summaryrefslogtreecommitdiffstats
path: root/src/vnet/fib
AgeCommit message (Collapse)AuthorFilesLines
2021-10-25bier: Disposition paths don't set the next-hopNeale Ranns1-14/+9
Type: fix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I3c4152219e5307ac0fe773e16d597f0e4b9a7d4c
2021-10-22fib: Don't back walk from a path-list when a child fist attaches.Neale Ranns1-11/+7
Type: fix If the walk is triggered when the child is added, then that child is visited in the walk. However, since it is just attahcing to the path-list it may not, or indeed cannot, have all the context it needs to successfully handle the walk. In the case of MPLS tunnel, it does not have the path extensions ready, and cannot since the path extensions need to resolve on the path-list. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I027af8cf2f522d2f6e37931bea60c767f0cb667d
2021-10-20ip6: fix IPv6 address calculation error using "ip route add" CLIJieqiang Wang2-0/+58
Using VPP CLI "ip route add" to add static IPv6 entries outputs wrong results. Fix this error by correctly calculating IPv6 addresses with different increased ranges and grouping ip4/ip6 prefix calculation functionality into two functions. Type: fix Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com> Reviewed-by: Lijian Zhang <lijian.zhang@arm.com> Reviewed-by: Tianyu Li <tianyu.li@arm.com> Change-Id: If954876301ca2095f9331799a086f75db936f246
2021-10-11ip: fix fib and mfib locksNathan Skrzypczak1-2/+39
This patches fixes an issue that could cause fib locks to underflow: if an API user deletes a fib and quickly recreates it, the fib may not have been actually deleted. As a result, the lock would not be incremented on the create call leading to the fib potentially disappearing afterwards - or to the lock to underflow when the fib is deleted again. In order to keep the existing API semantics, we use the locks with API and CLI source as flags. This means we need to use a different counter for the interface-related locks. This also prevents an issue where an interface being bound to a vrf via API and released via CLI could mess up the lock counter. Finally, this will help with cleaning up the interface-related locks on interface deletion in a later patch. Type: fix Change-Id: I93030a7660646d6dd179ddf27fe4e708aa11b90e Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com> Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2021-10-04fib: fix unitialized padding in fib_api_next_hop_decodeBenoît Ganne1-4/+2
If the type is IPv4, makes sure the padding bytes are set to 0 as this is used by ip46_address_is_ip4() to detect the type. Type: fix Change-Id: I6a81fa05a6b227086853901bf3dcdc66e6d04d2c Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-09-30fib: doc nitfixesNathan Skrzypczak6-7/+7
Type: improvement Change-Id: I29346c849a5e1ff3c2ea399671f9f50d075e9f18 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-09-29fib: add barrier lock for fib_urpf_list_pool and fib_entry_poolStanislav Zaikin2-0/+22
Pools fib_urpf_list_pool and fib_entry_pool can grow while ip6_urpf_loose_check/fib_entry_get_flags_for_source are being executed. That may result as a crash in mt environment. Type: fix Change-Id: I44ca2cb70255e7aaf2e1f7a7d2eecd25cbdd0aaa Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
2021-09-27fib: fix crash on exporter tracker removeVladislav Grishenko1-4/+3
Exported entries are tracked only when the prefix found in the export FIB is really attached, exporter tracker is not set if the export entry is not valid for export, ex. for special FIB entries - default route, zeronet, mcast and broadcast prefixes. When imported entries need to be purged, such unset exporter tracker is being removed by non-initialized index with absent delegate entries, causing corresponding assert and crash. Type: fix Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru> Change-Id: Ib24a2e7853a03a960577872480213e1e8097da5a
2021-09-22ip: add ip_table_allocate to apiAloys Augustin1-1/+2
Set tableID = ~0 for auto selection unused ID https://jira.fd.io/browse/VPP-1993 Type: improvement Change-Id: I4eec2cc1d18fc025196cb6ac4c9a4b374388eb56 Signed-off-by: Artem Glazychev <artem.glazychev@xored.com> Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2021-08-25fib: fix source address get error for p2p ifjxm1-0/+24
