summaryrefslogtreecommitdiffstats
path: root/src/vnet/ip/ip.api
AgeCommit message (Collapse)AuthorFilesLines
2019-09-12api: split vl_api_prefix into twoOle Troan1-2/+2
One type for address with prefix and one type for prefix. Ticket: VPP-1769 Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Icfec51d9b7d5cde1d69fbecdd97498688ab7b295 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns1-172/+109
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-20reassembly: prevent long chain attackKlement Sekera1-1/+3
limit max # of fragments to 3 per packet by default add API option to configure the limit at runtime Change-Id: Ie4b9507bf5c6095b9a5925972b37fe0032f4f9e8 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-03-07API: Add python2.7 support for enum flags via aenumOle Troan1-1/+0
Change-Id: I77a43bfb37d827727c331cd65eee77536cc15953 Signed-off-by: Ole Troan <ot@cisco.com>
2019-01-30Use IP and MAC API types for neighborsNeale Ranns1-84/+78
use address_t and mac_address_t for IPv6 and ARP entries and all other API calls in ip.api aprat from the route ones, that will follow in a separate commit Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-07VOM: mroutesNeale Ranns1-2/+8
- fixes in ip.api for dumping mroute path flags Change-Id: I13b0cfb15d374250ed71bd4e13dda9b798c18204 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-29api: ip_source_check_interface_add_del api is added.Chore1-0/+16
Change-Id: I4799a9d469c797e54669ff4b50851a9acc849427 Signed-off-by: Chore <s3m2e1.6star@gmail.com>
2018-11-29VPP-1507: Added binary api to dump configured ip_punt_redirectPavel Kotucek1-10/+31
Change-Id: I790f7785e183cc9aaffd5b593617c4e12a32e20d Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>
2018-11-26flow-hash: Add symmetric flag for flow hashingMohsin Kazmi1-1/+3
When 'Symmetric' flag is enabled, it will sort the addresses and hence, same flow hash will be calculated on both directions. Change-Id: I5d846f8d0b94ca1121e03d15b02bb56edb5887b1 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-11-17IP-punt: add documentation to the API and fix IP address initNeale Ranns1-0/+2
Change-Id: I0bdff4dbfd81d67e82211ce9fdc97209a1b23c66 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-12IPv6: Make link-local configurable per-interface (VPP-1446)Juraj Sloboda1-14/+0
Remove old nonfunctional code for setting link-local addresses. Use common API for setting all IPv6 addresses. Change-Id: I562329df86341f81ef2441510a9eefbbf710f6e0 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com> Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-10-12ip: add container proxy dump API (VPP-1364)Matus Fabian1-0/+13
Change-Id: I3cb89dbfb7174b9913a8c4ad9b3b1dc9f6ed6326 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-10-05Improve ip_mroute_add_del documentationIan Wells1-4/+24
Change-Id: Ieb882cc67c37bf591b6c737234263c7c35416e6d Signed-Off-By: Ian Wells <iawells@cisco.com>
2018-10-01Add adjacency counters to the stats segmentNeale Ranns1-1/+11
Change-Id: I6b59df939c9daf40e261d73d19f500bd90abe6ff Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-10-01mroute routers in the stats segmentNeale Ranns1-1/+9
Change-Id: I798e4fb6470ae9e763f8de1c290ff0fc3c0b7f9e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-20Route counters in the stats segmentNeale Ranns1-2/+12
route ADD API changed to return the stats segment index to use to read the counters Change-Id: I2ef41e01eaa2f9cfaa49d9c88968897793825925 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-31Introduce a mac_address_t on the API and in VPPNeale Ranns1-0/+1
Change-Id: I05d6c2cb5d34de469eb050e4ee10dc6b954c986d Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-08-15Remove client_index field from replies in APIOndrej Fabry1-5/+0
- replies should not need to contain client_index since it is used to identify sender of requests to VPP Change-Id: Iece3853b3f020054ee1652b149d0cf8d9580db4e Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
2018-08-14Fix context field position in API definitionOndrej Fabry1-1/+1
- context should be first field for reply messages, just like it is for all other 545 replies Change-Id: Ib291036d3389dbc26c8e9194966d01cab81534aa Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
2018-07-09IGMP improvementsNeale Ranns1-0/+1
- Enable/Disable an interface for IGMP - improve logging - refactor common code - no orphaned timers - IGMP state changes in main thread only - Large groups split over multiple state-change reports - SSM range configuration API. - more tests Change-Id: If5674f1044e7e97274a711f47807c9ba689d7b9a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-27proxy_arp: remove unused is_addMarek Gradzki1-2/+1
Change-Id: I1773d962b373693a737d39c0c97e8c53eb91545a Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2018-05-25ARP proxy dumpsNeale Ranns1-7/+50
Change-Id: I8335ebf266becf2f42bb3f28a17dfed8d9b08f97 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-18IP unnumbered dumpNeale Ranns1-1/+23
