aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/interface_cli.c
AgeCommit message (Collapse)AuthorFilesLines
2019-05-03mp_safe SW_INTERFACE_DUMP, SW_INTERFACE_DETAILS, SW_INTERFACE_TAG_ADD_DEL,Steven Luong1-0/+1
BRIDGE_DOMAIN_DUMP, CONTROL_PING, CONTROL_PING_REPLY, and show interface CLI Change-Id: I2927573b66bb5dd134b37ffb72af0e6676750917 Signed-off-by: Steven Luong <sluong@cisco.com> (cherry picked from commit 15c31921a628c5500cbed2ebc588d7ddbaa970a3)
2019-04-05fix pcap_trace cli output issueJack Xu1-2/+4
Change-Id: Ia2be56e198c960788430705b356170f8cc12c450 Signed-off-by: Jack Xu <jack.c.xu@ericsson.com>
2019-02-26Move pcap rx/tx trace code out of the dpdk pluginDave Barach1-0/+286
Moved code to the ethernet input node, and the interface output path(s). Since we no longer skip ethernet-input, there's no reason for device drivers to know anything about pcap rx tracing, etc. Change-Id: I08d32fb1b90cbee1bd4f609837d533e047b36fa4 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-13L2 feautre bitmaps output verbose/non-verbose modeNeale Ranns1-2/+3
Change-Id: I15ff191ee8724a3354c074db590472db05e0652e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-23c11 safe string handling supportDave Barach1-1/+1
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-09-26vnet: show interface rx-placement may display garbage charactersSteven1-1/+1
Before ------ DBGvpp# sh int rx-mode sh int rx-mode Thread 1 (vpp_wk_0^@): node vmxnet3-input: vmxnet3-0/b/0/0 queue 0 (polling) Thread 2 (vpp_wk_1^@): node vmxnet3-input: vmxnet3-0/13/0/0 queue 0 (polling) DBGvpp# After ----- DBGvpp# sh int rx-placement sh int rx-placement Thread 1 (vpp_wk_0): node vmxnet3-input: vmxnet3-0/b/0/0 queue 0 (polling) Thread 2 (vpp_wk_1): node vmxnet3-input: vmxnet3-0/13/0/0 queue 0 (polling) DBGvpp# Change-Id: I5910d502757054c3942fac9d20c5104e95fc6b56 Signed-off-by: Steven <sluong@cisco.com>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra1-4/+4
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-08-24rx-placement: Add API call for interface rx-placementMohsin Kazmi1-23/+42
Change-Id: I9228ce29e9d2fc862a2d076b4072bcdd728d6dd1 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-07-20IP directed broadcastNeale Ranns1-0/+40
with ip direct broadcast enable a packet to the interface's subnet broadcast address with be sent L2 broadcast on the interface. dissabled, it will be dropped. it is disabled by default, which preserves current behaviour Change-Id: If154cb92e64834e97a541b32624354348a0eafb3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-06-11MTU: Software interface / Per-protocol MTU supportOle Troan1-14/+36
This patch separates setting of hardware interfaec and software interface MTU. Software MTU is L2 payload MTU (i.e. not including L2 header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set. Currently only IP4, IP6 are enabled in adjacency / rewrite code. Documentation in src/vnet/MTU.md Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690 Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-27VPP-1294: add missing feature arc constraintDave Barach1-39/+51
the ip4-dhcp-client-detect feature MUST run prior to nat44-out2in, or inbound dhcp broadcast packets will be dropped. Certain dhcp servers answer lease renewal dhcp-request packets with broadcast dhcp-acks, leading to unrecoverable lease loss. In detail, this constraint: VNET_FEATURE_INIT (ip4_snat_out2in, static) = { .arc_name = "ip4-unicast", .node_name = "nat44-out2in", .runs_after = VNET_FEATURES ("acl-plugin-in-ip4-fa"), }; doesn't get the job done: ip4-unicast: [17] nat44-out2in [23] ip4-dhcp-client-detect [26] ip4-not-enabled Add a proper constraint: VNET_FEATURE_INIT (ip4_snat_out2in, static) = { .arc_name = "ip4-unicast", .node_name = "nat44-out2in", .runs_after = VNET_FEATURES ("acl-plugin-in-ip4-fa", "ip4-dhcp-client-detect"), }; and the interface feature order is OK, at least in this regard: ip4-unicast: [17] ip4-dhcp-client-detect [18] nat44-out2in [26] ip4-not-enabled We need to carefully audit (especially) the ip4-unicast feature arc, which has [gasp] 37 features on it! Change-Id: I5e749ead7ab2a25d80839a331de6261e112977ad Signed-off-by: Dave Barach <dave@barachs.net>
2018-04-13Revert "MTU: Setting of MTU on software interface (instead of hardware ↵Damjan Marion1-20/+23
interface)" This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa. Reverting as this patch is causing following crash: 0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails Aborted Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13MTU: Setting of MTU on software interface (instead of hardware interface)Ole Troan1-23/+20
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-18Remove unnumbered configuration on interface deleteNeale Ranns1-41/+13
