aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/ip/ip4_forward.c
AgeCommit message (Collapse)AuthorFilesLines
2018-05-23VPP-1283: IPv4 PMTU missing MTU value in ICMP4 message.Ole Troan1-30/+39
Change-Id: I7a4133c59ff45b0744b48e246a049d9f015026fc Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-15No overlapping sub-nets on any interface in the same table/VRF (VPP-943)Neale Ranns1-25/+38
DBGvpp# set int ip addr loop0 10.10.10.10/24 DBGvpp# set int ip addr loop0 10.10.10.11/24 set interface ip address: failed to add 10.10.10.11/24 which conflicts with 10.10.10.10/24 for interface loop0 Change-Id: Iba63ffafbd36b6146ce86adb78139da9d55b40ba Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-18Mcast rewrite optimisationsNeale Ranns1-3/+25
hard code the address mask offsets. This are protocol specific and only used on ethernet when used at all. Change-Id: Ib1f6f33682f53254ffbb5a241a1583e65420e0c7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-13Revert "MTU: Setting of MTU on software interface (instead of hardware ↵Damjan Marion1-57/+41
interface)" This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa. Reverting as this patch is causing following crash: 0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails Aborted Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13MTU: Setting of MTU on software interface (instead of hardware interface)Ole Troan1-41/+57
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-21reassembly: feature/concurrencyKlement Sekera1-14/+3
This change makes ip reassembly an interface feature, while adding concurrency support. Due to this, punt is no longer needed to test reassembly. Change-Id: I467669514ec33283ce935be0f1dd08f07684f0c7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-18Remove unnumbered configuration on interface deleteNeale Ranns1-1/+2
Change-Id: Iae5532c3d53e208831f3b2782242d9e59d367087 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-016RD: Rewritten 6RD RFC5969 support.Ole Troan1-1/+2
Change-Id: Ic30fbcb2630f39e45345d7215babf5d7ed4b33a0 Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-12Improve MTU handlingNeale Ranns1-13/+30
- setting MTU on an interface updates the L3 max bytes too - value cached in the adjacency is also updated - MTU exceeded generates ICMP to sender Change-Id: I343ec71d8e903b529594c4bd0543f04bc7f370b3 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-09ip4_forward: set pkt error in case potential memory corruptChun Li1-0/+2
Change-Id: Ib9eb65d2ba166f5883a8ce8d37298c696113f2be Signed-off-by: Chun Li <chunl2@cisco.com>
2018-02-08ip: move lookup inline functions to header fileVijayabhaskar Katamreddy1-372/+1
Needed to allow other code paths to reuse them. Change-Id: I9e469527c6b2e9a6fec7af5f17d8b400a2e85826 Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-02-07classifier-based ACL: refactor + add output ACLAndrew Yourtchenko1-0/+7
For implementation of MACIP ACLs enhancement (VPP-1088), an outbound classifier-based ACL would be needed. There was an existing incomplete code for outbound ACLs, it looked almost exact copy of input ACLs, minus the various enhancements, trying to sync that code seemed error-prone and cumbersome to maintain in the longer run. This change refactors the input+output ACLs processing into a unified routine (thus any changes will have effect on both), and also adds the API to set the output interface ACL, with the same format and semantics as the existing input one (except working on output ACL of course). WARNING: IP outbound ACL in L3 mode clobbers the ip.* fields in the vnet_buffer_opaque_t, since the code is using l2_classify.* The net_buffer (p0)->ip.save_rewrite_length is rescued into l2_classify.pad.l2_len, and used to rewind the header in case of drop, so that ipX_drop prints something sensible. Change-Id: I62f814f1e3650e504474a3a5359edb8a0a8836ed Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-02-01IPv4/6 reassemblyKlement Sekera1-3/+10
Change-Id: Ic5dcadd13c88b8a5e7896dab82404509c081614a Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-01-31Improved tracing for the IP[46] not-enabled case.Neale Ranns1-9/+9
now we get 00:00:03:665501: pg-input ... 00:00:03:665681: ethernet-input ... 00:00:03:665691: ip6-input UDP: 2001::1 -> ffef::1 tos 0x00, flow label 0x0, hop limit 64, payload length 108 UDP: 1234 -> 1234 length 108, checksum 0x7b25 00:00:03:665695: ip6-not-enabled UDP: 2001::1 -> ffef::1 tos 0x00, flow label 0x0, hop limit 64, payload length 108 UDP: 1234 -> 1234 length 108, checksum 0x7b25 00:00:03:665706: error-drop ethernet-input: no error Same goes for IPv4 Change-Id: Ia360df39b43281d3a0aa1b686f04b73cfa37c546 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-30Allow the provider of a midchain adjacency to pass context data that is ↵Neale Ranns1-3/+6
returned in the fixup function Change-Id: I458e6e03b03e27775df33a2fd302743126d6ac44 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-09DVR: run L3 output featuresNeale Ranns1-1/+1
