Age | Commit message (Collapse) | Author | Files | Lines |
|
Prep for supporting multiple callbacks, optional args, etc.
Type: improvement
Change-Id: I96244c098712e8213374678623f12527b0e7f387
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Using the adjacency to modify the interface's feature arc doesn't work, since there are potentially more than one adj per-interface.
Instead have the interface, when it is created, register what the end node of the feature arc is. This end node is then also used as the interface's tx node (i.e. it is used as the adjacency's next-node).
rename adj-midhcain-tx as 'tunnel-output', that's a bit more intuitive.
There's also a fix in config string handling to:
1- prevent false sharing of strings when the end node of the arc is different.
2- call registered listeners when the end node is changed
For IPSec the consequences are that one cannot provide per-adjacency behaviour using different end-nodes - this was previously done for the no-SA and an SA with no protection. These cases are no handled in the esp-encrypt node.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: If3a83d03a3000f28820d9a9cb4101d244803d084
|
|
While looking at a coverity warning it was discovered that it's caused
by return value modified by pd msg handlers. As these are legacy, it's
a good time to remove them and also fix the warning this way.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ic72ab8b2b7a2e55188d1c31cfd18a74b7cf82c43
|
|
Type: fix
The init of fib_index_by_sw_if_index wasn't
setting default value to 0. Which we now
need for setting interfaces unnumbered
Change-Id: Ie5be9b5e5373ef055557a871ad4d1c45fbfc1dee
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
forwarding gre payload
This commit introduces 2 fixes:
1) After GRE decapsulation sw_if_index[VLIB_TX] is set as fib index of GRE tunnel.
But since GRE tunnel can work on v4 endpoints and have v6 payload, we need to reset it.
In case we get IPv6 packet inside IPv4 GRE tunnel (or vice-versa) fib index can be (and usually is) invalid.
2) Check that ip-table and ip6-table are the same when setting interface as an unnumbered one.
Also, fix for the pipe test include setting the right unnumbered interface for the pipes
Type: fix
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
Change-Id: Id13d239cfdd21e0db6b1c9725f01c40d4af4d800
|
|
Type: fix
If a GRE tunnel is created and the peer is not resolved yet and an
IPv6 route is added which points to the tunnel, packets matching the
route will be dropped. When the tunnel peer is resolved, adjacencies
on the tunnel interface should be restacked and packets matching the
route can be encapsulated and sent..
There is a loop that is intended to do this for both IPv4 and IPv6.
The call to walk adjacencies is invoked in a "return" statement though.
So the loop is exited and the function returns before IPv6 adjacencies
are walked.
Remove the return so the loop finishes.
Change-Id: Ia4f695681713020209ea490ae4142857cea49c41
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
- Generate copyright year and version
instead of using hard-coded data
Type: refactor
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I6058f5025323b3aa483f5df4a2c4371e27b5914e
|
|
Type: test
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I5c540b3a2f26689973daec80372c5a935a455a12
|
|
Type: fix
- the CLI was broken when a nh-table-id was present, since it overwrote
the next-hop address
- bouncing interface state stacked the adjacencies on the tunnel's
destination (which is all zeros)
- don't crash in the switch path if the interface has no hw-address
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I1ba9fdc9b2185899b753a2d40f23afa847a3ef4f
|
|
Type: feature
Support setting the MTU for a peer on an interface. The minimum value of
the path and interface MTU is used at forwarding time.
the path MTU is specified for a given peer, by address and table-ID.
In the forwarding plane the MTU is enfored either:
1 - if the peer is attached, then the MTU is set on the peer's
adjacency
2 - if the peer is not attached, it is remote, then a DPO is added to
the peer's FIB entry to perform the necessary fragmentation.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
|
|
Type: fix
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Id7b27edf3712aaa3c277e752b9ca78bb91d184a1
|
|
If the multi-worker default VPP configuration is triggered by
setting VPP_WORKER_CONFIG="workers 2", some of the tests fail
for various reasons.
It's a substantial number, so this change marks all of the
testsets that have this issue, such that they can be addressed
later independently.
