Age | Commit message (Collapse) | Author | Files | Lines |
|
FIB_PATH_TYPE_LAST seems to not have been updated accordingly. It is
unused anyway, just remove it.
Type: improvement
Change-Id: I195e556a6695e3250cc03070ffd9262349f2c77b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
|
|
best source
Type: improvement
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Iaa91cbc7eba94f4ffbdc249ecdb49770bd2ae916
|
|
Type: fix
This is not an API change, it's the same values, just a different named
type.
also use VppEnum values in tests
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3a18b529514f3cc9467ae4e8ac3e88d067fc776b
|
|
Type: improvement
reduce the compile time by moving the bihash includes out of ip[46].h
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I6b9216e10aff1013071f9238b3e1ebbdd205bd80
|
|
Main heap can be hugepage backed so it is more efficient to use
main heap instead of allocating special heap just for mtrie....
Type: improvement
Change-Id: I210912ab8567c043205ddfc10fdcfde9a0fa7757
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
adding routes should be MP safe. When new prefixes with differrent
prefix lengths are added, adjust the sorted list in an MP safe way.
Change-Id: Ib73a3c84d01eb86d17f8e79ea2bd2505dd9afb3d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Some debugging declarations were wrapped in an 'ifdef CLIB_DEBUG'.
This seems to always evaluate true because clib.h defines CLIB_DEBUG
to 0 if its not defined.
The result is that if a route table is added and a route is added to
it and then the table is deleted, VPP exits because the debug function
fib_table_assert_empty() gets called whether VPP was started using a
debug build or a release build.
Change the ifdef to 'if CLIB_DEBUG > 0'.
Change-Id: I357dc2c299e81b95244f2f7efaadb8e0de27627a
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
when the interpose is on an adj-fib and the cover is removed the adj
source will not install. this lead to no path list being found for the
interpose source and a crash. pick a drop path list in this case.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ied217da043926c913657080f5ffb151201225d23
|
|
Identified and removed executable bit from source files in the tree.
find . -perm 755 -name *.[ch] -exec chmod a-x {} \;
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I00710d59fcc46ce5be5233109af4c8077daff74b
|
|
Type: docs
Change-Id: I9b5e5137eb4c1e89f6e8d7a278cd11a0fd496471
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
- move the IP4 code to plugin
- add ip6 support
- add suport for uRPF on TX
- add tests
Change-Id: I074c2debc486d3e79c12fad4b8dbd72c41e841a0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I73d27520726543d6375caad76a841339f68c3533
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: improvement
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ib7a9e457cb2462e6ce9e5e2af53d1f997f4ae6cf
|
|
This path flag FIB_API_PATH_TYPE_INTERFACE_RX is not copied to the client bin_api.
Type: fix
Change-Id:
Signed-off-by: IJsbrand Wijnands <ice@cisco.com>
Change-Id: I612044d2f564c852f83fceb63ce750a6330e1365
|
|
Type: fix
Change-Id: Ia61d6fbf6e80977f83f1f6672e5e83b52ddeb0e5
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I0677f46dfa22c8abab7f311230a09ef1cd8ac335
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 02d5a67d39cbb8f1865227afdc79533578067b8d)
|
|
Add an ALWAYS_ASSERT (...) macro, to (a) shut up coverity, and (b)
check the indicated condition in production images.
As in:
p = hash_get(...);
ALWAYS_ASSERT(p) /* was ASSERT(p) */
elt = pool_elt_at_index(pool, p[0]);
This may not be the best way to handle a specific case, but failure to
check return values at all followed by e.g. a pointer dereference
isn't ok.
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ia97c641cefcfb7ea7d77ea5a55ed4afea0345acb
|
|
Type: fix
Change-Id: I6011f5d6eae79019d3c16a260a9bedf0a76d2151
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
The mheap allocator has been turned off for several releases. This
commit removes the cmake config parameter, parallel support for
dlmalloc and mheap, and the mheap allocator itself.
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I104f88a1f06e47e90e5f7fb3e11cd1ca66467903
|
|
Type: fix
Change-Id: Idbb3f29b13a5c84a8585c4299e51fdfc35f7e1ad
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
plus fixes for gre
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I0eca5f94b8b8ea0fcfb058162cafea4491708db6
|
|
Type: fix
The crash occured trying to retreive a NULL path list to walk the path
extensions. A walk shoul not be required, because there should be no
extensins, since all paths are removed. The problem is that when the
paths were added, they were not sorted, hence neither were the
extensions and when they were updated, duplicate extensions were added,
and hence a path removal did not remove them all.
Fix is to make sure paths are sorted.
Change-Id: I069d937de8e7bc8aae3d92f588db4daff727d863
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 257749c40946a9269140d322e374d74c3b6eefb8)
|
|
Type: refactor
currently vnet_classify.h is included in ip.h where it's not required.
Change-Id: Id55682637601655aa2edda681536a979c8e323bd
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I684910837ca4d9c8a07262459158bbb0423a33af
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
|
|
The 16 bits reference counter limited the number of interfaces
per FIB table to 65K from a given source. Some use cases, for example
GTP-U tunnels require much more interfaces than that.
This change increases the size of the reference counter to 32 bits.
