summaryrefslogtreecommitdiffstats
path: root/src/vnet/interface.h
AgeCommit message (Collapse)AuthorFilesLines
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra1-3/+3
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-09-08L2 BVI/FIB: Update L2 FIB table when BVI's MAC changesNeale Ranns1-1/+2
also some moving of l2 headers to reduce dependencies Change-Id: I7a700a411a91451ef13fd65f9c90de2432b793bb Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-13Multiarch handling in different constructor macrosDamjan Marion1-0/+14
This significantly reduces need for ... in multiarch code. Simply constructor macros will jost create static unused entry if CLIB_MARCH_VARIANT is defined and that will be optimized out by compiler. Change-Id: I17d1c4ac0c903adcfadaa4a07de1b854c7ab14ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-11Multiversioning: Device (tx) function constructorMohsin Kazmi1-0/+21
Change-Id: I39f87ca161c891fb22462a23188982fef7c3243f Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-07-20IP directed broadcastNeale Ranns1-14/+22
with ip direct broadcast enable a packet to the interface's subnet broadcast address with be sent L2 broadcast on the interface. dissabled, it will be dropped. it is disabled by default, which preserves current behaviour Change-Id: If154cb92e64834e97a541b32624354348a0eafb3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-07PipesNeale Ranns1-0/+1
A pipe resembles a unix pipe. Each end of the pipe is a full VPP interface. pipes can be used for e.g. packet recirculation, inter-BD, etc. Change-Id: I185bb9fb43dd233ff45da63ac1b85ae2e1ceca16 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-06-15STATS: Add more hierarchy to counters.Ole Troan1-0/+20
Put error counters under node_index. /err/<node-name>/<error-name> E.g: /err/ip4-lookup/Hash table collisions /err/ip6-rewrite/Buffer allocation error Error names are not globally unique, and this allows for walking all errors for a particular node. Put interface counters under the directory /if. E.g. /if/rx Put system counters under the directory /sys. E.g. /sys/vector_rate Change-Id: I5b794d16698f61bcb2063a8cd77a7c4ae36419b8 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-11MTU: Software interface / Per-protocol MTU supportOle Troan1-9/+18
This patch separates setting of hardware interfaec and software interface MTU. Software MTU is L2 payload MTU (i.e. not including L2 header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set. Currently only IP4, IP6 are enabled in adjacency / rewrite code. Documentation in src/vnet/MTU.md Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690 Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-11Fix issue with xconnect not working on the main interfaceDamjan Marion1-9/+6
Due to union, l2 sub-interface bits were wrongly set causing sporadic misconfiguration of l2 mode on some interfaces. Change-Id: Id77ee281e3a0030878641a786c22ffe16ce1c759 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-10vnet: device flow offload infraDamjan Marion1-0/+20
Change-Id: Ibea4a96bdec5e368301a03d8b11a0712fa0265e0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-25Adjacency walk more scalableNeale Ranns1-0/+5
When walking all adjacencies for a given {next-hop,interface} instead of walking all the adjacencies on that interface and matching the next-hop (which is O(n) in the number of adjacencies on that link, find all instances of an adjacency with any link-type and wtih that {next-hop,interfacE} pair: this is O(1). Change-Id: Ic80399fc9e93c8df111379c039e592d8cafbab18 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-13Revert "MTU: Setting of MTU on software interface (instead of hardware ↵Damjan Marion1-3/+8
interface)" This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa. Reverting as this patch is causing following crash: 0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails Aborted Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13MTU: Setting of MTU on software interface (instead of hardware interface)Ole Troan1-8/+3
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901 Signed-off-by: Ole Troan <ot@cisco.com>
2018-04-13bond: ping fails between l2 BD [VPP-1238]Steven1-0/+8
In dpdk based bonding, when the bond interface is configured for l2, it automatically sets the bond interface to promiscuous mode and sets rx redirect to ethernet-input. This allows traffic to be bridged to non compute node facing interface when it is received from the compute node interface. For native vpp bonding, we need to do similar things. When the bond interface is configured for l2, we set the slave interfaces to promiscuous mode and set rx redirect to ethernet-input because dpdk does not know anything about the bond interface. Likewise, when a new interface is enslaved, we also need to do the same thing if the bond interface has already been configured for l2. Change-Id: I7e168008e8a4221be74929b2a20e6db0ce8f3110 Signed-off-by: Steven <sluong@cisco.com>
2018-04-09L2: no-flood interface type in the Bridge-DomainNeale Ranns1-1/+5
Change-Id: I50ff0cacf88182f8e0be19840c50f4954de586e2 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-09plugins: unload plugin if early init failsDamjan Marion1-0/+41
Change-Id: I32f68e2ee8f5d32962acdefb0193583f71d342b3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-04Detailed stats collection featureNeale Ranns1-15/+15
Use device-input and interface-output feautre arcs to collect unicast, multicast and broadcast states for RX and TX resp. Since these feature arcs are present only for 'physical' interfaces (i.e. not su-interfaces) counter collection is supported only on parent interface types. Change-Id: I915c235e336b0fc3a3c3de918f95dd674e4e0e4e Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-03-19Use x(void) not x() in new interface stats codeNeale Ranns1-3/+3
Change-Id: Iaceaba4dc22341c631c858516b960ce97c4aa564 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-19Interface Unicast, Multicast and Broadcast stats on the APINeale Ranns1-1/+35
