summaryrefslogtreecommitdiffstats
path: root/src/vnet/interface_funcs.h
AgeCommit message (Collapse)AuthorFilesLines
2019-03-22ADJ: more thorough link up checkNeale Ranns1-2/+17
Change-Id: I04dbfb914706b25fcc3bd6ee0d19cfdc810234ae Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-19tap gso: experimental supportAndrew Yourtchenko1-0/+2
This commit adds a "gso" parameter to existing "create tap..." CLI, and a "no-gso" parameter for the compatibility with the future, when/if defaults change. It makes use of the lowest bit of the "tap_flags" field in the API call in order to allow creation of GSO interfaces via API as well. It does the necessary syscalls to enable the GSO and checksum offload support on the kernel side and sets two flags on the interface: virtio-specific virtio_if_t.gso_enabled, and vnet_hw_interface_t.flags & VNET_HW_INTERFACE_FLAG_SUPPORTS_GSO. The first one, if enabled, triggers the marking of the GSO-encapsulated packets on ingress with VNET_BUFFER_F_GSO flag, and setting vnet_buffer2(b)->gso_size to the desired L4 payload size. VNET_HW_INTERFACE_FLAG_SUPPORTS_GSO determines the egress packet processing in interface-output for such packets: When the flag is set, they are sent out almost as usual (just taking care to set the vnet header for virtio). When the flag is not enabled (the case for most interfaces), the egress path performs the re-segmentation such that the L4 payload of the transmitted packets equals gso_size. The operations in the datapath are enabled only when there is at least one GSO-compatible interface in the system - this is done by tracking the count in interface_main.gso_interface_count. This way the impact of conditional checks for the setups that do not use GSO is minimized. "show tap" CLI shows the state of the GSO flag on the interface, and the total count of GSO-enabled interfaces (which is used to enable the GSO-related processing in the packet path). This commit lacks IPv6 extension header traversal support of any kind - the L4 payload is assumed to follow the IPv6 header. Also it performs the offloads only for TCP (TSO - TCP segmentation offload). The UDP fragmentation offload (UFO) is not part of it. For debug purposes it also adds the debug CLI: "set tap gso {<interface> | sw_if_index <sw_idx>} <enable|disable>" Change-Id: Ifd562db89adcc2208094b3d1032cee8c307aaef9 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-02-02Deprecate old mutliarch code, phase 1Damjan Marion1-2/+0
It is causing compilation sloness with gcc-7 so removing it before it was originally planned. So far macros are left in the tree so we can know which nodes to convert to new multiarch code. Change-Id: Idb14622ca61fdce1eba59723b20d98715b7971e6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-08vnet: store hw interface speed in kbps instead of using flagsDamjan Marion1-0/+8
Change-Id: Idd4471a3adf7023e48e85717f00c786b1dde0cca Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-07GBP Endpoint LearningNeale Ranns1-0/+7
Learning GBP endpoints over vxlan-gbp tunnels Change-Id: I1db9fda5a16802d9ad8b4efd4e475614f3b21502 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-10-30change mac address functions take const macNeale Ranns1-1/+1
Change-Id: Ia68db22b917e9af1394c00e5a6b3df134bfd1568 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-27Enumify interface flagsNeale Ranns1-2/+2
clang will emit a warning when the wrong enum type is passed to a function whose arguments are an enum type. free bug finding... Change-Id: I62215d8ef22c7527a31272e31f5d190e4e762e53 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-24rx-placement: Add API call for interface rx-placementMohsin Kazmi1-0/+4
Change-Id: I9228ce29e9d2fc862a2d076b4072bcdd728d6dd1 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-07-20IP directed broadcastNeale Ranns1-1/+3
with ip direct broadcast enable a packet to the interface's subnet broadcast address with be sent L2 broadcast on the interface. dissabled, it will be dropped. it is disabled by default, which preserves current behaviour Change-Id: If154cb92e64834e97a541b32624354348a0eafb3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-15VPP-1341: fix loopback interface graph arcsDave Barach1-0/+1
Remove broken special case from l2_input.c:set_int_l2_mode(), which turns out to confuse the graph dispatch engine. The loopback TX function needs to push packets to either ethernet-input or to l2-input, based on bridge / BVI configuration. Rather than overloading a single graph arc - and making vain attempts to reconfigure it - create both arcs and use the correct one. Rewrote the loopback tx function as an idosyncratic multi-arch quad/single loop fn. Change-Id: I15b56ce641d90a11e7b3c7d23859f40e168dd7b2 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-07PipesNeale Ranns1-1/+17
A pipe resembles a unix pipe. Each end of the pipe is a full VPP interface. pipes can be used for e.g. packet recirculation, inter-BD, etc. Change-Id: I185bb9fb43dd233ff45da63ac1b85ae2e1ceca16 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-06-11MTU: Software interface / Per-protocol MTU supportOle Troan1-9/+16
This patch separates setting of hardware interfaec and software interface MTU. Software MTU is L2 payload MTU (i.e. not including L2 header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set. Currently only IP4, IP6 are enabled in adjacency / rewrite code. Documentation in src/vnet/MTU.md Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690 Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-25ARP proxy dumpsNeale Ranns1-2/+25