Change-Id: I4f245fd225bcc563fafee2696cd039477d661c57 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-05-11Periodic scan and probe of IP neighbors to maintain neighbor poolsJohn Lo1-1/+25
Scan IPv4 and IPv6 neigbor pool entries once a minute to keep them up to date. The neighbor of an entry is probed if its time-stamp is older than 1 minute. If the neighbor respond, its time-stamp will be updated. If there is no response from a neighbor, its entry will be deleted when the time-stamp of the entry become more than 4 minutes old. Static neighbor entries are not probed nor deleted. Implemented CLI and API to enable and disable priodic scan of IPv4, IPv6 or both types of IP neighbors. CLI is "ip scan-neighbor" and API is "ip_scan_neighbor_enable_disable". Other IP neighbor scan parameters can also be changed from their defaults via the CLI/API. Change-Id: Id1a0a934ace15d03db845aa698bcbb9cdabebfcd Signed-off-by: John Lo <loj@cisco.com>
2018-04-17IP mcast: allow unicast address as a next-hopNeale Ranns1-0/+1
Change-Id: I5e679f2601e37688f2768620479dc2efb7d19ca3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-16Implement ip_probe_neighbor APIJohn Lo1-9/+32
Add API support similar to VPP CLI "ip probe-neighbor" except API call is asynch and will not wait, as the CLI does, for address resolution of probed neighbor. The API client can use the APIs want_ip4_arp_events or want_ip6_nd_events to get notified of the desired address resolution event. Change-Id: Ieab58abe75b5cc7f5185b3b91418b6362f8992d3 Signed-off-by: John Lo <loj@cisco.com>
2018-03-21reassembly: feature/concurrencyKlement Sekera1-0/+16
This change makes ip reassembly an interface feature, while adding concurrency support. Due to this, punt is no longer needed to test reassembly. Change-Id: I467669514ec33283ce935be0f1dd08f07684f0c7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-16IPv6 ND Router discovery data plane (VPP-1095)Juraj Sloboda1-1/+87
Add API call to send Router Solicitation messages. Save info from incoming Router Advertisement messages and notify listeners. Change-Id: Ie518b5492231e03291bd4c4280be4727bfecab46 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-03-09MPLS Unifom modeNeale Ranns1-29/+3
- support both pipe and uniform modes for all MPLS LSP - all API programming for output-labels requires that the mode (and associated data) is specificed - API changes in MPLS, BIER and IP are involved - new DPO [sub] types for MPLS labels to handle the two modes. Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-06API: Add service definitions for events and singleton messages (second attempt)Marek Gradzki1-0/+10
Based on https://gerrit.fd.io/r/#/c/10920/ Updates service definition in stats.api with correct reply message names. Change-Id: I3282bee5304e667e23bc1fab3f43d967a50d880d Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2018-03-05Revert "API: Add service definitions for events and singleton messages."Ole Trøan1-10/+0
This reverts commit f7b7fa53b7eaec81d8c00c1023fb7d01f1f9761f. Change-Id: I87496342943248e94f01ada31459f387c0a3a610 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-05API: Add service definitions for events and singleton messages.Ole Troan1-0/+10
Change-Id: I7de987c30b263d43521e6280c5273f30b5f6e11c Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-01IPv4/6 reassemblyKlement Sekera1-0/+28
Change-Id: Ic5dcadd13c88b8a5e7896dab82404509c081614a Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-01-23VPPAPIGEN: vppapigen replacement in Python PLY.Ole Troan1-1/+1
This is a version of the VPP API generator in Python PLY. It supports the existing language, and has a plugin architecture for generators. Currently C and JSON are supported. Changes: - vl_api_version to option version = "major.minor.patch" - enum support - Added error checking and reporting - import support (removed the C pre-processor) - services (tying request/reply together) Version: option version = "1.0.0"; Enum: enum colours { RED, BLUE = 50, }; define foo { vl_api_colours_t colours; }; Services: service { rpc foo returns foo_reply; rpc foo_dump returns stream foo_details; rpc want_stats returns want_stats_reply events ip4_counters, ip6_counters; }; Future planned features: - unions - bool, text - array support (including length) - proto3 output plugin - Refactor C/C++ generator as a plugin - Refactor Java generator as a plugin Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf Signed-off-by: Ole Troan <ot@cisco.com>
2018-01-09DVR: run L3 output featuresNeale Ranns1-1/+2
- rename l2_bridged to is_dvr. Including on the ip.api this was new in the 18.01 release so no compatability issues. - steal the free space in vnet_buffer_opaque_t for use with flags. - run the ipX-output feature arc from the DVR DPO Change-Id: I040e5976d1dbe076fcdda3a40a7804f56337ce3f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-08Remove the unused 'create VRF if needed' API parametersNeale Ranns1-3/+0