Type: fix Signed-off-by: jxm <jiangxiaoming@outlook.com> Change-Id: I5a6a1ce9f232d4ed0fd4707cd5aa9b46cc8a2a5a
2021-08-20ip: check if interface has link-local addressStanislav Zaikin1-1/+6
Type: fix Change-Id: I9d3344374738f8cf883cffb4715c76b50bb4bfce Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
2021-08-11fib: Compiile time option to use 8-8-8-8 stride tries for FIB ratherNeale Ranns1-0/+121
than 16-8-8-8 Type: feature the memory trade-off is: for 8-8-8-8 tries DBGvpp# sh ip fib mtrie mem ipv4-VRF:0 mtrie:8068 hash:3499 totals: mtrie:8068 hash:3499 all:11567 for 16-8-8 DBGvpp# sh ip fib mtrie mem ipv4-VRF:0 mtrie:333056 hash:3499 totals: mtrie:333056 hash:3499 all:336555 Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I5271a4322d786de6e47613cff9bd432762dbed2a
2021-08-11fib: A 16-8-8 and a 8-8-8-8 versions of an ip4_fib_tNeale Ranns8-386/+907
Type: feature The difference being the MTRIE type they contain. THE FIB continues to use the 16-8-8 version. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I5a54d4e6e6cc639f18a3fb65ef2925507a7ef1de
2021-08-11ip: [re]introduce the 8-8-8-8 stride MTRIENeale Ranns1-14/+14
Type: improvement there's a time-space trade-off between the 16-8-8 and 8-8-8-8 stride. FIB continues to use the 16-8-8. Other features are now free to make the choice. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I6691a163486ce62e75e629f6ef0c990f253df8e5
2021-08-11ip: Rename the ip4 mtrie function to be 16_8_8 specificNeale Ranns2-44/+44
Type: improvement the existing mtrie functions use the existing 16_8_8 mtrie. Rename them to make that explicit. Then we can add the 8_8_8_8 types and functions alongside. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: If5ce7a282d5d3742dc65bcd0523220235d9c510d
2021-08-10ip: Use the IP4 lookup functionsNeale Ranns1-1/+43
Type: refactor as opposed to wrtiing out the mtrie steps one by one each time. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I1248861350f9189f9a67ac6e68940813af279e03
2021-07-13fib: Set the GLEAN flag on attached export routes so that the SAS worksNeale Ranns4-38/+63
correctly. Type: fix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I4bc2eb394a8f9d01c5a12de2ce963c22209d5439
2021-06-17fib: changing parsing order to avoid corner caseArthur de Kerhor1-3/+3
mfib interface flags are parsed before the interface name. For some specific names, this creates a bug when adding routes. ex: ip route add 10.0.2.0/24 via FortyGigabitEthernetd8/0/0 The 'F' at the beginnig of the interface name is parsed as the "Forward" flag. Because of that, the interface name parsed is "ortyGigabitEthernetd8/0/0" which results in a parsing error. Type: fix Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com> Change-Id: Ib76c2f86416455841f910f7b466b467001072b70
2021-06-16fib: copy the path extentions when creating fib src rr entryStanislav Zaikin1-0/+11
Type: fix Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com> Change-Id: Ib4957bfc03b0dfc90fd28689d5b32cc3d82e7b74
2021-06-08fib: make sure dpo is valid even when path pool expandsBenoît Ganne1-8/+22
The path pool can expand during in fib_path_attached_next_hop_get_adj() when calling adj_nbr_add_or_lock(). If dpo points to a path->fp_dpo, its reference becomes stale. Use a temporary copy instead. Type: fix Change-Id: Ie966cb5f3f7b416425964dca12f1f586bfc2010c Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-06-03fib: fix flags updates when adding routes with a udp encap pathArthur de Kerhor1-1/+1
When adding a route via a udp encap instance, FIB_ENTRY_FLAG_IMPORT should not be set. In particular, fib_route_attached_cross_table should always return false for such paths. Modified test_udp_encap to leverage the bug that needed to be fixed. Type: fix Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com> Change-Id: Iaa9489e96d1cff09751f92c62caf7999d924fd7f
2021-05-29udp: add udp decapsulationArthur de Kerhor1-1/+3
