Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Change-Id: I8c248d9e224bd069b641a174da57d448371470af
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: refactor
Change-Id: I5235bf3e9aff58af6ba2c14e8c6529c4fc9ec86c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
As similar 535364e90459566b603661c3dbe360c72f59ad71 is
merged, printing possibly deleted interfaces by index
only in all the rest cases.
Type: improvement
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: I4fa58b382c0279ff893523ba0188fdb9b09e10af
|
|
Fix crash while adding intf-rx ip4 and ip6 routes via api due
invalid exporting of interface rx routes as attached.
Also, add missed route path via rx-ip6 cli support.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: I15711c8c0787398dd7e3baa4787019bb1f317666
|
|
Add vlib_worker_wait_one_loop prior to invoking dpo_reset
upon uninstalling a fib entry to avoid contention with DP.
Type: fix
Change-Id: If2a6c4cb9b5629dd61e506ab9f9c3e6aef121b45
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
This patch prevents the sw interfaces format
function to fail when the interface was deleted.
It also prints the swifindex alongside the 'DELETED'
keyword.
Printing deleted swifindex should not happen, but it is still
helpful to have these safeguards for troubleshooting in the case
invariants get corrupted (e.g. fib entry refcounts, ...)
Type: improvement
Change-Id: I66711049db2eebe0ad17e37c3a260ac81d1e5134
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Properly set type
path->fp_type = FIB_PATH_TYPE_SPECIAL
for paths with (path->fp_cfg_flags & FIB_PATH_CFG_FLAG_DROP)
Type: fix
Change-Id: Id61dbcda781d872b878e6a6410c05b840795ed46
Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com>
|
|
Type: improvement
If an interface address is added, the glean adjacency for it's covering
prefix is updated with that address. In the case of multiple addresses
within the same prefix being added, the most recently added one will end
up being used as the sender protocol address for ARP requests.
Similar behavior occurs when an interface address is deleted. The glean
adjacency is updated to some appropriate entry under it's covering
prefix. If there were multiple interface addresses configured, we may
update the address on the adjacency even though the address currently in
use is not the one being deleted.
Add a new value PROVIDES_GLEAN to fib_entry_src_flag_t. The flag
identifies whether a source interface entry is being used as the address
for the glean adjacency for the covering prefix.
Update logic so that the glean is only updated on adding an interface
address if there is not already a sibling entry in use which has the
flag set. Also, only update the glean on deleting an interface address
if the address being deleted has the flag set.
Also update unit test which validates expected behavior in the case
where multiple addresses within a prefix are configured on an interface.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I7d918b8dd703735b20ec76e0a60af6d7e571b766
|
|
The VPP is crashing when specify a very big prefix length, like
ip route add 1.1.1.1/55 via 2.2.2.2
Type: fix
Signed-off-by: Gavril Florian <gflorian@3nets.io>
Change-Id: Ic491c0b24e07be897ff35ae1e835280f04ab3ea5
|
|
Change-Id: I4c3144794dd0bd7de6150929e53f6d305c496b17
Type: fix
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I7b0c2c2dec5e867970599b8f2f2da17f2ff0b17c
|
|
Type: fix
Change-Id: I879594fcade4e081190e8dfb1dbcfc53e8431edf
Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com>
|
|
This feature enables the use of the classifier and ip-in-out-acl nodes
to redirect matching sessions via arbitrary fib paths instead of relying
on additional VRFs.
Type: feature
Change-Id: Ia59d35481c2555aec96c806b62bf29671abb295a
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Fix vpp crash when create vxlan/vxlan-gpe/geneve/gtpu tunnel
with 0.0.0.0 dst ip in debug build. The ASSERT should be move
out of fib_prefix_from_ip46_addr, which may be called when
create vxlan/vxlan-gpe/geneve/gtpu tunnel with 0.0.0.0 dst ip.
How to reproduce:
1. build debug vpp and run vpp
2. create vxlan t src 192.168.0.2 dst 0.0.0.0 vni 1 instance 1
create vxlan-gpe tunnel local 192.168.0.2 remote 0.0.0.0 vni 1
create geneve tunnel local 192.168.0.2 remote 0.0.0.0 vni 1
create gtpu tunnel src 192.168.0.2 dst 0.0.0.0 teid 1
Type: fix
Change-Id: I19972f6af588f4ff7fd17de1b16b9301e43d596f
Signed-off-by: Huawei LI <lihuawei_zzu@163.com>
|
|
Type: improvement
Change-Id: Ie035bebf64226691cffc84484e4bf7310287d1b7
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
This adds the ability to specify we want an IPv4 route via an IPv6 adj
and vice-versa.