Change-Id: I7c75da358aff1bd0216a602a49f2909cef5d920d Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-09Coordinate known Ethernet speeds with Linux kernel and DPDKLee Roberts1-6/+16
Linux kernel and DPDK recognize the following Ethernet speeds: 10M, 100M, 1G, 2.5G, 5G, 10G, 20G, 25G, 40G, 50G, 56G and 100G. Add consistent Ethernet speeds to VPP. Change-Id: I4cfcf378fb34425c1206db5aa2f6bdcc66e0a6ab Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
2018-02-26vnet: add 25G interface speed flagDamjan Marion1-2/+4
Change-Id: I1d3ede2b043e1fd4abc54f540bb1d3ac9863016e Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-13vnet:remove duplicate interface function macroEyal Bari1-15/+3
Change-Id: I0ee18df69d5fe833c746d0d1e14aac14338a6e42 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-01-24Improve tunnel interface creation performanceJohn Lo1-0/+4
Modify interface creation to allow creation of tunnel interfaces without dedicated per tunnel output and tx nodes which are not used for most tunnel types. Also changed interface-output node function vnet_per_buffer_interface_output() so it does not rely on hw_if_index as the next node index which is not flexible nor efficient for large scale tunnel interfaces. The improvenemts are done for VXLAN, VXLAN-GPE, GENEVE and GTPU tunnels. GRE tunnel is still using per tunnel output nodes which will be changed in a separate patch with other GRE enhencements. Change-Id: I4123c01c0d2ead814417a867adb8c8a407e4df55 Signed-off-by: John Lo <loj@cisco.com>
2017-08-01P2P EthernetPavel Kotucek1-0/+15
Change-Id: Idb97e573961b3bc2acdeef77582314590795f8c3 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-07-18TCP/UDP checksum offload APIDave Barach1-0/+3
Change-Id: I2cb6ce4e29813f6602b14e6e61713fb381fbcef8 Signed-off-by: Dave Barach <dave@barachs.net>
2017-07-13Fix crash with worker threads on 4K VXLAN/BD setup (VPP-907)John Lo1-6/+2
Cleanup mapping of interface output node for the l2-output node when interface is configured to L2 or L3 modes. The mapping is now always done in the main thread as part of API/CLI processing, instead of initiate mapping in the forwarding path which can be in the worker threads. Change-Id: Ia789493e7d9f5c76d68edfaf34db43f3e3f53506 Signed-off-by: John Lo <loj@cisco.com> (cherry picked from commit bea5ebf205e0bec922bf26c6c1a6a9392b4cad67)
2017-07-12Deprecate support for flattened output nodesDamjan Marion1-3/+0
Change-Id: Id117e219146d9994340fb38c00233ea67db8929b Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-21Introduce default rx mode for device driversDamjan Marion1-0/+2
If interface is down and queues are not configured then we are not able to change rx-mode. This change introducess default mode which is stored per interface and applied if driver wants. Change-Id: I70149c21c1530eafc148d5e4aa03fbee53dec62f Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-10vnet: introduce error state for sw interfacesDamjan Marion1-0/+3
Interfaces with error state are not allowed to go admin up Change-Id: I09fc09a5b28130aead219dccbc2e0f30ea7414cf Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-10device: Add callback for set interface rx-modeSteven1-9/+17
- When the interface rx-mode is changed via CLI, the corresponding device may want to know about it and to reset the driver. This patch is to add the callback. - In the function vnet_hw_interface_set_rx_mode, it appears it is missing a line hw->rx_mode_by_queue[queue_id] = mode because the function is checking if the new mode is the same as hw->rx_mode_by_queue which is initialized to POLLING. So if the function is called to change the mode to interrupt, it just returns without doing anything. This is the check that I am talking about in the same function. if (hw->rx_mode_by_queue[queue_id] == mode) return 0; Change-Id: Iaca2651c43e0ae3fda6fd8dc128e247b0851cc65 Signed-off-by: Steven <sluong@cisco.com>
2017-05-02Add interface rx mode commands, unify rx mode and placement CLIDamjan Marion1-0/+15
Change-Id: Ib506c3e9d66170f29e3266ad6dc4d32b829befba Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-10Common device-input interrupt infraDamjan Marion1-0/+3
Change-Id: I23b588eb56a3f5690158449a1f9bc8053cd3d251 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-06Use thread local storage for thread indexDamjan Marion1-1/+1
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-20vnet: add device-input threadplacement infraDamjan Marion1-0/+6
This change adds two new debug CLI command: - "show interface placmenet" to display which thread (main or worker) is responsible for processing interface rx queue vpp# show interface placement Thread 0 (vpp_main): node af-packet-input: host-vpp1 queue 0 Thread 1 (vpp_wk_0): node af-packet-input: host-virbr0 queue 0 Thread 2 (vpp_wk_1): node af-packet-input: host-vpp2 queue 0 host-lxcbr0 queue 0 - "set interface placmenet" to assign thread (main or worker) which process specific interface rx queue vpp# set interface placement host-vpp1 queue 0 main Change-Id: Id4dd00cf2b05e10fae2125ac7cb4411b446c5e9c Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-07CLI: hide deleted interfacesEyal Bari1-0/+3
Added a new interface flag - HIDDEN Indicates that the interface does not appear in CLI/API. Added three new interface functions: vnet_sw_interface_is_api_visible - indicates if the sw_if_index should be displayed vnet_swif_is_api_visible - variant for sw_interface vnet_sw_interface_is_api_valid - tests if the given if_index exists and is visible for future use by api functions Changed the unformat function to only accept visible interfaces Changed vxlan to add the HIDDEN flag to deleted interfaces This is the first part in a series to hide deleted interfaces from the API Change-Id: Ib43cc5cf1c450856560faf4e84126eb3671038e2 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-02-13Basic support for LISP-GPE encapsulated NSH packetsFlorin Coras1-1/+3
Change-Id: I97fedb0f70dd18ed9bbe985407cc5fe714e8a2e2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+658
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>