Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: refactor
Change-Id: I5235bf3e9aff58af6ba2c14e8c6529c4fc9ec86c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
format vlib_buffer_t::flags into interface output trace
Type: fix
Signed-off-by: luoyaozu <luoyaozu@foxmail.com>
Change-Id: Icb48a6d3a7ebdff7a3d42efe62723b0f0f1ea507
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I9f3d1a8574b15f09a458baad98c815e087fd60b8
|
|
Special bitmaps with VLIB_FRAME_SIZE bits.
Type: improvement
Change-Id: I48747e422e519e7b5e930fa720397459d3adbb8e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Make it shorter to type, easier to debug, make adding callbacks in
future simpler.
Type: improvement
Change-Id: I6cdd6375e36da23bd452a7c7273ff42789e94433
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Change-Id: I231f782b3c56dc2b10321e4569ac7acdad1c11da
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Change-Id: I7c341dc4a99898dd1f865ac2ebd99de9898bb0bd
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Change-Id: Ib9e8abdbf745ad6563fc79c9ebb6b2ea65917d08
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I4f29e6118630146876b7f58f1afe6b6733401047
|
|
We should compute offloads in interface_ouput.c
in the case when any of the UDP, TCP or IP
offload flags is not present in the interface
capabilities.
e.g. if the interface supports IP cksum offload
but not tcp/udp we should still compute cksums
here.
Type: fix
Change-Id: Ibaa3a56dbc92938dca45311c38f079d040052194
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
When a packet goes through interface-output, whether it should be
captured or not will be evaluated twice: in interface-output and in
interface-output-template (<interface_name>-out) node.
interface-output should only capture packets if there is an interface
filter, otherwise it should defer evaluation to
interface-output-template.
Type: fix
Change-Id: Ia720c5d184a236335e1d7d44d8c04caf87af5630
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
Change-Id: I2dd9a18497992ac7e2686c14f5d17eccccda0cda
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I415b2f980de10ca3154d2c8677c24792453eccd0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The per-protocol offload flags only make sense if F_OFFLOAD is set on
the vlib buffer main flags.
vnet_calc_checksums_inline is called from many places which should do
this check and don't, moving the check to this function is less error
prone and shouldn't have an impact on performance since the function
is always_inline.
Type: fix
Change-Id: I0297f109f31e409f07bfbaea3cd8b90c659658c4
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
- rename node to more meaningful name
- introduce lookup tables
- enable multiarch
- quad-loop node
- enqqueue to next instead of enqueueing to node
Type: improvement
Change-Id: Ibb208047ae04bb6cfe56db558d3b8938bc14b4fe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: Ic32550ee9c5d76d232d8b67a7810611f6c8b9177
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: Ia7652fe8e8c20f4f7a019ab7ca0649c2180c7e90
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: If3b44682e5bbf68b83adc12fb6c71899aecf8a98
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I58a7d75da2db0ec84c7c1f08fd1ca7a72946f14d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I46459a0c0a79677092aa9f8c92b67c0d06f7242e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
This patch adds flags to represent the modern NICs capabilities.
Change-Id: I96d38d9ab7eac55974d72795cd100d8337168e1e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I77723dcbf753c2a7f1ec00f034d8ab604f12214b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
It naturally belogns there...
Type: refactor
Change-Id: I05f7ba01103a5e9b3756f1ea69c8cc5d8f26f0a0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
This patch refactors the offload flags in vlib_buffer_t.
There are two main reasons behind this refactoring.
First, offload flags are insufficient to represent outer
and inner headers offloads. Second, room for these flags
in first cacheline of vlib_buffer_t is also limited.
This patch introduces a generic offload flag in first
cacheline. And detailed offload flags in 2nd cacheline
of the structure for performance optimization.
Change-Id: Icc363a142fb9208ec7113ab5bbfc8230181f6004
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
This reverts commit 5a48b3b9d88fa2793793e2bf3db8bf156fe2951f.
Change-Id: Ifa91b18bdbbc32bb729abc09d95637d9cdf42c3b
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Propagate the multi-arch variant selection to interfaces.
Type: fix
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Change-Id: I99c4a7896f172f0d14d2ded22a27383825529a7d
|
|
Type: improvement
Change-Id: Ia4ce47c0f727cf7b02294f05b94f14e788f52f30
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
When using classifier to filter traces, not all packets will be traced.
In that case, we should only count traced packets.
Type: fix
Change-Id: I87d1e217b580ebff8c6ade7860eb43950420ae78
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id13f33843b230a1d169560742c4f7b2dc17d8718
|
|
This adds a new data model for counters.
Specifying the errors severity and unit.
A later patch will update vpp_get_stats to take advantage of this.
Only the map plugin is updates as an example.
New .api language:
A new "counters" keyword to define counter sets.
counters map {
none {
severity info;
type counter64;
units "packets";
description "valid MAP packets";
};
bad_protocol {
severity error;
type counter64;
units "packets";
description "bad protocol";
};
};
Each counter has 4 keywords. severity, which is one of error, info or warn.
A type, which is one of counter64 or gauge64.
units, which is a text field using units from YANG.
paths {
"/err/ip4-map" "map";
"/err/ip6-map" "map";
"/err/ip4-t-map" "map";
"/err/ip6-t-map" "map";
};
A new paths keyword that maps the counter-set to a path in the stats segment KV store.
Updated VPP CLI to include severity so user can see error counter severity.
DBGvpp# show errors
Count Node Reason Severity
13 ethernet-input no error error
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ib2177543f49d4c3aef4d7fa72476cff2068f7771
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Provide a minimal trace [ip4/ip6 src/dst address] for dropped pkts
when the user specifies "trace add error-drop XXXX", but does not
trace pkts from the original input node.
