aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/ip/ip.api
AgeCommit message (Collapse)AuthorFilesLines
2021-09-22ip: add ip_table_allocate to apiAloys Augustin1-1/+30
Set tableID = ~0 for auto selection unused ID https://jira.fd.io/browse/VPP-1993 Type: improvement Change-Id: I4eec2cc1d18fc025196cb6ac4c9a4b374388eb56 Signed-off-by: Artem Glazychev <artem.glazychev@xored.com> Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2021-08-13ip: punt redirect add nh in apiNathan Skrzypczak1-0/+43
Type: feature Change-Id: Ia970f444ba2f38b7a42ea94942c906f1b541511b Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-03-16fib: Allow the creation of new source on the APINeale Ranns1-1/+61
Type: feature an client can dump the existing sources, examine their priorities, then define thier own source. Usefull if a client wants to distingusih between say, static, ospf, bgp, etc routes it has added over the API. Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I5158b4fa1ebe87381ff8707bb173217f56ea274a
2021-02-15ip: Path MTUNeale Ranns1-0/+57
Type: feature Support setting the MTU for a peer on an interface. The minimum value of the path and interface MTU is used at forwarding time. the path MTU is specified for a given peer, by address and table-ID. In the forwarding plane the MTU is enfored either: 1 - if the peer is attached, then the MTU is set on the peer's adjacency 2 - if the peer is not attached, it is remote, then a DPO is added to the peer's FIB entry to perform the necessary fragmentation. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
2021-01-28ip: Router ID included in flow hashNeale Ranns1-1/+15
Type: feature A device/router needs to have a unique ID which is included in the flow has so that flows are not polarised through the network, i.e. each deice in the network chooses the same nth link for the same flow. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I963e03674adbb085902b4084fdc4886b88f5734c
2021-01-21ip: use IPv6 flowlabel in flow hash computationAhmed Abdelsalam1-0/+33
extends ip6_compute_flow_hash() to include IPv6 flowlabel in flowhash computation Type: improvement Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com> Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Id1aaa20c9dac729c22b714eea1cdd6e9e4d1f75e
2021-01-20ip: add API to retrieve IPv6 link-layer addressBenoît Ganne1-1/+24
Type: feature Change-Id: I5739869490155b0b9674b4faf61882d97e66a4ed Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-11-25api: vat2 and json autogeneration for api messagesOle Troan1-3/+3
VAT2: A completely auto-generated replacement of VAT. Reads input message in JSON from stdin and outputs received messages in JSON. A VAT2 plugin is automatically built for a .api file. There no longer a need for a separate _test.c. Example: vat2 show_version {} { "_msgname": "show_version_reply", "retval": 0, "program": "vpe", "version": "21.01-rc0~411-gf6eb348a6", "build_date": "2020-11-19T09:49:25", "build_directory": "/vpp/autogen3" } vat2 sw_interface_dump '{"sw_if_index": -1, "name_filter_valid": 0, "name_filter": ""}' [{ "_msgname": "sw_interface_details", "sw_if_index": 0, "sup_sw_if_index": 0, "l2_address": "00:00:00:00:00:00", "flags": "Invalid ENUM", "type": "IF_API_TYPE_HARDWARE", "link_duplex": "LINK_DUPLEX_API_UNKNOWN", "link_speed": 0, "link_mtu": 0, "mtu": [0, 0, 0, 0], "sub_id": 0, "sub_number_of_tags": 0, "sub_outer_vlan_id": 0, "sub_inner_vlan_id": 0, "sub_if_flags": "Invalid ENUM", "vtr_op": 0, "vtr_push_dot1q": 0, "vtr_tag1": 0, "vtr_tag2": 0, "outer_tag": 0, "b_dmac": "00:00:00:00:00:00", "b_smac": "00:00:00:00:00:00", "b_vlanid": 0, "i_sid": 0, "interface_name": "local0", "interface_dev_type": "local", "tag": "" }] This is the first phase and vat2 is not integrated in packaging yet. Type: feature Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ib45ddeafb180ea7da8c5dc274a9274d7a4edc876 Signed-off-by: Ole Troan <ot@cisco.com>
2020-10-21ip: convert u32 entry_flags to vl_api_mfib_entry_flags_t on mroute APINeale Ranns1-1/+1
