aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/interface.c
AgeCommit message (Collapse)AuthorFilesLines
2019-12-04gre: Multi-point interfacesNeale Ranns1-0/+10
Type: feature Change-Id: I0129ad6ace44a50a8a3b26db8e445cd06b2b49e8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-04gso: remove the interface countMohsin Kazmi1-1/+0
Type: refactor Change-Id: I51405b9d09fb6fb03d08569369fdd4e11c647908 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-10-09interface: callback to manage extra MAC addressesMatthew Smith1-0/+42
Type: feature New callback vnet_hw_interface_add_del_mac_address(). Add or delete secondary MAC addresses on a hardware interface. This will allow packets to be processed which have a destination MAC address other than the primary programmed MAC address without needing to put the device into promiscuous mode. Change-Id: I6beecbcb8932fc1fe45b567f76fa3706feefae2c Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-09-26misc: add vnet classify filter set supportDave Barach1-0/+1
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I79b216d2499df143f53977e5b70382f6f887e0bc
2019-08-27interface: Remove residual dpdk bonding codeSteven Luong1-9/+0
dpdk bonding code was removed in 19.08. However, there are still references to VNET_SW_INTERFACE_FLAG_BOND_SLAVE which was set by the already removed code. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I949a7281e6273f2733dd7532cc4a3bb4f3ce30de
2019-07-31vppinfra: refactor test_and_set spinlocks to use clib_spinlock_tjaszha031-4/+3
Spinlock performance improved when implemented with compare_and_exchange instead of test_and_set. All instances of test_and_set locks were refactored to use clib_spinlock_t when possible. Some locks e.g. ssvm synchronize between processes rather than threads, so they cannot directly use clib_spinlock_t. Type: refactor Change-Id: Ia16b5d4cd49209b2b57b8df6c94615c28b11bb60 Signed-off-by: Jason Zhang <jason.zhang2@arm.com> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com> Reviewed-by: Lijian Zhang <Lijian.Zhang@arm.com>
2019-06-18ipsec: ipsec-tun protectNeale Ranns1-0/+24
please consult the new tunnel proposal at: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-13vnet: remove macro definitionsZhiyong Yang1-3/+0
These two macro definitions should be removed as enum vnet_interface_helper_flags_t has defined them. Change-Id: I31bd0ea75639d2f9a53f396ac3cf42f9fc5fbdbe Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-02-19tap gso: experimental supportAndrew Yourtchenko1-0/+6
This commit adds a "gso" parameter to existing "create tap..." CLI, and a "no-gso" parameter for the compatibility with the future, when/if defaults change. It makes use of the lowest bit of the "tap_flags" field in the API call in order to allow creation of GSO interfaces via API as well. It does the necessary syscalls to enable the GSO and checksum offload support on the kernel side and sets two flags on the interface: virtio-specific virtio_if_t.gso_enabled, and vnet_hw_interface_t.flags & VNET_HW_INTERFACE_FLAG_SUPPORTS_GSO. The first one, if enabled, triggers the marking of the GSO-encapsulated packets on ingress with VNET_BUFFER_F_GSO flag, and setting vnet_buffer2(b)->gso_size to the desired L4 payload size. VNET_HW_INTERFACE_FLAG_SUPPORTS_GSO determines the egress packet processing in interface-output for such packets: When the flag is set, they are sent out almost as usual (just taking care to set the vnet header for virtio). When the flag is not enabled (the case for most interfaces), the egress path performs the re-segmentation such that the L4 payload of the transmitted packets equals gso_size. The operations in the datapath are enabled only when there is at least one GSO-compatible interface in the system - this is done by tracking the count in interface_main.gso_interface_count. This way the impact of conditional checks for the setups that do not use GSO is minimized. "show tap" CLI shows the state of the GSO flag on the interface, and the total count of GSO-enabled interfaces (which is used to enable the GSO-related processing in the packet path). This commit lacks IPv6 extension header traversal support of any kind - the L4 payload is assumed to follow the IPv6 header. Also it performs the offloads only for TCP (TSO - TCP segmentation offload). The UDP fragmentation offload (UFO) is not part of it. For debug purposes it also adds the debug CLI: "set tap gso {<interface> | sw_if_index <sw_idx>} <enable|disable>" Change-Id: Ifd562db89adcc2208094b3d1032cee8c307aaef9 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-02-02Deprecate old mutliarch code, phase 1Damjan Marion1-2/+2
It is causing compilation sloness with gcc-7 so removing it before it was originally planned. So far macros are left in the tree so we can know which nodes to convert to new multiarch code. Change-Id: Idb14622ca61fdce1eba59723b20d98715b7971e6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-08vnet: store hw interface speed in kbps instead of using flagsDamjan Marion1-2/+1
Change-Id: Idd4471a3adf7023e48e85717f00c786b1dde0cca Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-30change mac address functions take const macNeale Ranns1-2/+2