Type: improvement
Change-Id: I5f7f1ab89fc60244d31c26155bbd9b0db690257c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
DPO in the new copy was not locked ...
Type: fix
Fixes: 0bfe5d8
Change-Id: I39f1368de459af91c4bb857d98a4b531bd5692a6
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Add an assert to express the constraint to coverity without
incurring the overhead in release builds.
Type: fix
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I2c22f8b2565c645d95c9c0be37381060e151420f
|
|
Use of _vec_len() to set vector length breaks address sanitizer.
Users should use vec_set_len(), vec_inc_len(), vec_dec_len () instead.
Type: improvement
Change-Id: I441ae948771eb21c23a61f3ff9163bdad74a2cb8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: I3625eacf9e04542ca8778df5d46075a8654642c7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
mpls fib DB size was 2^20 instead of intended 2^21.
Therefore large mpls labels caused DB to overflow and write
to other tables or some random objects. Or crash with ASAN.
Sometimes.
Type: fix
Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru>
Change-Id: I6db65680037a266fe47e8213464a0c16de63c06c
|
|
Type: fix
Signed-off-by: Rajith P R <rajith@rtbrick.com>
Change-Id: I8c9c85081c27bfe7ee71b5b620a2a761e027789c
|
|
Type: test
The FIB UT fails in debug mode because there is no string associated woth its fib_node_type_t.
Change the tests to register their own type, which will give it a name.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I36e546718faa7241c088494cbae10939aca51d5a
|
|
ip6 and mpls fib_table->ft_locks memory leaked when the table is
deleted.
name tag is leaked for mpls table parsing.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ife68c0ddc3a6f9437a149b308310f042799c2116
|
|
fib_table->ft_locks
name string for parsing the ip table add|del name <tag> command
path list for ip4_specials in mfib
mfib->fib_entry_by_dst_address[0..32]
mfib entry path_ext, msrc->mfes_exts
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ia1e0cac577a73608ee1e4b1664b60a66322e81ce
|
|
Type: fix
Presently a local label associated with an attached or connected prefix will link to the glean. This is a problem since it will never use the adj-fibs that are installed for that attached prefix. Instead link the local label to a lookup in the table in which the attached link is bound.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Iad49fb6168b9ba47216a9a52bd262363b49c3c43
|
|
Type: fix
IPv6 link-local FIB entries are never needed for attached export.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I08aad78e754d89ad54d07a211fb7a0d7fbc7a0fe
|
|
fib_sas6_get is called with NULL dst explicitly so add a NULL check to
avoid a NULL dereference.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I8ebcba98832f374991f5442c1b83a4b6e64771d0
|
|
Type: fix
When registering a new FIB node type, no name was required on the API, and so no name was printed.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8a99cf29c194637a550061b0a5e9782ffe8b31dd
|
|
Type: fix
re-evaluate the import/export state of a prefix when the interface it is attached to rebinds to a different table.
Only attached routes have import/export requirements, so we can back walk from the glean adjacency when the interface rebinds tables.
There are two cases to consider.
1. the rebind may change the prefix from/to import
2. the import VRF may change
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I25b6af43b3b2d8f701dfbe7a08710dc56b3f5778
|
|
Type: fix
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I3c4152219e5307ac0fe773e16d597f0e4b9a7d4c
|
|
Type: fix
If the walk is triggered when the child is added, then that child is visited in the walk. However, since it is just attahcing to the path-list it may not, or indeed cannot, have all the context it needs to successfully handle the walk.
In the case of MPLS tunnel, it does not have the path extensions ready, and cannot since the path extensions need to resolve on the path-list.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I027af8cf2f522d2f6e37931bea60c767f0cb667d
|
|
Using VPP CLI "ip route add" to add static IPv6 entries outputs wrong
results. Fix this error by correctly calculating IPv6 addresses with
different increased ranges and grouping ip4/ip6 prefix calculation
functionality into two functions.
Type: fix
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
Reviewed-by: Lijian Zhang <lijian.zhang@arm.com>
Reviewed-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: If954876301ca2095f9331799a086f75db936f246
|
|
This patches fixes an issue that could cause
fib locks to underflow: if an API user deletes
a fib and quickly recreates it, the fib may not
have been actually deleted. As a result, the
lock would not be incremented on the create call
leading to the fib potentially disappearing
afterwards - or to the lock to underflow when
the fib is deleted again.
In order to keep the existing API semantics,
we use the locks with API and CLI source as flags.
This means we need to use a different counter
for the interface-related locks.