Type: fix This is not an API change, it's the same values, just a different named type. also use VppEnum values in tests Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I3a18b529514f3cc9467ae4e8ac3e88d067fc776b
2020-05-05api: ip: add IP_ROUTE_LOOKUP APIChristian Hopps1-0/+26
Add an IP_ROUTE_LOOKUP function that does either an exact match or longest prefix match in a given fib table for a given prefix returning the match if present. Add API test. Type: improvement Signed-off-by: Christian Hopps <chopps@labn.net> Change-ID: I67ec5a61079f4acf1349a9c646185f91f5f11806
2020-04-28tests: move defaults from defaultmapping to .api filesPaul Vinciguerra1-9/+9
facilitates use of papi beyond the tests. Type: improvement Change-Id: I3d502d9130b81a7fb65ee69bb06fe55802b28a27 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-04-14urpf: Unicast reverse Path Forwarding (plugin)Neale Ranns1-16/+0
Type: feature - move the IP4 code to plugin - add ip6 support - add suport for uRPF on TX - add tests Change-Id: I074c2debc486d3e79c12fad4b8dbd72c41e841a0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-01-03ip: API cleanupJakub Grajciar1-25/+26
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I17b95bba2327049d2b99e59cea79208814a24b22 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-12-17ip: Protocol Independent IP NeighborsNeale Ranns1-491/+4
Type: feature - ip-neighbour: generic neighbour handling; APIs, DBs, event handling, aging - arp: ARP protocol implementation - ip6-nd; IPv6 neighbor discovery implementation; separate ND, MLD, RA - ip6-link; manage link-local addresses - l2-arp-term; events separated from IP neighbours, since they are not the same. vnet retains just enough education to perform ND/ARP packet construction. arp and ip6-nd to be moved to plugins soon. Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-10ip: use explicit types in apiOle Troan1-73/+74
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I1fd190da28a765ba430952539c291a741aaa3dce
2019-11-26fib: Table ReplaceNeale Ranns1-14/+53
Type: feature from the API doc, a table replace is: " The use-case is that, for some unspecified reason, the control plane has a very different set of entries it wants in the table than VPP currently has. The CP would thus like to 'replace' VPP's current table only by specifying what the new set of entries shall be, i.e. it is not going to delete anything that already eixts. the CP delcartes the start of this procedure with this begin_replace API Call, and when it has populated all the entries it wants, it calls the below end_replace API. From this point on it is of coursce free to add and delete entries as usual. The underlying mechanism by which VPP implements this replace is purposefully left unspecified. " In the FIB, the algorithm is implemented using mark and sweep. Algorithm goes: 1) replace_begin: this marks all the entries in that table as 'stale' 2) download all the entries that should be in this table - this clears the stale flag on those entries 3) signal the table converged: ip_table_replace_end - this removes all entries that are still stale this procedure can be used when an agent first connects to VPP, as an alternative to dump and diff state reconciliation. Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-09-26ip: add shallow virtual reassembly functionalityKlement Sekera1-0/+9
Type: feature Change-Id: Ibc8334e26c7e6f6120696c3e313b6e11d73dab99 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-09-19api: split vl_api_prefix into twoOle Troan1-2/+2
One type for address with prefix and one type for prefix. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Icfec51d9b7d5cde1d69fbecdd97498688ab7b295 Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Klement Sekera <ksekera@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2019-08-20vppapigen: remove support for legacy typedefsPaul Vinciguerra1-5/+5