This is a wireshark dissector problem. Packets thrown at error-drop
may be well-formed, or not. VPP must not crash, no matter what.
The minimal trace capture and decode could be enhanced. Anyone
interested in doing that must consider all of the corner-cases
involved. This version should be at least somewhat useful.
Note that "pcap trace drop ..." - and the packet generator - seem like
the right tools to use when researching more complex issues.
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I961ca133980ffa2a1e5707879a443b21442ed894
|
|
VXLAN uses csum_offload for IPv6 packets.
But without gso node we have csum calculated only for inner
packet.
This patch adds support for outer header csum calculation.
Checksum for inner packet should be calculated before
interface-output node (for example in vxlan node).
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: Ica68429ede4426293769207cd83c791ebe72fe56
|
|
Type: fix
In quad loop, checksum will be calculated for all four packets,
if one packet needs checksum computation, without respecting their
respective flags. This patch fixes it.
Change-Id: I479b420ba0dcbd178ea4180bf05a0e55a6b13843
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Merge two mildly incompatible static inlines, and rename the results
vnet_calc_checksums_inline (...).
The resulting inline has three additional parameters: int is_ip4, int
is_ip6, and int with_gso. All calls manage to pass one or more as
compile-time constants, which causes a certain amount of code to
disappear in each instantiation.
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I1a2a0e353b9a7bca20bc81318e8c915617261e1a
|
|
For ip4 tcp, ip6 tcp, and ip6 udp packet, we set checksum = 0 prior to
computing the checksum. We missed ip4 udp case. This oversight requires all
clients to set udp->checksum = 0 if ip4 udp checksum offload is needed.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ic608811e82099f3bec469e123671e9b281f38d76
|
|
Type: feature
Change-Id: I7c6be2b96d19f82be237f6159944f3164ea512d0
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Finish the feature, and fix a couple of doc bugs
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2c62745fda137776204c8fc4fca0e7e288051573
|
|
Type: refactor
Change-Id: Ib4a8e7e64093b2db1deda6663325080bc8337605
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I79b216d2499df143f53977e5b70382f6f887e0bc
|
|
Append <nodename>: <error-string> to pcap drop traces.
The data displays perfectly fine in [vanilla] wireshark, and makes it
100% obvious which node dropped the packet, and why.
Type: feature
Ticket: VPP-1776
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I9b964b99da4011b93723354db6ef0b128fca20cb
|
|
Use a single vnet_pcap_t in vlib_global_main, specifically to support
unified tracing
Update sphinx docs, doxygen tags
Type: refactor
Ticket: VPP-1776
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Id15d41a596712968c0714cef1bd2cd5bc9cbdd55
|
|
The 9af7e2e87e used a comparison that fd is >= 0 to check that
the pcap needs closing. While the pcap_close() function does
reset the file descriptor to -1, the freshly initialized structure
has it equal to 0.
This causes the VPP to close stdin if the packets are being seen
on pg interface without the capture file being opened.
This triggers the vpp attempting to read from STDIN
(another bug), which results in running out of memory.
Change-Id: I11d61422701500a9b3e0dd52d59383f297d57f54
Type: fix
Fixes: 9af7e2e87e
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
See .../src/vnet/classify/trace_classify.h for the business end
of the scheme.
It would be best to hash pkts, prefetch buckets, and do the primary
table lookups two at a time. The inline as given works, but perf
tuning will be required. "At least it works..."
Add "classify filter" debug cli, for example:
classify filter mask l3 ip4 src dst \
match l3 ip4 dst 192.168.2.10 src 192.168.1.10
Add "pcap rx | tx trace ... filter" to use the current classify filter chain
Patch includes sphinx documentation and doxygen tags.
Next step: device-driver integration
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I05b1358a769f61e6d32470e0c87058f640486b26
|
|
Type: fix
Change-Id: If3c4e5c376b51a26143d8922dcacfbda534163bd
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Credits to ray.kinsella@intel.com who spotted the issue and identified
root cause.
Type: fix
Change-Id: I4afe74c47769484309f6aebca2de56ad32c8041f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
dpdk bonding code was removed in 19.08. However, there are still references
to VNET_SW_INTERFACE_FLAG_BOND_SLAVE which was set by the already removed
code.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I949a7281e6273f2733dd7532cc4a3bb4f3ce30de
|
|
Type: fix
Ticket: VPP-1751
Change-Id: I5ffb078492adc97374290de404f2ec0102b75184
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
when use pcap cli to capture pcakets into two files rx01.pcap && rx02.pcap,
the first time:
1)pcap rx trace on max 100 intfc any file rx01.pcap
2)......the process of capture data to buffer......
3)pcap rx trace off
the second time:
4)pcap rx trace on max 100 intfc any file rx02.pcap
5)......the process of capture data to buffer......
6)pcap rx trace off
the pcap_write function bug in this two lines
pm->n_packets_captured = 0;
if (pm->n_packets_captured >= pm->n_packets_to_capture) referring to calling pcap_close()
will result in that the twice pcap cli both writes the packets
into rx01.pcap, but nothing into rx02.pcap. Beside, the rx02.pcap
file will not be created.
solution: separate the pcap_close() out of pcap_write()
Change-Id: Iedeb46f9cf0a4cb12449fd75a4014f95f3bb3fa8
Signed-off-by: Jack Xu <jack.c.xu@ericsson.com>
|
|
Type: fix
Ticket: VPP-1740
Change-Id: If3e34b5b8260e4c50af338895066c2c96f4603af
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type:fix
Fixes:4208a4c
Change-Id: I7077788cd14f539b06ead5dc65d8411940438bae
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|