Type: test
Change-Id: I4f77196499edef3300afe7eabef9cbff91f794d3
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: feature
The added functionality is to support copying TTL and flow label from
inner to outer. The .api was extened to support expressing this and also
adding a common tunnel endpoint type. i find it best to make API changes
in one patch so there are less versions of the API.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I755c1e3f4c475058792af39c1abeda92129efb76
|
|
Type: refactor
Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I53011e089bfecb08483792029b534b09b9e33a10
Type: improvement
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Change-Id: I2bf6ba325975309183dba1e14e9519c944710752
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: improvement
|
|
Type: improvement
also clean up GRE includes across the code base.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I90928b0da3927b7ca1a23683aa80d4b53bbf63fd
|
|
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I4fa716778712ebfb1b136df98775345372d3dfad
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Iae9fe35cfbce4c675fa25e0800c0f4629a83e012
|
|
Type: improvement
reduce the compile time by moving the bihash includes out of ip[46].h
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I6b9216e10aff1013071f9238b3e1ebbdd205bd80
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I9eff41407b0f172f2b567e6a4ea1c48be8df883a
|
|
Type: style
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I26a19e42076e031ec5399d5ca05cb49fd6fbe1cd
|
|
Type: style
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3703b9a882b7577025f495d500daf08a916891b9
|
|
Type: improvement
Change-Id: Ica75c4e43d6198658a1954640c7ac56ea68bb39a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I6fdc4e952097e92ac3aa53e0be3ef99e0d801b28
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This updates the computation of the outer ip6 header payload_length
field in order to take into account the GRE header length.
Change-Id: Ie9f982521aeaef7279a9e329a33272d6fae0a428
Type: fix
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Type: improvement
Change-Id: I6627e22110be94c8127486ae009761494e734c04
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
The Tunnel Endpoint Informatiob Base (TEIB) is a better
description of what it is (a mapping between tunnel endpoint
address, in the overlay, and next-hop address, in the underlay)
whereas NHRP is one instanc eof a control protocol that might add
such endpoints.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Idcb2ad0b6543d3e5d9f6e96f9d14dafb5ce2aa85
|
|
+ Remove fields not present in the typedef.
+ Sort field descriptions by the order in the typedef.
+ Add descriptions to other messages.
+ Add comment lines with de-abbreviated enum values.
Type: style
Change-Id: I2c41e0204ba5c59a53f1cf7b5837118484a16ad0
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
The previous edit has added a new field to a typedef.
That change is backward-compatible for PAPI users,
but not backward compatible for direct binary API users.
This change adds two edits that should have been there already:
+ Copyright year bump.
+ API version bump.
- PAPI users point of view, so bumping minor version only.
Type: fix
Fixes: e5b94dded0dfd7258d5fd0f4ef897d9ccb48715b
Change-Id: Ib85f457254e38a8e5999a078855848e6a5cfda13
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Type: feature
common funcitons across IP-in-IP and GRE tunnels for encap/decap
functions
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I325b66824878d843af167adfe5a7a96b0ab90566
|
|
Type: feature
plus fixes for gre
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I0eca5f94b8b8ea0fcfb058162cafea4491708db6
|
|
Type: refactor
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I18dcdb7af3e327f6cacdbcb1e52b89f13d6ba6e2
|
|
Type: docs
Signed-off-by: John DeNisco <jdenisco@cisco.com>
Change-Id: I7280e5c5ad10a66c0787a5282291a2ef000bff5f
|
|
vnet/gre/FEATURE.yaml does not conform with the JSON schema definition.
This bug should no longer happen with the patch that ensures
validation is run as part of checkstyle.
Signed-off-by: Ole Troan <ot@cisco.com>
Type: fix
Change-Id: I25bf8d2a442bf7ccdbf693b031a7a383444dfee3
|
|
Type: docs
Change-Id: Icda0c8d2141294d78447177dd4823d1b2228e830
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Change-Id: I170edd62220a63cb19efea3032e173fb87730b1b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
|
|
Type: feature
Change-Id: I0129ad6ace44a50a8a3b26db8e445cd06b2b49e8
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3aad20b35d89fc541fdf185096d71ca12b09a6e2
|
|
please consult the new tunnel proposal at:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0036c216b79afb66b982b1b6a7e81f738f3b61dc
Type: refactor
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Id5c0f420e32e0504cea660fed2013f3ad28088aa
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Change-Id: I9715b0578852a1ed59d78b7a9e28f32fc763ed3c
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Change-Id: I5010cd34123c6498230dedac6ba8dd774a1085f9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I215e1e0208a073db80ec6f87695d734cf40fabe3
Signed-off-by: Jim Thompson <jim@netgate.com>
|
|
this can be used by e.g. tunnels so it doesn't need to be
implemented for each tunnel type.
Change-Id: I0790f89aa49f83421612b35108cce67693285999
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I3b3c8333287bb704ac7b0bbc81b3dbb059e8d2ac
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Change-Id: Ifd34aed8692d5acaa370d4976d974ac573e43705
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I0f6b9f306f2323216ba64b694e8fdfa116e6cc9c
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|