Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I02c857da4cf6da5e0e55c1e48b63716af7ade0a9
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Some API action handlers called vl_msg_ai_send_shmem()
directly. That breaks Unix domain socket API transport.
A couple (bond / vhost) also tried to send a sw_interface_event
directly, but did not send the message to all that had
registred interest. That scheme never worked correctly.
Refactored and improved the interface event code.
Change-Id: Idb90edfd8703c6ae593b36b4eeb4d3ed7da5c808
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This reverts commit e63325e3ca03c847963863446345e6c80a2c0cfd.
Allow time for CSIT to accommodate.
Change-Id: I59435e4ab5e05e36a2796c3bf44889b5d4823cc2
Signed-off-by: ot@cisco.com
|
|
Use of consistent API types for interface.api
Change-Id: Ieb54cebb4ac96b432a3f0b41596718aa2f34885b
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Change-Id: I352f4a4adcf8771c21530657efcaecb532416612
Signed-off-by: Joe Zhou <zhouyoucn@qq.com>
|
|
Change-Id: I03c991cbf13c6d3599bfb5a60b18dc8ec9390414
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Idd4471a3adf7023e48e85717f00c786b1dde0cca
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I7dd48c8a2c77f82a2c1aa8311b062f5f0bc4e3fd
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I9228ce29e9d2fc862a2d076b4072bcdd728d6dd1
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
with ip direct broadcast enable a packet to the interface's
subnet broadcast address with be sent L2 broadcast on the
interface. dissabled, it will be dropped. it is disabled by
default, which preserves current behaviour
Change-Id: If154cb92e64834e97a541b32624354348a0eafb3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This patch separates setting of hardware interfaec and software
interface MTU. Software MTU is L2 payload MTU (i.e. not including L2
header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set.
Currently only IP4, IP6 are enabled in adjacency / rewrite code.
Documentation in src/vnet/MTU.md
Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: If01400e3434b25b2da36ba28ceb8444b216d0e38
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
interface)"
This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa.
Reverting as this patch is causing following crash:
0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails
Aborted
Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Use device-input and interface-output feautre arcs to collect unicast, multicast
and broadcast states for RX and TX resp. Since these feature arcs are present only
for 'physical' interfaces (i.e. not su-interfaces) counter collection is supported
only on parent interface types.
Change-Id: I915c235e336b0fc3a3c3de918f95dd674e4e0e4e
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I7c75da358aff1bd0216a602a49f2909cef5d920d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Iae5532c3d53e208831f3b2782242d9e59d367087
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I4b5b60e7c6f618bb935eab1e96a2e79bbb14f58f
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
- setting MTU on an interface updates the L3 max bytes too
- value cached in the adjacency is also updated
- MTU exceeded generates ICMP to sender
Change-Id: I343ec71d8e903b529594c4bd0543f04bc7f370b3
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
This does not update api client code. In other words, if the client
assumes the transport is shmem based, this patch does not change that.
Furthermore, code that checks queue size, for tail dropping, is not
updated.
Done for the following apis:
Plugins
- acl
- gtpu
- memif
- nat
- pppoe
VNET
- bfd
- bier
- tapv2
- vhost user
- dhcp
- flow
- geneve
- ip
- punt
- ipsec/ipsec-gre
- l2
- l2tp
- lisp-cp/one-cp
- lisp-gpe
- map
- mpls
- policer
- session
- span
- udp
- tap
- vxlan/vxlan-gpe
- interface
VPP
- api/api.c
OAM
- oam_api.c
Stats
- stats.c
Change-Id: I0e33ecefb2bdab0295698c0add948068a5a83345
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- separate client/server code for both memory and socket apis
- separate memory api code from generic vlib api code
- move unix_shared_memory_fifo to svm and rename to svm_fifo_t
- overall declutter
Change-Id: I90cdd98ff74d0787d58825b914b0f1eafcfa4dc2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- makes the VAPI generated file more consumable.
- VOM build times improve.
Change-Id: I838488930bd23a0d3818adfdffdbca3eead382df
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Store and pass MAC address as 6 byte u8 array instead of u64 to
make MAC address handling in set interface MAC endian neutral.
The previous API handler only works for little endian.
Change-Id: Ie4ec33a840bc5122ab1f17e25977e58f3466253b
Signed-off-by: John Lo <loj@cisco.com>
|
|
Also add vat test code to test the subject API. The format is
sw_interface_set_rx_mode sw_if_index <index> [queue <id>]
<polling|nterrupt|adaptive>
Change-Id: Ib810d85d430077865bead8cc08a070f8ae478225
Signed-off-by: Steven <sluong@cisco.com>
|
|
This reverts commit f9342023c19887da656133e2688a90d70383b0c5.
Reverting to unblock master. No idea why jjb +1ed this patch! On closer inspection it looks like it -1ed it and subsequently changed opinion. CSIT tests should be fixed before re-merging.
Change-Id: I26608912a962c52083073e16c7c9d2cc44a3cc8d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
last i the serise of the use of the FIB table create/delete API. VPP now forces the tables to have been explicitly creted before they are used.