- rename l2_bridged to is_dvr. Including on the ip.api this was new in the 18.01 release so no compatability issues. - steal the free space in vnet_buffer_opaque_t for use with flags. - run the ipX-output feature arc from the DVR DPO Change-Id: I040e5976d1dbe076fcdda3a40a7804f56337ce3f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-15Fix icmp/udp/tcp punt/drop pathsVijayabhaskar Katamreddy1-2/+2
Send packets to ip4/6_punt/drop nodes instead of error-drop/punt nodes dbarach: clean up an annoying checkstyle issue: indent 2.2.10 (OpenSUSE version) and indent 2.2.11 (Ubuntu / CentOS versions) had an artistic disagreement about ip_frag.c. Change-Id: I660bee28a064af9c6c70371363081e941d1c3a94 Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-12-13IP bi-direction multicast - same cable check on egressNeale Ranns1-1/+16
Change-Id: I655382f7f74181dd7c795a2b22f151f76b50e793 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-13Separate heap for IPv4 mtriesNeale Ranns1-0/+29
Change-Id: I497e9f6489dd35219bcf2b51ac992467aac4c8eb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-29Add some indent-off to the node declarations in ip4-forwardNeale Ranns1-19/+42
Change-Id: Icab8f1411da22bd56ef0de3b100eaa9519a42f52 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-07vnet: ip4/6_local-> don't drop TCP/UCP marked for cksum calc fixJakub Grajciar1-7/+7
Change-Id: Id14826eefe43168747c8ba69b3b600441a7d4047 Signed-off-by: Jakub Grajciar <Jakub.Grajciar@pantheon.tech>
2017-11-03vnet: ip4/6_local->don't drop packet if marked for TCP/UDP offload cksum ↵Jakub Grajciar1-5/+14
calculation Change-Id: I62f625a93e5d818caef382316035cd5447bd8fef Signed-off-by: Jakub Grajciar <Jakub.Grajciar@pantheon.tech>
2017-10-15ip: avoid arp assert if out of buffers (VPP-1030)Florin Coras1-0/+4
Change-Id: Ia31b978c6c1619c3e0075a84fcbbb6ccbf1c0076 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-10session: add support for application namespacingFlorin Coras1-0/+5
Applications are now provided the option to select the namespace they are to be attached to and the scope of their attachement. Application namespaces are meant to: 1) constrain the scope of communication through the network by association with source interfaces and/or fib tables that provide the source ips to be used and limit the scope of routing 2) provide a namespace local scope to session layer communication, as opposed to the global scope provided by 1). That is, sessions can be established without assistance from transport and network layers. Albeit, zero/local-host ip addresses must still be provided in session establishment messages due to existing application idiosyncrasies. This mode of communication uses shared-memory fifos (cut-through sessions) exclusively. If applications request no namespace, they are assigned to the default one, which at its turn uses the default fib. Applications can request access to both local and global scopes for a namespace. If no scope is specified, session layer defaults to the global one. When a sw_if_index is provided for a namespace, zero-ip (INADDR_ANY) binds are converted to binds to the requested interface. Change-Id: Ia0f660bbf7eec7f89673f75b4821fc7c3d58e3d1 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-10punt and drop features:Neale Ranns1-72/+5
- new IPv4 and IPv6 feature arcs on the punt and drop nodes - new features: - redirect punted traffic to an interface and nexthop - police punted traffic. Change-Id: I53be8bf4e06545add8a3619e462de5ffedd0a95c Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-09NAT: hairpinning rework (VPP-1003)Matus Fabian1-1/+9
Change-Id: I7c6911cd6ac366fe62675fd0ff8b0246a25ea1db Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-10-04[aarch64] Fixes CLI crashes on dpaa2 platform.Christophe Fontaine1-3/+3
- always use 'va_args' as pointer in all format_* functions - u32 for all 'indent' params as it's declaration was inconsistent Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79 Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
2017-10-03Repair vlib API socket serverDave Barach1-8/+16
- Teach vpp_api_test to send/receive API messages over sockets - Add memfd-based shared memory - Add api messages to create memfd-based shared memory segments - vpp_api_test supports both socket and shared memory segment connections - vpp_api_test pivot from socket to shared memory API messaging - add socket client support to libvlibclient.so - dead client reaper sends ping messages, container-friendly - dead client reaper falls back to kill (<pid>, 0) live checking if e.g. a python app goes silent for tens of seconds - handle ping messages in python client support code - teach show api ring about pairwise shared-memory segments - fix ip probing of already resolved destinations (VPP-998) We'll need this work to implement proper host-stack client isolation Change-Id: Ic23b65f75c854d0393d9a2e9d6b122a9551be769 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-20Add ip6-local feature arcPierre Pfister1-1/+7
ip4-local feature arc existed but not ip6-local one. This patch also adds node name to the 'show ip local' command and fixes a minor include issue in vnet/ip/ip4.h file. Change-Id: I9bb8a7159917d58f89afcce974680de20d946a70 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2017-09-15dpdk: cli to check for buffer leakageFlorin Coras1-0/+1
