Age | Commit message (Collapse) | Author | Files | Lines |
|
This patches fixes an issue that could cause
fib locks to underflow: if an API user deletes
a fib and quickly recreates it, the fib may not
have been actually deleted. As a result, the
lock would not be incremented on the create call
leading to the fib potentially disappearing
afterwards - or to the lock to underflow when
the fib is deleted again.
In order to keep the existing API semantics,
we use the locks with API and CLI source as flags.
This means we need to use a different counter
for the interface-related locks.
This also prevents an issue where an interface being
bound to a vrf via API and released via CLI could
mess up the lock counter.
Finally, this will help with cleaning up the
interface-related locks on interface deletion
in a later patch.
Type: fix
Change-Id: I93030a7660646d6dd179ddf27fe4e708aa11b90e
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
If the type is IPv4, makes sure the padding bytes are set to 0 as this
is used by ip46_address_is_ip4() to detect the type.
Type: fix
Change-Id: I6a81fa05a6b227086853901bf3dcdc66e6d04d2c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: I29346c849a5e1ff3c2ea399671f9f50d075e9f18
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Pools fib_urpf_list_pool and fib_entry_pool can grow while ip6_urpf_loose_check/fib_entry_get_flags_for_source are being executed. That may result as a crash in mt environment.
Type: fix
Change-Id: I44ca2cb70255e7aaf2e1f7a7d2eecd25cbdd0aaa
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
|
|
Exported entries are tracked only when the prefix found in the export
FIB is really attached, exporter tracker is not set if the export
entry is not valid for export, ex. for special FIB entries - default
route, zeronet, mcast and broadcast prefixes.
When imported entries need to be purged, such unset exporter tracker is
being removed by non-initialized index with absent delegate entries,
causing corresponding assert and crash.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: Ib24a2e7853a03a960577872480213e1e8097da5a
|
|
Set tableID = ~0 for auto selection unused ID
https://jira.fd.io/browse/VPP-1993
Type: improvement
Change-Id: I4eec2cc1d18fc025196cb6ac4c9a4b374388eb56
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Type: fix
Signed-off-by: jxm <jiangxiaoming@outlook.com>
Change-Id: I5a6a1ce9f232d4ed0fd4707cd5aa9b46cc8a2a5a
|
|
Type: fix
Change-Id: I9d3344374738f8cf883cffb4715c76b50bb4bfce
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
|
|
than 16-8-8-8
Type: feature
the memory trade-off is:
for 8-8-8-8 tries
DBGvpp# sh ip fib mtrie mem
ipv4-VRF:0 mtrie:8068 hash:3499
totals: mtrie:8068 hash:3499 all:11567
for 16-8-8
DBGvpp# sh ip fib mtrie mem
ipv4-VRF:0 mtrie:333056 hash:3499
totals: mtrie:333056 hash:3499 all:336555
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I5271a4322d786de6e47613cff9bd432762dbed2a
|
|
Type: feature
The difference being the MTRIE type they contain.
THE FIB continues to use the 16-8-8 version.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I5a54d4e6e6cc639f18a3fb65ef2925507a7ef1de
|
|
Type: improvement
there's a time-space trade-off between the 16-8-8 and 8-8-8-8 stride.
FIB continues to use the 16-8-8. Other features are now free to make the
choice.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I6691a163486ce62e75e629f6ef0c990f253df8e5
|
|
Type: improvement
the existing mtrie functions use the existing 16_8_8 mtrie. Rename them
to make that explicit. Then we can add the 8_8_8_8 types and functions
alongside.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: If5ce7a282d5d3742dc65bcd0523220235d9c510d
|
|
Type: refactor
as opposed to wrtiing out the mtrie steps one by one each time.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I1248861350f9189f9a67ac6e68940813af279e03
|
|
correctly.
Type: fix
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I4bc2eb394a8f9d01c5a12de2ce963c22209d5439
|
|
mfib interface flags are parsed before the interface name. For some
specific names, this creates a bug when adding routes.
ex: ip route add 10.0.2.0/24 via FortyGigabitEthernetd8/0/0
The 'F' at the beginnig of the interface name is parsed as the
"Forward" flag. Because of that, the interface name parsed is
"ortyGigabitEthernetd8/0/0" which results in a parsing error.
Type: fix
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: Ib76c2f86416455841f910f7b466b467001072b70
|
|
Type: fix
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
Change-Id: Ib4957bfc03b0dfc90fd28689d5b32cc3d82e7b74
|
|
The path pool can expand during in fib_path_attached_next_hop_get_adj()
when calling adj_nbr_add_or_lock(). If dpo points to a path->fp_dpo, its
reference becomes stale.
Use a temporary copy instead.
Type: fix
Change-Id: Ie966cb5f3f7b416425964dca12f1f586bfc2010c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
When adding a route via a udp encap instance, FIB_ENTRY_FLAG_IMPORT
should not be set. In particular, fib_route_attached_cross_table should
always return false for such paths.
Modified test_udp_encap to leverage the bug that needed to be fixed.
Type: fix
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: Iaa9489e96d1cff09751f92c62caf7999d924fd7f
|
|
Possibility to register a port via CLI or API to decap incoming UDP
packets:
- For CLI, a user needs to specify the inner protocol (only MPLS
supported for now)
- For API, the protocol is specified by index
Added unittests
Type: feature
Change-Id: Ifedd86d8db2e355b7618472554fd67d77a13a4aa
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
|
|
- Generate copyright year and version
instead of using hard-coded data
Type: refactor
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I6058f5025323b3aa483f5df4a2c4371e27b5914e
|
|
Type: improvement
Change-Id: Ie8ebbbcf5e93337036998d6ba8dac393b20ebc72
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
an client can dump the existing sources, examine their
priorities, then define thier own source.