Change-Id: Ifde3b1bbb76697a01ab71bce4f5264e6d1725467
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I7b175d57b85e626aab00221b6dac0498aebcbeae
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- Teach vpp_api_test to send/receive API messages over sockets
- Add memfd-based shared memory
- Add api messages to create memfd-based shared memory segments
- vpp_api_test supports both socket and shared memory segment connections
- vpp_api_test pivot from socket to shared memory API messaging
- add socket client support to libvlibclient.so
- dead client reaper sends ping messages, container-friendly
- dead client reaper falls back to kill (<pid>, 0) live checking
if e.g. a python app goes silent for tens of seconds
- handle ping messages in python client support code
- teach show api ring about pairwise shared-memory segments
- fix ip probing of already resolved destinations (VPP-998)
We'll need this work to implement proper host-stack client isolation
Change-Id: Ic23b65f75c854d0393d9a2e9d6b122a9551be769
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Identify and complain when the same IP prefix is assigned
to two different SW interfaces:
vpp# set int ip address TenGigabitEthernet6/0/0 1.2.3.4/32
vpp# set int ip address TenGigabitEthernet6/0/1 1.2.3.4/32
set interface ip address: Prefix 1.2.3.4/32 already found on
interface TenGigabitEthernet6/0/0
Change-Id: I1aee1b6a7ddd00d3109a53d8e1b6ce97bf45e372
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: I6cab79c266837a8731adcf78c9e093dfa6be0ead
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
part 2;
- this adds the code to create an IP and MPLS table via the API.
- but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass.
Change-Id: Id124d884ade6cb7da947225200e3bb193454c555
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
The handler was calling the routines with sw_if_index instead of hw_if_index,
fix that by an extra call to vnet_get_sw_interface, and check that the interface
type is VNET_SW_INTERFACE_TYPE_HARDWARE before proceeding.
Change-Id: I4a6f65f44e250ecdb2b72d2693c9d7db5a52b966
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 778df28c2a1520f58c293700c578bdd73e61cecf)
|
|
At this pointin the game, events do not have an associated context. they have the client_index and pid instead.
Change-Id: I5052cab78f710bba630a61d2390acbaa1b3813ab
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I06a10a4291e61aec3f1396d2514ed6fe3901897a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Change-Id: I316862e1d33e5d10c058317cc4827304e55ceba4
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: I4467f26da5bdcfd76e5914e0124a83b659757947
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I6424a083ec889961ba4d0cd1df8348f20436be14
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
allow this config to function:
set int ip address loop0 169.254.1.1/32 (the default GW address for attached hosts)
set int unnumbered af_packet0 use loop0 ('enable' IP on the host interface)
ip route add 192.168.1.1/32 via af_packet0 (where to find the host)
repeat for each host and host interface.
Inter-host communication is throught the /32 routes.
To allow this:
1 - attached host routes have the ATTACHED flag set, so the ARP code accepts then as legitimate sources
2 - unnumbered interfaces inherit the source address from the IP interface
Change-Id: Ib66c5f0e848c528f79372813adc3a0c11b50717f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
validate interfaces - added check for hidden interfaces
interface dump - dont send hidden interfaces
set_unnumbered - test for hidden
vl_api_create_vlan_subif_t_handler, vl_api_create_subif_t_handler - fixed potential memory leak
some other minor refactors to make code clearer and shorter
Change-Id: Icce6b724336b7d1536fbd07a74bf7abe4916d2c0
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
expression as the destination
warning translates as an invalid write :
sizeof(u8* b_dmac) == 8 != sizeof(eth_hdr->dst_address) == 6
~/vpp/build-data/../src/vnet/l2/l2_vtr.c: In function 'l2pbb_get':
~/vpp/build-data/../src/vnet/l2/l2_vtr.c:734:63: error: argument to 'sizeof' in 'memcpy' call is the same expression as the destination;
did you mean to provide an explicit length? [-Werror=sizeof-pointer-memaccess]
~/vpp/build-data/../src/vnet/l2/l2_vtr.c:736:63: error: argument to 'sizeof' in 'memcpy' call is the same expression as the destination;
did you mean to provide an explicit length? [-Werror=sizeof-pointer-memaccess]
update l2pbb_get to take an ethernet header instead of two u8* pointers
for source and dest mac addresses.
Change-Id: Ifcf1319a9e22614d57682f940e10f0420dc6fb8c
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
DHCPv6. For the same table ID, the unicast-FIB index is not necessarily the same value as the multicast-FIB index, since features (like LISP, SR) can create unicast-tables, and thus affect only the index of the unicast FIBs
Change-Id: Ibfa334d7eda822f742c241b7ce69a6271b4753a9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
has an address configured (VPP-601)
Change-Id: I311fc264f73dd3b2b3ce9d7d1c33cd0515b36c4a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Removed a fair number of "BUG" message handlers, due to conflicts with
actual message handlers in api_format.c. Vpp itself had no business
receiving certain messages, up to the point where we started building
in relevant code from vpp_api_test.
Eliminated all but one duplicate registration complaint. That one
needs attention from the vxlan team since the duplicated handlers have
diverged.
Change-Id: Iafce5429d2f906270643b4ea5f0130e20beb4d1d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Extended sw_interface_dump to provide 802.1ah (pbb) tag rewrite info if
present.
Extended log "l2-output" to provide raw data to display result of
prospetive pbb tag rewrite. Tracing is moved after l2output_vtr to show
these changes.
Change-Id: I8b7cb865dc67ce21afab402cc086dac35f7c0f07
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23
Signed-off-by: Damjan Marion <damarion@cisco.com>
|