vppapigen has remapped legacy to typedefs behind the scenes for some time now. - update .api files to use new style typedefs. - issue error on 'typeonly define' in .api files - remove unneeded macros redefining vl_noop_handler Type: refactor Change-Id: I7a8c4a6dafacee6a131f95cd0e9b03a8c60dea8b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-18fib: fib api updatesNeale Ranns1-172/+109
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-20reassembly: prevent long chain attackKlement Sekera1-1/+3
limit max # of fragments to 3 per packet by default add API option to configure the limit at runtime Change-Id: Ie4b9507bf5c6095b9a5925972b37fe0032f4f9e8 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-03-07API: Add python2.7 support for enum flags via aenumOle Troan1-1/+0
Change-Id: I77a43bfb37d827727c331cd65eee77536cc15953 Signed-off-by: Ole Troan <ot@cisco.com>
2019-01-30Use IP and MAC API types for neighborsNeale Ranns1-84/+78
use address_t and mac_address_t for IPv6 and ARP entries and all other API calls in ip.api aprat from the route ones, that will follow in a separate commit Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-07VOM: mroutesNeale Ranns1-2/+8
- fixes in ip.api for dumping mroute path flags Change-Id: I13b0cfb15d374250ed71bd4e13dda9b798c18204 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-29api: ip_source_check_interface_add_del api is added.Chore1-0/+16
Change-Id: I4799a9d469c797e54669ff4b50851a9acc849427 Signed-off-by: Chore <s3m2e1.6star@gmail.com>
2018-11-29VPP-1507: Added binary api to dump configured ip_punt_redirectPavel Kotucek1-10/+31
Change-Id: I790f7785e183cc9aaffd5b593617c4e12a32e20d Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>
2018-11-26flow-hash: Add symmetric flag for flow hashingMohsin Kazmi1-1/+3
When 'Symmetric' flag is enabled, it will sort the addresses and hence, same flow hash will be calculated on both directions. Change-Id: I5d846f8d0b94ca1121e03d15b02bb56edb5887b1 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-11-17IP-punt: add documentation to the API and fix IP address initNeale Ranns1-0/+2
Change-Id: I0bdff4dbfd81d67e82211ce9fdc97209a1b23c66 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-12IPv6: Make link-local configurable per-interface (VPP-1446)Juraj Sloboda1-14/+0
Remove old nonfunctional code for setting link-local addresses. Use common API for setting all IPv6 addresses. Change-Id: I562329df86341f81ef2441510a9eefbbf710f6e0 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com> Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-10-12ip: add container proxy dump API (VPP-1364)Matus Fabian1-0/+13
Change-Id: I3cb89dbfb7174b9913a8c4ad9b3b1dc9f6ed6326 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-10-05Improve ip_mroute_add_del documentationIan Wells1-4/+24
Change-Id: Ieb882cc67c37bf591b6c737234263c7c35416e6d Signed-Off-By: Ian Wells <iawells@cisco.com>
2018-10-01Add adjacency counters to the stats segmentNeale Ranns1-1/+11
Change-Id: I6b59df939c9daf40e261d73d19f500bd90abe6ff Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-10-01mroute routers in the stats segmentNeale Ranns1-1/+9
Change-Id: I798e4fb6470ae9e763f8de1c290ff0fc3c0b7f9e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-20Route counters in the stats segmentNeale Ranns1-2/+12
route ADD API changed to return the stats segment index to use to read the counters Change-Id: I2ef41e01eaa2f9cfaa49d9c88968897793825925 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-31Introduce a mac_address_t on the API and in VPPNeale Ranns1-0/+1
Change-Id: I05d6c2cb5d34de469eb050e4ee10dc6b954c986d Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-08-15Remove client_index field from replies in APIOndrej Fabry1-5/+0
- replies should not need to contain client_index since it is used to identify sender of requests to VPP Change-Id: Iece3853b3f020054ee1652b149d0cf8d9580db4e Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
2018-08-14Fix context field position in API definitionOndrej Fabry1-1/+1
- context should be first field for reply messages, just like it is for all other 545 replies Change-Id: Ib291036d3389dbc26c8e9194966d01cab81534aa Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