Change-Id: Iae5532c3d53e208831f3b2782242d9e59d367087 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-02-12Improve MTU handlingNeale Ranns1-6/+1
- setting MTU on an interface updates the L3 max bytes too - value cached in the adjacency is also updated - MTU exceeded generates ICMP to sender Change-Id: I343ec71d8e903b529594c4bd0543f04bc7f370b3 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-01-13Improve "show xxx tunnel" and "show int addr" outputJohn Lo1-65/+45
Improve "show xxx tunnel" output functions format_xxx_tunnel() for GRE, VXLAN, VXLAN-GPE, GENEVE and GTPU tunnels to make their output more consistent and provide better information. Improved the output of "show int addr" to make its info more consistent with tunnels and provide fib-index info. Change-Id: Icd4b5b85a5bec417f8ee19afea336c770ad3b4c5 Signed-off-by: John Lo <loj@cisco.com>
2017-10-31Fix set interface mac address API to be endian neutralJohn Lo1-2/+2
Store and pass MAC address as 6 byte u8 array instead of u64 to make MAC address handling in set interface MAC endian neutral. The previous API handler only works for little endian. Change-Id: Ie4ec33a840bc5122ab1f17e25977e58f3466253b Signed-off-by: John Lo <loj@cisco.com>
2017-10-29devices: Add binary API for set interface <interface> rx-modeSteven1-18/+31
Also add vat test code to test the subject API. The format is sw_interface_set_rx_mode sw_if_index <index> [queue <id>] <polling|nterrupt|adaptive> Change-Id: Ib810d85d430077865bead8cc08a070f8ae478225 Signed-off-by: Steven <sluong@cisco.com>
2017-10-04Set MAC address needs the HW interface indexNeale Ranns1-1/+3
Change-Id: I7b175d57b85e626aab00221b6dac0498aebcbeae Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-07Devices: Set interface rx-mode may cause SIGSEGV with nonexistent queueSteven1-2/+7
When I type in set interface rx-mode with a nonexistent queue, I got a crash with the following traceback. It looks like the vm is NULL when vlib_node_get_runtime is called. DBGvpp# sh int rx Thread 0 (vpp_main): node dpdk-input: TenGigabitEthernet5/0/0 queue 0 (polling) TenGigabitEthernet5/0/1 queue 0 (polling) TenGigabitEthernet7/0/0 queue 0 (polling) TenGigabitEthernet7/0/1 queue 0 (polling) node vhost-user-input: VirtualEthernet0/0/2 queue 0 (adaptive) DBGvpp# set interface rx-mode VirtualEthernet0/0/2 queue 1 polling Thread 1 "vpp_main" received signal SIGSEGV, Segmentation fault. 0x00007ffff6d4e0bc in vlib_node_get_runtime (vm=0x0, node_index=125) at /home/sluong/vpp/build-data/../src/vlib/node_funcs.h:92 92 vlib_node_t *n = vec_elt (nm->nodes, node_index); (gdb) where at /home/sluong/vpp/build-data/../src/vlib/node_funcs.h:92 at /home/sluong/vpp/build-data/../src/vlib/node_funcs.h:112 vnm=0x6f0fa0 <vnet_main>, hw_if_index=7, queue_id=1, mode=0x7fffb62099e8) at /home/sluong/vpp/build-data/../src/vnet/devices/devices.c:307 hw_if_index=7, queue_id=1, mode=VNET_HW_INTERFACE_RX_MODE_POLLING) at /home/sluong/vpp/build-data/../src/vnet/interface_cli.c:1192 vm=0x7ffff7b9d440 <vlib_global_main>, input=0x7fffb6209ef0, cmd=0x7fffb61d5d14) at /home/sluong/vpp/build-data/../src/vnet/interface_cli.c:1288 vm=0x7ffff7b9d440 <vlib_global_main>, cm=0x7ffff7b9d630 <vlib_global_main+496>, input=0x7fffb6209ef0, parent_command_index=18) at /home/sluong/vpp/build-data/../src/vlib/cli.c:588 vm=0x7ffff7b9d440 <vlib_global_main>, cm=0x7ffff7b9d630 <vlib_global_main+496>, input=0x7fffb6209ef0, parent_command_index=12) The fix is to add a check for vec_len(hw->input_node_thread_index_by_queue) and vec_len (hw->rx_mode_by_queue) to reject the command if the queue_id is out of bound. While at it, I notice inputting queue_id=-1 is being interpreted as all queues. An easy fix is to not overload the queue_id variable with -1 to mean something else. Change-Id: Id70ec3e7d06ccc67635e6d28ef53420bdac4a988 Signed-off-by: Steven <sluong@cisco.com>
2017-08-15VPP-939: Update CLI Helptext for rx-placement commandsBilly McFall1-94/+264
The CLI commands were change from 'set/show interface placement' to 'set/show interface rx-placement', but the associated help text was not updated. On the 'set interface rx-placement', some of the parameters were renamed, which was confusing when looking at the documentation for help. While in the file interface_cli.c, cleaned up several other CLI commands. There are still other commands in the file that need addressing. Change-Id: Ifdc357c73ad9f3362133c495217b5a6b3a411eab Signed-off-by: Billy McFall <bmcfall@redhat.com>
2017-07-31CLI:add l2 input/outut to "sh int features"Eyal Bari1-14/+28
Change-Id: If608bbc7f4c8b0d5c3a237098a20279e407c82d3 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-06devices: show interface rx-placement displays the wrong information (VPP-894)Steven1-1/+3