Use buffer pre_data and existing buffer trace trajectory code to find out dpdk buffer leakages. Change-Id: I26a5d8bd2f23d01cb6070ffc3ddcc6d3d863b575 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-11arp/glean: fix hash computationFlorin Coras1-1/+2
Change-Id: Ifef8a9328bb865f6ddb041bafe3699153f89755a Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-97/+4
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-16ip4: cleanup ip localFlorin Coras1-153/+85
Change-Id: I4f751b0181f25ec6c4abd3a9c7b0386d80743b3a Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-08-11Fix tcp multi buffer segments retransmissionFlorin Coras1-5/+7
- Fix tcp/udp sw checksum computation - Fix allocation of multi buffer tcp segments for retransmits - Send FIN only if/when tx fifo is empty Change-Id: I2e43a14b87a72c9e547b4339b9a51811cf5732c4 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-08-08L2 over MPLSNeale Ranns1-3/+3
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-02Fix vpp crash sending arp or probing neighb (VPP-917)Pavel Kotucek1-0/+14
VPP crash when trying to send arp message or to probe neighbor over interface with IP address but without hw address (local0 and tunnels - vxlan, gre, ...) Change-Id: I08a1c97d3ea913fc11b2886cf73b2ccc31356664 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-07-20Fix coverity issue introduced with IP checksum offload commitDamjan Marion1-3/+3
Change-Id: Ib5ad1369678389534426902ce698bccf7a6d9ec2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-18TCP/UDP checksum offload APIDave Barach1-3/+6
Change-Id: I2cb6ce4e29813f6602b14e6e61713fb381fbcef8 Signed-off-by: Dave Barach <dave@barachs.net>
2017-07-14vnet_buffer_t flags cleanupDamjan Marion1-19/+19
Change-Id: I123eccea98abafeb31f25d2a162501e2eded60d4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-14Introduce l{2,3,4}_hdr_offset fields in the buffer metadataDamjan Marion1-3/+3
To save space in the first cacheline following is changed: - total_length_not_including_first_buffer moved to the 2nd cacheline. This field is used only when VLIB_BUFFER_TOTAL_LENGTH_VALID and VLIB_BUFFER_NEXT_PRESENT are both set. - free_list_index is now stored in 4bits inside flags, which allows up to 16 free lists. In case we need more we can store index in the 2nd cachelin Change-Id: Ic8521350819391af470d31d3fa1013e67ecb7681 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-23IP4/IP6 FIB: fix crash during interface deletePavel Kotucek1-0/+17
after deleting a sub interface with IP4/IP6 address vpp crash Change-Id: Ie768ca845b9e2394f61e2a8e9722a80a788746e7 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-06-01Fix 'ip probe' on /32Neale Ranns1-24/+26
Change-Id: Ib874ad93357500b2c425d75cf48834264b2183fc Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-26MPLS lookup DPO does not pop the label (nor does it handle replicate)Neale Ranns1-1/+0
Change-Id: I7de6b96631d1645d0eadd38525860d84d78e316d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-03change ip4_drop_node node register coding formatflyingeagle231-2/+2
Change-Id: Id4fdf2abf3bae3b14cdc6489ca16d2007da78d07 Signed-off-by: flyingeagle23 <wang.hui56@zte.com.cn>
2017-04-26IP Flow Hash Config fixesNeale Ranns1-3/+2
- the flow hash config is (and was) cached on the load-balance object so the fib_table_t struct is not used a switch time. Therefore changes to the table's flow hash config need to be propagated to all load-balances and hance all FIB entries in the table. - enable API for setting the IPv6 table flow hash config - use only the hash config in the fib_table_t object and not on the ipX_fib_t - add tests. Change-Id: Ib804c11162c6d4972c764957562c372f663e05d4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-24Improve Load-Balance MAPsNeale Ranns1-59/+78
- only build them for popular path-lists (where popular means more than 64 children) the reason to have a map is to improve convergence speed for recursive prefixes - if there are only a few this technique is not needed - only build them when there is at least one path that has recursive constraints, i.e. a path that can 'fail' in a PIC scenario. - Use the MAPS in the switch path. - PIC test cases for functionality (not convergence performance) Change-Id: I70705444c8469d22b07ae34be82cfb6a01358e10 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-13Remove unsed parameter from fib_table_entry_special_add() (only used in FIB ↵Neale Ranns1-4/+2
tests). The DPO was incorrectly initialised with FIB_PROTO_MAX Change-Id: I962df9e162e4dfb6837a5ce79ea795d5ff2d7315 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-11Remove usued, redundant and deprecated code from lookup.hNeale Ranns1-9/+10
Change-Id: Ic16bc10d0b2877b2afdf052615f9334f31b9519f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-0/+20
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-06Use thread local storage for thread indexDamjan Marion1-17/+17
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>