Type: fix
Signed-off-by: Miklos Tirpak <miklos.tirpak@gmail.com>
Change-Id: I944a98513018840f904f2808c2a1e963b37886cc
|
|
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Iaae7a9e120bbf8168c581b06d3ac0e124b32e0e7
|
|
Type: feature
Change-Id: I28f7a658be3f3beec9ea32635b60d1d3a10d9b06
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
the fib_source_t enum alone no longer defines the priority and
behaviour, instead each source must be allocated these attributes.
This allows the creation of other sources by the plugins (and
soon over the API).
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I890ee820fbc16079ee417ea1fbc163192806e853
|
|
if the adj source is not active then there is no existing cover
during a cover update
Type: fix
Ticket: VPP-1803
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ie912f1c99345de4fb012bdcd97b443098d4a7351
|
|
Type: fix
harmless this time since it only affects the debug statement, but
it still crashes an ASAN image.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ie02e7fe3014b98b9f8c83447f59017a380ab3948
|
|
Type: feature
from the API doc, a table replace is:
"
The use-case is that, for some unspecified reason, the control plane
has a very different set of entries it wants in the table than VPP
currently has. The CP would thus like to 'replace' VPP's current table
only by specifying what the new set of entries shall be, i.e. it is not
going to delete anything that already eixts.
the CP delcartes the start of this procedure with this begin_replace
API Call, and when it has populated all the entries it wants, it calls
the below end_replace API. From this point on it is of coursce free
to add and delete entries as usual.
The underlying mechanism by which VPP implements this replace is
purposefully left unspecified.
"
In the FIB, the algorithm is implemented using mark and sweep.
Algorithm goes:
1) replace_begin: this marks all the entries in that table as 'stale'
2) download all the entries that should be in this table
- this clears the stale flag on those entries
3) signal the table converged: ip_table_replace_end
- this removes all entries that are still stale
this procedure can be used when an agent first connects to VPP,
as an alternative to dump and diff state reconciliation.
Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
all other uses of the fib_entry_get_preifx in the code base don't pass
the prefix into recursive functions.
Change-Id: Ic1c56acd406a733b215ee2fd98b6bed58b490a4f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: Ib7ac53d1b59b641ccd3b1d733107d7f1ba174314
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
they can use the 'auto' adj for all traffic
Type: fix
Change-Id: Id2b9557683252a94badc8f9dfab5f7b2ae26f1ee
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I7ed9726d8c5ca26715a84b004a18fd7f93142486
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I1af0e4a9bc23a3b6b6d3a74df093801ab6cae1f8
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
Type: refactor
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: I8674ff5f6f6336b256b7df8187afbb36ddef71fb
|
|
Type: fix
Ticket: 1729
The flags that are permanently set on a path-list should form part of
its key in the path-list DB. Otherwise, if shared, they will not behave
as expected.
Change-Id: I0aa7c7c5d270c97b08014e4a47ddbdcee2358706
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Ticket: 1728
Change-Id: I679c2b8c5b0f751c9476db3669ab3f6c26dcdd28
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Add the FIB_SOURCE_INVALID fib source type. This allows to spot
uninitialized fib source more easily (0 no longer means special) and we
can use it as placeholder when no source is present.
Use it to fix FIB_ENTRY_DBG() which was accessing the 1st source, even
when no sources were present.
Type: fix
Fixes: 710071bf0e
Change-Id: I980b6a6a07616d4a8d6f2db166a1dd335721c74d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: Ib24547a7c4c73ceb5383d1ca8f14ec40e6a90f01
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Instead of all clients directly RR sourcing the entry they are tracking,
use a deidcated 'tracker' object. This tracker object is a entry
delegate and a child of the entry. The clients are then children of the
tracker.
The benefit of this aproach is that each time a new client tracks the
entry it doesn't RR source it. When an entry is sourced all its children
are updated. Thus, new clients tracking an entry is O(n^2). With the
tracker as indirection, the entry is sourced only once.
Type: feature
Change-Id: I5b80bdda6c02057152e5f721e580e786cd840a3b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Fixes: 097fa66b
Change-Id: I690e31433b64f11399c08b4a0318762916c2c2f0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
When removing duplicates in urpf_itfs vector we search for the 1st next
different entry in the vector, but the loop test is in the wrong order:
(urpf->furpf_itfs[i] == urpf->furpf_itfs[j]
&& j < vec_len(urpf->furpf_itfs))
We must check for overflow before checking equality.
Type: fix
Fixes: 3ee44040c66cbe47ff292ac7fb0badccbe2afe6d
Change-Id: I63729aff12057d5abce6c24ec24339cd9cd79494
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
whole route
Type: fix
Fixes: 097fa66b
Change-Id: I017ab5797670eb278c27c6e306cd8cadaacddf9d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Fixes: 59fa121f
Change-Id: I9eb4fe1612734e54932228527c37bf33b705dbdb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Usually the adj cover refinement check which ensures that for any
adj sourced prefix its cover is connected, is satified by the presence
of the interface source. The interface source has a high priority
hence during the adj refinement check get_flags() which uses the best
source, usually returns the flags for the interface source. However,
in the presence of higher priority sources that interpose get_flags does
not return connected and the check fails.
With this change add a specific check for the interface source if the
best is not connected.
Type: feature
Change-Id: Iabc3e29fe7c447fc3ef313e40b00d48fab09fba4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|