show interface rx-placement somtimes displays the wrong interface names. This happens when there exists subinterfaces in VPP. The problem is due to the function show_interface_rx_placement_fn is calling format_vnet_sw_if_index_name with hw_if_index instead of sw_if_index. VPP has the concept of sw_if_index and hw_if_index. Each serves a different purpose. When there is no subinterfaces, both hw_if_index and sw_if_index may happen to have the same value. But don't count on it. When the API calls for sw_if_index, we must pass the sw_if_index although the hw_if_index has the same type which the compiler does not catch. Passing hw_if_index for an API which requires sw_if_index may have an unpredictable result such as described in the VPP-894 and sometimes it may even crash if the particular index does not exist. Change-Id: I76c4834f79b88a1c20684fcba64f14b2da142d77 Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit bafa4d048439fdbcc0bd577e43a2784d1b89bfc5)
2017-06-21Introduce default rx mode for device driversDamjan Marion1-6/+12
If interface is down and queues are not configured then we are not able to change rx-mode. This change introducess default mode which is stored per interface and applied if driver wants. Change-Id: I70149c21c1530eafc148d5e4aa03fbee53dec62f Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-16Add missing barrier sync to rx placement infra codeDamjan Marion1-1/+3
Change-Id: I25ccf8260dbe7e1550aee3904a688fc135ce1f03 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-10device: Add callback for set interface rx-modeSteven1-18/+54
- When the interface rx-mode is changed via CLI, the corresponding device may want to know about it and to reset the driver. This patch is to add the callback. - In the function vnet_hw_interface_set_rx_mode, it appears it is missing a line hw->rx_mode_by_queue[queue_id] = mode because the function is checking if the new mode is the same as hw->rx_mode_by_queue which is initialized to POLLING. So if the function is called to change the mode to interrupt, it just returns without doing anything. This is the check that I am talking about in the same function. if (hw->rx_mode_by_queue[queue_id] == mode) return 0; Change-Id: Iaca2651c43e0ae3fda6fd8dc128e247b0851cc65 Signed-off-by: Steven <sluong@cisco.com>
2017-05-02Add interface rx mode commands, unify rx mode and placement CLIDamjan Marion1-0/+238
Change-Id: Ib506c3e9d66170f29e3266ad6dc4d32b829befba Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-27vnet: update help message for intfc stateRay Kinsella1-1/+1
Add useful help information on set interface state. Change-Id: Ibcdcea2849ccaee4cc72bf38d79102beb0d4be11 Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
2017-03-29Coverity Error: logically dead code in IP unnumbered CLINeale Ranns1-4/+0
Change-Id: Id3398bd4b7a56c168aaab37942b92715e19d4025 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-26Rename "show interfaces" -> "show interface"Dave Barach1-2/+2
To line up with "show interface placement," recently added. Otherwise, "show int" refers only to "show interface placement," which tends to annoy the cash customers... Change-Id: Iea9e3681aeb051e2b0e1ecbf06706d98af9a3abf Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-18Check change in unnumbered setting before updating IP enabled stateNeale Ranns1-4/+15
Change-Id: I6424a083ec889961ba4d0cd1df8348f20436be14 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17Attached hostsNeale Ranns1-0/+12
allow this config to function: set int ip address loop0 169.254.1.1/32 (the default GW address for attached hosts) set int unnumbered af_packet0 use loop0 ('enable' IP on the host interface) ip route add 192.168.1.1/32 via af_packet0 (where to find the host) repeat for each host and host interface. Inter-host communication is throught the /32 routes. To allow this: 1 - attached host routes have the ATTACHED flag set, so the ARP code accepts then as legitimate sources 2 - unnumbered interfaces inherit the source address from the IP interface Change-Id: Ib66c5f0e848c528f79372813adc3a0c11b50717f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-07CLI: hide deleted interfacesEyal Bari1-2/+3
Added a new interface flag - HIDDEN Indicates that the interface does not appear in CLI/API. Added three new interface functions: vnet_sw_interface_is_api_visible - indicates if the sw_if_index should be displayed vnet_swif_is_api_visible - variant for sw_interface vnet_sw_interface_is_api_valid - tests if the given if_index exists and is visible for future use by api functions Changed the unformat function to only accept visible interfaces Changed vxlan to add the HIDDEN flag to deleted interfaces This is the first part in a series to hide deleted interfaces from the API Change-Id: Ib43cc5cf1c450856560faf4e84126eb3671038e2 Signed-off-by: Eyal Bari <ebari@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+1165
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>