Change-Id: Ia68db22b917e9af1394c00e5a6b3df134bfd1568 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-29interface-flags; fix coverity error found in conversionNeale Ranns1-3/+28
Change-Id: I2eafac4ce810fe53454b729d81161ec80d036db7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-27Enumify interface flagsNeale Ranns1-10/+23
clang will emit a warning when the wrong enum type is passed to a function whose arguments are an enum type. free bug finding... Change-Id: I62215d8ef22c7527a31272e31f5d190e4e762e53 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-23c11 safe string handling supportDave Barach1-2/+2
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-01API / CLI event-log tracingDave Barach1-121/+0
Add an "elog trace [api][cli][barrier]" debug CLI command. Removed the barrier elog test command. Remove unused reliable multicast code. Change-Id: Ib3ecde901b7c49fe92b313d0087cd7e776adcdce Signed-off-by: Dave Barach <dave@barachs.net>
2018-09-25L2 BD: introduce a BD interface on which to send UU packetsNeale Ranns1-3/+4
Change-Id: I21ad6b04c19c8735d057174b1f260a59f2812241 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra1-3/+3
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-09-08L2 BVI/FIB: Update L2 FIB table when BVI's MAC changesNeale Ranns1-2/+6
also some moving of l2 headers to reduce dependencies Change-Id: I7a700a411a91451ef13fd65f9c90de2432b793bb Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-11Multiversioning: Device (tx) function constructorMohsin Kazmi1-0/+21
Change-Id: I39f87ca161c891fb22462a23188982fef7c3243f Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-07-20IP directed broadcastNeale Ranns1-0/+17
with ip direct broadcast enable a packet to the interface's subnet broadcast address with be sent L2 broadcast on the interface. dissabled, it will be dropped. it is disabled by default, which preserves current behaviour Change-Id: If154cb92e64834e97a541b32624354348a0eafb3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-07PipesNeale Ranns1-3/+23
A pipe resembles a unix pipe. Each end of the pipe is a full VPP interface. pipes can be used for e.g. packet recirculation, inter-BD, etc. Change-Id: I185bb9fb43dd233ff45da63ac1b85ae2e1ceca16 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-06-15STATS: Add more hierarchy to counters.Ole Troan1-31/+13
Put error counters under node_index. /err/<node-name>/<error-name> E.g: /err/ip4-lookup/Hash table collisions /err/ip6-rewrite/Buffer allocation error Error names are not globally unique, and this allows for walking all errors for a particular node. Put interface counters under the directory /if. E.g. /if/rx Put system counters under the directory /sys. E.g. /sys/vector_rate Change-Id: I5b794d16698f61bcb2063a8cd77a7c4ae36419b8 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-11MTU: Software interface / Per-protocol MTU supportOle Troan1-19/+82
This patch separates setting of hardware interfaec and software interface MTU. Software MTU is L2 payload MTU (i.e. not including L2 header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set. Currently only IP4, IP6 are enabled in adjacency / rewrite code. Documentation in src/vnet/MTU.md Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-08export counters in a memfd segmentDave Barach1-0/+4
also export per-node error counters directory entries implement object types Change-Id: I8ce8e0a754e1be9de895c44ed9be6533b4ecef0f Signed-off-by: Dave Barach <dave@barachs.net>
2018-06-03Interface Tag: memset field in VOM, clear the tag in VPP on interface deleteNeale Ranns1-0/+1
Change-Id: Id97de732b5952d5d86202e7749c9e81cf8dbed87 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-05-28itf: Fix admin up down for AF_PACKET and vhost-userMohsin Kazmi1-2/+5
Change-Id: I84327197d59c72d0d046dd2cb4071bf74af6fc28 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-05-25ARP proxy dumpsNeale Ranns1-1/+20
Change-Id: I8335ebf266becf2f42bb3f28a17dfed8d9b08f97 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-27TAP memory leaks:Neale Ranns1-1/+4
1 - use bit-map to re-use ID values and thus VLIB nodes 2 - free vrings 3 - free hw_address on HW interface delete (a HW * struct is memset on pool_get) 4 - free temporary node names during TX node setup Change-Id: Id114c8bb9c844fd4ceb02fbbeb4b511ecfeb61ce Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-18Mcast rewrite optimisationsNeale Ranns1-1/+1
hard code the address mask offsets. This are protocol specific and only used on ethernet when used at all. Change-Id: Ib1f6f33682f53254ffbb5a241a1583e65420e0c7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-13Revert "MTU: Setting of MTU on software interface (instead of hardware ↵Damjan Marion1-49/+13
interface)" This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa. Reverting as this patch is causing following crash: 0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails Aborted Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13MTU: Setting of MTU on software interface (instead of hardware interface)Ole Troan1-13/+49