Change-Id: I8335ebf266becf2f42bb3f28a17dfed8d9b08f97 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-10vnet: device flow offload infraDamjan Marion1-0/+22
Change-Id: Ibea4a96bdec5e368301a03d8b11a0712fa0265e0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13Revert "MTU: Setting of MTU on software interface (instead of hardware ↵Damjan Marion1-13/+12
interface)" This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa. Reverting as this patch is causing following crash: 0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails Aborted Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13MTU: Setting of MTU on software interface (instead of hardware interface)Ole Troan1-12/+13
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901 Signed-off-by: Ole Troan <ot@cisco.com>
2018-04-04Detailed stats collection featureNeale Ranns1-0/+3
Use device-input and interface-output feautre arcs to collect unicast, multicast and broadcast states for RX and TX resp. Since these feature arcs are present only for 'physical' interfaces (i.e. not su-interfaces) counter collection is supported only on parent interface types. Change-Id: I915c235e336b0fc3a3c3de918f95dd674e4e0e4e Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-03-18Remove unnumbered configuration on interface deleteNeale Ranns1-0/+4
Change-Id: Iae5532c3d53e208831f3b2782242d9e59d367087 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-02-27vnet/interface: vnet_(put|get)frame_to_sw_interface is not worker thread awareSteven1-2/+2
When heavy traffic is running using worker threads, it may crash here DBGvpp# 0: /home/sluong/vpp3/vpp/build-data/../src/vlib/main.c:1128 (dispatch_pending_node) assertion `f->flags & VLIB_FRAME_PENDING' fails Thread 1 "vpp_main" received signal SIGABRT, Aborted. 0x00007ffff5d50428 in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:54 54 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory. (gdb) No crash was observed if only main thread was used. Change-Id: I96f8b02ec23accc85c0f1ddecfeff6043b5e3c2b Signed-off-by: Steven <sluong@cisco.com>
2018-02-12Improve MTU handlingNeale Ranns1-0/+3
- setting MTU on an interface updates the L3 max bytes too - value cached in the adjacency is also updated - MTU exceeded generates ICMP to sender Change-Id: I343ec71d8e903b529594c4bd0543f04bc7f370b3 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-01-24Improve tunnel interface creation performanceJohn Lo1-0/+8
Modify interface creation to allow creation of tunnel interfaces without dedicated per tunnel output and tx nodes which are not used for most tunnel types. Also changed interface-output node function vnet_per_buffer_interface_output() so it does not rely on hw_if_index as the next node index which is not flexible nor efficient for large scale tunnel interfaces. The improvenemts are done for VXLAN, VXLAN-GPE, GENEVE and GTPU tunnels. GRE tunnel is still using per tunnel output nodes which will be changed in a separate patch with other GRE enhencements. Change-Id: I4123c01c0d2ead814417a867adb8c8a407e4df55 Signed-off-by: John Lo <loj@cisco.com>
2017-10-31Fix set interface mac address API to be endian neutralJohn Lo1-1/+1
Store and pass MAC address as 6 byte u8 array instead of u64 to make MAC address handling in set interface MAC endian neutral. The previous API handler only works for little endian. Change-Id: Ie4ec33a840bc5122ab1f17e25977e58f3466253b Signed-off-by: John Lo <loj@cisco.com>
2017-10-29devices: Add binary API for set interface <interface> rx-modeSteven1-0/+8
Also add vat test code to test the subject API. The format is sw_interface_set_rx_mode sw_if_index <index> [queue <id>] <polling|nterrupt|adaptive> Change-Id: Ib810d85d430077865bead8cc08a070f8ae478225 Signed-off-by: Steven <sluong@cisco.com>
2017-08-01P2P EthernetPavel Kotucek1-1/+2
Change-Id: Idb97e573961b3bc2acdeef77582314590795f8c3 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-07-12Deprecate support for flattened output nodesDamjan Marion1-2/+1
Change-Id: Id117e219146d9994340fb38c00233ea67db8929b Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-02Add interface rx mode commands, unify rx mode and placement CLIDamjan Marion1-0/+1
Change-Id: Ib506c3e9d66170f29e3266ad6dc4d32b829befba Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-07CLI: hide deleted interfacesEyal Bari1-0/+20
Added a new interface flag - HIDDEN Indicates that the interface does not appear in CLI/API. Added three new interface functions: vnet_sw_interface_is_api_visible - indicates if the sw_if_index should be displayed vnet_swif_is_api_visible - variant for sw_interface vnet_sw_interface_is_api_valid - tests if the given if_index exists and is visible for future use by api functions Changed the unformat function to only accept visible interfaces Changed vxlan to add the HIDDEN flag to deleted interfaces This is the first part in a series to hide deleted interfaces from the API Change-Id: Ib43cc5cf1c450856560faf4e84126eb3671038e2 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-01-10IPv6 NS RS tests and fixesNeale Ranns1-0/+8
includes Fix for VPP-584 with API change to remove prefix length from LL programming Change-Id: If860751c35e60255fb977f73bc33e8c2649e728e Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+318
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>