This also prevents an issue where an interface being
bound to a vrf via API and released via CLI could
mess up the lock counter.
Finally, this will help with cleaning up the
interface-related locks on interface deletion
in a later patch.
Type: fix
Change-Id: I93030a7660646d6dd179ddf27fe4e708aa11b90e
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
If the type is IPv4, makes sure the padding bytes are set to 0 as this
is used by ip46_address_is_ip4() to detect the type.
Type: fix
Change-Id: I6a81fa05a6b227086853901bf3dcdc66e6d04d2c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: I29346c849a5e1ff3c2ea399671f9f50d075e9f18
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Pools fib_urpf_list_pool and fib_entry_pool can grow while ip6_urpf_loose_check/fib_entry_get_flags_for_source are being executed. That may result as a crash in mt environment.
Type: fix
Change-Id: I44ca2cb70255e7aaf2e1f7a7d2eecd25cbdd0aaa
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
|
|
Exported entries are tracked only when the prefix found in the export
FIB is really attached, exporter tracker is not set if the export
entry is not valid for export, ex. for special FIB entries - default
route, zeronet, mcast and broadcast prefixes.
When imported entries need to be purged, such unset exporter tracker is
being removed by non-initialized index with absent delegate entries,
causing corresponding assert and crash.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: Ib24a2e7853a03a960577872480213e1e8097da5a
|
|
Set tableID = ~0 for auto selection unused ID
https://jira.fd.io/browse/VPP-1993
Type: improvement
Change-Id: I4eec2cc1d18fc025196cb6ac4c9a4b374388eb56
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Type: fix
Signed-off-by: jxm <jiangxiaoming@outlook.com>
Change-Id: I5a6a1ce9f232d4ed0fd4707cd5aa9b46cc8a2a5a
|
|
Type: fix
Change-Id: I9d3344374738f8cf883cffb4715c76b50bb4bfce
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
|
|
than 16-8-8-8
Type: feature
the memory trade-off is:
for 8-8-8-8 tries
DBGvpp# sh ip fib mtrie mem
ipv4-VRF:0 mtrie:8068 hash:3499
totals: mtrie:8068 hash:3499 all:11567
for 16-8-8
DBGvpp# sh ip fib mtrie mem
ipv4-VRF:0 mtrie:333056 hash:3499
totals: mtrie:333056 hash:3499 all:336555
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I5271a4322d786de6e47613cff9bd432762dbed2a
|
|
Type: feature
The difference being the MTRIE type they contain.
THE FIB continues to use the 16-8-8 version.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I5a54d4e6e6cc639f18a3fb65ef2925507a7ef1de
|
|
Type: improvement
there's a time-space trade-off between the 16-8-8 and 8-8-8-8 stride.
FIB continues to use the 16-8-8. Other features are now free to make the
choice.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I6691a163486ce62e75e629f6ef0c990f253df8e5
|
|
Type: improvement
the existing mtrie functions use the existing 16_8_8 mtrie. Rename them
to make that explicit. Then we can add the 8_8_8_8 types and functions
alongside.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: If5ce7a282d5d3742dc65bcd0523220235d9c510d
|
|
Type: refactor
as opposed to wrtiing out the mtrie steps one by one each time.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I1248861350f9189f9a67ac6e68940813af279e03
|
|
correctly.
Type: fix
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I4bc2eb394a8f9d01c5a12de2ce963c22209d5439
|
|
mfib interface flags are parsed before the interface name. For some
specific names, this creates a bug when adding routes.
ex: ip route add 10.0.2.0/24 via FortyGigabitEthernetd8/0/0
The 'F' at the beginnig of the interface name is parsed as the
"Forward" flag. Because of that, the interface name parsed is
"ortyGigabitEthernetd8/0/0" which results in a parsing error.
Type: fix
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: Ib76c2f86416455841f910f7b466b467001072b70
|
|
Type: fix
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
Change-Id: Ib4957bfc03b0dfc90fd28689d5b32cc3d82e7b74
|
|
The path pool can expand during in fib_path_attached_next_hop_get_adj()
when calling adj_nbr_add_or_lock(). If dpo points to a path->fp_dpo, its
reference becomes stale.
Use a temporary copy instead.
Type: fix
Change-Id: Ie966cb5f3f7b416425964dca12f1f586bfc2010c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
When adding a route via a udp encap instance, FIB_ENTRY_FLAG_IMPORT
should not be set. In particular, fib_route_attached_cross_table should
always return false for such paths.
Modified test_udp_encap to leverage the bug that needed to be fixed.
Type: fix
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: Iaa9489e96d1cff09751f92c62caf7999d924fd7f
|