Change-Id: I35e166feeb0ac1e0e570efe07cb5f4cbeb5b8670 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-11-10Break up vpe.apiNeale Ranns1-0/+206
- makes the VAPI generated file more consumable. - VOM build times improve. Change-Id: I838488930bd23a0d3818adfdffdbca3eead382df Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-11-10Add sw_if_index to the ip_neighbor_details_t response.Jon Loeliger1-1/+3
When a DUMP with sw_if_index == ~0 is used to get all Neighbor entries for all interfaces, it is unclear in the details to which interface the neighbor belongs. Clear that up by returning the associated sw_if_index as well. Change-Id: Ib584a57138f7faceffed64d7c1854f7af92e0e42 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-11-09BIERNeale Ranns1-2/+5
- see draft-ietf-bier-mpls-encapsulation-10 - midpoint, head and tail functions - supported payload protocols; IPv4 and IPv6 only. Change-Id: I59d7363bb6fdfdce8e4016a68a9c8f5a5e5791cb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-07UDP Encapsulation.Neale Ranns1-2/+10
A UDP-encap object that particiapates in the FIB graph and contributes DPO to teh output chain. It thereofre resembles a tunnel but without the interface. FIB paths (and henace routes) can then be created to egress through the UDP-encap. Said routes can have MPLS labels, hence this also allows MPLSoUPD. Encap is uni-directional. For decap, one still registers with the UDP port dispatcher. Change-Id: I23bd345523b20789a1de1b02022ea1148ca50797 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-07ip: add container proxy apiFlorin Coras1-0/+11
Change-Id: Id324a757517f85973097e20e2eb88d64ae0e931b Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-19Remove unused 'not_last' parameter from ip_add_del_routeMarek Gradzki1-3/+0
Vat supports setting value for the parameter, but 'not_last' is ignored by ip_add_del_route handler, so can be removed. This patch - updates ip.api, - removes vat handlers - updates vpp_papi_provider.py (also mpls_route_add_del with unused not_last) Change-Id: Ife15de123db4bc8247103a29b90bce1988e46534 Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2017-10-15Revert "Enforce FIB table creation before use"Florin Coras1-0/+3
This reverts commit f9342023c19887da656133e2688a90d70383b0c5. Reverting to unblock master. No idea why jjb +1ed this patch! On closer inspection it looks like it -1ed it and subsequently changed opinion. CSIT tests should be fixed before re-merging. Change-Id: I26608912a962c52083073e16c7c9d2cc44a3cc8d Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-14Source Lookup progammable via APINeale Ranns1-0/+4
Change-Id: I5d5d4f22b6369d504455a644f73076d772fbcfb4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-13Enforce FIB table creation before useNeale Ranns1-3/+0
last i the serise of the use of the FIB table create/delete API. VPP now forces the tables to have been explicitly creted before they are used. Change-Id: Ifde3b1bbb76697a01ab71bce4f5264e6d1725467 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-10punt and drop features:Neale Ranns1-0/+36
- new IPv4 and IPv6 feature arcs on the punt and drop nodes - new features: - redirect punted traffic to an interface and nexthop - police punted traffic. Change-Id: I53be8bf4e06545add8a3619e462de5ffedd0a95c Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-09vppapigen: support per-file (major,minor,patch) version stampsDave Barach1-0/+2
Add one of these statements to foo.api: vl_api_version 1.2.3 to generate a version tuple stanza in foo.api.h: /****** Version tuple *****/ vl_api_version_tuple(foo, 1, 2, 3) Change-Id: Ic514439e4677999daa8463a94f948f76b132ff15 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Ole Troan <ot@cisco.com>
2017-10-05Distributed Virtual Router SupportNeale Ranns1-0/+1
A distributed virtual router works by attmpeting to switch a packet, but on failing to find a local consumer (i.e. the packet is destined to a locally attached host) then the packet is sent unmodified 'upstream' to where the rest of the 'distributed' router is present. When L3 switching a packet this means the L2 header must not be modifed. This patch adds a 'l2-bridge' object to the L3 FIB which re-injects packets from the L3 path back into the L2 path - use with extreme caution. Change-Id: I069724eb45956647d7980cbe40a80a788ee6ee82 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-13Add a name to the creation of an IP and MPLS tableNeale Ranns1-3/+9
Change-Id: I4b4648831551519b2ffb6f93255d28a4b8726c22 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-14FIB table add/delete API onlyNeale Ranns1-0/+18
commit only the addition of the .api definition and their invocation through VAT so CSIT can use it Change-Id: Id510f14b1ce007fe5e92120507ea34100652fc64 Signed-off-by: Neale Ranns <nranns@cisco.com>