Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I642823bdc3c7006a0b719ec1e3a9cd75b2b37253
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 8f215b4a03a98bf94931a09b23ab0fbd8ccd1ab9)
|
|
To facilitate dispatch trajectory tracing, vlib_buffer_t decoding, etc.
through Wireshark
Change-Id: I31356b9fa1f40cba8830aaf10a86a9fbb7546438
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
It is not used and just confuses people...
Change-Id: Ic731432a785731271531f183b448e4591a1d2a8b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Idd4471a3adf7023e48e85717f00c786b1dde0cca
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I2eafac4ce810fe53454b729d81161ec80d036db7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
clang will emit a warning when the wrong enum type is passed to a
function whose arguments are an enum type. free bug finding...
Change-Id: I62215d8ef22c7527a31272e31f5d190e4e762e53
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This is first part of addition of atomic macros with only macros for
__sync builtins.
- Based on earlier patch by Damjan (https://gerrit.fd.io/r/#/c/10729/)
Additionally
- clib_atomic_release macro added and used in the absence
of any memory barrier.
- clib_atomic_bool_cmp_and_swap added
Change-Id: Ie4e48c1e184a652018d1d0d87c4be80ddd180a3b
Original-patch-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Sirshak Das <sirshak.das@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
|
|
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
also some moving of l2 headers to reduce dependencies
Change-Id: I7a700a411a91451ef13fd65f9c90de2432b793bb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This significantly reduces need for
...
in multiarch code. Simply constructor macros will jost create static unused
entry if CLIB_MARCH_VARIANT is defined and that will be optimized out by
compiler.
Change-Id: I17d1c4ac0c903adcfadaa4a07de1b854c7ab14ac
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I39f87ca161c891fb22462a23188982fef7c3243f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
with ip direct broadcast enable a packet to the interface's
subnet broadcast address with be sent L2 broadcast on the
interface. dissabled, it will be dropped. it is disabled by
default, which preserves current behaviour
Change-Id: If154cb92e64834e97a541b32624354348a0eafb3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
A pipe resembles a unix pipe. Each end of the pipe is a full
VPP interface.
pipes can be used for e.g. packet recirculation, inter-BD, etc.
Change-Id: I185bb9fb43dd233ff45da63ac1b85ae2e1ceca16
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Put error counters under node_index.
/err/<node-name>/<error-name>
E.g:
/err/ip4-lookup/Hash table collisions
/err/ip6-rewrite/Buffer allocation error
Error names are not globally unique, and this allows
for walking all errors for a particular node.
Put interface counters under the directory /if.
E.g. /if/rx
Put system counters under the directory /sys.
E.g. /sys/vector_rate
Change-Id: I5b794d16698f61bcb2063a8cd77a7c4ae36419b8
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This patch separates setting of hardware interfaec and software
interface MTU. Software MTU is L2 payload MTU (i.e. not including L2
header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set.
Currently only IP4, IP6 are enabled in adjacency / rewrite code.
Documentation in src/vnet/MTU.md
Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Due to union, l2 sub-interface bits were wrongly set
causing sporadic misconfiguration of l2 mode on some
interfaces.
Change-Id: Id77ee281e3a0030878641a786c22ffe16ce1c759
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ibea4a96bdec5e368301a03d8b11a0712fa0265e0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
When walking all adjacencies for a given {next-hop,interface} instead of
walking all the adjacencies on that interface and matching the next-hop
(which is O(n) in the number of adjacencies on that link, find all instances
of an adjacency with any link-type and wtih that {next-hop,interfacE} pair:
this is O(1).
Change-Id: Ic80399fc9e93c8df111379c039e592d8cafbab18
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
interface)"
This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa.
Reverting as this patch is causing following crash:
0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails
Aborted
Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
In dpdk based bonding, when the bond interface is configured for l2,
it automatically sets the bond interface to promiscuous mode and sets rx
redirect to ethernet-input. This allows traffic to be bridged to
non compute node facing interface when it is received from the compute
node interface.
For native vpp bonding, we need to do similar things. When the bond interface
is configured for l2, we set the slave interfaces to promiscuous mode
and set rx redirect to ethernet-input because dpdk does not know anything
about the bond interface. Likewise, when a new interface is enslaved, we also
need to do the same thing if the bond interface has already been configured
for l2.
Change-Id: I7e168008e8a4221be74929b2a20e6db0ce8f3110
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I50ff0cacf88182f8e0be19840c50f4954de586e2
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I32f68e2ee8f5d32962acdefb0193583f71d342b3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Use device-input and interface-output feautre arcs to collect unicast, multicast
and broadcast states for RX and TX resp. Since these feature arcs are present only
for 'physical' interfaces (i.e. not su-interfaces) counter collection is supported
only on parent interface types.