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-19Use x(void) not x() in new interface stats codeNeale Ranns1-2/+2
Change-Id: Iaceaba4dc22341c631c858516b960ce97c4aa564 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-19Interface Unicast, Multicast and Broadcast stats on the APINeale Ranns1-0/+66
Change-Id: I7c75da358aff1bd0216a602a49f2909cef5d920d Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-18Remove unnumbered configuration on interface deleteNeale Ranns1-0/+45
Change-Id: Iae5532c3d53e208831f3b2782242d9e59d367087 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-02-16Allow providers to override glean behaviourNeale Ranns1-1/+3
and update glean address on local interface MAC change Change-Id: I530826d60c7e9db2b0fa2d45754139d82c5ea807 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-15Revert "Allow interface types to override glean adjacency behaivour"Ole Trøan1-3/+1
This reverts commit 8b30e471df4d42214619e1d6c50cc8298426b45f. Change-Id: I99edb236eb0a7f8ba3fba333c3481a710ebcb59c Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-15Allow interface types to override glean adjacency behaivourNeale Ranns1-1/+3
update the glean adj on a local interface MAC change Change-Id: Ia5c5cde424ed0fea3431532cc5abf22b364bbab5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-02-12Improve MTU handlingNeale Ranns1-0/+16
- setting MTU on an interface updates the L3 max bytes too - value cached in the adjacency is also updated - MTU exceeded generates ICMP to sender Change-Id: I343ec71d8e903b529594c4bd0543f04bc7f370b3 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-01-24Improve tunnel interface creation performanceJohn Lo1-21/+29
Modify interface creation to allow creation of tunnel interfaces without dedicated per tunnel output and tx nodes which are not used for most tunnel types. Also changed interface-output node function vnet_per_buffer_interface_output() so it does not rely on hw_if_index as the next node index which is not flexible nor efficient for large scale tunnel interfaces. The improvenemts are done for VXLAN, VXLAN-GPE, GENEVE and GTPU tunnels. GRE tunnel is still using per tunnel output nodes which will be changed in a separate patch with other GRE enhencements. Change-Id: I4123c01c0d2ead814417a867adb8c8a407e4df55 Signed-off-by: John Lo <loj@cisco.com>
2018-01-19Sub-Interface deletion not cleanup hash's properly (VPP-1136)John Lo1-4/+11
On deleting sub-interfaces, functions vnet_delete_sub_interface() and vnet_delete_hw_interface() are not cleaning up sub-interface related hash tables and memory properly. Change-Id: I17c7c4b2078c062c77bfe48889beb677610035ca Signed-off-by: John Lo <loj@cisco.com> (cherry picked from commit 7f5bec647c9dc743c015d461d040e63a77fd0a08)
2017-10-31Fix set interface mac address API to be endian neutralJohn Lo1-4/+5
Store and pass MAC address as 6 byte u8 array instead of u64 to make MAC address handling in set interface MAC endian neutral. The previous API handler only works for little endian. Change-Id: Ie4ec33a840bc5122ab1f17e25977e58f3466253b Signed-off-by: John Lo <loj@cisco.com>
2017-10-19VPP-1024: rewrite buffer trajectory tracerDave Barach1-6/+9
Use a proper u16 * vector to capture node indices, since vpp w/ plugins now exceeds 255 graph nodes Change-Id: Ic48cad676fa3a6116413ddf08c083dd9660783f1 Signed-off-by: Dave Barach <dave@barachs.net>
2017-08-13default update adjacency function deos not return multicast adjacencyNeale Ranns1-6/+40
by not returning a multicast adjacency type when requested, but instead returning a nbr type, the mcast adj was never correctly deleted. hence when reused the adjacency object was not realocated from the pool and when it was freed a second time a crash occured. Change-Id: Ia74ae3e889db0dfba8ec3c6a0cccfef215587ff6 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-01P2P EthernetPavel Kotucek1-0/+4
Change-Id: Idb97e573961b3bc2acdeef77582314590795f8c3 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-07-27Fix interface reuse when running multithreadedDamjan Marion1-4/+12
Node function pointer was not set on all node runtimes causing crash if new interface is different type. Change-Id: I4661fe883befc6cd3fc6dfc14fd44f6fa5faf27c Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-12Deprecate support for flattened output nodesDamjan Marion1-6/+2
Change-Id: Id117e219146d9994340fb38c00233ea67db8929b Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-21Introduce default rx mode for device driversDamjan Marion1-0/+1
If interface is down and queues are not configured then we are not able to change rx-mode. This change introducess default mode which is stored per interface and applied if driver wants. Change-Id: I70149c21c1530eafc148d5e4aa03fbee53dec62f Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-20vlib: make runtime_data handling thread-localIgor Mikhailov (imichail)1-16/+26
Change-Id: Ic2f2dc234199a5f882846880cbacff20fc8d477b Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2017-05-10vnet: introduce error state for sw interfacesDamjan Marion1-0/+7
Interfaces with error state are not allowed to go admin up Change-Id: I09fc09a5b28130aead219dccbc2e0f30ea7414cf Signed-off-by: Damjan Marion <damarion@cisco.com>