Possibility to register a port via CLI or API to decap incoming UDP packets: - For CLI, a user needs to specify the inner protocol (only MPLS supported for now) - For API, the protocol is specified by index Added unittests Type: feature Change-Id: Ifedd86d8db2e355b7618472554fd67d77a13a4aa Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
2021-05-13tests: move test source to vpp/testDave Wallace2-458/+0
- Generate copyright year and version instead of using hard-coded data Type: refactor Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I6058f5025323b3aa483f5df4a2c4371e27b5914e
2021-04-14misc: clang-12 supportDamjan Marion1-6/+2
Type: improvement Change-Id: Ie8ebbbcf5e93337036998d6ba8dac393b20ebc72 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-03-16fib: Allow the creation of new source on the APINeale Ranns6-20/+201
Type: feature an client can dump the existing sources, examine their priorities, then define thier own source. Usefull if a client wants to distingusih between say, static, ospf, bgp, etc routes it has added over the API. Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I5158b4fa1ebe87381ff8707bb173217f56ea274a
2021-02-15ip: Path MTUNeale Ranns3-2/+25
Type: feature Support setting the MTU for a peer on an interface. The minimum value of the path and interface MTU is used at forwarding time. the path MTU is specified for a given peer, by address and table-ID. In the forwarding plane the MTU is enfored either: 1 - if the peer is attached, then the MTU is set on the peer's adjacency 2 - if the peer is not attached, it is remote, then a DPO is added to the peer's FIB entry to perform the necessary fragmentation. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
2021-02-11tests: tag the tests that do not work with multi-worker configurationAndrew Yourtchenko1-0/+2
If the multi-worker default VPP configuration is triggered by setting VPP_WORKER_CONFIG="workers 2", some of the tests fail for various reasons. It's a substantial number, so this change marks all of the testsets that have this issue, such that they can be addressed later independently. Type: test Change-Id: I4f77196499edef3300afe7eabef9cbff91f794d3 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2021-02-04mpls: MPLS Hash fixesNeale Ranns1-2/+3
Type: fix MPLS hash includes the IP hash at the bottom of the stack. Default this to the IP default and use the value passed in to the compute function. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I3f8cb0f7c4fe98ea903a752c2b5fd3d7e26d449a
2021-02-01fib: Changes to interpose sourceNeale Ranns5-19/+78
Type: improvement 1) stack the interpose on any path-extensions (e.g. labels) from the next best source 2) allow more than 1 source to contribute a DPO for a given prefix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Idc2fbb36cfbd2387081765d8af0f1fbe61612160
2021-01-21fib: fix includes for muslNathan Moos1-1/+1
Type: fix When building with musl, the type `uint` is not available unless you include <sys/types.h>. Signed-off-by: Nathan Moos <nmoos@cisco.com> Change-Id: I0003b0c373d9fd532b4135c43d78f36d6cd7afa4
2021-01-14docs: Update FIB documentationNeale Ranns1-6/+17
Type: docs Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I3dfde4520a48c945ca9707accabbe1735c1a8799
2020-12-18fib: Remove unused FIB path-list DB variableNeale Ranns2-7/+0
Type: refactor Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: I64527e9f5259e9984dc1e90023b367ee0fd8deeb
2020-12-16tests: move fib tests to src/vnet/fib/testDave Wallace2-0/+456
- Refactor make test code to be co-located with the vpp feature source code Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I0529eb51b5a6bc2a5f1a49ee9d3320908ad1dba9
2020-12-14misc: refactor clib_bitmap_foreach macroDamjan Marion1-3/+3
Type: refactor Change-Id: I077110e1a422722e20aa546a6f3224c06ab0cde5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-12-14misc: move to new pool_foreach macrosDamjan Marion8-30/+30
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-12-11fib: remove unsued path flagNeale Ranns1-5/+0
Type: refactor Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Ic4ef53f49102d7b5061f1b6d3a1d0c8427b9d1f7
2020-12-11fib: Remove unused BIER variablesNeale Ranns2-22/+10