Usefull if a client wants to distingusih between say, static,
ospf, bgp, etc routes it has added over the API.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I5158b4fa1ebe87381ff8707bb173217f56ea274a
|
|
Type: feature
Support setting the MTU for a peer on an interface. The minimum value of
the path and interface MTU is used at forwarding time.
the path MTU is specified for a given peer, by address and table-ID.
In the forwarding plane the MTU is enfored either:
1 - if the peer is attached, then the MTU is set on the peer's
adjacency
2 - if the peer is not attached, it is remote, then a DPO is added to
the peer's FIB entry to perform the necessary fragmentation.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
|
|
If the multi-worker default VPP configuration is triggered by
setting VPP_WORKER_CONFIG="workers 2", some of the tests fail
for various reasons.
It's a substantial number, so this change marks all of the
testsets that have this issue, such that they can be addressed
later independently.
Type: test
Change-Id: I4f77196499edef3300afe7eabef9cbff91f794d3
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
MPLS hash includes the IP hash at the bottom of the stack. Default this
to the IP default and use the value passed in to the compute function.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I3f8cb0f7c4fe98ea903a752c2b5fd3d7e26d449a
|
|
Type: improvement
1) stack the interpose on any path-extensions (e.g. labels) from the
next best source
2) allow more than 1 source to contribute a DPO for a given prefix
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Idc2fbb36cfbd2387081765d8af0f1fbe61612160
|
|
Type: fix
When building with musl, the type `uint` is not available unless you
include <sys/types.h>.
Signed-off-by: Nathan Moos <nmoos@cisco.com>
Change-Id: I0003b0c373d9fd532b4135c43d78f36d6cd7afa4
|
|
Type: docs
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3dfde4520a48c945ca9707accabbe1735c1a8799
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: I64527e9f5259e9984dc1e90023b367ee0fd8deeb
|
|
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I0529eb51b5a6bc2a5f1a49ee9d3320908ad1dba9
|
|
Type: refactor
Change-Id: I077110e1a422722e20aa546a6f3224c06ab0cde5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Ic4ef53f49102d7b5061f1b6d3a1d0c8427b9d1f7
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Idf17c3c02fb77fcadf69a9164abd4da35289aaed
|
|
Type: feature
Use the FIB to provide SAS (in so far as it is today)
- Use the glean adjacency as the record of the connected prefixes
= there's a glean per-{interface, protocol, connected-prefix}
- Keep the glean up to date with whatever the recieve host prefix is
(since it can change)
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: I0f3dd1edb1f3fc965af1c7c586709028eb9cdeac
|
|
Type: improvement
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: I487e698555545fce85d02d55deaaf7bb0007e388
|
|
Type: fix
also cleanup any tracking at delete
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Id1037920c88c63e2029384af931064c00ed497aa
|
|
FIB_PATH_TYPE_LAST seems to not have been updated accordingly. It is
unused anyway, just remove it.
Type: improvement
Change-Id: I195e556a6695e3250cc03070ffd9262349f2c77b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
|
|
best source
Type: improvement
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Iaa91cbc7eba94f4ffbdc249ecdb49770bd2ae916
|
|
Type: fix
This is not an API change, it's the same values, just a different named
type.
also use VppEnum values in tests
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3a18b529514f3cc9467ae4e8ac3e88d067fc776b
|
|
Type: improvement
reduce the compile time by moving the bihash includes out of ip[46].h
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I6b9216e10aff1013071f9238b3e1ebbdd205bd80
|
|
Main heap can be hugepage backed so it is more efficient to use
main heap instead of allocating special heap just for mtrie....
Type: improvement
Change-Id: I210912ab8567c043205ddfc10fdcfde9a0fa7757
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
adding routes should be MP safe. When new prefixes with differrent
prefix lengths are added, adjust the sorted list in an MP safe way.
Change-Id: Ib73a3c84d01eb86d17f8e79ea2bd2505dd9afb3d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Some debugging declarations were wrapped in an 'ifdef CLIB_DEBUG'.
This seems to always evaluate true because clib.h defines CLIB_DEBUG
to 0 if its not defined.
The result is that if a route table is added and a route is added to
it and then the table is deleted, VPP exits because the debug function
fib_table_assert_empty() gets called whether VPP was started using a
debug build or a release build.
Change the ifdef to 'if CLIB_DEBUG > 0'.
Change-Id: I357dc2c299e81b95244f2f7efaadb8e0de27627a
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
when the interpose is on an adj-fib and the cover is removed the adj
source will not install. this lead to no path list being found for the
interpose source and a crash. pick a drop path list in this case.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ied217da043926c913657080f5ffb151201225d23
|
|
Identified and removed executable bit from source files in the tree.
find . -perm 755 -name *.[ch] -exec chmod a-x {} \;
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I00710d59fcc46ce5be5233109af4c8077daff74b
|
|
Type: docs
Change-Id: I9b5e5137eb4c1e89f6e8d7a278cd11a0fd496471
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
- move the IP4 code to plugin
- add ip6 support
- add suport for uRPF on TX
- add tests
Change-Id: I074c2debc486d3e79c12fad4b8dbd72c41e841a0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I73d27520726543d6375caad76a841339f68c3533
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|