf-bier-mpls-encapsulation-10 - midpoint, head and tail functions - supported payload protocols; IPv4 and IPv6 only. Change-Id: I59d7363bb6fdfdce8e4016a68a9c8f5a5e5791cb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-07UDP Encapsulation.Neale Ranns1-1/+72
A UDP-encap object that particiapates in the FIB graph and contributes DPO to teh output chain. It thereofre resembles a tunnel but without the interface. FIB paths (and henace routes) can then be created to egress through the UDP-encap. Said routes can have MPLS labels, hence this also allows MPLSoUPD. Encap is uni-directional. For decap, one still registers with the UDP port dispatcher. Change-Id: I23bd345523b20789a1de1b02022ea1148ca50797 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-25L3 proxy FIB source for container networkingAndrew Yourtchenko1-7/+8
Change-Id: I4164c4c19c8dbfd73e6ddf94a12056325cc093b9 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-10-14Source Lookup progammable via APINeale Ranns1-2/+8
Change-Id: I5d5d4f22b6369d504455a644f73076d772fbcfb4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-05Distributed Virtual Router SupportNeale Ranns1-22/+42
A distributed virtual router works by attmpeting to switch a packet, but on failing to find a local consumer (i.e. the packet is destined to a locally attached host) then the packet is sent unmodified 'upstream' to where the rest of the 'distributed' router is present. When L3 switching a packet this means the L2 header must not be modifed. This patch adds a 'l2-bridge' object to the L3 FIB which re-injects packets from the L3 path back into the L2 path - use with extreme caution. Change-Id: I069724eb45956647d7980cbe40a80a788ee6ee82 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-04Dump of deag/lookup routes has is_drop=1 (VPP-995)Neale Ranns1-0/+2
Change-Id: I58772a83e22885a9ea8a7a981d2bcb4b31a050d2 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-21PPPoE usses a midchain adjacency stack on an interface-tx DPONeale Ranns1-7/+7
1) introduce an interface-tx DPO. This is a simple wrapper around a sw_if_index. enhance DPO stacking functions to allow per-instance next-nodes and hence allow children to stack onto the interface per-instance tx node and not on 'interface-output'. 2) update PPPoE code to use ta midchain stack on a interface-tx DPO of the encap-interface. This remove the need for pppoe_encap node (which is replaced by the adj-midchain-tx) and interface-output node is no longer used (see above). Since PPPoE encap node is no longer needed, the PPPoE seesion does not need to be retrieved in the data-path, hence the cahce misses are removed. Change-Id: Id8b40f53daa14889a9c51d802e14fed7fba4399a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-08L2 over MPLSNeale Ranns1-44/+35
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-01FIB path weight incorrect in dump (VPP-922)Neale Ranns1-2/+3
Change-Id: I655f41878ca3595681d0255782b0faba01c9824b Signed-off-by: Neale Ranns <nranns@cisco.com>