Change-Id: I915c235e336b0fc3a3c3de918f95dd674e4e0e4e
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: Iaceaba4dc22341c631c858516b960ce97c4aa564
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I7c75da358aff1bd0216a602a49f2909cef5d920d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Linux kernel and DPDK recognize the following Ethernet speeds:
10M, 100M, 1G, 2.5G, 5G, 10G, 20G, 25G, 40G, 50G, 56G and 100G.
Add consistent Ethernet speeds to VPP.
Change-Id: I4cfcf378fb34425c1206db5aa2f6bdcc66e0a6ab
Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
|
|
Change-Id: I1d3ede2b043e1fd4abc54f540bb1d3ac9863016e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0ee18df69d5fe833c746d0d1e14aac14338a6e42
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Modify interface creation to allow creation of tunnel interfaces
without dedicated per tunnel output and tx nodes which are not
used for most tunnel types. Also changed interface-output node
function vnet_per_buffer_interface_output() so it does not rely
on hw_if_index as the next node index which is not flexible nor
efficient for large scale tunnel interfaces.
The improvenemts are done for VXLAN, VXLAN-GPE, GENEVE and GTPU
tunnels. GRE tunnel is still using per tunnel output nodes which
will be changed in a separate patch with other GRE enhencements.
Change-Id: I4123c01c0d2ead814417a867adb8c8a407e4df55
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: Idb97e573961b3bc2acdeef77582314590795f8c3
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: I2cb6ce4e29813f6602b14e6e61713fb381fbcef8
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Cleanup mapping of interface output node for the l2-output node
when interface is configured to L2 or L3 modes. The mapping is
now always done in the main thread as part of API/CLI processing,
instead of initiate mapping in the forwarding path which can be
in the worker threads.
Change-Id: Ia789493e7d9f5c76d68edfaf34db43f3e3f53506
Signed-off-by: John Lo <loj@cisco.com>
(cherry picked from commit bea5ebf205e0bec922bf26c6c1a6a9392b4cad67)
|
|
Change-Id: Id117e219146d9994340fb38c00233ea67db8929b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
If interface is down and queues are not configured then we are not able
to change rx-mode. This change introducess default mode which is stored
per interface and applied if driver wants.
Change-Id: I70149c21c1530eafc148d5e4aa03fbee53dec62f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Interfaces with error state are not allowed to go admin up
Change-Id: I09fc09a5b28130aead219dccbc2e0f30ea7414cf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- When the interface rx-mode is changed via CLI, the corresponding device
may want to know about it and to reset the driver. This patch is to add
the callback.
- In the function vnet_hw_interface_set_rx_mode, it appears it is missing
a line
hw->rx_mode_by_queue[queue_id] = mode
because the function is checking if the new mode is the same as
hw->rx_mode_by_queue which is initialized to POLLING. So if the function is
called to change the mode to interrupt, it just returns without doing
anything. This is the check that I am talking about in the same function.
if (hw->rx_mode_by_queue[queue_id] == mode)
return 0;
Change-Id: Iaca2651c43e0ae3fda6fd8dc128e247b0851cc65
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: Ib506c3e9d66170f29e3266ad6dc4d32b829befba
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I23b588eb56a3f5690158449a1f9bc8053cd3d251
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This patch deprecates stack-based thread identification,
Also removes requirement that thread stacks are adjacent.
Finally, possibly annoying for some folks, it renames
all occurences of cpu_index and cpu_number with thread
index. Using word "cpu" is misleading here as thread can
be migrated ti different CPU, and also it is not related
to linux cpu index.
Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This change adds two new debug CLI command:
- "show interface placmenet" to display which
thread (main or worker) is responsible for processing
interface rx queue
vpp# show interface placement
Thread 0 (vpp_main):
node af-packet-input:
host-vpp1 queue 0
Thread 1 (vpp_wk_0):
node af-packet-input:
host-virbr0 queue 0
Thread 2 (vpp_wk_1):
node af-packet-input:
host-vpp2 queue 0
host-lxcbr0 queue 0
- "set interface placmenet" to assign thread (main or worker)
which process specific interface rx queue
vpp# set interface placement host-vpp1 queue 0 main
Change-Id: Id4dd00cf2b05e10fae2125ac7cb4411b446c5e9c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Added a new interface flag - HIDDEN
Indicates that the interface does not appear in CLI/API.
Added three new interface functions:
vnet_sw_interface_is_api_visible - indicates if the sw_if_index should be displayed
vnet_swif_is_api_visible - variant for sw_interface
vnet_sw_interface_is_api_valid - tests if the given if_index exists and is visible
for future use by api functions
Changed the unformat function to only accept visible interfaces
Changed vxlan to add the HIDDEN flag to deleted interfaces
This is the first part in a series to hide deleted interfaces from the API
Change-Id: Ib43cc5cf1c450856560faf4e84126eb3671038e2
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I97fedb0f70dd18ed9bbe985407cc5fe714e8a2e2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23
Signed-off-by: Damjan Marion <damarion@cisco.com>
|