2018-07-09IGMP improvementsNeale Ranns1-0/+1
- Enable/Disable an interface for IGMP - improve logging - refactor common code - no orphaned timers - IGMP state changes in main thread only - Large groups split over multiple state-change reports - SSM range configuration API. - more tests Change-Id: If5674f1044e7e97274a711f47807c9ba689d7b9a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-27proxy_arp: remove unused is_addMarek Gradzki1-2/+1
Change-Id: I1773d962b373693a737d39c0c97e8c53eb91545a Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2018-05-25ARP proxy dumpsNeale Ranns1-7/+50
Change-Id: I8335ebf266becf2f42bb3f28a17dfed8d9b08f97 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-18IP unnumbered dumpNeale Ranns1-1/+23
Change-Id: I4f245fd225bcc563fafee2696cd039477d661c57 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-05-11Periodic scan and probe of IP neighbors to maintain neighbor poolsJohn Lo1-1/+25
Scan IPv4 and IPv6 neigbor pool entries once a minute to keep them up to date. The neighbor of an entry is probed if its time-stamp is older than 1 minute. If the neighbor respond, its time-stamp will be updated. If there is no response from a neighbor, its entry will be deleted when the time-stamp of the entry become more than 4 minutes old. Static neighbor entries are not probed nor deleted. Implemented CLI and API to enable and disable priodic scan of IPv4, IPv6 or both types of IP neighbors. CLI is "ip scan-neighbor" and API is "ip_scan_neighbor_enable_disable". Other IP neighbor scan parameters can also be changed from their defaults via the CLI/API. Change-Id: Id1a0a934ace15d03db845aa698bcbb9cdabebfcd Signed-off-by: John Lo <loj@cisco.com>
2018-04-17IP mcast: allow unicast address as a next-hopNeale Ranns1-0/+1
Change-Id: I5e679f2601e37688f2768620479dc2efb7d19ca3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-16Implement ip_probe_neighbor APIJohn Lo1-9/+32
Add API support similar to VPP CLI "ip probe-neighbor" except API call is asynch and will not wait, as the CLI does, for address resolution of probed neighbor. The API client can use the APIs want_ip4_arp_events or want_ip6_nd_events to get notified of the desired address resolution event. Change-Id: Ieab58abe75b5cc7f5185b3b91418b6362f8992d3 Signed-off-by: John Lo <loj@cisco.com>
2018-03-21reassembly: feature/concurrencyKlement Sekera1-0/+16
This change makes ip reassembly an interface feature, while adding concurrency support. Due to this, punt is no longer needed to test reassembly. Change-Id: I467669514ec33283ce935be0f1dd08f07684f0c7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-16IPv6 ND Router discovery data plane (VPP-1095)Juraj Sloboda1-1/+87
Add API call to send Router Solicitation messages. Save info from incoming Router Advertisement messages and notify listeners. Change-Id: Ie518b5492231e03291bd4c4280be4727bfecab46 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-03-09MPLS Unifom modeNeale Ranns1-29/+3
- support both pipe and uniform modes for all MPLS LSP - all API programming for output-labels requires that the mode (and associated data) is specificed - API changes in MPLS, BIER and IP are involved - new DPO [sub] types for MPLS labels to handle the two modes. Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-06API: Add service definitions for events and singleton messages (second attempt)Marek Gradzki1-0/+10
Based on https://gerrit.fd.io/r/#/c/10920/ Updates service definition in stats.api with correct reply message names. Change-Id: I3282bee5304e667e23bc1fab3f43d967a50d880d Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2018-03-05Revert "API: Add service definitions for events and singleton messages."Ole Trøan1-10/+0
This reverts commit f7b7fa53b7eaec81d8c00c1023fb7d01f1f9761f. Change-Id: I87496342943248e94f01ada31459f387c0a3a610 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-05API: Add service definitions for events and singleton messages.Ole Troan1-0/+10
Change-Id: I7de987c30b263d43521e6280c5273f30b5f6e11c Signed-off-by: Ole Troan <ot@cisco.com>