Type: refactor Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Idf17c3c02fb77fcadf69a9164abd4da35289aaed
2020-12-08fib: Source Address SelectionNeale Ranns10-34/+329
Type: feature Use the FIB to provide SAS (in so far as it is today) - Use the glean adjacency as the record of the connected prefixes = there's a glean per-{interface, protocol, connected-prefix} - Keep the glean up to date with whatever the recieve host prefix is (since it can change) Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: I0f3dd1edb1f3fc965af1c7c586709028eb9cdeac
2020-11-26fib: Expressive type for walk return code. Honour code.Neale Ranns6-19/+17
Type: improvement Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: I487e698555545fce85d02d55deaaf7bb0007e388
2020-11-26fib: Only track cover if activatedNeale Ranns1-1/+15
Type: fix also cleanup any tracking at delete Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Id1037920c88c63e2029384af931064c00ed497aa
2020-11-16fib: remove misleading FIB_PATH_TYPE_LASTBenoît Ganne1-14/+0
FIB_PATH_TYPE_LAST seems to not have been updated accordingly. It is unused anyway, just remove it. Type: improvement Change-Id: I195e556a6695e3250cc03070ffd9262349f2c77b Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-10-28misc: Break the big IP header files to improve compile timeNeale Ranns1-1/+0
Type: refactor Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
2020-10-26fib: API to extract any resolving interface rather than the one from theNeale Ranns2-0/+22
best source Type: improvement Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Iaa91cbc7eba94f4ffbdc249ecdb49770bd2ae916
2020-10-21ip: convert u32 entry_flags to vl_api_mfib_entry_flags_t on mroute APINeale Ranns1-2/+2
Type: fix This is not an API change, it's the same values, just a different named type. also use VppEnum values in tests Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I3a18b529514f3cc9467ae4e8ac3e88d067fc776b
2020-10-19ip: Move the IP6 fib into ip6_[m]fib.cNeale Ranns2-14/+120
Type: improvement reduce the compile time by moving the bihash includes out of ip[46].h Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I6b9216e10aff1013071f9238b3e1ebbdd205bd80
2020-09-21ip: use main heap for mtrieDamjan Marion1-18/+3
Main heap can be hugepage backed so it is more efficient to use main heap instead of allocating special heap just for mtrie.... Type: improvement Change-Id: I210912ab8567c043205ddfc10fdcfde9a0fa7757 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-02fib: IPv6 lookup data structure MP safe when prefixes changeNeale Ranns1-14/+31
Type: fix adding routes should be MP safe. When new prefixes with differrent prefix lengths are added, adjust the sorted list in an MP safe way. Change-Id: Ib73a3c84d01eb86d17f8e79ea2bd2505dd9afb3d Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-07-06fib: fix debug preprocessor directivesMatthew Smith4-4/+4
Type: fix Some debugging declarations were wrapped in an 'ifdef CLIB_DEBUG'. This seems to always evaluate true because clib.h defines CLIB_DEBUG to 0 if its not defined. The result is that if a route table is added and a route is added to it and then the table is deleted, VPP exits because the debug function fib_table_assert_empty() gets called whether VPP was started using a debug build or a release build. Change the ifdef to 'if CLIB_DEBUG > 0'. Change-Id: I357dc2c299e81b95244f2f7efaadb8e0de27627a Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-05-26fib: Fix interpose source reactivateNeale Ranns1-0/+14
Type: fix when the interpose is on an adj-fib and the cover is removed the adj source will not install. this lead to no path list being found for the interpose source and a crash. pick a drop path list in this case. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ied217da043926c913657080f5ffb151201225d23
2020-05-15misc: removed executable bits from source filesRay Kinsella1-0/+0
Identified and removed executable bit from source files in the tree. find . -perm 755 -name *.[ch] -exec chmod a-x {} \; Type: improvement Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: I00710d59fcc46ce5be5233109af4c8077daff74b