Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I13dc5eab8835c4f3b95906816d42dccfeee8b092
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
also some moving of l2 headers to reduce dependencies
Change-Id: I7a700a411a91451ef13fd65f9c90de2432b793bb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I63c36644c9d93f2c3ec6606ca0205b407499de4e
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
This patch separates setting of hardware interfaec and software
interface MTU. Software MTU is L2 payload MTU (i.e. not including L2
header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set.
Currently only IP4, IP6 are enabled in adjacency / rewrite code.
Documentation in src/vnet/MTU.md
Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
interface)"
This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa.
Reverting as this patch is causing following crash:
0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails
Aborted
Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I62a2a6524b72115a4239fbd7dc9ac8fdc35e20ed
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change GRE tunnel to use the interface type where the same encap
node is used as output node for all GRE tunnels, instead of having
dedicated output and tx node for each tunnel. This allows for more
efficient tunnel creation and deletion at scale tested at 1000's
of GRE tunnels.
Add support for ERSPAN encap as another tunnel type, in addition
to the existing L3 and TEB types. The GRE ERSPAN encap supported
is type 2 thus GRE encap need to include sequence number and GRE-
ERSPAN tunnel can be created with user secified ERSPAN session ID.
The GRE tunnel lookup hash key is updated to inclue tunnel type
and session ID, in addition to SIP/DIP and FIB index.
Thus, GRE-ERSPAN tunnel can be created, with the appropriate
session ID, to be used as output interface for SPAN config to
send mirrored packets.
Change interface naming so that all GRE tunnels, irrespective of
tunnel type, uses "greN" where N is the instance number. Removed
interface reuse on tunnel creation and deletion to enable unfied
tunnel interface name.
Add support of user specified instance on GRE tunnel creation.
Thus, N in the "greN" interface name can optionally be specified
by user via CLI/API.
Optimize GRE tunnel encap DPO stacking to bypass load-balance DPO
node since packet output on GRE tunnel always belong to the same
flow after 5-tupple hash.
Change-Id: Ifa83915744a1a88045c998604777cc3583f4da52
Signed-off-by: John Lo <loj@cisco.com>
|
|
Improve "show xxx tunnel" output functions format_xxx_tunnel() for
GRE, VXLAN, VXLAN-GPE, GENEVE and GTPU tunnels to make their output
more consistent and provide better information.
Improved the output of "show int addr" to make its info more
consistent with tunnels and provide fib-index info.
Change-Id: Icd4b5b85a5bec417f8ee19afea336c770ad3b4c5
Signed-off-by: John Lo <loj@cisco.com>
|
|
The code path in src/vnet/gre/interface.c uses fib_id as a
component to generate hash key for GRE tunnel. This should be
fib_index as the GRE rx/decap data path will be using fib_index
to generate the hash key to lookup the GRE tunnel.
Change-Id: Ia7f0892d84f9dac79223a6e016775892b61eb5fb
Signed-off-by: John Lo <loj@cisco.com>
(cherry picked from commit 72247c803250894834d15952a6fddcd8f4a39a9c)
|
|
- GRE tunnels with the same src,dst addresses are not the same tunnel
- Two data-plane improvements:
- the cached key was never updated and so useless
- no need to dereference the tunnel's HW interface to get the sw_if_index
Change-Id: I2f2ea6e08c759a810b753cec22c497e921a2ca01
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I95f98b91faf74178c05f30da9eb3d6125193b7ef
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Saves memory at no appreciable performance cost.
before:
DBGvpp# sh fib mem
FIB memory
Name Size in-use /allocated totals
Entry 80 7 / 150 560/12000
after:
DBGvpp# sh fib mem
FIB memory
Name Size in-use /allocated totals
Entry 72 7 / 7 504/504
Change-Id: Ic5d3920ceb57b54260dc9af2078c26484335fef1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
tests). The DPO was incorrectly initialised with FIB_PROTO_MAX
Change-Id: I962df9e162e4dfb6837a5ce79ea795d5ff2d7315
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Refactors the GRE node to work with both IPv4 and IPv6 transports.
Note that this changes the binary configuration API to support both
address families; each address uses the same memory for either
address type and a flag to indicate which is in use.
The CLI and VAT syntax remains unchanged; the code detects whether
an IPv4 or an IPv6 address was given.
Configuration examples:
IPv4 CLI: create gre tunnel src 192.168.1.1 dst 192.168.1.2
IPv6 CLI: create gre tunnel src 2620:124:9000::1 dst 2620:124:9000::2
IPv4 VAT: gre_add_del_tunnel src 192.168.1.1 dst 192.168.1.2
IPv6 VAT: gre_add_del_tunnel src 2620:124:9000::1 dst 2620:124:9000::2
Change-Id: Ica8ee775dc101047fb8cd41617ddc8fafc2741b0
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
|
|
In the CLI parsing, below is a common pattern:
/* Get a line of input. */
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
if (unformat (line_input, "x"))
x = 1;
:
else
return clib_error_return (0, "unknown input `%U'",
format_unformat_error, line_input);
}
unformat_free (line_input);
The 'else' returns if an unknown string is encountered. There a memory
leak because the 'unformat_free(line_input)' is not called. There is a
large number of instances of this pattern.
Replaced the previous pattern with:
/* Get a line of input. */
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
if (unformat (line_input, "x"))
x = 1;
:
else
{
error = clib_error_return (0, "unknown input `%U'",
format_unformat_error, line_input);
goto done:
}
}
/* ...Remaining code... */
done:
unformat_free (line_input);
return error;
}
In multiple files, 'unformat_free (line_input);' was never called, so
there was a memory leak whether an invalid string was entered or not.
Also, there were multiple instance where:
error = clib_error_return (0, "unknown input `%U'",
format_unformat_error, line_input);
used 'input' as the last parameter instead of 'line_input'. The result
is that output did not contain the substring in error, instead just an
empty string. Fixed all of those as well.
There are a lot of file, and very mind numbing work, so tried to keep
it to a pattern to avoid mistakes.
Change-Id: I8902f0c32a47dd7fb3bb3471a89818571702f1d2
Signed-off-by: Billy McFall <bmcfall@redhat.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23
Signed-off-by: Damjan Marion <damarion@cisco.com>
|