Age | Commit message (Collapse) | Author | Files | Lines |
|
VPP crash when trying to send arp message or to probe neighbor over
interface with IP address but without hw address (local0 and tunnels
- vxlan, gre, ...)
Change-Id: I08a1c97d3ea913fc11b2886cf73b2ccc31356664
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: Ib5ad1369678389534426902ce698bccf7a6d9ec2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I2cb6ce4e29813f6602b14e6e61713fb381fbcef8
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I123eccea98abafeb31f25d2a162501e2eded60d4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
To save space in the first cacheline following is changed:
- total_length_not_including_first_buffer moved to the 2nd cacheline.
This field is used only when VLIB_BUFFER_TOTAL_LENGTH_VALID and
VLIB_BUFFER_NEXT_PRESENT are both set.
- free_list_index is now stored in 4bits inside flags, which
allows up to 16 free lists. In case we need more we can store index
in the 2nd cachelin
Change-Id: Ic8521350819391af470d31d3fa1013e67ecb7681
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
after deleting a sub interface with IP4/IP6 address vpp crash
Change-Id: Ie768ca845b9e2394f61e2a8e9722a80a788746e7
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: Ib874ad93357500b2c425d75cf48834264b2183fc
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I7de6b96631d1645d0eadd38525860d84d78e316d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Id4fdf2abf3bae3b14cdc6489ca16d2007da78d07
Signed-off-by: flyingeagle23 <wang.hui56@zte.com.cn>
|
|
- the flow hash config is (and was) cached on the load-balance object so the fib_table_t struct is not used a switch time. Therefore changes to the table's flow hash config need to be propagated to all load-balances and hance all FIB entries in the table.
- enable API for setting the IPv6 table flow hash config
- use only the hash config in the fib_table_t object and not on the ipX_fib_t
- add tests.
Change-Id: Ib804c11162c6d4972c764957562c372f663e05d4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- only build them for popular path-lists (where popular means more than 64 children)
the reason to have a map is to improve convergence speed for recursive prefixes - if there are only a few this technique is not needed
- only build them when there is at least one path that has recursive constraints, i.e. a path that can 'fail' in a PIC scenario.
- Use the MAPS in the switch path.
- PIC test cases for functionality (not convergence performance)
Change-Id: I70705444c8469d22b07ae34be82cfb6a01358e10
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
tests). The DPO was incorrectly initialised with FIB_PROTO_MAX
Change-Id: I962df9e162e4dfb6837a5ce79ea795d5ff2d7315
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic16bc10d0b2877b2afdf052615f9334f31b9519f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
1 - interface-DPO
Used in the Data-plane to change a packet's input interface
2 - MPLS multicast FIB entry
Same as a unicast entry but it links to a replicate not a load-balance DPO
3 - Multicast MPLS tunnel
Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to .
4 - Resolve a path via a local label (of an mLDP LSP)
For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP.
5 - MPLS disposition path sets RPF-ID
For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet.
6 - RPF check with per-entry RPF-ID
An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface.
Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This patch deprecates stack-based thread identification,
Also removes requirement that thread stacks are adjacent.
Finally, possibly annoying for some folks, it renames
all occurences of cpu_index and cpu_number with thread
index. Using word "cpu" is misleading here as thread can
be migrated ti different CPU, and also it is not related
to linux cpu index.
Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
1) 16-8-8 stride. Reduce trie depth walk traded with increased memory in the top PLY.
2) separate the vector of protocol-independent (PI) fib_table_t with the vector of protocol dependent (PD) FIBs. PD FIBs are large structures, we don't want to burn the memory for ech PD type
3) Go straight to the PD FIB in the data-path thus avoiding an indirection through, e.g., a PLY pool.
Change-Id: I800d1ed0b2049040d5da95213f3ed6b12bdd78b7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I19b16d3e04a187ffe736fae868941957c70edf62
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
1 - make the default route non-special, i.e. like any other less specific route. Consequently, all buckets have a valid valid index of either a leaf or a ply. Checks for special indeices in the data-path can thus be removed.
2 - since all leaves are now 'real' i.e. they represent a real load-balance object, to tell if a ply slot is 'empty' requeirs chekcing that the prefix length of the leaf occupying the slot is slot than the minium value for that ply.
3 - when removing a leaf find the cover first, then recurse down the ply and replace the old leaf with the cover. This saves us a ply walk.
Change-Id: Idd523019e8bb1b6ef527b1f5279a5e24bcf18332
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ib2189d01e8bc61de57404159690fb70f89c47277
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
use a 32bit mask in the adjacency to AND with the IP address and OR into the rewrite.
Change-Id: I80b0f246c18fd74f3e43c5d49e25833412f34665
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
after:
TenGigabitEthernet5/0/1-output active 107522 17375708 0 7.22e0 161.60
TenGigabitEthernet5/0/1-tx active 107522 17375708 0 6.93e1 161.60
ip4-input-no-checksum active 107522 17375708 0 2.52e1 161.60
ip4-lookup active 107522 17375708 0 3.10e1 161.60
ip4-rewrite active 107522 17375708 0 2.52e1 161.60
before
TenGigabitEthernet5/0/1-output active 433575 110995200 0 6.95e0 256.00
TenGigabitEthernet5/0/1-tx active 433575 110995200 0 7.14e1 256.00
ip4-input-no-checksum active 433575 110995200 0 2.66e1 256.00
ip4-lookup active 433575 110995200 0 3.29e1 256.00
ip4-rewrite active 433575 110995200 0 2.59e1 256.00
Change-Id: I46405bd22189f48a39f06e3443bb7e13f410b539
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Drop comes before lookup when enabled. is_first_or_last is not required when setting a feature, the anchor is added in find_config_with_features().
Don't make the PG interfaces automatically L3 enabled, this way we can have tests that check the L3 protocol disbaled behaviour.
Change-Id: Icef22a920b27ff9cec6ab2da6b05f05c532cb60f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
node_index memeber from the rewrite for space - this is only used for formtting
before:
ip4-rewrite * * * * 2.66e1 256.00
after:
ip4-rewrite * * * * 2.40e1 256.00
Change-Id: Ic397150727cad38811564777419ad6bd26b8a3a6
Signed-off-by: Neale Ranns <nranns@wasa-ucs-11.cisco.com>
|
|
Change-Id: I73154179e78aeae5f879125237bce593d0978fae
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ifdd2b204ecf7d855f1269c11224b9c825311904d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ibe1734aeb94bc17cd8d8bc6f35ca7b780aaa9599
Signed-off-by: AkshayaNadahalli <anadahal@cisco.com>
|
|
has an address configured (VPP-601)
Change-Id: I311fc264f73dd3b2b3ce9d7d1c33cd0515b36c4a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I49e5ce0aae6e4ff634024387ceaf7dbc432a0351
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match
- Replication represented via a new replicate DPO.
- RPF configuration and data-plane checking
- data-plane signals sent to listening control planes.
The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast.
'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests.
Updated applications to use the new MIFB functions;
- IPv6 NS/RA.
- DHCPv6
unit tests for these are undated accordingly.
Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I953b3888bbc6d8a5f53f684a5edc8742b382f323
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23
Signed-off-by: Damjan Marion <damarion@cisco.com>
|