Age | Commit message (Collapse) | Author | Files | Lines |
|
last i the serise of the use of the FIB table create/delete API. VPP now forces the tables to have been explicitly creted before they are used.
Change-Id: Ifde3b1bbb76697a01ab71bce4f5264e6d1725467
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I7b175d57b85e626aab00221b6dac0498aebcbeae
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- Teach vpp_api_test to send/receive API messages over sockets
- Add memfd-based shared memory
- Add api messages to create memfd-based shared memory segments
- vpp_api_test supports both socket and shared memory segment connections
- vpp_api_test pivot from socket to shared memory API messaging
- add socket client support to libvlibclient.so
- dead client reaper sends ping messages, container-friendly
- dead client reaper falls back to kill (<pid>, 0) live checking
if e.g. a python app goes silent for tens of seconds
- handle ping messages in python client support code
- teach show api ring about pairwise shared-memory segments
- fix ip probing of already resolved destinations (VPP-998)
We'll need this work to implement proper host-stack client isolation
Change-Id: Ic23b65f75c854d0393d9a2e9d6b122a9551be769
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Identify and complain when the same IP prefix is assigned
to two different SW interfaces:
vpp# set int ip address TenGigabitEthernet6/0/0 1.2.3.4/32
vpp# set int ip address TenGigabitEthernet6/0/1 1.2.3.4/32
set interface ip address: Prefix 1.2.3.4/32 already found on
interface TenGigabitEthernet6/0/0
Change-Id: I1aee1b6a7ddd00d3109a53d8e1b6ce97bf45e372
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: I6cab79c266837a8731adcf78c9e093dfa6be0ead
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
part 2;
- this adds the code to create an IP and MPLS table via the API.
- but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass.
Change-Id: Id124d884ade6cb7da947225200e3bb193454c555
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
The handler was calling the routines with sw_if_index instead of hw_if_index,
fix that by an extra call to vnet_get_sw_interface, and check that the interface
type is VNET_SW_INTERFACE_TYPE_HARDWARE before proceeding.
Change-Id: I4a6f65f44e250ecdb2b72d2693c9d7db5a52b966
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 778df28c2a1520f58c293700c578bdd73e61cecf)
|
|
At this pointin the game, events do not have an associated context. they have the client_index and pid instead.
Change-Id: I5052cab78f710bba630a61d2390acbaa1b3813ab
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I06a10a4291e61aec3f1396d2514ed6fe3901897a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Change-Id: I316862e1d33e5d10c058317cc4827304e55ceba4
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: I4467f26da5bdcfd76e5914e0124a83b659757947
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I6424a083ec889961ba4d0cd1df8348f20436be14
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
allow this config to function:
set int ip address loop0 169.254.1.1/32 (the default GW address for attached hosts)
set int unnumbered af_packet0 use loop0 ('enable' IP on the host interface)
ip route add 192.168.1.1/32 via af_packet0 (where to find the host)
repeat for each host and host interface.
Inter-host communication is throught the /32 routes.
To allow this:
1 - attached host routes have the ATTACHED flag set, so the ARP code accepts then as legitimate sources
2 - unnumbered interfaces inherit the source address from the IP interface
Change-Id: Ib66c5f0e848c528f79372813adc3a0c11b50717f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
validate interfaces - added check for hidden interfaces
interface dump - dont send hidden interfaces
set_unnumbered - test for hidden
vl_api_create_vlan_subif_t_handler, vl_api_create_subif_t_handler - fixed potential memory leak
some other minor refactors to make code clearer and shorter
Change-Id: Icce6b724336b7d1536fbd07a74bf7abe4916d2c0
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
expression as the destination
warning translates as an invalid write :
sizeof(u8* b_dmac) == 8 != sizeof(eth_hdr->dst_address) == 6
~/vpp/build-data/../src/vnet/l2/l2_vtr.c: In function 'l2pbb_get':
~/vpp/build-data/../src/vnet/l2/l2_vtr.c:734:63: error: argument to 'sizeof' in 'memcpy' call is the same expression as the destination;
did you mean to provide an explicit length? [-Werror=sizeof-pointer-memaccess]
~/vpp/build-data/../src/vnet/l2/l2_vtr.c:736:63: error: argument to 'sizeof' in 'memcpy' call is the same expression as the destination;
did you mean to provide an explicit length? [-Werror=sizeof-pointer-memaccess]
update l2pbb_get to take an ethernet header instead of two u8* pointers
for source and dest mac addresses.
Change-Id: Ifcf1319a9e22614d57682f940e10f0420dc6fb8c
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
DHCPv6. For the same table ID, the unicast-FIB index is not necessarily the same value as the multicast-FIB index, since features (like LISP, SR) can create unicast-tables, and thus affect only the index of the unicast FIBs
Change-Id: Ibfa334d7eda822f742c241b7ce69a6271b4753a9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
has an address configured (VPP-601)
Change-Id: I311fc264f73dd3b2b3ce9d7d1c33cd0515b36c4a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Removed a fair number of "BUG" message handlers, due to conflicts with
actual message handlers in api_format.c. Vpp itself had no business
receiving certain messages, up to the point where we started building
in relevant code from vpp_api_test.
Eliminated all but one duplicate registration complaint. That one
needs attention from the vxlan team since the duplicated handlers have
diverged.
Change-Id: Iafce5429d2f906270643b4ea5f0130e20beb4d1d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Extended sw_interface_dump to provide 802.1ah (pbb) tag rewrite info if
present.
Extended log "l2-output" to provide raw data to display result of
prospetive pbb tag rewrite. Tracing is moved after l2output_vtr to show
these changes.
Change-Id: I8b7cb865dc67ce21afab402cc086dac35f7c0f07
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23
Signed-off-by: Damjan Marion <damarion@cisco.com>
|